Used Plastic Injection Moulder for sale (7,594)

Condition: good (used), Year of construction: 2011, spindle diameter: 40 mm, number of spindles: 7, Weinig Unimat 500 Year of manufacture: 2011 Planing width: 230 mm Planing height: 120 mm Spindle diameter: 40 mm Infeed table: 2,000 mm Number of rollers in the table: 2, driven with 150 mm width Dwsdpfxezzv Abs Adcjb Feed rate: 5 - 30 m/min Feed motor: 5 kW Memory function: 3 sets of radially CNC-controlled adjustments for spindles 3, 5, and 6 Spindle arrangement: Bottom: 7.5 kW Right: Left: 7.5 kW Right: 5.5 kW Top: 7.5 kW Top: 7.5 kW Bottom: 11 kW

Condition: used, Year of construction: 2006, Overview Dwsdpfxezxtzij Adcjb This SIDEL SBO 2 XL Compact is a two-cavity PET stretch blow moulding machine built in 2006 for large-format containers of up to 10 litres. It pairs a Sidel preform tipper, hopper and feeder with a Sidel Compact linear oven with 5 heating modules and a blowing station for two moulds. Output depends on bottle size: approx. 2,400 bottles/hour at 500 ml, approx. 2,000 bottles/hour at 5 litres and approx. 1,000 bottles/hour at 10 litres. The machine is currently set up for preforms with a 48/41 neck finish and last produced 8-litre PET bottles. Its hour counter reads approx. 12,500 hours. It ran in a plastics converting plant until March 2026 and was then dismantled by skilled technicians and stored dry. Large-format blow moulders of this size are rarely offered on the second-hand market. Moulds are not included. Technical data - Manufacturer: SIDEL - Model: SBO 2 XL Compact - Year of manufacture: 2006 - Machine type: PET stretch blow moulding machine - Bottle size range: approx. 2.0 to 10.0 litres - Current bottle format: 8 litre PET - Current neck finish: 48/41 - Mould stations: 2, block moulds - Moulds: not included - Oven: Sidel Compact linear oven - Heating modules: 5 - Output at 500 ml: approx. 2,400 bottles/hour - Output at 5 litres: approx. 2,000 bottles/hour - Output at 10 litres: approx. 1,000 bottles/hour - Operating hours: approx. 12,500 h - Control: Siemens SIMATIC touchscreen HMI Equipment - Sidel preform tipper - Sidel preform hopper and feeder - Sidel Compact linear oven with 5 heating modules - Sidel blowing station for 2 moulds - Sidel electrical cabinet - Sidel drive panels with Siemens touchscreen control - Safety enclosure with transparent guard panels - Electrical and mechanical drawings, service and maintenance manuals, spare parts books Condition Used - good working condition. The machine was serviced by Sidel and by in-house technicians under a regular preventive maintenance schedule, and ran in production until March 2026. It is now dismantled and stored dry and can be inspected in stored condition. Availability Immediately. Location: France. Ready for loading and shipment.

Condition: good (used), Year of construction: 1997, Weinig Profimat 23E Planing width: 230 mm Planing height: 120 mm Dwodjzzlpkjpfx Adcsb Spindle diameter: 40 mm Infeed table length: 2,000 mm Feed motor: 3 kW Spindle arrangement: Bottom: 5.5 kW Right: Left: 7.5 kW Top: 11 kW Bottom: 7.5 kW

Condition: excellent (used), Year of construction: 2012, input voltage: 400 V, conveyor belt width: 850 mm, total width: 1,650 mm, total length: 8,100 mm, total height: 2,050 mm, For sale: Very well-maintained Midrange Croissant machine from Rademaker Brand: Rademaker Included: - Mould unit Dwodpfx Adoxzt Rioceb - V Moulder - Conveyor - Midrange Croissant machine Year of manufacture: 2012 Conveyor belts year: 2017 Documentation / electrical diagrams available Full pallet with spare parts Operating hours: 9,153 hours Capacity: approx. 7,200 pieces per hour Belt width: 850 mm It is possible to inspect the machine at our location. If you have any questions or comments, please feel free to contact us. Transport by arrangement. Kind regards, Leo Holland

Condition: excellent (used), Year of construction: 2000, Robust pivoting milling machine T 26, pivotable from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Pivot angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the pivot angle is displayed in the upper display, which can then be set on the stop, thus allowing settings to be implemented according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for total adjustment and infeed fence separately, as well as input of the cutter diameter, whereby the cutting depth is calculated automatically. Stop with lifting device, pivotable to the side (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Folding stop for mortise milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron fence, left 500mm, right 500mm with two insert strips. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed socket, switchable from the control unit. Comfort stand with electrically height-adjustable feed support, which can be pivoted to the side for machine maintenance and then easily locked into place. Dust extraction nozzle 2 x 120mm. Compressed air connection 6 bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dodpfxozbm Tfj Adcjwb Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot Dwsdpfx Ajx Uqb Iedcjb

Condition: new, Engel bimetallic screw cylinder, new and unused Diameter: 105 mm LD 22 Unit 4550: 3380 cm3 Dedpfex Up U Tjx Adcowb Unit 5550: 3700 cm3

Condition: excellent (used), Year of construction: 2005, KM 500/2700C2 Technical Specifications Clamping Side: Clamping Force: 5000 kN Djdszgwbvopfx Adcewb Tie Bar Dimensions (H x V): 900 x 800 mm Minimum Installation Height: 480 mm Maximum Platen Distance: 1650 mm Centering: 200 mm Mold Weight: 7900 kg Injection Side: Screw Diameter: 80 mm Displacement: 1433 cc Injection Pressure: 1829 bar Equipment: MC 4 Control System Core Pulls: 2+2 Machine is sold without robots and peripherals!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, KM 500-3500 C2 Year of manufacture: 2007 Operating hours in automatic mode: 60,000 h Clamping unit Clamping force: 5,000 kN Mounting plate dimensions: 1270 x 1310 mm Distance between tie bars: 900 x 800 mm Min./max. mold height: min. 480 mm Maximum opening stroke: 1,650 mm Dsdpfezgwa Ejx Adcewb Injection unit Screw diameter: 80 mm Injection volume: 1,543 cm³ Shot weight: 1,404 g Injection pressure: 2,205 bar Electrical and hydraulic equipment Nominal pump motor power: 90 kW Heating capacity: 44 kW Dimensions and weight Net weight with control cabinet: 27,090 kg Dimensions (L x W x H): 7.65 m x 2.55 m x 2.55 m

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical Data Year of manufacture: 2006 Clamping Unit Clamping force: 8000 kN Max. platen size: 1520 mm Clear tie-bar distance: 1170 mm Min. mold height: 700 mm Max. mold height: 1300 mm Max. platen opening: 2300 mm Max. opening stroke/mold height: 1000 mm Ejector stroke: 300 mm 1st Injection Unit Screw diameter: 105 mm Shot volume: 4160 ccm Dwedpfx Adsx Up Utecjb 2nd Injection Unit Screw diameter: 90 mm Shot volume: 3050 ccm

Condition: excellent (used), Year of construction: 2007, Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of manufacture: 2007 Control system: MC 4 Clamping Unit: Clamping force: 650 t Opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum platen daylight: 1,750 mm Tie bar spacing (h x v): 1,100 x 900 mm Platen dimensions (h x v): 1,510 x 1,370 mm Centering (nozzle-ejector plate): 200 / 200 mm 1st Injection Unit: Screw diameter: 80 mm Maximum shot weight in PS: 1,400 g Shot volume: 1,543 cm³ Injection pressure: 2,205 bar 2nd Injection Unit: Screw diameter: 45 mm Shot weight in polystyrene: 278 g Shot volume: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x air valves 16-fold cascade 3 x core pullers on moving platen 3 x core pullers on fixed platen 20 x hot runner controllers Dwodpozgwbcofx Adcjb Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Overall size (L x W x H): 7.8 x 2.5 x 2.5 m Operating hours: 45,400 h Machine can also be operated as a single-component machine (1K).

Condition: excellent (used), Year of construction: 2003, operating hours: 67,092 h, BATTENFELD HM 10000-9200 Manufacturer: BATTENFELD Model: HM 10000-9200 Control system: UNILOG B4 Year of manufacture: 2003 Operating hours: 67,092 h Technical data – Clamping unit Clamping force: 10,000 kN Tie bar spacing (h x v): 1120 x 1400 mm Platen size (h x v): 1960 x 1690 mm Minimum mold height: 550 mm Maximum mold height: 1,020 mm Maximum daylight: 2,120 mm Opening stroke: 1,100 mm Dwodpfox Up Rhjx Adcob Ejector stroke: 300 mm Ejector force: 118 kN Movable platen centering diameter: 250 mm Fixed platen centering diameter: 315 mm Technical data – Injection unit Screw diameter: 120 mm Shot volume: 5,655 cm³ Injection pressure: 1,632 bar Screw length: 22 L/D Screw stroke: 500 mm Screw speed: 130 min⁻¹ Screw torque: 11,370 Nm Plasticizing rate: 144 g/s PS Free discharge plasticizing rate: 1,144 g/s PS Number of heating zones: 8 Nozzle stroke: 700 mm Dimensions & Weight Machine dimensions (L x W x H): 11.6 m x 2.9 m x 2.5 m Total weight: 76,500 kg Equipment Display language: German CompactFlash drive 4x hydraulic core pulls Leveling elements EUROMAP 12 interface Interface for temperature control unit Enlarged oil cooler 16x mold heating circuits

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical Data Year of manufacture: 2007 Clamping side Clamping force: 1300 t Opening stroke/installation height max.: 2300 mm Distance between clamping plates max.: 4000 mm Dwjdpfxozgv Uue Adceb Tool installation height min./max.: 1000 - 1700 mm Clamping plate max. height: 1910 mm Tool size min.: 1000 - 1700 mm Distance between tie bars: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Injection side Screw diameter: 135 mm Injection volume: 8588 cm³ Injection pressure: 1390 bar Injection weight: 7729 g/shot Core pulls AWS/DS: 1/1 Needle gate pneumatic: 1 The machine is supplied with a Kuka robot and can be inspected during production.

Condition: excellent (used), Year of construction: 2007, Engel Duo 11000H/7000H/1300 Year of manufacture: 2007 Technical Data Dodpfex Up Rnox Adcswb Clamping Unit Clamping force: 13,000 kN Opening stroke: 3,000 mm Min. mould installation height: 1,000 mm Max. mould installation height: 1,800 mm Max. daylight between platens: 4,000 mm Mounting platen size: 2,200 x 1,990 mm Clear tie bar spacing: 1,530 x 1,275 mm Injection Unit 1 Screw diameter: 120 mm Dosing stroke: 570 mm Max. shot volume: 6,450 cm³ L/D screw ratio: 20 Specific injection pressure: 1,794 bar Nozzle stroke: 1,000 mm Number of heating zones: 6 Injection Unit 2 Screw diameter: 120 mm Dosing stroke: 4,800 mm Max. shot volume: 5,430 cm³ Specific injection pressure: 1,370 bar Nozzle stroke: 1,000 mm

Condition: used, Year of construction: 1999, Second-hand machine Year of manufacture: 1999 Features and technical specifications: - with swivelling spindle: 0° – 45° - with aluminium roller table - Table dimensions: 1100 x 620 mm - Working height: 880 mm - Roller table dimensions: 900 x 200 mm - Roller table travel: 900 mm - Milling spindle diameter: 30 mm - Milling spindle stroke: 150 mm - Speeds: 3100/4600/6200/8000 rpm Dwodpfjzk N Tfjx Adcjb - Motor: 4 kW - with 4-roller feed unit - Dimensions: 1200 x 1000 x 1400 mm - Weight: approx. 490 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2002, Second-hand machine Year of manufacture: 2002 Features and technical specifications: - Control display on the upper control panel - Control panel can be swivelled and extended - Swivelling milling spindle - Swivel range of the milling spindle: +/- 45° - Milling spindle stroke: 150 mm - HSK80 quick-change milling spindle system - Milling arbor 30 mm - Electromechanical spindle locking mechanism - Frame support 1,340 mm at the machine table, extendable by approx. 700 mm - Table extension on the right - Table extension on the left - 2-axis positioning control for height and swivel adjustment, digital LED displays - Voltage 400 V / 50 Hz Dwjdpszk N Sbsfx Adcob - Power socket - Automatic motor start via contactor control - 7.5 kW main motor, frequency-controlled / continuously variable speed control - Milling stop type 203 with handwheel adjustment on both sides - Centrex Type 1624 milling protection and clamping device - ZEROMASTER reference dimension setting device - Wegoma Variomatic 4N feed unit: 4-roller feed unit Variable feed speed 2–18 m/min Clockwise and anti-clockwise rotation Suitable for both horizontal and vertical use Memo-Lock system for easy swivelling and repositioning Digital height display Height adjustment from the operator’s side Generously sized locking levers Maximum reach 1,050 mm thanks to extended tube - Dimensions: 260 x 180 x 130 cm - Weight: approx. 1,100 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1984, Second-hand machine Year of manufacture: 2007 Features and technical specifications: - Motor 4.7/5.7 kW, pole-changing - with clockwise/anti-clockwise rotation - MK 5/30 mm milling arbor - Height adjustment via handwheel - Speeds: 3000/4500/6000/9000 rpm - Milling stop with metal jaws Mounted on a round turntable and therefore rotatable through 360° Dwjdpjzk N R Rjfx Adcjb - with table extension on both sides, featuring extendable frame supports - with a roller table attached to the left-hand side Please note! The table extension was fitted at a later date! To use the roller table, it must this must be removed again! - with 4-roller feed mechanism, built in 2007 - Dimensions: 240x65x120 - Weight approx. 900 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1994, Second-hand machine Year of manufacture: 1994 Features and technical specifications: - Length of the planing table: 2,100 mm - Tool spindle diameter: 30 mm - Planing head diameter: 100 mm - Speed of the planing shafts: 6,000 rpm - Working width: 30–180 mm - Working height: 6–120 mm - Motor power (bottom, left, right): 3.7 kW each - Upper motor power (thickness shaft): 5.5 kW - Feed speed: 6 and 12 m/min Dwodpfx Aszk N I Asdcjb - Electric height adjustment - with 1/10-step control - including cycle-controlled feed roller - Including planing heads - Extraction ports 160/120/120/140 mm Availability: available at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1963, Rigid milling machine Year of manufacture: 1963 Spindle diameter 30 mm Dwodpfxjzk N Iie Adcsb Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 1981, Second-hand machine Year of manufacture: 1981 Features and technical specifications: Dedpfx Ajzk N Dqedcewb - with dual pneumatic lifting spindle - Mandrel diameter: 40 mm - with a long table length: 2500 mm - with extendable frame support - with milling stop featuring Panhans metal stop jaws and fine adjustment Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Dwodpozk Nq Rsfx Adceb Features and technical specifications: Automatic height and swivel adjustment of the spindle with decimal pulses Mechanical display of spindle height and electrical display of tilt adjustment Hinged hood with aluminium guides Adjustable table top opening via table slide System for quick tool change with long tables and extendable workpiece support Table size 2500 x 780 mm Spindle adjustment – 45° to +45° Spindle diameter 30 mm Spindle stroke 230 mm Max. table opening: 300 mm 5.5 kW motor with automatic star-delta start with clockwise and anti-clockwise rotation Speeds: 3000/4500/6000/8000/10000 rpm Electronic programming of spindle height, spindle tilt and stop position (milling stop) Extraction at top and bottom: 120 mm Dimensions 2570 x 1450 mm Weight approx. 670 kg Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, machine is unused Features and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Useful length of the spindle: 125 mm - Spindle mandrel diameter: 30 mm - Speed display: LED display on the front of the machine - Max. tool diameter (standard): 240 mm - Maximum tool diameter that can be lowered: 230 mm - Maximum tool diameter for profile milling: 240 mm - Maximum tool diameter for tenon milling: 320 mm - Work table length: 1,200 mm - Work table width: 530 mm Dwjdpszk Nn Aefx Adcsb - Table height: 900 mm - Slide carriage length: 1,200 mm - Slide carriage width: 360 mm - Slide carriage height: 142 mm - Extraction nozzle diameter: 2 × 120 mm - Drive motor power: 5.0 kW - Mains voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: at short notice Storage location: DE-63934 Röllbach

Condition: used, Year of construction: 1996, Second-hand machine Year of manufacture: 1996 Djdpfxozk Nnpe Adcswb Features and technical specifications: - The basic principle of Hofmann machines is their tried-and-tested cast iron construction - Grey cast iron is by far the leader in vibration damping, compressive strength and load-bearing capacity - Milling spindle 30 mm with clockwise and anti-clockwise rotation - Milling stop with stop jaws, central adjustment and single-sided fine adjustment of the jaws - Manual height adjustment with digital display and zero-reset button - Table dimensions: 1200 x 820 mm - Table height: 890 mm - Motor power: 5.0/6.2 kW - Spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm - Height adjustment: 125 mm - Chip extraction connection: 110/120 mm - with Holz Her 2-roller feed mechanism Weight: 850 kg Availability: by arrangement Storage location: 63934 Röllbach

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mold opening force: 220 kN Drive force of moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Clearance (h x v): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold installation height: 380 mm Opening distance: 1,300 mm Ejector stroke: 250 mm Ejector force front/rear: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry running capacity: 1,550 1/h Oil capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mold weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement volume: 1,047 cm3 Shot weight for PS: 953 g Injection rate: 527 cm3/s Screw speed Standard / Option: 1/min 285/349 Screw speed Standard or Stage 1: 95 PS Screw speed Option or Stage 2: 117 PS Nozzle system force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color display and Floppy disk drive (3.5 inches) for data backup Plasticization: 1 complete thermoplastic plasticization unit in wear-resistant design, screw diameter 70 mm with check ring and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 9926ä Djdpfoxu Uvajx Adcjwb

Condition: used, Year of construction: 2024, MACHINE PROFILE: 3,800 kN (420 US tons) IMM ===== Machine ID: • Injection Unit: 265 • Clamping Unit: 380 • Weight: 21,300 kg Clamping Unit Specifications: • Force: 3800 kN (388 tons / 420 US tons) • Tie-bar Spacing: 830x830 mm • Platen Size: 1190x1190 mm • Stroke (Open/Eject): 700 / 210 mm • Ejector Force: 90 kN • Mold Height (Min/Max): 300 / 750 mm (+800 option) • Max Mold Weight: 3.8 tons • Dry Cycle: 2.3s / 500mm Dedpfezzv Tgsx Adcowb Injection Unit Specifications (By Screw: 25 / 30 / 35 mm): • L/D Ratio: 24 / 24 / 20 • Capacity: 74 / 106 / 144 cm³ • Rate: 98 / 141 / 192 cm³/s • Recovery Rate: 10 / 15 / 22 g/s • Pressure: 2700 / 2700 / 2000 bar • Stroke / Speed: 150 mm / 420 rpm • Nozzle (Stroke/Force): 305 mm / 40 kN • Heating Capacity: 9.2 kW