Used Pet Blow Moulding Machine for sale (65,493)

Condition: used, Year of construction: 2004, operating hours: 94,000 h, clamping force: 150 kN, displacement volume: 124 cm³, injection pressure: 2,420 bar, overall weight: 7,900 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request Dede Ahrw Uepfx Acyjwd terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2006, operating hours: 30,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Dodpeymn Rvofx Acyswd Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Year of construction: 2004, condition: used, Operating pressure: 210bar, injection unit force: 111kN, clamping force: 600kN, max. opening stroke: 340mm, mold installation height: 200-500mm, rated current, circuit 1: 29A, rated power, circuit 1: 15kW, supply voltage, circuit 2: 400V/50Hz, rated current, circuit 2: 66A, rated power, circuit 2: 46kW, AC control voltage: 230V, DC control voltage: 5/±15/24V, protection rating: IP54, weight: 6.63t, operating hours: 96,973h, with CE marking and documentation. Dwedpj Ah Tyfefx Acyed

Condition: good (used), Manufacturer: DEMAG Dsdpfx Aj Aaz Taocyewd Year of manufacture: 1995 Machine number: 878-0140 Operating hours: h Type: Ergotech 250-1450 system Control system: NC4 Screw diameter: 60 mm Displacement: 763 cm³ Injection weight: 690 g Injection pressure: 1,905 bar Clamping unit: Clamping force: 250 t Holding force: 275 t Opening stroke: 675 mm Minimum/maximum tool mounting height: 330 / 710 mm Ejector stroke: 200 mm Ejector plate dimensions: 950 x 950 mm Tie bar spacing: 630 x 630 mm Plate distance: 1,385 mm Condition: good, ready for operation Equipment: 4 core pulls Handling: Robot System DR 322 Travel ranges x – y – z: 800 x 1,600 x 3,000 mm Heater connection: 27 kW Screw drive connection: 35 kW Weight: 13.5 t Dimensions: 6,400 x 1,900 x 2,300 mm

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 Dwodjgrzh Eopfx Acyod 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Year of construction: 2018, condition: used, Clamping force: 900kN, screw diameter: 30mm, L/D ratio: 22, specific injection pressure: 1540bar, calculated shot volume: 88.4cm³, max. shot weight (PS): 80.4g, tie-bar spacing (H×V): 470mm/420mm, min. mold height: 225mm, max. platen distance: 700mm, opening stroke: 475mm, ejector stroke: 150mm, ejector force: 41.2kN, control system: UNILOG B8, weight: 4200kg. Documentation available. An on-site inspection is possible. Djdpfx Acsz Hn Spoyjwd

Condition: used, Year of construction: 2008, operating hours: 2,467 h, machine/vehicle number: LC690, Used AMER filling line for still water PET, 5000 BPH, 2 blowersTechnical Specifications & Performance DataThis used bottling line is configured for still water in PET bottles and combines bottle production, conveying, rinsing, filling, capping, labeling and secondary packaging. The line includes two SMF COMBI 400 automatic PET bottle blow molding machines, an AMER rinsing-filling-capping monoblock, a SACMI LABELLING OPERA 200 RF labeling machine and an AMER shrink wrapper.Filling capacity: 4,000–5,000 bph for bottles with 30/25 mm necks.Blowing capacity: up to 4,000 bph on 1.5L bottles through two SMF COMBI 400 blowers.Labeling capacity: 12,000 bph.Shrink-wrapping capacity: 300 packs/h.Bottle range: 0.25L to 2.5L for the blow molding section.Available mold formats: 0.33L, 0.6L, 1.5L and 5.0L, depending on the machine section.Filling monoblock configuration: 16/18/6.Required installed power: 120 kW.Required hall surface: approximately 500 m².Advanced Automation & Control SystemsThe PET bottle blow molding section uses infrared preform heating with 8 segments, 14 lamps and 550 mm heating elements. The SMF COMBI 400 machines operate with a 400 V, 3-phase, 50 Hz supply and have an installed power of 56 kW per machine. The labeling machine operates at 400 V, 50 Hz and is rated at 28 kW and 47 A.The AMER filling monoblock integrates rinsing, filling and capping in a compact process block. It is equipped with a HEPA filter and an integrated CIP aggregate with disinfection, supporting hygienic beverage production and efficient internal cleaning procedures.Production Line Integration CapabilitiesThis complete bottling line is designed as an integrated PET packaging solution for still water production. Preforms are handled by the SMF hopper and supplied to the blow molding machines, while air conveying transfers formed PET bottles toward the filling section. After rinsing, filling and capping, bottles are labeled with OPP foil and transferred to the shrink wrapper for pack formation.Machine typeManufacturer / modelYearBlow Molding MachineSMF Maschinenfabrik GmbH / COMBI 4002009ChillerSMF Maschinenfabrik GmbH / HT-6A2008Filling MonoblockAMER / BLOCK2008Labeling MachineSACMI LABELLING / OPERA 200 RF2008Shrink Wrapper Dwjdpe Adtttofx Acyed

Condition: good (used), Year of construction: 2004, VC330-80 plus Year: 2004 Clamping force : 800kn Injection Unit 330 Control unit CC200 A01 Dwsdpevdqbhefx Acyjd Screw D40 Working hours 91112 1x corepull 4x digital input 4x digital output 1x signe pahse socket 1x trhee phase socket NEW PUMP

Year of construction: 1996, condition: used, lamping force: 500kN, max. holding force: 37kN, mold protection force: 3-37kN, max. opening force: 37kN, max. increased opening force: 194kN, max. opening stroke (adjustable): 375mm, min. mold installation height: 250mm, max. distance between platens: 625mm, clear distance between tie bars: 320x320mm, platen dimensions: 490x490mm, max. ejector force: 38kN, max. ejector retraction force: 26.7kN, max. ejector stroke (hydraulic): 150mm, screw diameter: 25mm, screw L/D ratio: 20, max. screw stroke: 100mm, max. shot volume: 49cm³, max. nozzle contact force: 60kN, max. nozzle retraction stroke: 180mm, total installed power: 15.5kW, length: 4030mm, width: 1850mm, height (horizontal/vertical): 2000/3060mm, weight without oil: 3.06t, an on-site inspection is possible. Djdpfx Aj Ah Tyijcyswd

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar Dwedpox D Tbmsfx Acyod YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 1994, condition: ready for operation (used), A hydraulic Battenfeld plastic injection molding machine is offered. Clamping force: 1000kN, screw diameter: 40mm, shot weight: approx. 183g, mold mounting platens X/Y: 700mm/700mm, shot volume: 201cm³, max. injection pressure: 1968bar, max. screw speed: 290rpm, nozzle contact force: 79.2kN, machine cycles: approx. 1985087, operating hours: approx. 53578h, control system: Battenfeld UNILOG 4000. Dimensions: approx. 5440mm/1550mm/2300mm, weight: approx. 5060kg. Motor, pump and inverter renewed in December 2009. An on-site inspection is possible. Dsdpfx Aszl Enhecyewd

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine As shown in the pictures, its working condition is uncertain. Overall dimensions :3100 x 1950 x 2600 mm Djdpsukn S Hjfx Acyowd Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Year of construction: 2017, condition: ready for operation (used), Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible. Dwsdpeztzqzefx Acyed

Condition: used, Year of construction: 2007, Used Blow Molding Machine SIPA SFR12 18000 bph General Features of the SIPA SFR12 Blow Molding Machine The Used Blow Molding Machine SIPA SFR12 18000 bph performs PET container stretch blow molding and SIPA manufactured it in 2007. As a result of its SFR12 configuration, which includes 12 cavities, the system reaches a nominal speed of 18,000 bottles per hour. Consequently, it delivers high production efficiency across multiple formats. Specifically, this machine processes volumes from 0.25 to 2 liters. Therefore, it fits seamlessly into high-speed bottling lines, particularly in the mineral water and soft drink industries. Moreover, thanks to its compact layout, it optimizes floor space usage. Preform Compatibility and Technical Specifications This machine processes preforms with 3-start Alaska neck finishes and supports weights ranging from 12 to 34 grams. In particular, operators can quickly change formats thanks to the integrated quick-change system, which significantly reduces downtime. In addition, the automated system feeds, tips, and orients the preforms accurately. As a result, the machine ensures a continuous and correctly aligned flow into the heating and blowing stations. Furthermore, this setup minimizes manual intervention and improves process reliability. Notably, the Used Blow Molding Machine SIPA SFR12 18000 bph maintains stable, uninterrupted production across varying operational conditions. Dodpfx Asxqmp Recyjwd Integrated Systems and Automation The machine uses a Siemens PLC for core process control; thus, it guarantees reliable and intuitive management in industrial environments. Furthermore, the system includes certified safety protections, which enhance operator safety and regulatory compliance. Additionally, the air recovery system reduces energy waste and lowers operational costs. Equally important, the rotary blowing system distributes pressure and heat evenly across all cavities. Hence, the machine ensures uniform container quality even during high-speed operation. In comparison to older models, this version offers improved thermal control and air distribution efficiency. Operational Status and Technical Documentation Currently, the Used Blow Molding Machine SIPA SFR12 18000 bph remains in storage, although it is ready for recommissioning after standard inspection or overhaul. Fortunately, the machine includes original technical manuals, available spare parts, and revision records, which together facilitate seamless installation and integration. Moreover, the documentation enables faster troubleshooting and efficient maintenance scheduling. Technical Summary for Line Integration Overall, the Used Blow Molding Machine SIPA SFR12 18000 bph delivers a robust and high-performance solution for production facilities that require consistent, flexible, and high-throughput blow molding. Because of its solid engineering and standard-format compatibility, it serves as a strategic asset for companies looking to upgrade or expand bottling capacity. Furthermore, the availability of auxiliary components and spare parts, along with comprehensive documentation, allows for rapid and reliable integration. Ultimately, this machine enhances line performance while supporting operational continuity and cost-efficiency.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, clamping force: 805 kN, screw diameter: 42 mm, injection weight: 172 g, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this high precision BOY 80M injection moulding machine. The BOY 80 is one of the most compact 80t clamp machines around, a great allrounder, fitted with the Procan 2 controller and 42mm diameter screw, which gives a shot weight of 179 (PS)g. Dedowfpqcopfx Acyewd Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Dwjdpfxsyab I Ue Acyod

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Djdpsw Rqwtofx Acyjwd

Condition: excellent (used), Year of construction: 2011, operating hours: 78,454 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, displacement volume: 678 cm³, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, Equipment: documentation/manual, warehouse no.: 503393 manufacturer: KRAUSS MAFFEI type: KM 300-1400 CX controller: MC5 Dodpfx Acsz A U Ivjyewd year of construction: 2011 operation hours: 78454 h clamping force: 3000 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar equipment included: Machine WITHOUT robot!! screen text german CEE-socket 16A pressure accumulator for parallel function of hydr.ejector and core pulling core pulling hydraulically 2x machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface for handling Schuko-socket 10A measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. Dwodpfsy Au I Ujx Acyjd The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: used, Year of construction: 2021, operating hours: 39,900 h, clamping force: 750 kN, displacement volume: 2,863 cm³, injection pressure: 1,870 bar, overall weight: 32,000 kg, screw conveyor diameter: 90 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Djdpfx Acsz H Aicoyjwd

Condition: used, Year of construction: 2013, operating hours: 55,929 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Dodpfx Acszp R I Ieyswd terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2011, operating hours: 40,885 h, overall weight: 6,500 kg, displacement volume: 49 cm³, clamping force: 110 kN, injection pressure: 2,236 bar, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Djdpfxjw N Egae Acyjwd

Condition: used, Wittmann Battenfeld 3 Vertical V 800/315 injection molding machines for thermoplastics Type: Vertical V 800/315 Design: Vertical Control system: Battenfeld UNILOG B4 Clamping force: 800 kN Injection unit: 315 Screw diameter: 40 mm Calculated displacement volume: 201 cm³ Dwodpfxezpwrgj Acyjd Maximum shot weight: approx. 183 g Specific injection pressure: 1,575 bar Clear tie bar distance: 370 x 420 mm Minimum mold height: 200 mm Maximum opening stroke: 300 mm Machine weight: 3 x approx. 5,500 kg Machine dimensions: approx. 2,917 x 1,423 x 3,643 mm Documentation and technical documents available Condition: used Disassembly and collection must be carried out by the buyer. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, functionality: fully functional, T36E bulb blowing machine with furnace Dedpfxjzgbd Ue Acyswd Olivotto Industries is the leader company in the production of blow machines. The T36E electronic blowing machine, faturing blowing machine featuring complete electronic process control is the natural evolution of the mechanical T series and it has been developed mainly for the productionof lighting bulbs in sodalime glass. In addition, the machine can be used for the production of small articles both in sodalime and borosilicate glass. The T36E is equipped with 36 blowing heads and can operate either with 36 or 18 working heads.

Condition: used, Year of construction: 2011, operating hours: 66,800 h, clamping force: 100 kN, displacement volume: 38 cm³, injection pressure: 2,000 bar, overall weight: 4,500 kg, screw conveyor diameter: 22 mm, terms of delivery: FCA Pegnitz Djdpfozx Hkkox Acyjwd delivery time: on request terms of payment: 100% prior to delivery