15
Filmatic BottleFilling Line
Filling Heads: 32
Capping Heads : 8
Cap size : 38mm
Speed output on 1 liter : 180 bottles per minute .
Air operated components :FESTO
Cahnge Parts : 500ml-1 Litres Square
BW Container systems trolley for change parts.
Infeed Conveyor : Available
Outfeed Conveyor : Available
Cap Blower for elevation of caps in to cap sorter
CIP wash Tank : Available for valves
8jegkcf9v
CIP Ring : Available
CIP wash down in cabin
Safety Stop and Emergency Stops on Doors when open.
High...
8
This line was installed but never operated.
Unused Universal model EV1000 filling line. Designed for 10ml & 30ml glass bottles up to 25 units per minute with pipette caps. Includes the following:
(1) Universal Posimatic EV bottle handling module as follows:
Stainless steel compact chassis:
(750mm wide guard) fabricated in 50mm box section 304 stainless steel the chassis provides a stable robust base for all other elements of the machine to be mounted from.
The chassis has self-levelling jac...
12
Filling Speed is 330 ml at 46,000 bph Non-Returnable
The Line also has the capacity to do 660 ml at 31,000 bph, (change parts required)
Available immediately from Indassol.
Equipment:
1. Bulk Glass Depalletiser: Krones Pressant Universal 1
2.Empty Bottle Inspector: Krones Linatronic M
3. Rinser: Krones Moduljet 2880-88-103
4. Filler: Krones Modulfill 3600-110-103
5. Clean Room: Krones With Hepa Filters
6. Foam Cleaning: Krones Internal RFC bloc piping and nozzles only
7. RFC Inspection: ...
3
Crane block, crane hook, load hook pulley, rope pulley, steel rope pulley, rope pulley, crane
Babibrltzr
-Payload: 1000 kg
-Dimensions: 4650/210/H90 mm
-Own weight: 9 kg
6
Bottles / pots labeling machine in new condition. Suitable for labeling round bottles and or jars. Works excellent and entirely on 220V. Leaves because it is over-complete. All stainless steel + - 25 kg. Depending on the operator and type of bottle / jar, the machine can easily label between 20-40 pieces per minute, making it an incredibly fast semi-automatic..
Machine is suitable for round bottles with a diameter between 15-150mm. Minimum label size 26mm wide and 25 length. Maximum label forma...
11
1 Krones glass bottle filling machine
Capacity is 12.000 Wine bottles per hour
Type filler: K 323-152, manufacturer year 2000
bloc building mechanical construction with
a Krones Variojet Type K 562-235
with a motor adjustable filler head
and with manual locking device for
VK- VKS- VC- VVHL und VVHK- Ffilling systems
7 different bolltes look to the photo
with manual with electronic controll system for glass
sherds and filler outside cleaning
with desinfection spraying device for the vaccum fille...
14
Full automatic cheese mould filler with 5 Columns.
Each Column has its own agitator.
With upgraded whey circulation/backflush system and high capacity sieves (High cap). Every column has a whey circulation pump and pressure sensors. Including CIP and Whey collecting tank, CIP return pumps, pall lane conveyor and lifting cylinders for the moulds during filling.
All valves and interconnecting piping.
Bzaxvvxhr8
Details:
- Capacity: 5.000 kg per hour.
- Format : Standard size, Euroblock 15kg (si...
2
Pastry filler for automatic filling
Bvuhljd7wy
Dosing amount via digital control panel
5.5 liter funnel with spout
Table-top unit
Connection 220V, 44 watts
Dimensions: 172 x 391 x 229 mm, DxHxW
Used equipment cleaned and checked
Visit our large bakery machines warehouse!
4
Air bellows, roller bellows, air cushions, spring-loaded brake
-Gas bottle holder
-for: 33.5/43.5 Lbs
Bfns3amr0h
-Hole spacing: 115/75 mm
-Weight: 3.2 kg
7
Riggs 1000 twin head depositor
Serial: TT1310
2011, twin head depositor, previously used for filling food grade oils 10l - 25l, with cycle counter
Bybpclpgip
8
A Krones glass bottle filling line
The filler is built as a pressure filler and can
Filling products with or without CO2 content
Output 12,000 wine bottles per hour
Year of construction 2000,
Mechanical bloc formation with a Krones
Rinser machine Variojet type K 562-235
with a motorized upper part of the filler that can be
adjusted higher and with manual locking for
VK- VKS- VC- VVHL and VVHK filling system
7 different 1 liter wine bottles were filled
Rinser
Medium 1: water, temperature 50 ...
3
Leonhard volumetric dosing unit
for pasty and lumpy materials
feed hopper approx. 180 ltr. with feeding screw
Adjustable displacement up to 1000 cm
Bgzp9vszza
stainless steel version, was used for food
Dimensions: L x W x H 2100 x 800 x 1450 mm
including documentation and spare parts package
8
Edhard pastry filling machine series P
Model: Edhard filler P 4020
Pastry filler for automatic filling
Dosing amount via digital control panel
5.5 liter funnel with spout
Table-top unit
With this filling and dosing system, masses are directly into 2 pieces of pastry
dosed via two 57mm long, 7mm thick filling tips.
The plastic funnel holds 5.5 liters.
The motor base triggers every time the switch is pressed.
Exactly the set amount up to max. 800g injected
Connection 220V, 44 watts
Dimensions: 1...
6
Output of 6,000 x 0.75 l
Ol9dj
5
Gas bottle cart, gas bottle cart, steel bottle cart
Bdeyw3rudq
-Transport trolley: galvanized version
-Tires: air
-Number: 1 piece car available
-Price: per piece
-External dimensions: 760/520/H1320 mm
-Own weight: 19 kg
2
Data:
- tiltable
- Type: AB-50-LDP
- Serial number: 200,499
- Year of construction: 1993
Bzeeyeck98
Price on request
15
A glass bottle of fruit juice hot filling plant with bottles of cooling tunnel
Power: 5,000 units ( 1.0 and 0.75l), built 1994 to 2014
Crate line, equipped with
K 1; Dirt box task on transport system,
happens manually
K2; Bottles lid unscrewing system from
Bkzy7ox
Fa. Elektro Maschinenbau Rink GmbH,
Type: KM 740/7K , Fabr. No 07/1813/93
Built in 1993
4 boxes with 6 bottles each, the
Lid autom. screwed down and disposed of in a container.
K3; Kettner bottle ...
10
Filler dosing machine Altuntas FDA
* Berliner filler, donut filler, pastry filler
* Completely covered in stainless steel
* Dosing volume adjustable
Eefwvel
* Robust construction with powerful motor
* Easy to clean
* Easy operation
* Display with keyboard
4
Wine filling triblock
24er nuzzles rinser
24 valves filler
Br08ibx3p8
4 head natural corker
5
Gas bottle cart, gas bottle cart, steel bottle cart
-Transport trolley
-Tires: PU tires puncture-proof 260x85mm
-Number: 1 piece car available
-Price: per piece
-External dimensions: 730/500/H1150 mm
-Own weight: 17.5 kg
H3nhpqumw
1
catwalk
Pos - No. 85
manufactured by Weinig
catwalk 1 piece
360 x 27 x 23 mm
Bn0ijznzcn
located in 97447 Gerolzhofen
sale in current condition. as seen. Without examination.
- free on truck -
6
Crane Hook/Pulley
- lifting capacity 10 t
- weight approx. 190 kg
Yrdfjk
- pulleys Ø 500mm; width 58mm; rope groove 40mm
- cargo hook length 420mm; hook opening 90mm; intake 110mm with safety device
Only one crane hook/pulley left on sale!
3
The machine is in an almost,
as good as new condition.
Speed, speed and pause length continuously selectable
Fill level display, piece counter, piece number switch-off
Ppxol
portion addition 1. portion
portioning range 5 - 10.000 g
Portioning speed up to 250 portions/min.
Filling cylinder with approx. 30 litre capacity solid stainless steel with sliding lining
piston made of high-quality, wear-resistant plastic
Connected load 3.3 kW
three-phase current 400 Volt, 50 Hz, 3 phases
(special voltages...
6
We offer a filler for jars. The filler has 97 operating hours. Equipped is the machine for a speed of 12.000 jars/hour refer to 0,045l and 0,075l BirdsNest with twist-off cap. The filler is also suitable for jam, tomato past, baby-food and viscous products to fill in cold condition.
Bzflmuazft
Further details are available on request
11 kW motor, 1 airknives, 1 noise cancwing hood
Bu0sgsmtlo
4
Gas bottle cart, gas bottle cart, steel bottle cart
-Transport trolley
Be8ifflbdv
-External dimensions: 1080/750/H1210 mm
-Net weight: 23.5 kg
6
Filler application machine Bürkle
type: CASC 1300
year of manufacture: 1996
working width 1300 mm
application by gummed roll from top
Byu72frxkf
steel roll
with protection grill
material infeed on transport carpet
with
Drying channel Balcke-Dürr
with Nemo heat exchanger
working width 1300 mm
throughfeed height approx. 80 mm
length of the drying channel approx. 4000 mm
drying by warm air
for the connection to a hot water supply
material transport on transport rolls
control for temperature, inf...
6
Filling line S3 consists of :
- Filling machine - KHS ROLA-TRONIC-H ; YOP 2007; 35000/h; Bottle 0,5l longneck, 0,33l smile, 0,66l
- Labeling machine - KRONES, TOPMODUL K 407-125 1800-36-600;
; YOP 2007; 45000/h; Bottle 0,5l longneck (front side,back side and ring labeling), 0,33l (front side, chest side,and back side labeling) smile, 0,66l (front side, chest side and back side labeling)
- Packing machine - KISTERS ; Combiline 420/70; YOP 1999; 40000 takt; Combined machine for feeding and ...
3
Used semi automatic DeVree filling machines with 5 litre cilinder.
7bnm0cxt
Stand-alone Auger Filler Desktop Version with PLC controlled with Touch ck and easy programing with check weighing by customers separate weigher. - Specification: hopper volume: 8 liter; filling weight: 2-100g; Stainless steel version with servo motor; packing accuracy: 0,3-1% (depending on product and total weight). Packaging speed 30 cycles/minute; power: 220V, 0.4kW; machine dimensions: L720xW555xH990mm; weight: 80kg.
Bfyluapw
Please note that our new prices are often below the usual used pr...
6
Can Filler
Producer: Holstein und Kappert ( KHS)
Model/Type: VVF 72D
Capacity: 46 000 cph (current status)
Year of manufacture: 1991
Electrical connection 380 V
Condition: Working
Seamer
Producer PSA Italy
Model/Type: 8V
Capacity: 60 000 cph
Year of manufacture: 2016
Electrical connection 380 V
Condition: Working
Tytnihev
Can End Supply
Producer: NSM Magnettechnik
Year of manufacture: 2013
Electrical connection 380 V
Condition: Working
3
Gas bottle cart, gas bottle cart, steel bottle cart
-Transport trolley
-Number: 1 piece car available
-Price: per piece
-External dimensions: 1000/750/H1200 mm
-Own weight: 36 kg
Njhad
11
PRESSE FAES HC 70 AA
Power : 70 tonnes
Bx87v72y2m
feedind size : 1060 x 1600 mm
balls size : 750 x 1100 x 2200
oil cooler
option bottle perforator
attached specification
subject to prior saler
5
double feeding screw
all stainless steel
Pmrgp
portions of 5 gr up to 60.000 gr
speed up to 700 portions/min. (depends on casing, caliber, product, etc…)
capacity up to 7.000 kg/h.
up to 50 bar
9,5 kW
250 L.-hopper
+ built-in loader for eurobins of 200 L
5
Molecular filler, manufacturer Lisec
Jrn2n8s2
Stand-alone Auger Filler with weight feedback via connected weigher. PLC controlled with Touch Screen. Preset programming possible. Hopper volume: 25 liter. Filling weight: 10-500g. Extension of filling range to 5-600g possible when second dosing screw is added. Built-in filling head height adjuster and weighing cells guarantee accuracy by means of permanent control and automatic correction of dosage. Stainless steel version with servo motor. - Including: Level Split hopper for easier cleaning, ...
6
Consisting of:
- Format recognition
- Container transport
- Krones Linatronic, year of construction 2004, with spare parts
- Filler KHS Innofill DMG, year of construction 2000, 168 filling valves, with format parts and spare parts, blocked with crown corker 24 capping stations, rated output: 62,000 bph
- Crown cork charging system
- valve manifold and vacuum pump
Pnin7
Controlling S7 400
Equipment format parts for:
- 0.5l Euro
- 0.5l NRW
- 0,33l Longneck
- 0,33l Euro
Machine is still in opera...
5
Generator, generator, emergency generator
-Power: 1.5 kVA 200 Hz
-for: vibrating bottle
-Sachs two-stroke engine: 4000 rpm 2.57 kW
-Dimensions: 570/385/H530 mm
-Weight: 51 kg
Cdvilmub
4
Washing sterilizing and filling machine for BEER kegs 20/25/30/50 liters capacity, COMPLETELY NEW, PACKED
3 Heads, ready to fill steel and Keykeg barrels
including:
- Frame made entirely of stainless steel - Hydraulic circuit
- Pneumatic circuit
- Electric Circuit
- Tank containing alkaline detergent solution - Tank containing acid cleaning solution
- The machine is equipped with the possibility of choosing one of the following cycles:
1) COMPLETE WASHING AND FILLING CYCLE
2) WASHING CYCLE ON...
6
ecomac offers a complete PET Filling line for flat water in 5 liter container. The line has a capacity of 2.000 bph.
The filling line is in a good used condition and at February 2022 available.
Ik3bkdbp
A visit at current location is arrangeable.
Further Details and pictures on request.
6
Molecular filler, manufacturer Lisec
Byv9jmacgm
1
Stand-alone Auger Filler with weight feedback via connected weigher. PLC controlled with Touch Screen. Hopper volume: 50 liter. Filling weight: 10-5000g. Stainless steel version with servo motor. - Including: Level Split hopper for easier cleaning, Filling head height adjuster, Free Flow Device for better control of product flow and including Dustproof Cover. - Specifications: packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-500g), 0-0.5% (at 500g and more) (depending on product and total weight...
24 grippers Rinser Procomac for PET and glas (1998)
25 valves Filler Bertolaso for PET and glass (18 mm, hot filling ecologic with HEPA filter) (1998)
Screw capper Bertolaso 28 mm for PET (Plastic) (1998)
with screw cap feeding
Capacity: 6000 bph
V8bzlb
different format parts
5
Gas bottle cart, gas bottle cart, steel bottle cart
-Transport trolley: galvanized version
Bdeywtaopp
-Tires: solid rubber
-Number: 1 piece car available
-Price: per piece
-External dimensions: 730/520/H1325 mm
-Own weight: 26 kg
