Used Parts Washing Systems for sale (49,656)

Condition: used, This listing is for Zeta Plus 16NZA Encapsulated Filter System The unit is in full working condition and ready for immediate use Chodpszqf Dgefx Ap Ded This high-performance, single-use depth filtration asset provides reliable fluid clarification and impurity removal for pharmaceutical and bioprocess laboratory operations. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, et ETSYSTEM Electronic Load GPIB Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, providing an ideal testing solution for UPS, AVR, and D/A inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series has its own control and display panel, and a 5-status recall/memory, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measuring device test function provides a quick diagnosis of test results for production and QC test throughput. Features Voltage, current, watt, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit meter display for voltage, current, watt, and VA. Suitable for sine, square, and step waves. Width 600 mm, height 1506 mm, depth 600 mm Codpfxszd Uh Is Ap Dehd 196kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision, industrial 3D measuring and testing system for in-process and quality control in manufacturing. The Equator 500 is not a conventional coordinate measuring machine, but a comparative measuring system specifically designed for fast, repeatable measurements directly in the production environment. Ideal for serial production, in-process measurements, and automated inspection processes. The device is ideally suited for dimensional, form, and positional tolerance testing of workpieces and can be used to provide feedback to CNC machines. The software starts correctly, system status according to the display: "Started OK" (see photos). Functions & Applications 3D measurement of workpieces Comparative measuring principle (very fast inspection cycles) High repeatability in the µm range Real-time temperature compensation Suitable for shop floor use Automation capable (e.g. robot loading) Ideal for serial, sample, and process control Typical industries: CNC manufacturing Metalworking Automotive / supplier industry Machine and tool building Technical data (manufacturer's data / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: Ø approx. 500 mm Z: approx. 150 mm Measuring principle: Comparative coordinate measuring technology Temperature-compensated measurement Accuracy: Very high repeatability Measuring accuracy in the µm range (application and strategy dependent) Control & Software Cjdjzix Nmspfx Ap Dohd Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical data Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power consumption: approx. 1 kW Dimensions (approx.) Overall height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.) 130 kg Condition: used Scope of delivery: (See image) Renishaw Equator™ 500 measuring system Controller / Industrial PC Monitor Keyboard and mouse Base frame Accessories as shown in the photos (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Tekol / Trumpf Laser welding system Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 extraction system Description: For sale is a professional Tekol LAP S4 laser welding system with an integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction system. The system is a closed, precision laser welding station for fine, pinpoint and low-distortion welding operations on metal parts. The pulsed laser enables very controlled heat input, clean weld spots and reproducible results. Ideal for precision engineering, toolmaking, repair welding, prototype construction and small series production. Closed protective cabin with safety system, control unit, rotary table and extraction/filter system. Technical data – system Tekol LAP S4 Operating voltage: 400 V ~ N / PE Current type: 3~ 400 V, 50 Hz Rated current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel ranges X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary table: 2-stage Technical data – laser TRUMPF TruPulse 44 Laser type: Nd:YAG pulsed laser Wavelength: 1064 nm Max. average power: 42 W Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical data – extraction system TBH GL 230 Voltage: 230 V / 50–60 Hz Power: 0.36 kW Air volume flow, free-blowing: approx. 390 m³/h Effective volume flow: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound pressure level: approx. 51 dB(A) Weight: approx. 40 kg Multi-stage filter system: Pre-filter Chodpjzizpcefx Ap Dsd Particle filter Activated carbon filter Weight approx. 900 kg Condition: used Scope of delivery: (See picture) Laser welding system Tekol LAP S4 TRUMPF TruPulse 44 laser unit Extraction system TBH GL 230 Documentation / folders / data storage media Keys and accessories as shown in the photos (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Brüel & Kjær LDS Dactron Shaker Control System / Vibration Testing Controller LDS Dactron LASER USB LAS 200 Controller for electrodynamic vibration testing systems Cedpfxezrtylj Ap Dohd For sale is a used Shaker Control System from the manufacturer Brüel & Kjær LDS Dactron. The system is suitable for controlling electrodynamic shaker systems for vibration, resonance, random, and shock tests in research, development, and quality assurance. Technical data: Manufacturer: Brüel & Kjær LDS Dactron Type: LASER USB Model: LAS 200 Device type: Shaker Control System / Vibration Testing Controller Country of manufacture: Made in U.S.A. Mains connection: 100–240 V AC Mains frequency: 47–63 Hz Power consumption: 1 A Analog inputs: 8 × BNC Outputs: 2 × (Drive / COLA) USB interface Digital I/O Master/Slave interfaces Emergency stop connection Calibration: Calibrated: 09/12/2023 Due: 09/11/2024 Dimensions: approx. 430 × 350 × 90 mm (W × D × H) Weight: approx. 6–8 kg Equipment: USB license dongle Power cable 8 measurement inputs USB interface Digital I/O Documentation as shown in the pictures Application areas: Vibration testing Oscillation testing Random tests Resonance tests Shock tests Endurance tests Test rig control Scope of delivery: 1 × LDS Dactron LASER USB LAS 200 Shaker Control System USB license dongle Power cable Documentation as shown in the pictures Condition: Used Optical condition as shown in the pictures Calibration sticker present Important note: The license keys visible in the documents have been obscured for data protection and security reasons. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping possible. Subject to changes, errors, and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, This listing is for UVP M-20V BioDoc-It Imaging System The unit is in full working condition and ready for immediate use This BioDoc-It Imaging System is a robust setup designed to provide accurate and consistent performance for gel imaging and documentation applications. Manufactured by UVP, this reliable unit is an excellent addition to any modern facility looking to expand its molecular visualization capabilities. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: Cedpjzqf H Uofx Ap Dehd By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, VETTER Krantechnik PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual traversing unit, and electric chain hoist For sale is a used VETTER PROFI crane system from Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical Data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI crane system as a two-rail portal with crane bridge Year of construction: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,100 mm Support distance L: 5,570 mm Support distance B: 5,100 mm Beam length: 5,470 mm Overall dimensions of system: approx. 6,020 x 5,800 mm Bottom edge of crane bridge: 4,145 mm Bottom edge of portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of construction: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Traversing unit / trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual traversing unit SiCO-HF Chjdpfjzgrzqsx Ap Dod Load hook Control / operating element Main switch Steel supports and beam structure Documentation / test book available Accessories as shown in the pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Based on experience, the total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition as shown in the pictures System was assembled and in operation Test book and documentation available Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual traversing unit SiCO-HF Support and beam structure Control / operating elements Documentation / test book Accessories as shown in the pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or forwarding is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Year of construction: 2021, condition: used, machine/vehicle number: 21.067.372, Submitting a bid obligates you to collect the item on time, no later than December 23, 2026! MACHINE DETAILS Total meter reading according to display: 1,376,504 (as of 2024) EQUIPMENT Chedpfx As Agvrrep Dod Computer terminal Note: Accessories are provided without warranty. The principle applies: "Item purchased as is." The prospective buyer must verify the completeness of the item on-site.

Condition: excellent (used), mileage: 574,043 km, power: 261 kW (354.86 HP), first registration: 04/2021, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 430 l, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,510 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, power mirror, seat heater, soot filter, spoiler, traction control, = Additional Options and Accessories = - Aluminum fuel tank - Android Auto - Rear work lights - Front work lights - Heated mirrors - Heated exterior mirrors - Leaf spring suspension - Brake booster - Combination lights - Roof spoiler - Remote central locking - High beam headlights - Windshield - Closed cab - Speed limiter - Interior lights - Cab - Tilting hydraulics Chsdpfx Ao Agnp Top Djd - Refrigerator/cooling drawer - Beacons - Air suspension - Air-suspended seats - Air horn - MX engine brake - Parabolic spring suspension - Particle filter - Radio/CD player - Radio/cassette player - Rotating beacon - Disc brakes - Sleeper cab - Hose sets - Seat heating - Sun visor - Voice control - Stability control - Automatic heating system - Tool box - Wind deflector - Central lubrication - Device transfer = Additional Information = General Information Number of doors: 2 Year of construction: 2021 License plate: 66-BRH-8 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: 12T2210, automatic Axle Configuration Maximum front axle load: 8000 kg Rear axle 1: Lift axle; Max. axle load: 7500 kg Rear axle 2: Max. axle load: 11500 kg Weights Unladen weight: 8,759 kg Payload: 18,241 kg GVWR: 27,000 kg Interior Number of seats: 2 Maintenance APK (Technical Inspection): valid until 04.2027

Condition: used, This listing is for Metrohm 852 Titrando Titration System The unit is in full working condition and ready for immediate use High-precision automated titration system designed for reliable chemical analysis. Ideal for research and quality control labs, offering accurate endpoint detection, user-friendly operation, and robust Metrohm engineering. Codpfxoy Ehdzs Ap Dshd Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: good (used), Complete weighing and vertical form, fill and seal twin bagging system, previously used to pack chocolate drops. This system comprises of the following equipment: 1 x Joy Conveyors product hopper. Manufacturer – Joy Conveyors Ltd. Overall dimensions – 550mm long x 610mm wide x 680mm deep. 1 x Joy Conveyors bucket elevator. Manufacturer – Joy Conveyors Ltd. Cjdpfx Ajy An I Iep Dohd 1 x Stainless-steel gantry and steps. Gantry overall dimensions – 3m long x 3m wide. 1 x High Dream AC-6B14 14-head multihead weigher with dimple pans and 10.4’’ touch-screen control panel. Manufacturer – High Dream Intelligent Machinery Co., Ltd. Weighing range – 25g – 500g. Accuracy - ±0.5g. Speed – up to 140 bags/minute (product dependent). 1 x Keymac servo-driven timing hopper. Manufacturer – Keymac Packaging Systems Ltd. 1 x Keymac vertical form, fill and seal twin bagging machine. Manufacturer – Keymac Packaging Systems Ltd. Model – BT2600 VFFS. Sealing jaws - Unit 1: Vertical - 300mm & Horizontal - 250mm. Unit 2: Vertical - 320mm & Horizontal - 250mm. Electrical requirements – 220-240 V / 60-60 hz / 1 phase. Previously running 210mm wide film. 2 x Forming tubes, each 60mm diameter. Has extension chute for larger packs. Overall dimensions - 1.9m wide x 1.6m deep x 2.1m high. 1 x Outfeed inclined conveyor. Infeed height - 200mm. Outfeed height - 1000mm. Belt dimensions - 3m long x 195mm wide. System footprint - 7.5m long x 3.4m wide x 4.4m high.

Condition: used, Mettler Toledo Type: DSC 3 STARe System Mettler Toledo DSC 3 STARe System FRS5+ Sensor Thermal Analysis + Accessories Service / Maintenance: Last maintenance by Mettler Toledo: 04/08/2025 Next maintenance due: 04/2027 Unit currently in service Professional thermal analysis system (high-end laboratory device) Differential Scanning Calorimetry (DSC) Ideally suited for: Research • Development • Quality assurance • Material testing The device comes from a professional laboratory environment and is in well-maintained, used condition. Your benefits at a glance: High-precision thermal analysis FRS5+ high-performance sensor Complete system incl. PC & software Incl. precision balance Extensive accessories package Incl. DSC 500 accessories kit Device functions: With the DSC 3, the following thermal properties can be investigated, among others: Melting point / glass transition Crystallinity & phase transitions Heat capacity (Cp) Reaction kinetics (curing, crosslinking, decomposition) Purity determination Oxidation induction time (OIT) Thanks to the FRS5+ sensor, the device offers very high sensitivity, stability, and reproducibility. Technical data: Model: DSC 3 STARe System Design: DSC3/500 Sensor: FRS5+ Oven power: 200 W Cooling: Air cooling / fan Lid: Automatic Power connection: 230 V AC / 50–60 Hz Fuse rating: 6 A Line output max.: 600 VA Software: STARe Software (V16.30) Operating system: Windows 10 Cedpfx Aey Drl Hjp Dshd Dimensions (approx.): 60 x 55 x 55 cm Weight (approx.): 55–65 kg Evaluation unit / PC: Dell Optiplex control PC with monitor Windows 10 installed STARe Software V16.30 Additionally included: Thermal analysis package DSC3/500 DSC 500 accessories kit Crucible sealing device Mettler Toledo precision balance (analytical balance) Measuring range: 42 g / 120 g Readability: 0.01 mg / 0.1 mg Scope of delivery: Mettler Toledo DSC 3 main unit Touchscreen control unit FRS5+ sensor Control PC (Dell Optiplex) with monitor DSC 500 accessories kit Crucible sealing device Precision balance Accessories according to pictures Extensive documentation & training materials Several folders (STARe System, E-DOC, EDU packages) USB sticks / data carriers Important: The images are the sole basis for the scope of delivery. Important note: The table shown in the photos is not included in the sale. Condition: used, like new Commercial sale Invoice with VAT possible (Subject to changes and errors in the technical data!) If you have any questions, please do not hesitate to contact us.

Condition: used, This listing is for the Millipore Elix Essential 10 UV Water Purification System The unit is in full working condition and is ready for immediate use Here’s a clear overview of the Milli‑Q Elix Essential 10 UV Water Purification System, a laboratory-grade water purification unit used to produce high-quality pure water Preparing reagents, buffers, and solutions Chjdpfx Apoy Iwzzj Dsd Feeding instruments like autoclaves, washers, and ultrapure water systems General chemical or biological lab work requiring reliable Type 2 water quality

Condition: used, This listing is for the Agilent PCB1500 Water Peltier System. The unit is in full working condition and ready for immediate use. Chsdjyz Aquepfx Ap Dsd Designed for precise thermal regulation, it provides stable and efficient temperature control for sensitive lab processes. Ideal for integration with analytical instruments requiring consistent cooling performance Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: defective spare-parts repository (used), Year of construction: 2002, Robot - Handling - Parts Donor Manufacturer: KUKA Type: KR 200/3 Year of manufacture: 2002 Technical data: - Load capacity: 200 kg Chedpfx Aszz S I Tjp Dsd The robot has not been tested and is being sold as a source of spare parts. Transport dimensions: approx. L 1.4 m x W 1.2 m x H 1.8 m / Weight: approx. 1,200 kg Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: defective spare-parts repository (used), Year of construction: 2001, travel distance X-axis: 390 mm, travel distance Z-axis: 435 mm, spindle speed (max.): 4,500 rpm, turning diameter: 220 mm, Vertical Turning Machine - Parts Donor Manufacturer: EMAG Model: VL5 Year of manufacture: 2001 Control system: Fanuc 18i The machine has not been tested and is being sold as a source of spare parts. Technical data: - Turning diameter: 220 mm Csdpfjzz S R Isx Ap Djhd - X-axis travel: 390 mm - Z-axis travel: 435 mm - Tool holder: VDI 40 - Number of tool stations: 12 positions - Spindle speed: 4,500 rpm Accessories, tools, and workholding devices shown in the images are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" Mount ISO 40 Overhang 300 mm Centering flange diameter 125 mm Rated drive power 10 HP Max. speed 1800 rpm Milling head dimensions L x W x H approx. 375 x 245 x 300 mm Weight approx. 80 kg Accessories / Special features: • Manual tool clamping • 2 axes that can rotate relative to each other, allowing any setting angle! System "HURON" • Tapered interfaces are manufactured according to the "KLINGELBERG" system • The main spindle's roller bearings consist of tapered high-precision rollers • 1 tool clamping screw The spindle and gear bearings have been completely renewed! Design: standard, for retrofitting to conventional, NC or CNC milling machines or drilling machines of any type Chjdpoz Adz Usfx Ap Djd Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, LDS Chedpfx Asy Uigcjp Dod LDS V790-335T Air-Cooled Vibrator with HPA-K CE power amplifier, m+p VibPilot-8, and PC system For sale is a used electrodynamic vibration testing system from Ling Dynamic Systems (LDS). The system is suitable for vibration testing, vibration analysis, environmental simulations, research & development, quality assurance, and industrial load testing. Technical data: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker model: V790-335T Type: Air-Cooled Vibrator Armature diameter: 335 mm Frequency range: DC to 3000 Hz Resonant frequency: approx. 2250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sinusoidal force: approx. 6.67 kN peak Random force: approx. 6.67 kN RMS Shock force: approx. 26.69 kN peak Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support approx. 5.52 bar (80 psi) Optional air isolation approx. 5.52 bar (80 psi) Power amplifier: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: HPA-K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting: 400 V Maximum connected load: 9.3 kVA Control / Measurement system: The scope of delivery includes a complete PC workstation with monitor, keyboard, and mouse, as well as m+p international VibPilot-8 measurement and control hardware. Installed software: m+p international VibControl VibRunner Version 2.13.27.7 VibMultiPlot Version 2.13.27.7 GraphPad The combination of LDS shaker, HPA-K power amplifier, m+p VibPilot-8 controller, and PC workstation forms a professional system for vibration and shock testing and applications in research, development, and quality assurance. Equipment: LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE power amplifier m+p VibPilot-8 measurement and control unit PC workstation Monitor Keyboard and mouse Connection cables and accessories as shown in the pictures Condition: Used. Normal signs of wear and storage are present. Optical condition see pictures. Scope of delivery: Scope of delivery as shown in the pictures. All components visible in the pictures and explicitly mentioned are included in the scope of delivery. Transport: Due to its size and weight, collection or shipping via a freight forwarder is recommended. An inspection by appointment is possible. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand Konica Minolta accessory, the “SDD Booklet Trimmer BLT0202” Suitable for various Konica Minolta models, such as the Konica Minolta SD-506 booklet finisher and the current range of machines Includes SquareFold Condition: This listing is for a second-hand unit, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! Csdpfx Apoy R Npps Dshd A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: new, Year of construction: 2017, Spiral conveyor for pellets and granules: For discharging and conveying pellets with a capacity of 600 kg/h and a bulk density of 0.7 t/m³, and filling 4 big bag stations with a safety end discharge. 1 Transitube discharge hopper, type: SC – 200 Capacity: 200 liters Overall height: 1,270 mm Without lid With sturdy grating as grip protection With built-in empty indicator, vibrating rod sensor All parts in contact with the product made of stainless steel 1.4301, glass bead blasted 1 Transitube screw conveyor, type 53 PCR Conveying length: 10 m (+/- €285 per meter) Motor with frequency converter, provided by the customer: 230/400 V, 50 Hz, 1.1 kW, 920 rpm Conveying screw with square profile 7x7 made of stainless steel Flexible outer hose made of food-grade polyamide Inlet flange type SC Ø 150 with blanking lid for emptying and 2 clamping rings R Insertion tube for coarse adjustment of the output Outlet flange type GW Ø 150 with grip protection and 2 clamping rings R Sensor connection type M1SW with built-in vibrating rod as maximum level indicator All sheet metal parts made of stainless steel 1.4301, glass bead blasted 1 transitube® screw conveyor, type: 53 PCR/VA PM Conveying length: 8 m Motor with frequency converter, provided by the customer: 230/400 V, 50 Hz, 1.1 kW, 920 rpm Flexible outer hose made of food-grade polyamide Codpfxezk I Tks Ap Dehd Square screw 7x7 made of stainless steel 4x intermediate outlets type GM DN 150 with clamping ring Pneumatic shut-off valve with safety end discharge Outlet flange type GW DN 150 with clamping ring Flexible hose 2 meters with mounting flange P1SW for connecting to a container All parts in contact with the product made of material: 1.431, glass bead blasted 4 BIG BAG filling frames Consisting of: 1x base frame, open on one side, internal dimensions 1,500 mm x 1,500 mm Including base plates for connecting the stations and prepared for anchoring in the floor 4x support columns 2100 mm (big bag height 1,850 mm) 1x top frame for hanging the bags With hanging hooks for big bags 1,300 x 1,300 and 700 x 1,100 mm Mounting plate, dimensions provided by the customer for push buttons and light column Support columns and frame parts made of stainless steel Filling connection set consisting of: Crossbars for supporting the conveyor with mounting flange P Ø 150 and P1SW Ø 150 for connecting to the conveyor with built-in vibrating rod as full level indicator Bag spout and bag clip for DN 300

Condition: used, Year of construction: 2023, SUNHUB – Compact Dispenser Year of manufacture: 10/2023 Condition: good condition, as is, operational Equipment: HEAD SunHub -20-NH-UV-20-N.00 Chsdpfozf H Rdex Ap Dod DOSING VALVES BP2 5-N-50 – INK PUMP 2.5 kg SCALE ICS06s-6M/f METTLER TOLEDO LABEL PRINTER + CODEBAR SCANNER External Pump 25 kg CONNECTION X-RITE

Condition: used, RMS RMS Electrodynamic Vibration Test System Vibration exciter SW 3006+ Power amplifier TGA 1500 Technical data: Chjdpozd Rvzjfx Ap Dsd Sine: 3.7 kN Random: 3.7 kN Shock: 3.7 kN Displacement pk-pk: 26 mm Velocity: 0.9 m/s Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2019, operating hours: 100 h, heating capacity: 12 kW (16.32 HP), total width: 700 mm, total length: 1,300 mm, total height: 600 mm, overall weight: 500 kg, Cleaning System Manufacturer: MFP - FTW Type: Conditioning tank - Size 2 Year of manufacture: 2019 Technical data: - Heating capacity: 12 kW - Temperature range: 30 - 90 °C - Dimensions (length/width/height): 1,300 x 700 x 600 mm - Max. load weight (mesh box): 800 kg - Operating hours: approx. 100 h - Overall dimensions: L x W x H 1.5 x 1.5 x 1.5 m - Weight: 500 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale. Cedozbvhfopfx Ap Dohd

Condition: used, Year of construction: 2008, Painting System Manufacturer: HEIMER Year of manufacture: 2008 Cjdszbvlwepfx Ap Dshd Technical data: - Max. weight per suspension point: 44 kg - Conveyor system (frequency-controlled): 0.6 – 2.0 m/min - Total chain length: approx. 40,500 mm - Pitch: 270 mm In our assessment, the painting system is in good used condition. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Liebisch Constamatic Type: S1000 M-TR Corrosion testing system / Salt spray test chamber Liebisch Constamatic S1000M-TR (4BVL) Professional corrosion testing system for salt spray, condensation, and cyclic climate tests For sale is a used corrosion testing system Codpfx Apszcdyxe Dehd from the manufacturer Liebisch Labortechnik. The system was developed for corrosion tests under defined environmental conditions and is suitable for quality control, research, development, and material and coating tests. Due to the robust chest design and large test chamber volume, larger components can also be tested. Technical data Manufacturer: Liebisch Labortechnik Type: Constamatic S1000M-TR (4BVL) Device type: Corrosion testing system / Salt spray test chamber Design: Chest design Test chamber volume: 1000 liters Test chamber dimensions (W x D x H): 1435 x 780 x 600 mm External dimensions (W x D x H): 2600 x 1120 x 1255 mm Temperature range, test chamber: Ambient temperature to 50 °C Temperature range, humidifier: Ambient temperature to 70 °C Reservoir for salt solution: 100 liters Power connection: 230 V AC Frequency: 50–60 Hz Current consumption: 12 A Power consumption: approx. 2700 W Suitable for tests according to DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621-415 ASTM B368 MIL STD 202 F-101D VW PV 1210 as well as other corrosion and cyclic climate tests Equipment Automatic control Salt spray test Condensation test Combined corrosion and cyclic climate tests Temperature control Humidification system Test rack with sample holders Pressure gauge Large reservoir for test solution Gas spring dampers for comfortable lid opening Areas of application Automotive industry Coating and paint testing Material testing Quality assurance Research and development Laboratory and testing technology Weight: 450 kg Condition Used Normal signs of wear and tear Interior with discoloration due to corrosion from previous testing operations Optical condition as shown in the pictures Scope of supply as shown in the pictures Scope of supply 1x Liebisch Constamatic S1000M-TR corrosion testing system Test rack and integrated holders Other accessories as shown in the pictures Inspection and testing on-site are possible by arrangement and are highly recommended. Loading can be organized by arrangement. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.