Used Mitsubishi for sale (380)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7HAA047, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 14,000 rpm, spindle speed (min.): 140 rpm, quill diameter: 65 mm, rapid traverse X-axis: 4,200 m/min, rapid traverse Y-axis: 4,200 m/min, rapid traverse Z-axis: 4,200 m/min, table width: 550 mm, table length: 1,000 mm, table load: 550 kg, overall weight: 6,500 kg, workpiece weight (max.): 550 kg, MITSUBIISHI M-V4050 Vertical Machining Centre, new 2005, ex aerospace enviroment. Fanuc 16iMB control, with hand controller, 30 position auto tool changer, BT 40 spindle, 14,000 rpm, renishaw probe, thru spindle high pressure coolant, chip conveyor. XYZ axis travels 800 x 510 x 460 mm, table size 1000 x 550 mm. Machine is in excellent condition. Vice and tooling not available. Dedpfx Acoyr Nh Hexjki

Condition: good (used), Year of construction: 2007, operating hours: 3,082 h, load capacity: 5,000 kg, lifting height: 5,020 mm, fuel type: gas, mast type: triplex, construction height: 2,500 mm, mileage: 3,082 km, This 5-ton LPG forklift by Mitsubishi is from 2007 and is in good condition. Starts, drives, and lifts without any issues. Capacity: 5,000 kg. Lifting height up to 5,020 mm. Equipped with FREELIFT, SIDESHIFT, and FORK SPREADER. Fitted with a new starter battery. Watch the video online! Dkjdpsxz Thzefx Acxoi

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: J20M0956, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller model: MITSUBISHI ADVANCE, No reserve price – guaranteed sale to the highest bidder! Once a bid is placed, the buyer is obligated to collect the item within the specified period from 04.05.26 to 07.05.26. Dsdpfx Acjyr Niqjxeki TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 300 mm Travel U and V axis: ±75 mm Taper angle at workpiece width: 15° Max. workpiece dimensions: 1,050 x 800 x 295 mm Max. workpiece weight: 1,500 kg Table dimensions: 780 x 630 mm Admissible wire diameter: 0.07 - 0.3 mm Feed rate on X and Y axis: 1,300 mm/min MACHINE DETAILS Control: MITSUBISHI ADVANCE Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,000 x 2,500 mm Weight: 4,000 kg EQUIPMENT Cooling system Transformer Documentation External reference: 58

Condition: good (used), mileage: 220,884 km, power: 92 kW (125.09 HP), first registration: 08/2006, fuel type: diesel, fuel: diesel, fuel tank capacity: 150 l, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro3, total length: 6,250 mm, total width: 2,100 mm, total height: 2,240 mm, loading space length: 4,520 mm, loading space width: 2,060 mm, loading space height: 400 mm, Year of construction: 2006, Number of cylinders: 4 Engine displacement: 2,977 cc Unladen weight: 2,445 kg Payload: 1,055 kg Gross vehicle weight: 3,500 kg Technical condition: good Dksdpfx Aceyrgtyexei Contact Vitali Lenda for further information.

Condition: used, Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Djdpfx Acex Hgg Doxeki

Condition: used, MITSUBISHI MR-S11-300-E31 Axle booster Dkedjypwg Ejpfx Acxoi

Condition: used, mileage: 224,797 km, power: 110 kW (149.56 HP), first registration: 12/2017, fuel type: hybrid, tire size: 205/75R17,5, axle configuration: 4x2, wheelbase: 3,900 mm, color: white, gearing type: automatic, emission class: euro5, suspension: steel, loading space length: 5,030 mm, loading space width: 2,060 mm, loading space height: 1,750 mm, Year of construction: 2017, Equipment: air conditioning, electric window regulation, Type of fuel: Hybrid (electric and diesel) Tyre size: 205/75R17,5 Suspension: leaf suspension Rear axle: Double wheels Drive: Wheel Empty weight: 4.440 kg Dkjdexrb Scepfx Acxoi Carrying capacity: 3.050 kg GVW: 7.490 kg Make of bodywork: LAMBERET XARIOS 600

Condition: used, power capacity / kW volt / V ampere / A revolutions per minute / U/min Dkodpfx Asyn Sbzecxoi For sale is a functional MITSUBISHI HA300C spindle motor AC spindle motor

Condition: used, power capacity / kW volt / V ampere / A MITSUBISHI ELECTRIC CORPORATION AC SERVO MOTOR HA200C SERIAL: 0Y475 Dkjdpeyn Sbuefx Acxsi

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: MITSUBISHI, controller model: CR750-04VD1-1-S15, number of axes: 6, This 6s Mitsubishi Electric RV-4FLM robot arm was manufactured in 2018. It features a reach of approximately 649 mm and a payload capacity of up to 4 kg, making it suitable for various industrial automation applications. Consider the opportunity to buy this Mitsubishi Electric RV-4FLM robot arm. Contact us for further details. • Quantity: 2 similar robots available • Reach: approx. 649 mm • Payload: up to 4 kg (nominal 3 kg) • Repeatability: ±0.02 mm • Protection class: IP67 • Controller: CR750 Dkjdpfx Acjyhddnoxei • Teach pendant: R32TB (handheld device) • Connection: Robot-to-controller cable included • Suitable for applications in industrial automation

Condition: ready for operation (used), Year of construction: 2018, overall weight: 2,722 kg, controller manufacturer: MITSUBISHI, controller model: M800, number of axes: 5, This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Additional Equipment • Auto Wire Threading • Chiller • Remote 360 Installed • Round Diamond Guides Included • 1GB Partition • Wire Chopper • Angle Master Advanced Tapering • Angle Master Precision Taper Software Dkedpfx Acsx D Ryyoxoi • CFAST Compact Flash Card • Chiller Chopper • DNC Hardware Ethernet FTP • FS Power Supply • High Precision Alignment Gauge • Wire Alignment Gauge Included Machine Benefits Technical machine benefits: • X-Axis Travel: 15.7" • Y-Axis Travel: 11.8" • Z-Axis Travel: 8.7" • U/V Axis Travel: 2.4" x 2.4" • Degree Taper Cutting: 15 @ 8" • Glass Scale Feedback: X, Y, U, V • Workpiece • Precision: .000002" • Table • Inside Tank Dimensions: 31.9" x 27.6"

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, number of axes: 5, This 5-axis Mitsubishi MV2400 S wire EDM machine was manufactured in 2016. It features a 600 mm X-axis travel, 400 mm Y-axis travel, and 310 mm Z-axis travel. Capable of handling workpieces up to 1500 kg, it offers dimensions up to 1050 mm in length and 820 mm in width. Consider the opportunity to buy this Mitsubishi MV2400 S wire EDM machine. Contact us for more information. Dkedpex Urafjfx Acxoi • Maximum workpiece length: 1050 mm • Maximum workpiece width: 820 mm • Maximum workpiece height: 305 mm • Maximum workpiece weight: 1500 kg

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, total height: 2,380 mm, overall weight: 3,725 kg, product length (max.): 2,145 mm, This 4-axis Mitsubishi EA 12S die-sinking EDM machine was manufactured in 2016 in Japan. It features X/Y/Z travels of 400/300/300 mm, a maximum workpiece weight of 700 kg, and a stainless steel table measuring 700 × 500 mm. Equipped with a C-axis and Erowa chuck, it also includes a dielectric filtration system with a 400 L tank. Consider the opportunity to buy this Mitsubishi EA 12S die-sinking EDM machine. Contact us for more information about this machine. Dedpex Uq Syjfx Acxoki • Maximum Workpiece Dimensions: 850 x 640 x 250 mm • Maximum Workpiece Weight: 700 kg • Maximum Electrode Weight: 50 kg • Table Dimensions (LxW): 700 x 500 mm • Table Surface: Stainless steel • C-axis with Erowa Chuck: 152.5 – 452.5 mm • Maximum Dielectric Filling Level Stroke: 300 ml • Filtration System: Yes • Tank Capacity: 400 L • Filter Particle Fineness: 3 / 2 µm • Dielectric Temperature Control: Yes • Pulse Generator Power Supply with Transistor Control • Cooling Method: Fully Sealed, Indirect Air Cooling Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 2015, operating hours: 64,348 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, controller manufacturer: MITSUBISHI, number of axes: 3, This 3-axis Mitsubishi MV 2400S wire EDM machine was manufactured in 2015. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm. The machine can accommodate workpieces up to 1,050 mm in length and 820 mm in width, with a maximum weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV 2400S machine we have for sale. Contact us for further details. • Maximum workpiece length: 1,050 mm • Maximum workpiece width: 820 mm • Maximum workpiece height: 305 mm • Maximum workpiece weight: 1,500 kg • Tank length: 1,050 mm • Tank width: 820 mm • Tank height: 305 mm • Automatic wire threading: Yes Dkjdoylm Scjpfx Acxei Additional equipment • Wire feeder with enlarged 25 kg spool

Condition: ready for operation (used), Year of construction: 2013, load capacity: 13 kg, controller manufacturer: MITSUBISHI, number of axes: 6, This 6-axis Mitsubishi RV-13FLM D1 S15 robot arm was manufactured in 2013, featuring a comprehensive operating range with base rotation of ±240° and wrist roll of ±360°. It's equipped with powerful motors, including 1500 W for both the base and shoulder. If you are looking to get high quality robotic arm capabilities consider the Mitsubishi RV-13FLM D1 S15 machine we have for sale. Contact us for more information. Axis Operating Range: • J1 (Base Rotation): ±240° (Total 480°) • J2 (Shoulder): -150° to +90° (Total 240°) • J3 (Elbow): -72.5° to +95° (Total 167.5°) Dedpfxex D H Nkj Acxski • J4 (Wrist Yaw): ±200° (Total 400°) • J5 (Wrist Pitch): ±120° (Total 240°) • J6 (Wrist Roll): ±360° (Total 720°)Axis Power: • J1 (Base): 1500 W • J2 (Shoulder): 1500 W • J3 (Elbow): 750 W • J4 (Wrist Yaw): 400 W • J5 (Wrist Pitch): 200 W • J6 (Wrist Roll): 100 W

Condition: ready for operation (used), Year of construction: 2022, This 6-axis Mitsubishi RV-7FRLM-D robot arm was manufactured in 2011. It features a vertical multiple-joint structure, capable of handling a maximum load of 7 kg with a reach radius of 908 mm. The robot is equipped with an AC servo motor and can be installed on floors, ceilings, or walls. It operates efficiently with a cycle time of 0.35 seconds and has an IP67 protection degree. Consider the opportunity to buy this Mitsubishi RV-7FRLM-D robot arm. Contact us for more information. • Structure: Vertical multiple-joint type • Environmental Specifications: Oil mist • Protection Degree: IP67 • Installation: Floor / Ceiling / Wall-mounted • Degrees of Freedom: 6 • Drive System: AC servo motor (all axes with brake) • Position Detection: Absolute encoder • Load Capacity Maximum: 7 kg/ Rated: 7 kg • Upper Arm: 435 mm • Forearm: 470 mm • Maximum Reach Radius: 908 mm • J1: −240° to +240° Djdpfx Aox Enknjcxoki • J2: −110° to +130° • J3: 0° to +162° • J4: −200° to +200° • J5: −120° to +120° • J6: −360° to +360° • J1: 288 deg/sec • J2: 321 deg/sec • J3: 360 deg/sec • J4: 337 deg/sec • J5: 450 deg/sec • J6: 720 deg/sec • Maximum Composite Speed: 11000 mm/sec • Cycle Time: 0.35 sec • Position Repeatability: ±0.02 mm • Environmental Conditions Ambient Temperature: 0–40°C /Robot Mass: 67 kg • Allowable Torque • J4: 16.2 Nm • J5: 16.2 Nm • J6: 6.86 NmAllowable Inertia • J4: 0.45 kg·m² • J5: 0.45 kg·m² • J6: 0.10 kg·m² • Tool Interfaces Tool Wiring: • 8 inputs / 8 outputs for gripper • Multi-function gripper & sensor signal cable • LAN × 1 (100BASE-TX)Tool Pneumatic Pipes: • Primary: Ø6 × 2 • Secondary: Ø4 × 8Controller Connected Controller Type: CR800-07VD /Control Type: Standalone

Condition: used, Year of construction: 2007, operating hours: 14,301 h, Type of fuel: Diesel Empty weight: 3.760 kg Dimensions (LxBxH): 255 x 123 x 257 cm Lifting capacity: 2.500 kg Lift height: 410 cm Fork dimensions: 1.200 x 1.050 mm - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: EF18C52604 - Operating hours: 14301 - Lifting capacity: 2500kg - Lifting height: 4100mm - Overhead clearance: 2570mm - Free lift: 0mm - Fork length: 1200mm - Maximum fork width: 1050mm - Minimum fork width: 360mm - Number of wheels: 4 Wheels - Attachment: Fork positioner, Side-shift - Options: Full cabin, Radio, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Mitsubishi - Transport dimensions: 2550mm x 1230mm x 2570mm (l x w x h) - Transport weight [kg]: 3760kg - Transport packages [pcs.]: 1 Financial information Dsdpeyluh Eofx Acxoki VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: ready for operation (used), Year of construction: 2011, General Data Djdox D Ihnspfx Acxski Measurements height 1400 mm Measurements depth 40 mm Dimensions Machine Length 1600 mm Main Drive Number of axis 6 This 6-axis Mitsubishi RV-12SL robot arm was manufactured in 2011. It features a 10 kg payload capacity, Ethernet interface, and a pneumatic hand interface for up to 4 valves. The robust stainless steel frame and aluminum mounting plate ensure durability. Ideal for precise measuring and assembly tasks. Contact us for more information about this machine. Application Types Robotics

Condition: good (used), functionality: fully functional, MHI Singlefacer Model 50C Size: 2500 mm Dkodpfx Acsypamzsxei Max. Working Pressure: 200 psi Year: 1984 C-Flute = overhauled In production

Condition: used, power capacity // kW volt / V ampere / A total power requirement / kW weight of the machine ca. / t required space / m MITSUBISHI ELECTRIC CORP. AC SERVO MOTOR HA300C SERIAL: 0Z137 + Dkodpfx Aoymgapocxoi TAMAGAWA FA-CODER TYPE: OSE 5KN-6-12-108

Condition: used, mileage: 14 km, power: 85 kW (115.57 HP), first registration: 07/2024, fuel type: electric, overall weight: 6,000 kg, next inspection (TÜV): 03/2028, color: grey, gearing type: automatic, number of seats: 3, loading space length: 3,670 mm, loading space width: 1,940 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle no.: 153188 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (Zip code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Heated exterior mirrors Interior * Driver’s comfort air-suspension seat, heated * Automatic climate control Safety * Driver’s airbag Comfort and Environment * Reverse warning system * Lane-keeping assistant Additional Features * 2 DIN 7" touchscreen radio, incl. Apple CarPlay, Android CarPlay, and hands-free function * 3-year manufacturer’s warranty from initial registration up to 100,000 km * Active Sideguard Assist (turn-assist system) * Heated leather steering wheel * Three-way tipper body, 3670 x 1940 x 400 mm * Spare wheel mount, double-secured * Reinforced vehicle battery, 2x 80Ah (2 batteries) * Vehicle is day-registered to Daimler Truck AG * Manual throttle lever for engine speed * Rear underrun protection * Hire purchase / financing or leasing possible through Daimler Truck Financial Service Deutschland (DTFSD). We are happy to provide you with a quote. * Payload: 2,490 kg * Performance Package: Optimized cab climate control * Fleet Management System (FMS) interface * Fuso safety package incl. floor mats * Digital tachograph 4.1 * Valve extensions * Windscreen, laminated green glass, heated * Rear axle stabilizer Other Details: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all transporters: Optional 12 or 24 months Mercedes-Benz used vehicle warranty available on request. * We are happy to take back your current vehicle, offset it against the new vehicle, or pay you the purchase amount. * Leasing / financing through Mercedes-Benz Bank. We are happy to provide you with a quote. * No liability for printing or typing errors * Subject to errors and prior sale ----. Dkodsyrwwpepfx Acxei

Condition: used, mileage: 14 km, power: 85 kW (115.57 HP), first registration: 07/2024, fuel type: electric, overall weight: 6,000 kg, next inspection (TÜV): 03/2028, color: grey, gearing type: automatic, number of seats: 3, loading space length: 3,670 mm, loading space width: 1,940 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle number: 153188 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (postal code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Heated exterior mirrors Interior * Driver comfort suspension seat, sprung and heated * Automatic climate control Safety * Driver airbag Comfort and Environment * Reverse warning system * Lane keeping assist Other features * 2 DIN 7" touchscreen radio, including Apple CarPlay and Android CarPlay, plus hands-free system * 3-year manufacturer’s warranty from initial registration, up to 100,000 KM * Active Sideguard Assist (turn assist) * Heated leather steering wheel * Three-way tipper body, 3670 x 1940 x 400 mm * Spare wheel holder, double secured * Reinforced vehicle battery, 2x80Ah (2 batteries) * Vehicle has day registration to Daimler Truck AG * Manual engine speed control * Rear underride guard * Hire purchase/financing or leasing possible via Daimler Truck Financial Services Germany (DTFSD). We will be happy to provide you with an offer. * Payload: 2490 KG * Performance Package: Optimized cab temperature * Interface for Fleet Management System (FMS) * Fuso safety package incl. floor mats * Digital tachograph 4.1 * Valve extensions * Windscreen, laminated green glass, heated * Rear axle stabilizer Djdpsyrwwvjfx Acxjki Additional information: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all vans: Optional Mercedes-Benz Used Vehicle Warranty for 12 or 24 months available upon request. * We are happy to take back your current vehicle, offset it against your new vehicle, or pay you the purchase amount. * Leasing/financing available through Mercedes-Benz Bank. We will be pleased to make you an offer. * No liability for printing or typographical errors * Errors and prior sale reserved ----.

Condition: used, mileage: 14 km, power: 85 kW (115.57 HP), first registration: 07/2024, fuel type: electric, overall weight: 6,000 kg, next inspection (TÜV): 03/2028, color: grey, gearing type: automatic, number of seats: 3, loading space length: 3,670 mm, loading space width: 1,940 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle number: 153188 Location: OsnaTruck Commercial Vehicle Service GmbH in Osnabrück (ZIP 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Heated exterior mirrors Interior * Driver’s comfort suspension seat, sprung and heated * Automatic climate control Safety * Driver airbag Comfort and Environment * Reversing warning system * Lane departure assistant Other features * 2 DIN 7" touchscreen radio incl. Apple CarPlay and Android CarPlay, with hands-free system * 3-year manufacturer's warranty from initial registration, up to 100,000 km * Active Sideguard Assist (turn assist) * Heated leather steering wheel * Three-way tipper body, 3670 x 1940 x 400 mm * Spare wheel holder, double-secured * Reinforced vehicle battery, 2x80Ah (2 batteries) * Vehicle has same-day registration to Daimler Truck AG * Hand throttle for engine speed control * Rear underrun protection * Lease-purchase/financing or leasing available via Daimler Truck Financial Service Deutschland (DTFSD). We are happy to provide an offer. * Payload 2,490 kg * Performance package: optimized cabin temperature management * Interface for Fleet Management System (FMS) * Fuso safety package incl. floor mats * Digital tachograph 4.1 * Valve extensions * Windscreen: green-tinted laminated glass, heated * Rear axle stabilizer Dksdpjyrwwijfx Acxji Miscellaneous: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * On request: 12 or 24-month Mercedes-Benz used vehicle warranty for all transporters available. * We are happy to accept your current vehicle in trade, offset it against your new vehicle, or pay you the purchase amount. * Leasing/financing via Mercedes-Benz Bank. We are happy to provide an offer. * No liability for printing or typographical errors * Subject to error and prior sale ----.

Condition: used, mileage: 125,000 km, power: 132 kW (179.47 HP), fuel type: diesel, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,210 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, spoiler, tail-lift, Year of manufacture: 2020 Empty weight: 4.358 kg Carrying capacity: 3.132 kg Dsdpoyni Ixofx Acxeki GVW: 7.490 kg Tail lift: tail lift, 1000 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 02DC2563, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Mitsubishi MV 2400S Year of manufacture: 2022 Travel (X/Y/Z): 600 x 400 x 310 mm Travel (U / V): 150 / 150 (+/-75) mm Taper angle (workpiece height): 15 / 260 or 30 / 110 °/mm Maximum workpiece weight: 1,500 kg Dkjdpjyqwmhofx Acxji Maximum workpiece dimensions: 1,050 x 820 x 305 mm Table dimensions: 840 x 560 mm Hardened 3-sided table Usable wire diameters: 0.10 - 0.30 mm Wire spool capacity: 10 kg Machine dimensions: 2,687 x 3,030 x 2,150 mm Machine weight: 3,500 kg The machine is currently still in operation and will be available from April 2026. We are happy to offer on-site commissioning of the machine upon request.