Used Mitsubishi D 1550 Fd for sale (404)

Condition: ready for operation (used), Year of construction: 2022, This 6-axis Mitsubishi RV-7FRLM-D robot arm was manufactured in 2011. It features a vertical multiple-joint structure, capable of handling a maximum load of 7 kg with a reach radius of 908 mm. The robot is equipped with an AC servo motor and can be installed on floors, ceilings, or walls. It operates efficiently with a cycle time of 0.35 seconds and has an IP67 protection degree. Consider the opportunity to buy this Mitsubishi RV-7FRLM-D robot arm. Contact us for more information. • Structure: Vertical multiple-joint type • Environmental Specifications: Oil mist • Protection Degree: IP67 • Installation: Floor / Ceiling / Wall-mounted • Degrees of Freedom: 6 • Drive System: AC servo motor (all axes with brake) Gtedox Enknspfx Admot • Position Detection: Absolute encoder • Load Capacity Maximum: 7 kg/ Rated: 7 kg • Upper Arm: 435 mm • Forearm: 470 mm • Maximum Reach Radius: 908 mm • J1: −240° to +240° • J2: −110° to +130° • J3: 0° to +162° • J4: −200° to +200° • J5: −120° to +120° • J6: −360° to +360° • J1: 288 deg/sec • J2: 321 deg/sec • J3: 360 deg/sec • J4: 337 deg/sec • J5: 450 deg/sec • J6: 720 deg/sec • Maximum Composite Speed: 11000 mm/sec • Cycle Time: 0.35 sec • Position Repeatability: ±0.02 mm • Environmental Conditions Ambient Temperature: 0–40°C /Robot Mass: 67 kg • Allowable Torque • J4: 16.2 Nm • J5: 16.2 Nm • J6: 6.86 NmAllowable Inertia • J4: 0.45 kg·m² • J5: 0.45 kg·m² • J6: 0.10 kg·m² • Tool Interfaces Tool Wiring: • 8 inputs / 8 outputs for gripper • Multi-function gripper & sensor signal cable • LAN × 1 (100BASE-TX)Tool Pneumatic Pipes: • Primary: Ø6 × 2 • Secondary: Ø4 × 8Controller Connected Controller Type: CR800-07VD /Control Type: Standalone

Condition: used, Year of construction: 1994, operating hours: 2,669 h, Type of fuel: Diesel Empty weight: 3.700 kg Dimensions (LxBxH): 255 x 115 x 255 cm Lifting capacity: 2.500 kg Lift height: 400 cm Fork dimensions: 1.090 x 990 mm - Year: 1994 - Documentation available: Yes - CE certificate present: No - Serial number: EF18B61132 - Operating hours: 2669 - Lifting capacity: 2500kg - Lifting height: 4000mm - Overhead clearance: 2540mm - Free lift: 0mm - Fork length: 1090mm Gedpfxsx Nqrpj Admstt - Maximum fork width: 990mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Mitsubishi - Transport dimensions: 2550mm x 1150mm x 2550mm (l x w x h) - Transport weight [kg]: 3700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: ready for operation (used), Mitsubishi Electric MELFA RV-13FM-D1-S15 industrial robot SN: FK612018R, used, in good condition, fully functional, supplied as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! The following components are also available in our shop: Controller "Mitsubishi Electric MECHA CR750-07VLD1-1-S15" / Connection cable "Mitsubishi Electric BKO-FA0741H07-D" / Connection cable "Mitsubishi Electric BKO-FA0739H07-D" Gtodpfx Aox Dw Nuedmot

Condition: ready for operation (used), Year of construction: 1999, Fuel: diesel, max. speed: 20km/h, max. load: 4000kg, machine dimensions X/Y/Z: approx. 3150mm/1500mm/2300mm, weight: approx. 6200kg, operating hours: approx. 13533h. The handbrake of the must be adjusted. Documentation available. An on-site inspection is possible. Gsdpjvft Nqofx Admott

Condition: used, operating hours: 7,219 h, Type of fuel: Diesel Empty weight: 2.780 kg Dimensions (LxBxH): 220 x 110 x 254 cm Lifting capacity: 1.500 kg Lift height: 400 cm Fork dimensions: 1.200 x 900 mm Gtsdpex E N Nlefx Admot - Documentation available: Yes - CE certificate present: No - Serial number: F16-51206 - Operating hours: 7219 - Lifting capacity: 1500kg - Lifting height: 4000mm - Overhead clearance: 2540mm - Free lift: 0mm - Fork length: 1200mm - Maximum fork width: 900mm - Minimum fork width: 0mm - Number of wheels: 4 Wheels - Options: Work lights - Mast: Duplex - Drive: Diesel - Transport dimensions: 2200mm x 1100mm x 2540mm (l x w x h) - Transport weight [kg]: 2780kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2003, operating hours: 11,051 h, Type of fuel: Diesel Empty weight: 4.300 kg Dimensions (LxBxH): 270 x 120 x 210 cm Lifting capacity: 2.500 kg Lift height: 433 cm Clearance lift height: 148 cm Fork dimensions: 1.200 x 950 mm - Year: 2003 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: F18B-22991 - Operating hours: 11051 Gjdpfx Adswiwl Njmott - Lifting capacity: 2500kg - Lifting height: 4330mm - Overhead clearance: 2100mm - Free lift: 1480mm - Fork length: 1200mm - Maximum fork width: 950mm - Minimum fork width: 0mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Free-lift, Work lights - Drive: Diesel - Transport dimensions: 2700mm x 1200mm x 2100mm (l x w x h) - Transport weight [kg]: 4300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 6,012 h, load capacity: 3,500 kg, lifting height: 3,700 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, motor manufacturer: Mitsubishi S4S, gearing type: automatic, fork length: 1,300 mm, tire condition: 90 %, overall weight: 5,110 kg, empty load weight: 3,500 kg, total height: 2,500 mm, total length: 2,800 mm, total width: 1,300 mm, maximum load weight: 3,500 kg, fuel: diesel, Equipment: lighting, pallet forks, sideshift, New price: €14,900 // Previous price: €18,900 Gtjdpfx Aex S Rctsdmet Mitsubishi - IN VERY GOOD CONDITION We sell forklifts after complete servicing. Prepared for immediate use by the end user. We can arrange transport throughout Europe and worldwide. ===== WhatsApp in English between 09:00 and 21:00. WhatsApp auf Deutsch zwischen 9:00 und 21:00 Uhr. WhatsApp en français entre 9h00 et 21h00. WhatsApp на французском языке с 9:00 до 21:00. ===== We are a company specializing in 4-way forklifts, side loaders and counterbalance forklifts. Our team consists of qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We employ the best mechanics in the forklift industry in Poland, and have many satisfied customers across Europe. We are also a manufacturer of EPAL EUR pallets, recognized for our excellent quality and on-time deliveries. Before delivery, we thoroughly test each truck and carry out a complete service inspection. All necessary repairs are performed, so the customer receives a forklift ready for immediate operation. In Poland, at the customer's request, we can facilitate acceptance of the equipment by the State Office of Technical Inspection (UDT). Our company’s main mission is customer satisfaction and solving logistical challenges. We know how to properly prepare the machines so that our clients are fully satisfied and eager to recommend us further. Contact us for further information and to take advantage of our services. Looking for a reliable forklift supplier? Contact us.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: F26-00153, Year of construction: 1997, operating hours: 775 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fuel type: diesel, mast type: simplex, gearing type: automatic, tire condition: 85 %, overall weight: 8,430 kg, empty load weight: 4,930 kg, color: green, Equipment: cabin, head guard, lighting, I sell a forklift, - Mitsubihi FD35A Diesel year of manufacture 1996. - The state of the counter 775 hours. - Lifting capacity 3.5T. Godsudlaajpfx Admett - Mast lifts 360cm - Unladen weight 4930kg. - Full lighting. - Forklift in very good condition.

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 16,771 h, load capacity: 9,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,800 mm, fork length: 1,500 mm, empty load weight: 14,620 kg, Equipment: cabin, MACHINE TYPE: forklift BRAND: Mitsubishi MODEL: FD90N YEAR: 2008 HOURS: 16771 ENGINE: diesel, Mitsubishi GEARBOX: automatic MAST: 2 stages ATTACHMENT: side shift, fork positioner CAPACITY: 9000 kg LIFTING HEIGHT: 4500 mm CLOSED MAST: 3800 mm FORKS: 1500 mm TYRES: good CONDITION: good operating Gtodpfsxphxwjx Admjt ID108027

Year of construction: 2006, condition: ready for operation (used), fuel type: diesel, Vehicle description Diesel forklift MITSUBISHI FD35N year 2006 lt. Counter 13.347 hours 3,5 tons lifting capacity 2,45 meters headroom 3,70 meters lifting height 42,3 KW Mitsubishi engine - clear view mast - wide fork carriage - twin tires - sideshift - light system - original paint Godpfx Adei Dnqkjmott - ready for immediate use Selling price: 10.500,-- net also favorable delivery possible !!!

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 4,280 h, load capacity: 2,500 kg, lifting height: 3,300 mm, free lift: 100 mm, fuel type: diesel, mast type: simplex, construction height: 2,145 mm, power: 35 kW (47.59 HP), fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 3,760 kg, total length: 2,560 mm, drive type: Diesel, construction width: 1,150 mm, Diesel Forklift Load Center: 500 mm Fork Width: 100 mm Fork Thickness: 40 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Standard Transmission: Torque Converter / Automatic Condition: Operational and fully functional Technical Condition: Very good Front Tire Type: Superelastic Front Tire Size: 7.00-12 Front Tire Condition: 80 - 100% Rear Tire Type: Superelastic Rear Tire Size: 6.00-9 Rear Tire Condition: 80 - 100% Description: Maintenance and UVV safety inspection renewed, drive & hydraulic oil replaced, fully refurbished, both visually and technically. Sideshift, fork positioner, Additional attachments such as fork positioner optionally available. 3rd valve, 4th valve, rear working lights, front working lights, roof cover, front windshield, half cab, CE certificate, beacon, windshield wiper. Gedpexvt H Hefx Admett Machine includes front, roof & rear windows. Upgrade to a full cab available at extra cost.

Condition: used, mileage: 1,001 km, gearing type: other, fuel type: diesel, empty load weight: 3,490 kg, driver cabin: other, Vehicle location: Bovenden, Body: 2.0tn forklift type FD20 lifting height 3300mm, load capacity 2000kg ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gtedsi Rndaspfx Admst - .

Condition: used, functionality: fully functional, machine/vehicle number: SF18E-51018, Year of construction: 2022, operating hours: 3 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,085 mm, mast type: triplex, construction height: 2,145 mm, power: 36 kW (48.95 HP), fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 3,760 kg, total length: 2,560 mm, construction width: 1,150 mm, Diesel forklift truck Chassis number: SF18E-51018 Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: New Front tires type: Superelastic Gtodpsl A A U Esfx Admot Front tires Size: 7.00-12 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: 6.00-9 Rear tires Condition: 80 - 100% Description: New device with a manufacturer's warranty of 24 months, but a maximum of 2,000 operating hours. The first entry applies. Immediately available. Sideshift, tine adjuster, Pre-hung sideshift 1,000 mm tine adjuster optionally available from € 2,480. 3rd valve, 4th valve, rear work lights, front work lights, CE certificate, Fingertip Control

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 330 h, load capacity: 3,500 kg, lifting height: 5,500 mm, free lift: 1,495 mm, fuel type: diesel, mast type: triplex, construction height: 2,550 mm, power: 36 kW (48.95 HP), fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 4,630 kg, total length: 2,795 mm, drive type: Diesel, construction width: 1,290 mm, Diesel Forklift Load Center: 500 mm Fork Width: 125 mm Fork Thickness: 45 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Condition: As new Technical Condition: Very good Front Tires Type: Super elastic Front Tires Size: 250-15 Rear Tires Type: Super elastic Godpfxexvt Hye Admett Rear Tires Size: 6.50-10 Description: Demonstration / rental unit incl. full cabin and heater. Sideshift, Additional attachments such as fork positioner available as option 3rd valve, 4th valve, rear work light, front work light, heater, load guard, full cabin, full free lift, CE certification, safety light, Demonstration / rental unit incl. full cabin and heater

Condition: used, functionality: fully functional, machine/vehicle number: CF19G-50083, Year of construction: 2024, operating hours: 2 h, load capacity: 5,000 kg, lifting height: 4,140 mm, free lift: 1,630 mm, fuel type: diesel, mast type: duplex, construction height: 2,580 mm, power: 54 kW (73.42 HP), fork carriage width: 1,190 mm, fork length: 1,520 mm, empty load weight: 6,850 kg, total length: 3,170 mm, drive type: Diesel, construction width: 1,460 mm, Diesel Forklift VIN: CF19G-50083 Gtodpfx Asv U E Tysdmjt Load Center: 500 Fork Width: 150 mm Fork Thickness: 50 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Duplex Condition: New Technical Condition: New Front Tire Type: Super Elastic Front Tire Size: 300-15 Front Tire Condition: 80 - 100% Rear Tire Type: Solid Rubber Rear Tire Size: 7.00-12 Rear Tire Condition: 80 - 100% Description: New with a 24-month warranty, but a maximum of 2,000 operating hours. The first warranty applies. Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, heating, load protection grid, soot filter, full cab, CE certificate, interior mirror, seat heating,

Year of construction: 2023, operating hours: 1 h, condition: used, power: 36 kW (48.95 HP), empty load weight: 3,760 kg, total length: 2,560 mm, lifting height: 5,500 mm, free lift: 1,355 mm, mast type: triplex, construction height: 2,415 mm, fork length: 1,200 mm, fork carriage width: 1,000 mm, drive type: Diesel, load capacity: 2,500 kg, construction width: 1,150 mm, Diesel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm Gtjdpfx Aeui Uhrsdmjt ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: 7.00-12 Rear tires Type: Superelastic Rear tires Size: 6.00-9 Description: New device with a manufacturer's warranty of 24 months but a maximum of 2,000 operating hours in compliance with the maintenance instructions. The first entry applies. Sideshift, Other attachments such as tine adjuster optionally available. 3rd valve, 4th valve, rear work lights, front work lights, load guard, CE certificate, safety light, Windshield and roof cover / half or full cab incl. heating optionally available at extra cost.

Condition: used, Year of construction: 2022, operating hours: 2 h, load capacity: 3,500 kg, lifting height: 5,500 mm, free lift: 1,495 mm, mast type: triplex, construction height: 2,550 mm, power: 36 kW (48.95 HP), fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 4,820 kg, total length: 2,795 mm, drive type: Diesel, construction width: 1,290 mm, Diesel forklift Load center: 500 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: torque converter / automatic Gtedpfx Adoiy S Itomot Technical condition: New Front tires Type: Superelastic Front tires Size: 250-15 Rear tires Type: Superelastic Rear tires size: 6.50-10 Description: New machine with a manufacturer's warranty of 24 months, but a maximum of 2,000 operating hours. The first entry applies. Immediately available. Sideshift, tine adjuster, Fork positioner optionally available from € 2,480. 3rd valve, 4th valve, rear work lights, front work lights, load guard, CE certificate,

Year of construction: 2024, operating hours: 1 h, condition: used, power: 54 kW (73.42 HP), empty load weight: 6,850 kg, total length: 3,170 mm, lifting height: 4,100 mm, free lift: 160 mm, mast type: simplex, construction height: 2,850 mm, fork length: 1,520 mm, fork carriage width: 1,190 mm, drive type: Diesel, load capacity: 5,000 kg, construction width: 1,460 mm, Diesel forklift Gtedpfxsui Uiis Admst Load center: 500 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: torque converter / automatic Condition: New machine Technical condition: New Front tires Type: Superelastic Front tires size: 300-15 Rear tires Type: Superelastic Rear tires size: 7.00-12 Description: New machine with a manufacturer's warranty of 24 months in accordance with the manufacturer's warranty conditions. Sideshift, tine adjuster, 3rd valve, 4th valve, rear working lights, front working lights, soot filter, interior mirror, rotating beacon, seat heating, LED, seat,

Year of construction: 2023, operating hours: 1 h, condition: used, power: 36 kW (48.95 HP), empty load weight: 3,760 kg, total length: 2,560 mm, lifting height: 4,750 mm, free lift: 1,085 mm, mast type: triplex, construction height: 2,145 mm, fork length: 1,200 mm, fork carriage width: 1,000 mm, drive type: Diesel, load capacity: 2,500 kg, construction width: 1,150 mm, Diesel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm Gsdpeui Uhfsfx Admett ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: 7.00-12 Rear tires Type: Superelastic Rear tires Size: 6.00-9 Description: New machine available immediately. Manufacturer's warranty 24 months, maximum 2,000 operating hours. Depending on which value occurs first. Sideshift, Other attachments such as tine adjuster optionally available. 3rd valve, 4th valve, rear work lights, front work lights, load protection grille, CE certificate, Windshield and roof cover / half or full cab incl. heating optionally available at extra cost.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,068 h, load capacity: 4,000 kg, lifting height: 3,240 mm, construction height: 2,300 mm, overall weight: 5,080 kg, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 4,000 kg Lift height: 3,240 mm Overall height: 2,300 mm Fork length: 2,400 mm Gtodpfjx E Tgzox Admjt MACHINE DETAILS Drive type: 6-cylinder LPG engine Front tires: 8.25-15 (70%) Rear tires: 7.00-12 (60%) Weight: 5,080 kg Operating hours: 7,068 h EQUIPMENT 3rd hydraulic valve Rear work lights Side shifter

Condition: used, mileage: 254,395 km, first registration: 02/2005, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 6,350 mm, total width: 2,220 mm, total height: 2,950 mm, loading space length: 4,300 mm, loading space width: 2,100 mm, loading space height: 2,050 mm, Year of construction: 2005, Suspension: leaf spring Front axle: steered Rear axle: twin tyres Gross vehicle weight: 3,500 kg Gtodpjx Tyy Rsfx Admot Contact Thierry Leemans for more information.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, number of axes: 5, This 5-axis Mitsubishi MV2400 S wire EDM machine was manufactured in 2016. It features a 600 mm X-axis travel, 400 mm Y-axis travel, and 310 mm Z-axis travel. Capable of handling workpieces up to 1500 kg, it offers dimensions up to 1050 mm in length and 820 mm in width. Consider the opportunity to buy this Mitsubishi MV2400 S wire EDM machine. Contact us for more information. Gtedpfex Urafjx Admot • Maximum workpiece length: 1050 mm • Maximum workpiece width: 820 mm • Maximum workpiece height: 305 mm • Maximum workpiece weight: 1500 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 11,746 h, load capacity: 2,500 kg, lifting height: 3,680 mm, construction height: 2,300 mm, overall weight: 3,820 kg, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 2,500 kg Lift height: 3,680 mm Overall height: 2,300 mm Fork length: 1,100 mm MACHINE DETAILS Drive type: 4-cylinder LPG engine Front tires: 7.00-12 (70%) Rear tires: 6.00-9 (60%) Weight: 3,820 kg Operating hours: 11,746 h EQUIPMENT 3rd valve Front work lights Side shift Gjdpfx Ajx E Tdyodmott

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, total height: 2,380 mm, overall weight: 3,725 kg, product length (max.): 2,145 mm, This 4-axis Mitsubishi EA 12S die-sinking EDM machine was manufactured in 2016 in Japan. It features X/Y/Z travels of 400/300/300 mm, a maximum workpiece weight of 700 kg, and a stainless steel table measuring 700 × 500 mm. Equipped with a C-axis and Erowa chuck, it also includes a dielectric filtration system with a 400 L tank. Consider the opportunity to buy this Mitsubishi EA 12S die-sinking EDM machine. Contact us for more information about this machine. Gsdpfox Uq Syjx Admott • Maximum Workpiece Dimensions: 850 x 640 x 250 mm • Maximum Workpiece Weight: 700 kg • Maximum Electrode Weight: 50 kg • Table Dimensions (LxW): 700 x 500 mm • Table Surface: Stainless steel • C-axis with Erowa Chuck: 152.5 – 452.5 mm • Maximum Dielectric Filling Level Stroke: 300 ml • Filtration System: Yes • Tank Capacity: 400 L • Filter Particle Fineness: 3 / 2 µm • Dielectric Temperature Control: Yes • Pulse Generator Power Supply with Transistor Control • Cooling Method: Fully Sealed, Indirect Air Cooling Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 2013, load capacity: 13 kg, controller manufacturer: MITSUBISHI, number of axes: 6, This 6-axis Mitsubishi RV-13FLM D1 S15 robot arm was manufactured in 2013, featuring a comprehensive operating range with base rotation of ±240° and wrist roll of ±360°. It's equipped with powerful motors, including 1500 W for both the base and shoulder. If you are looking to get high quality robotic arm capabilities consider the Mitsubishi RV-13FLM D1 S15 machine we have for sale. Contact us for more information. Axis Operating Range: • J1 (Base Rotation): ±240° (Total 480°) • J2 (Shoulder): -150° to +90° (Total 240°) • J3 (Elbow): -72.5° to +95° (Total 167.5°) Gsdsx D H Nkspfx Admstt • J4 (Wrist Yaw): ±200° (Total 400°) • J5 (Wrist Pitch): ±120° (Total 240°) • J6 (Wrist Roll): ±360° (Total 720°)Axis Power: • J1 (Base): 1500 W • J2 (Shoulder): 1500 W • J3 (Elbow): 750 W • J4 (Wrist Yaw): 400 W • J5 (Wrist Pitch): 200 W • J6 (Wrist Roll): 100 W