Used Ott Euromatic for sale (71)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, working width: 1,300 mm, Wide belt sander, sanding machine 1300mm Manufacturer: Ott Model: RSO-1300 Year of manufacture: 1992 Working width: 1300mm with roller 15 kW and Hjdpfoxruw Eex Ad Eew shoe 11 kW + brush Feed speed: 10m & 20m

Condition: used, Year of construction: 1978, Number of belts: 2-belt Maximum working width: 1100 mm Minimum working height: 3 mm Maximum working height: 160 mm 1st belt: calibration roller Diameter of 1st roller: 260 mm Type of 1st roller: grooved rubber roller Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1100 mm Abrasive belt speed 1st unit: 25 m/sec Drive unit 1: kW 2nd belt: pad unit Sanding shoe 2nd unit: pneumatic Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1100 mm Abrasive belt speed 2nd unit: 25 m/sec Hodpfx Adexta H Io Esw Drive 2nd unit: kW Cleaning brushes: yes Feed speed: 7 m/min set, 14 m/min set Control: hand control panel Electrical/pneumatic belt oscillation: yes Table lift: electric motor Table display: mechanical numeric display Operating pressure: 6 bar Machine number: 185 Weight approx.: 2500 kg Dimensions: 1800 x 2000 x 1900 mm Extraction connection diameter: 2 x 200 mm Stock location: Nattheim

Condition: used, Veneer press Ott type 300 K 100 with electrically heated plates for pressing veneer or other workpieces. Pressing surface: 255 x 135 cm Hsdpfxsxqff De Ad Ejw

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: T/41242, workpiece height (max.): 52 mm, edge thickness (max.): 12 mm, working height: 880 mm, empty load weight: 3,000 kg, throughput speed: 233 mm/s, TECHNICAL DETAILS Operating Method: Single-sided, right-hand operation Edge Thickness: 0.2 – 12 mm Workpiece Dimensions Minimum Width: 70 mm Minimum Height: 8 mm Maximum Height: 52 mm Minimum Length: 150 mm Feed Speed: 10 – 14 m/min Working Height: 880 mm Hjdjxtfchjpfx Ad Eew MACHINE DETAILS Processing Units Jointing Section with 2 HF motors, 1.5 kW Double End Trimming Unit with 2 HF motors, 0.3 kW Flush Milling Unit with 2 HF motors, 0.7 kW Fine Chamfer Mill with 2 HF motors, 0.3 kW Fine Radius Mill with 2 HF motors, 0.3 kW Corner Rounding Unit with 2 motors, 0.35 kW Scraper Unit for Plastic Edges Dimensions & Weight Machine Dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine Weight: 3,000 kg Operating Voltage: 400 V, 50 Hz Total Connected Load: 12 kW Electrical Connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double roller top pressure with electronic positioning Automatic coil magazine for rolls up to 800 mm diameter with pneumatic cut-off device for up to 3 mm thickness Automatic edge magazine with optical monitoring for fixed-length edge strips Infeed fence with automatic positioning after inputting the jointing value CM - CombiMelt - Modular glue application system Control system via 7-inch TFT color touch display 100 freely alphanumeric storable work programs PLC for high-resolution track control Individual frequency inverters for separate activation of processing motors Hole detection system for skipping CNC processing Network capability for integration into a data network

Condition: excellent (used), Year of construction: 1996, OTT ALPHA 110 wide-belt sander - machine in stock - after the technical review - very good condition - German production - year of production 1996 - segment shoe - a perfect solution for varnish / veneer TECHNICAL SPECIFICATIONS: - grinding width 1100 mm - grinding height 1-150 mm - combi unit with task-controlled membrane sanding shoe - engine power 11 kW - blowing on the belt - pneumatic oscillation - two types of belt speed 4.5 and 18 m / s - aggregate with felt roller - engine power 0.75 kW - shaft oscillation - aggregate with a cleaning brush - engine power 0.75 kW - smoothly regulated feed - feed speed range 4-18 m / min - 1.5 kW feed motor power - electric height adjustment - vacum table - 3kW fan motor power - diameter of nozzles 4 x 120 mm and 1 x 150 mm Transport dimensions: Hsdogi Dryopfx Ad Ejw - length 200 cm - width 245 cm - height 210 cm - weight 2500 kg 1. The Alpha Combi aggregate is a grinding unit with a contact shaft with a diameter of 150 mm and a hardness of 90 shor. It is integrated with a sectional pneumatic shoe with a section width of 27 mm 2. EMS 27 optical system - detects minimal unevenness and adjusts the pressure force of a particular section of the shoe at a given point of the ground element. 3. It is possible to control the individual sections of the shoes adjacent to each other in the range -2 to +4 -

Condition: good (used), Veneer press OTT 300 K-DSP Hsdpfx Ajxk Urajd Ejw 30 tons pressing force Year of manufacture: 1993 Max. format: 480 cm length, 150 cm width Press height: 88 cm. Includes mobile scissor lift table on rails, dimensions LxW approx. 141x103.5 cm, extendable up to 300 cm, height-adjustable outfeed roller conveyor dimensions LxW approx. 480x180 cm, 2-section, 2-way pneumatic roller conveyor, total dimensions LxWxH 500x103x92 cm. Required footprint for the entire unit is approx. 600x570 cm.

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding Hjdpfxevxuxms Ad Eow – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: used, Year of construction: 1997, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibration roller Diameter of 1st roller: 150 mm Design of 1st roller: grooved rubber roller 90 degrees Shore Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1120 mm Sanding belt speed of 1st unit: 18 m/sec Drive of unit 1: 11 kW 2nd belt: Sanding unit shoe Sanding shoe of 2nd unit: electronic individual links 45 mm segment width Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1120 mm Sanding belt speed 2nd unit: 18 m/sec Drive of 2nd units: shared motor with 1st unit with rigid sanding pad for solid wood and frame sanding. Lacquer sanding possible: No. Fixed feed speed: 5/10 m/min. Control: Hand control panel. Electric/pneumatic belt oscillation: Yes. Table lift: Electric. Table display: Digital. Operating pressure: 6 bar. Machine number: E / 79191. Dimensions: 1930 x 1700 x 1980 mm. Motor power: 12 kW. Extraction diameter: 2 x 150. Storage location: Nattheim. Hsdpfx Aoxq Apted Eow

Condition: refurbished (used), Year of construction: 1972, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 6619, Classic heavy-duty through-feed press featuring modern control technology with a uniquely large press bed Specifications • Brand: Paul Ott • Type: Through-feed press • Year of manufacture: 1972 • Press bed dimensions: 2300 mm x 3600 mm • Infeed and outfeed table dimensions: 3900x2560 mm • Maximum stroke: 140 mm • Number of cylinders: 8 • Pressing force: > 100 bar • Connected load: 380V • Control system: Siemens PLC Hedexgfgaopfx Ad Eow • Heating: Top and bottom plates hydraulically heated • Infeed and outfeed: Fully automated or manual • Condition: Completely overhauled in 2020 and ready for operation This robust through-feed press has been thoroughly overhauled, both hydraulically and mechanically, and is equipped with a modern Siemens control system. It combines classic durability with contemporary automation technology, making it ideal for industrial applications requiring reliability and flexibility. Further information: • The machine can be viewed in operation at our site in Tilburg • Overhaul and maintenance reports available for inspection • Transport and installation can be arranged by agreement

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: - Round pot glue application unit - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for crosscutting/end cap cuts - Top/bottom milling: 2 milling units with copy wheels for radius or chamfer - Radius scraper: pneumatically controlled, for post-processing of radii - Flat scraper: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finish - Riepe spray system - Control: PLC with operator panel - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120x840x1385 mm Hedpfxoxdpm Sj Ad Ejw Machine weight: approx. 3,000 kg Availability: short-term Location: Bavaria

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 18 kW (24.47 HP), I am listing this machine on behalf of a customer! The edge bander is ideal for solid wood edges up to 20 mm thickness and 60 mm width! The machine is ready for immediate use. The edge bander is also equipped with a jointing cutter. Solid wood edges up to 60 mm wide and 20 mm thick can be edge-banded with this machine. The machine can still be inspected under power. Hjdpfoxn Nuwex Ad Ejw

Condition: ready for operation (used), Year of construction: 1986, Ott Höfer 2-Roller Glue Application Machine Hjdpfx Ajxqrdasd Eew ZLA 1300 Working width: 1300 mm Max. workpiece thickness: 80 mm Roller diameter: 165 mm Both rollers are in good condition Feed speed: 18 m/min Drive power: 0.75 kW Working height: 800 mm Required space: 2000 x 750 x 1150 mm Weight: 500 kg

Condition: used, No. 04488 Hjdpsxbh Atefx Ad Ejw Veneer press Ott JU 2512 Used Heating plates 2500 x 1200 mm LW The plates are heated electrically, power per plate 8.4 kW Total pressing pressure 90 tons Specific pressing pressure 3.0 - 4.0 kg/cm2 4 pressure cylinders, each 90 mm in diameter Opening width 400 mm Button control for opening - stop - closing Circumferential emergency stop rip cord Technical documentation available Transport dimensions approx. 2900 x 1450 x 2000 mm LWH Weight approx. 3600 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Hedpfxovvkfqo Ad Eow Storage location: Nattheim

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Hjdpfx Asxgpaqsd Esw Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Features and technical data: Hsdpfx Ajwxh Dujd Esw Max. working width: 1100 mm Min / max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm Sanding belt speed: 18 m/sec Feed speed: 4 + 8 m/min Sanding unit motor power: 15 kW Feed belt motor power: 1.1 / 1.8 kW Operating pressure: 6 bar Air consumption: 20 l/min Extraction nozzles: 2 x 150 + 1 x 120 mm Dimensions: 2690x1800x2100 mm Weight: approx. 3500 kg Note: Machine is not operational (feed belt is missing) Storage location: Flörsheim Availability: by arrangement

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total length: 4,000 mm, total width: 1,200 mm, total height: 1,400 mm, OTT ATLANTIC EDGE BANDER 2 HM SAW BLADES 140X3.2X16 Z=36 FLUSH MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS FINE MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS SCRAPING UNIT WITH 2X HM SCRAPERS, AUTOMATIC FEED Hodpfx Adoww H Ene Esw EDGE CLEANING – OSCILLATING BRUSHES MACHINE LENGTH: 4.50 M

Condition: ready for operation (used), Year of construction: 1994, Ott EURO WS 110 Wide Belt Sander 2-Belt Combination 1st Unit: 90 Shore grooved rubber roller 2nd Unit: Shoe unit with time-controlled air sanding shoe Working width: 1100 mm Minimum workpiece thickness: 3 mm Maximum workpiece thickness: 160 mm Belt size: 1900 x 1120 mm Sanding belt speed: 18 m/sec Feed speed: 5/10 m/min Total connected load: 12.5 kW Price: 8,200.- Hedpfxoxp N Iae Ad Eow

Year of construction: 1968, condition: ready for operation (used), An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible. Hsdpjxd Auisfx Ad Eow

Condition: used, Year of construction: 2013, operating hours: 16,073 h, functionality: fully functional, machine/vehicle number: T/41521, year of last overhaul: 2025, OTT Tornado TOP + LIGMATECH EKOMAT ZHR 01/R/065 Return Device Year: 2013 The machine is equipped with: RMV-40 – Automatic edge band magazine, 0.4-3mm edge thickness, end trimming shears with roller and optical sensor for reducing edge length on the workpiece (saves edging material). Automatic edge feed hopper with optical detection for fixed-length edging pieces. Combi Melt – Gluing zone, supports EVA and PUR hot-melt adhesives, as well as all standard cleaning granulates. Machine Control: Operated via a 15-inch color touchscreen monitor, unlimited number of work programs can be sequentially saved, all preselection of processing aggregates as well as working parameters for the CombiMelt gluing system allow for full automation and maximum operator comfort. Electronic control – reference points with high accuracy +/- 1 mm. Via Beckhoff industrial PC, certain tool aggregates can be adjusted during machine operation/loading. Working Aggregates: Hsdpfxsxpphaj Ad Eew -F- Pre-milling unit: For pre-milling workpieces before adhesive application. 2 HF motors, 1.5 kW, forward and reverse, automatic control. -Kc- Double end-trimming unit: With 2 high-frequency motors, 0.3 kW, 12,000 rpm. -Bfc– Rough milling cutter Heavy-duty cutter for milling solid edges from the surface and profiling before rounding radii. -Hft- Fine milling unit - Radius With 2 high-frequency motors, 0.3 kW, 12,000 rpm, double-sided, automatically adjustable. -AKF- Automated copying milling unit as a universal milling aggregate: With two independent spindles for top and/or bottom longitudinal as well as corner processing. Automatically switches from beveling for thin edge up to 1 mm to radii processing. -ZKc- Scraper aggregate R2 Double-sided processing, automatic control, for removing rounded areas. FZK: Flat scraper for removing excess edge and glue residues. -GE- Second guide operation for workpiece leading (can be folded away or towards the machine as needed). -GS- Application of glide agent to the edge. -RS Set – 4-way chemical spraying and cleaning unit. -ZKc- Scraper aggregate R1. -WE: Angular stop – ensures precise infeed of the workpiece to the edgebander. Trouble-free machine in excellent condition, regularly serviced by OTT (Asamer s.r.o.) The machine is currently operating in production and can be tested - we are processing with PUR adhesive. Available for collection end of 2025.

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Motor power: 1.1 kW Heating-up time approx. 20 min. Price ex works. Hodpfx Aewx Rrned Ejw

Condition: used, OTT Comet-2 1100 • Wide belt sander Hjdpfsxfaa Eex Ad Esw • Sanding width 1100 mm • Machine is untested • Service recommended • No warranty / No liability • Ex stock Lieboch, net price €1,500.00

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: T/41242, workpiece height (max.): 52 mm, edge thickness (max.): 12 mm, working height: 880 mm, empty load weight: 3,000 kg, throughput speed: 233 mm/s, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Operation: Single-sided, right-hand version Edge thickness: 0.2 – 12 mm Workpiece dimensions Minimum width: 70 mm Minimum height: 8 mm Maximum height: 52 mm Minimum length: 150 mm Feed speed: 10 – 14 m/min Working height: 880 mm MACHINE DETAILS Processing units Jointing unit with 2 high-frequency motors, 1.5 kW Double end trimming unit with 2 high-frequency motors, 0.3 kW Flush trimming unit with 2 high-frequency motors, 0.7 kW Fine trimming CHAMFERING unit with 2 high-frequency motors, 0.3 kW Fine trimming RADIUS unit with 2 high-frequency motors, 0.3 kW Corner rounding unit with 2 motors, 0.35 kW Scraper unit for plastic edges Dimensions & Weight Machine dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine weight: 3,000 kg Operating voltage: 400 V, 50 Hz Total connected load: 12 kW Electrical connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double roller top pressure with electronic positioning Automatic roll magazine for coils up to 800 mm diameter, with pneumatic guillotine for edge thickness up to 3 mm Automatic edge magazine with optical monitoring for strip edges in fixed lengths Infeed fence with automatic positioning when inputting the jointing value CM - CombiMelt adhesive application system in modular design Control system via 7-inch TFT color touchscreen display 100 work programs freely and alphanumerically programmable Hsdpfxsxa Acro Ad Eew PLC for high-resolution feed control Individual frequency inverters for independent activation of processing motors Hole recognition to suppress CNC operations Network capability for integration into a data network

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado Top Edge Banding Machine in Excellent Condition PU glue pot with release agent, also suitable for EVA adhesives. We had the entire machine recalibrated in September 2024. The glue unit was replaced. The results are perfect with transparent adhesive and incredible with white panels using white adhesive. The machine runs perfectly and without any problems. Technical specifications: Edge thickness: 0.4 - 8 mm Panel thickness: 8 - 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm Cross-cutting unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner rounding unit Scraper blade Buffing unit Triple spraying Total power: 17.5 kW Hsdpfx Aev Sm Hced Esw Dimensions: Length: 6180 mm Width: 1770 mm mm Weight: 3100 kg - Available immediately -

Condition: used, No. 04485 Veneer press Ott JU 2513 Hjdpfxsw Npbze Ad Esw Used Electrically heated heating plates Hydraulic pressing pressure Aluminum heating plates Plate dimensions 2550 x 1350 mm LW BUSSE heating plates renewed in 2019 and covered with Mylar film 4 hydraulic cylinders each 90 mm diameter Total pressing pressure 90 tons Specific pressing pressure 2.8 - 4.0 kg/cm2 Button control for closing / opening / stop Emergency stop rip cord Opening width 400 mm Total power 19 kW Stable construction with 3 longitudinal beams in the upper part of the press and 2 longitudinal beams in the press table Transport dimensions approx. 2900 x 1500 x 2000 mm LWH Weight approx. 4200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse