Used Oscillating Mortiser for sale (768)

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: Dkedpfxexg Hrks Ahusw - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, functionality: fully functional, grinding width: 630 mm, grinding height: 150 mm, height adjustment type: electric, - Italian-made - Used sander, in very good condition TECHNICAL SPECIFICATIONS: - Maximum working width: 630mm - Maximum working height: 150mm 1 unit: + - Grooved rubber calibrating roller + pad + 1 metal roller: + *from above: - Rubber feed-in slip roller: + - Processing unit: + - Rubber feed-out slip roller: + *from below: - Rubber slip roller: + - Feed belt: + - Pneumatic belt oscillation with photocells: + - 2 feed speeds: 0.28kW - Motor: 6kW Dkodjw Ip Ekjpfx Ahusw - Electric brake: + - Electric table elevation: + - Working pressure: 6-8 bar - Extraction nozzle diameter: 150mm - Overall dimensions (L/W/H): 1070x1320x1900mm - Weight: 722kg

Condition: excellent (used), power: 60 kW (81.58 HP), fuel type: diesel, color: orange, first registration: 06/2004, Year of construction: 2004, operating hours: 3,150 h, Drive: Wheel Number of cylinders: 4 Empty weight: 7.050 kg Dkodpswywmzofx Ahuew Working width: 168 cm Technical condition: very good Visual appearance: very good Stock status: Expected soon Price: On request Please contact Ernst van Hek for more information Hamm 3307HT VIO – 2004 Offered for sale: Hamm 3307HT VIO compactor in excellent condition, directly from the first owner! • Year of manufacture: 2004 • Working hours: 3,150 h • Operating weight: 7,050 kg • Engine: Deutz BF4M 1011F – 61 kW / 81.7 HP • Drum width: 168 cm • Vibration and oscillation (VIO system) • Very clean machine, well maintained Ready for work!

Condition: used, Technical details: pressure: 25 t Dodpfx Asvc Awxjhuokw stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element Dodpoxl Aaujfx Ahujkw

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. Djdpfx Ahel Dw D Eouokw At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: refurbished (used), Year of construction: 1991, HAAS drum chipper type HTH-160x510 L2WV completely refurbished / reconditioned with new bearings (spherical roller bearings) and tested rotor New knives and counter knives Feed width/height: 510 x 160 mm Rotor diameter: 500 mm Screen perforation: 60 x 60 mm Drive power: 45.0 kW Feed motors: 2 x 2.2 kW Weight: approx. 3,000 kg Machine colour: RAL 6011 Reseda green Without electrical installation incl. control cabinet with all installations relating to the system in accordance with CE standard. Operation on the cabinet door, without cable 1 unit Vibrating conveyor type HVSR 500x8000 completely refurbished / reconditioned with new bearings (spherical roller bearings) and tested oscillating elements Chute width: approx. 500 mm Chute length: approx. 8,000 mm Chute height: approx. 170 mm Wall thickness: approx. 5 mm Feed height feed: approx. 450 mm Total height feed: approx. 770 mm Discharge height discharge: approx. 950 mm Total height discharge: approx. 1,120 mm Drive power: approx. 4.0 kW Weight: approx. 1,400 kg Machine colour: RAL 6011 Reseda green Rising vibrating chute (approx. 4.5 °) Djdpfxow H Eqzs Ahuskw incl. screening zone 15 x 15 mm, L = 500 mm incl. metal-free zone made of wood, new (L = 1,500 mm) incl. metal detector, second-hand without electrical installation 1 unit HAAS scraper chain conveyor type HKF-490x11,000 completely refurbished / reconditioned with new bearings, tested conveyor chain and flights Width: approx. 500 mm (600 mm) Length: approx. 11,000 mm Trough height: approx. 570 mm With bottom curve: 45° Total height: approx. 6,700 mm Drive power: approx. 5.5 kW without electrical installation

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 950 mm, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, - Italian-made - Year of production: 2007 - Combination pad (combi shoe) TECHNICAL SPECIFICATIONS: - Sanding width: 950 mm - Sanding height: 4-170 mm - Motor power: 7.5 kW - 1st unit: Steel roller with pneumatic lift - Roller diameter: 110 mm - 2nd unit: Combination pad (combi shoe) - Pneumatic lift for rubber roller: 78 Shore - Pad with pneumatic lift - Pneumatic oscillation - Air cleaning for sanding belts - Electric height adjustment - Two belt speeds: 8.3 m/s and 16 m/s - Electronic sanding height positioning - Feed speed, stepless adjustment: from 4-20 m/min - Minimum workpiece length: 500 mm - Extraction port diameter: 2 x 140 mm Dsdpfxexdxfqj Ahuskw - Machine dimensions (L/W/H): 150 x 180 x 210 cm - Weight: ~1010 kg

Condition: excellent (used), Bargain from liquidation with feed and oscillation Dedjxn Skzspfx Ahuskw

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT ROLLER, 2ND BELT COMBINATION UNIT ROLLER/SHOE FOR SOLID WOOD, VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 Djdpfxsw Tfwts Ahuokw - Rubber-coated SANDING ROLLER mm: 180 - SANDING SHOE WIDTH mm: 50 - MAIN BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER hp: 0.75 - Infinitely variable feed belt gearbox, speed adjustable m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR hp: 0.33 - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed Availability: short notice Location: Flörsheim

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 616 h, load capacity: 200 kg, fuel type: diesel, empty load weight: 2,900 kg, drive type: Diesel, arm reach: 4,700 mm, working height: 9,500 mm, Rail-road aerial work platform Technical condition: good Dkedpfx Asv Ut Hbehujw Description: Hydrostatic drive for modern on-track operation and a 200 kg basket load for sufficient working capacity. Automatic leveling of the upper carriage. Full working pattern up to 200 mm cant. Also offers a dynamic working pattern (allowing the machine to move in these positions). Conforms to Machinery Directive 2006/42/CE, EN 280-2015. Emergency electric pump. Easy transport via 3.5 t trailer. Can be quickly rerailed and derailed. Ready for quick-change axle system. On-board diagnostic display. Scanreco radio remote control. Oscillating axle. Speed indicator.

Condition: used, Power: 1 kW (1 HP) Manufacturer: Erweka Model: AR400 Type : Oscillating powder granulator Power : 0,5 KW Djdswwmmrepfx Ahujkw Coupling for quick and easy attachment of various devices. Available tools: FGS calibrator (Mesh size: 1.40 (x3); 1.25; 0.80 (x2); 3.15 (x2); 0.1) Materials in contact with product: stainless steel Variable speed

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, power: 36.5 kW (49.63 HP), load capacity: 680 kg, lifting height: 16,000 mm, lifting power: 680 kg/m, platform length: 3,980 mm, platform width: 1,830 mm, overall weight: 9,190 kg, transport length: 4,880 mm, transport width: 2,270 mm, transport height: 3,190 mm, construction height: 2,490 mm, fuel type: diesel, fuel tank capacity: 100 l, tire size: 355/55D625 (Non-marking), tire condition: 100 %, wheelbase: 2,860 mm, ground clearance: 300 mm, color: red, Equipment: UVV, all wheel drive, differential lock, soot filter, tilting carriage, === MAIN SPECIFICATIONS === Year of manufacture: 2024 Operating hours: 1 Machine width: 2.27 m Djdexb Syiopfx Ahuskw Drive system: 4x4 Driveable at full height: Yes Extendable platform: Yes (1.43 m + 1.16 m superdeck) Power: 36.5 kW (Kubota V2403-M-DI) Working height: 18.00 m Platform capacity: 680 kg (227 kg on extension) Power type: Diesel Battery type: — Automatic leveling: Yes (auto leveling system) Platform size (L × W): 3.98 × 1.83 m Tire type: Non-marking CE certification: Yes Weight: 9,190 kg Indoor / Outdoor use: Outdoor === HIGHLIGHTS === • 4x4 drive with oscillating axle and auto-leveling system • Driveable at full height for higher productivity • Superdeck platform with dual extensions (1.43 m + 1.16 m) • Non-marking tires – ideal for finished or sensitive surfaces • Powerful Kubota diesel engine (36.5 kW) • CE certified and ready for immediate use === CONDITION === Brand-new 2024 model with only 1 operating hour. Fully tested and technically inspected. Immediately available from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). The Magni DS 1823 RT is a high-performance diesel scissor lift with an impressive 18 m working height and 680 kg lifting capacity. Equipped with 4x4 drive, automatic leveling and a Superdeck platform, it is ideal for outdoor construction and maintenance work. Fully CE certified and available directly from stock. === SHIPPING === Crane loading available upon request. Flexible delivery options tailored to your destination. All shipments handled professionally by the Collé Rental & Sales logistics team.

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, total height: 1,900 mm, total length: 1,500 mm, total width: 700 mm, overall weight: 500 kg, Mortising machine for furniture locks Manufacturer: Weeke SEM/1 Year of manufacture: approx. 1959 Machine data: Dimensions (L/W/H) approx. 700 x 500 x 1750 mm With chassis and stop: approx. 1500 x 700 x 1900 mm Total weight approx. 500 kg Detailed description: see function description in images Pneumatic clamping via foot switch Dkjdpfx Aeugv Akohusw Mobile unit Application: for mortising furniture locks, hinges, strike plates Machine is fully functional and cleaned. Very good condition.

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-B200-2R Year of manufacture: approx. 2000 Pot diameter top: 300 mm Bowl diameter bottom: 180 mm Inner height of bowl: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg Dkodpfx Aju Ailgjhusw good condition A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: new, Hoku KS 150 edge sander manufactured by Rehnen. The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; Motor protection switch and main switch in accordance with VDE regulations; Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm; The sanding belt back panel is covered with a graphite sliding coating; The machine is supplied with an assortment of sanding belts; A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s. - Swivels 90-180° - Motorized belt oscillation - Small support table on the idler pulley - Pneumatic belt tensioning Technical specifications: Motor power: 2.2 kW Sanding belt dimensions: 150 x 2280 mm Sanding belt speed: 22 m/s Table size: 750 x 350 mm Dkjdpfxjwgc D Sj Ahujw Space required: 1000 x 800 mm Weight: from 180 kg Extraction diameter: 100 mm

Condition: used, mileage: 96,454 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 12/2020, emission class: euro6, color: green, number of seats: 2, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Vehicle number (for inquiries): 172 Mercedes-Benz Sprinter 317 CDI 9G-TRONIC LONG 1 owner. Fully service history maintained. Paint Code: * 6418 Paint color yellow-green Interior trim: * VF7 Fabric "Maturin" black Equipment: * AR2 Axle ratio I = 3.923 * BH1 Hold function * BH8 Control code hydroaggregate variant 7 * BK2 Control code wheel brake configuration 2 * C6L Multifunction steering wheel * CB7 Stabilization level I * CL1 Steering wheel adjustable for tilt and height * CW2 Omission of vehicle lowering * D50 Full partition * E07 Hill start assist * E1D Digital radio (DAB) * E3M MBUX multimedia system with 7-inch touchscreen * ED4 Fleece battery 12 V 92 Ah * EE5 Ultracap - automatic transmission lock * ES0 Jump start contact * EW6 Pre-installation Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F64 Electrically folding exterior mirrors * F68 Heated and electrically adjustable exterior mirrors * FF5 Overhead storage above windscreen * FJ4 Storage compartment beneath cockpit * FKA Panel van * FZ9 Two additional main keys * G43 9G-Tronic * H20 All-round heat-insulating glass * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IE0 Model series C907 VS30 Rwd * IG4 Standard * IG5 Basic * IH6 Headunit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IR4 Wheelbase 3665 mm (model code) * IT4 3.5 ton * J10 Speedometer km/h * J58 Seat belt warning system for driver seat * J65 Outside temperature display * JA7 Blind spot assist * JA8 Crosswind assist * JB6 Parking package with 360° camera * JH3 Communication module (LTE) for digital services * JI7 Maintenance interval 60,000 km (initial run) * K13 Main tank 71 liters * KP7 SCR emission control, generation 4 * L13 Fog lights with cornering function * L65 Ceiling lamp load/passenger compartment with door contact * L94 Omission of parking light * LA2 Headlight assist * LB5 Third brake light * LE1 Adaptive brake light * LX5 Europe * M40 Alternator 14V/200A * MJ8 ECO Start/Stop function * MT2 Emission class Euro 6D-TEMP N1 * MU5 Engine OM654 DE 20 LA 125 kW (170 hp) * OH3 Main safety inspection Freshup 3 * Q11 Longitudinal beam reinforcement * Q67 Rear towing eye * R65 Spare wheel carrier under end of frame * RH2 Tyres 235/65 R16 C * RM7 Summer tyres, optimized for rolling resistance * RS3 Steel wheels 6.5 J x 16 * RX5 Wheel supplier Maxion Wheels * S04 Height-adjustable passenger seat * S22 Armrest for driver seat, ISO-fix (child seat securing system) * S25 Armrest for passenger seat, centre armrest rear (FFO) * S87 Low driver seat base * SA5 Driver airbag * SB3 Driver oscillating seat * SE5 Lumbar support for driver seat * SK2 Seat occupancy detection driver seat * T16 Sliding door right * T77 Entry grab handle at load compartment sliding door on partition wall * T86 Entry grip on rear right corner pillar * V94 Cable duct on side wall * V95 Cable duct at rear portal * X99 Manufacturer Mercedes-Benz AG * XC9 COC papers * XG7 Without increase/decrease in weight 3500 kg * XM1 Noise measures * Z1N Registration N1 * Z2E Country version EU-EFTA-UKZ * ZM0 Panel van WARRANTY UP TO 36 MONTHS AVAILABLE. Dksdpfx Aowumqxehujw TRADE-IN AND FINANCING AVAILABLE. You’ll find more vehicles on our homepage: ter

Condition: excellent (used), Year of construction: 1996, OTT ALPHA 110 wide-belt sander - machine in stock - after the technical review - very good condition - German production - year of production 1996 - segment shoe - a perfect solution for varnish / veneer TECHNICAL SPECIFICATIONS: Dkodpfx Ahogi Dryousw - grinding width 1100 mm - grinding height 1-150 mm - combi unit with task-controlled membrane sanding shoe - engine power 11 kW - blowing on the belt - pneumatic oscillation - two types of belt speed 4.5 and 18 m / s - aggregate with felt roller - engine power 0.75 kW - shaft oscillation - aggregate with a cleaning brush - engine power 0.75 kW - smoothly regulated feed - feed speed range 4-18 m / min - 1.5 kW feed motor power - electric height adjustment - vacum table - 3kW fan motor power - diameter of nozzles 4 x 120 mm and 1 x 150 mm Transport dimensions: - length 200 cm - width 245 cm - height 210 cm - weight 2500 kg 1. The Alpha Combi aggregate is a grinding unit with a contact shaft with a diameter of 150 mm and a hardness of 90 shor. It is integrated with a sectional pneumatic shoe with a section width of 27 mm 2. EMS 27 optical system - detects minimal unevenness and adjusts the pressure force of a particular section of the shoe at a given point of the ground element. 3. It is possible to control the individual sections of the shoes adjacent to each other in the range -2 to +4 -

Condition: used, Year of construction: 1982, overall weight: 950 kg, Abrasive belt length 2200 mm, abrasive belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, abrasive belt speed approx. 21 m/s, feed rates 6 - 11 - 16 m/min, main drive motor 7.5 kW, feed motor 0.26 - 0.55 - 1 kW, pneumatic belt oscillation and belt air jet, incl. chassis Djdpsxq Ehxefx Ahuskw

Condition: as good as new (ex-display), functionality: fully functional, grinding height: 200 mm, power: 11.03 kW (15.00 HP), grinding belt speed: 18,000 mm/s, grinding belt length: 2,620 mm, grinding belt width: 1,370 mm, input frequency: 50 Hz, input voltage: 400 V, Additional technical data Feed speed: 2.8 - 20 m/min The new Format4 findustry wide belt sanders impress in industrial applications primarily through their individually configurable assembly of units. Tailored specifically to the application and field of use, the machine can be equipped with two, three, or four units. A high degree of customization guarantees that all requirements in terms of surface finish and processing efficiency are met. Maximum operating comfort in industrial applications The clearly structured touchscreen control panel is intuitive to operate. All machine functions are clearly displayed graphically on the digital display. The pass-through thickness can be set directly from the control panel to a tenth of a millimeter at the touch of a button. Automatic thickness measurement simplifies the adjustment of the machine to the desired workpiece thickness. The workpiece can be measured without additional measuring devices, and its thickness is then transmitted directly to the machine "wirelessly." The fixed infeed table height of 900 mm allows for easy and fatigue-free operation, while a vacuum table, roller table extensions on both infeed and outfeed sides, as well as optional pressure shoes on the sanding units, ensure maximum comfort and optimal processing conditions for workpieces of any size. Optional equipment 10E LACQUER – Cross sanding unit ESC in place of 1st contact roller 20A 2nd contact roller unit Djdpfxoxtpydo Ahuokw 22 2nd sanding roller in 85° Shore 30E LACQUER – Superfinish unit ESC in place of 3rd contact roller 39 Switch contact for slide control (price/piece) *6 51 Soft start for 15kW (20HP motor) 59B Control unit with 15" color touchscreen display 63 Scotch-Brite brushing device at the machine outfeed 71 Oscillating cleaning blower for workpiece and conveyor belt 72 Ionizing bar at the machine outfeed 73 Vacuum table with 4kW (5.5 HP) blower 74 Inverter for vacuum blower for vacuum adjustment 83 Sanding height 200mm instead of 170mm 84 Optimized control software for special processing 87 ESC workpiece detection sensor with 50 segments 201 2nd motor with 15kW power output Additional information Workpiece height: 3 - 170 mm Constant infeed height - fixed table: 900 mm Grooved sanding roller: Ø 250 mm Including delivery and installation in post code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: used, Year of construction: 2017, Fw 1102 Perform Year of manufacture: 2017 5 operating hours 15 kW motor with brake Electric table height adjustment Continuously variable feed 2.5 – 18 m/min Sanding height: 3 – 170 mm Abrasive belt dimensions: 1120 x 1900 mm Belt blowing, timer-controlled Sanding width: 1100 mm Extraction connection: 2 x 160 mm and 1 x 120 mm Vacuum carpet with integrated blower in the machine frame 1st unit: rubber-coated profiled contact roller Djdpfx Ahexrwn Tjuekw 2nd unit: electro-pneumatic segmented sanding pad, 25 mm segment width, for veneer sanding work With lacquer sanding, digital grit compensation Pneumatic sanding belt oscillation Roller table extension on both sides Scotch-Brite brush unit at the machine outlet, 150 mm diameter Electronic sanding belt run monitoring Includes 30 sanding belts

Condition: used, Year of construction: 1989, max. grinding diameter 50 mm grinding length 130 mm workpiece length 200 mm total power requirement 2,2 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 2 x 2 x 2 m Dkjdexd Duqepfx Ahujw EWAG RS 12 universal grinding machine, built in 1989, technically and visually in good condition Grinding head: - Motor power: 2.2 kW - Spindle speeds: 1,000 - 8,000 rpm - Spindle inclination (A axis): -10° to +27° - Adjustment accuracy 1 min - Height adjustment (Y axis): 130 mm - Stroke range (X axis): 220 mm - Oscillation stroke, continuously adjustable during oscillation: 0-30 mm - Oscillation frequency: 30/60 rpm Workpiece slide: - Radius adjustment (Z axis): 0.01-49 mm - Adjustment accuracy: 0.01 mm - Retraction of the slide from the grinding to the measuring position: max. 49 mm - Cross table, clamping surface: 155 x 205 mm - Adjustment range X - Y: 60 mm each - Maximum swivel angle (B axis): 260° - Connection voltage: 380 V - Weight: 1200 kg Several grinding discs are supplied, but not the workpiece holder shown in the picture.

Condition: excellent (used), Catalogue number 7733 TECHNICAL DATA - Belt width: 150mm - Oscillation - Vertical oscillation movement - 2 rotation speeds Dkjdpexdc Enefx Ahujw - Work table: 1180x370mm - Work table adjustment: up/down, front/back and at an angle - Motor: 3kW - Platen - for precise grinding - With fan - Effective sanding length on belt: 700mm - Top/bottom milling cutters for edge chamfering - Extraction port diameter: 70mm - Dimensions (L/W/H): 1550/1400/1300mm - Weight: 490kg ADVANTAGES – with oscillation – with platen – with fan – includes milling cutters for edge processing/chamfering – for both curvilinear and straight sanding – unpainted – used machine, in very good condition Net price: 7500 PLN Net price: 1780 EUR (based on exchange rate 4.2 EUR) (Prices may vary with greater rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6663 TECHNICAL DATA - Drilling spindle: 1 pc - Spindle locking - Oscillation range: 100mm - Max tool diameter: 16mm - Max hole depth: 100mm Dkjdpfjiamdlex Ahuew - Manual table adjustment up/down, front/back - Working table dimensions: 500x300mm - Pneumatic cylinder - Extraction nozzle diameter: 80mm - Centralized bearing lubrication - Oscillation motor approx. 0.75kW - Main motor 2.4kW - Dimensions (L/W/H): 1100x900x1450mm - Weight: 534kg FEATURES – Swedish-made – With oscillation – Used drilling machine, excellent condition Net price: 7,900 PLN Net price: 1,880 EUR (at exchange rate of 4.2 PLN/EUR) (Prices may vary with significant rate fluctuations)

Condition: new, Catalogue number: S 0335 - New machine, in stock - CE certificate SURFACE PLANER: Djdpfx Ajvw Rqishujkw - Working table dimensions: 1500 х 320 mm - Max. planing depth: 5 mm - Aluminium guide fence dimensions: 1100 x 155 mm THICKNESS PLANER: - Working table dimensions: 316 x 600 mm - Max. planing depth: 3 mm - Feed speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Cutterhead speed: 5600 min⁻¹ - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with ground surface * Tables with precise adjustment for longitudinal planing * Stable aluminium fence adjustable from 90° to 45° * Cutterhead guard * Thickness planer table with central guide column and support * Power on/off without stopping the machine * Mortiser with left-hand rotation Net price: 14,500 PLN Net price: 3,440 EUR Price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)