Code: 0463
Brand: RGA
Model: BISPECIAL
Chain and locks mortising machine
Bws7q0fbgm
Technical data:
Vertical stroke mm 180
Longitudinal stroke mm 350
Transversal stroke mm 130
Motor Hp 3,5
Bits motor Hp 0,75
Horizontal cutters motor Hp 2,5
Overall dimensions : mm 950 x 900 x 1850 h
Weight kg 550
Chain mortiser
Brplf7iaw2
- SAC NO 50
- 380V
- 3 fase
Reference: SEC.2224
Motor power: 1,5 kW.
Max. mortise width: 180 mm.
Max. mortise depth: 180 mm.
Chain width: 2x10 mm.
Machine dimensions: 600x950x1900 mm.
Ba7f8wvr7a
Weight: ~200 kg.
Technical characteristics
Mortising type: Chain Door stand
200 mm stroke cast iron table
Elmcw7pv
max depth 150 mm
trim protection
manual presser Power and Motors
Power: 1.5 Kw Overall dimensions
Technical characteristics
Manual descentDoor stand Power and Motors
Bmdjvo83vn
Motor: 2 CV Overall dimensions
Technical characteristics
Bmdjnnpeys
Mortising type: Chain Tilting tableAutomatic lubrication Power and Motors
Power: 2.2 Kw Overall dimensions
Mortising machine, mortising head for rocking chisel mortising machine, drive
-Mortising head for: FE-25 rocker chisel mortising machine
Gvmcio
-Dimensions: 530/380/H185 mm
-Weight: 49.5 kg
Type: KF Condition: function tested, good, used - stand chain cutter - chain lubrication - 1 set 16 mm
Cj3wf2qo
used, top equipment
including setting gauge
Make Maka
Type STV-71
Column machine
Dx0xoa
with caulking tools see pictures
Workpiece stop 2 pieces
Stop rail right / left 2150 mm
Workpiece blow-out 2x
Foot switch
2-hand safety circuit
pneumatic workpiece clamping at the side 1 piece
pneumatic workpiece clamping from above 2 pieces
Extraction connection D 120 mm
Space requirement approx. 1200 mm x 800 mm x 1500 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current ...
Year 1995, command button in the control panel above the machine, brake device for quick tool change,
milling spindle 7,5 kW, 400 V, brake, speed 4000 rpm, spindle diameter 40 mm, max. tool diameter 350 mm, max. tenon length 145 mm, max. clamping height 160 mm, milling spindle height adjustment 80 mm,
cut-off saw 2,2 kW, 400 V, speed 3000 rpm, max. saw blade diameter 450 mm,
max. cutting height 150 mm, max. slot length 390 mm,
Roller table with Festo LAS stop system incl. extension and thus usef...
double spiral
wire diameter 1,5-3,8 mm
mesh width 20-80 mm
working width 3000 mm
capacity - m²/hour 150 m²
Pufuhi
tolling for mesh 50 mm
engine 10 hp
C3kyz990
with crosscut saw
with roller table and length stop
with pneumatic clamping
complete with 1 set of milling tools
Item condition; Used
traces of use: some traces of use
Case: the varnish is damaged
Bft22u2yau
stroke: 170 cm
Voltage: 380 V AC
weight: 650 kg
Storage place: Rosenfeld
Storage location: ETT
- The machine is in a good condition
- The basic dimensions are approx. 2,0 x 1,4 m
- The shaft diameter is 50 mm
- The sliding carriage is not pneumatic, it has to be operated manually.
- The lifting spindle is pneumatic, the travel is approx. 200 mm.
- The machine has worked until it was shut down.
- Recomm...
Chain slotting machine Centauro CVS20
Work table dimensions 460x150mm
Manual lowering with a lever
Automatic lubrication
Working table can be tilted +/-45°.
Motor 2.2kw
Dimensions 1500×800 H1890mm
Bu8jvtx7mk
Weight 420kg
Year 1993
Dürkopp Adler Kl. 564-1/01 Chainstitch machine
Manufacturer: Dürkopp Adler
Designation: Kl. 564-1/01
Type: Chainstitch machine
Item condition: used
Bhb0k072cx
International shipping costs on request!
wire diameter range: 1,8 - 3,8 mm
mesh width: 20 - 80 mm
working width: 800 - 2.000 mm
Bcy7ya3vp7
output: up to 180 m²/hour
double spiral
wire diameter 1,6-3,8 mm
mesh width 50x50 mm
working width 3000 mm
capacity 170 m²
tooling for mesh width 50x50 + 40x40
Nszu7
Masterwood hydraulic chisel mortiser
- Type OMB1 ES 2B
- with overhanging control panel
- vertical and horizontal pneumatic holding cyliders
Boizwkciya
Max: train capacity 25,000 KG
Wi8evhjps
: length tool 3520 mm
Max: cutting speed 9.6 m / min
Passage width 520 mm
The machine worked on connecting rod and connecting rod Cap.
The machine is designed for mass production (emission 400Werkstuecker / hour)
Chain Trencher RAPID Type SKS,
Stroke: 200 mm,
Approx. dimensions: length: 1,000 mm, width: 600 mm, height: approx. 1,900 mm.
Lxdtv
3 horizontal boring spindles
Height adjustable boring spindles
Boring depth max. 75 mm
Boring-Ø max. 13 mm
Dumcbka
Mortising length max. 100 mm
Motor power 1,1 kW
*complete with Compactor WAFIOS AFK 1*
wire diameter range: 1,2 - 2,8mm
mesh width: 20 - 70 mm
working width: 800 - 2.000 mm
Pr2u3ibry
output: max. 170 m²/Stunde
double spiral
wire diameter 1,5-3,8 mm
mesh width 20-80 mm
working width 2000 mm
capacity - m²/hour 150 m²
C08cidius
tolling for mesh 50 mm
Masterwood OM B1 hydraulic chisel mortising machine
Igkfh3a8e
CNC chisel mortising machine MASTERWOOD
secon dhand machine
CE regulation: YES
volt. 380/50
CNC axes 3
workpiece length max. 2750 mm
Max. Depth mortising 110 mm
Height adjustment 80 mm
Main motor Kw 3.6
Feed speed max m / min 20
Motorized feed yes
Bjv8sz2fen
Programmable mortising depth yes
Pneumatic locking system
Numerical control control
CE certification yes
Total power kW 5.2
Weight approx. 1950 kg
Milling and slot arbors: 40x220mm, spindle stroke: 130mm max., milling motor power: 7.5kW, milling motor spindle speed: 7000rpm, slot motor power: 6kW, slot motor spindle speed: 4000rpm.
7d09snf27
Wire range- 1,5- 2,8 mm
Mesh with - 20 - 70 mm
Ghcswgtue
Working with - max.2000mm
Capacity - 170 m2 / hour
With compaktor- Wafios AFK 1, and standard unit
Wire diameter range: 1,6 - 2,8 mm
Mesh width: 20 - 70 mm
Bk9jfc3gch
Working width: max. 2.000 mm
Output: max. 170 m²/Stunde
Type 41 67
Chain mortising for locks
Milling spindle for hinges and handles 16000 rpm
D9uu8iuz0
2 drilling-milling units
Working width up to 2100 mm
Working height up to 1000 mm
3 motors 1/1/1,1 kW
Hydraulic station
Made in Norway 1967 y.
Transport dimensions 2500x1500x1750mm
Weight 500 kg
MAKA chisel mortiser
Boiz2vxoas
- with vertical and horizontal holding
- over hanging control panel
- foot activation
Wafios model VDF80 – 3 meters max width
Maximum working width – 3 meters
Min / Max wire diameter range – 1,80 – 3,20
Tooling – 30x30 ; 50x50 and 60x60 mm
Capacity – 150 m2
Machine weight – approx. 4 tons
Bflte3cty
Rubber Pressure Roller Wheels for Edgebanders Edge Banding Machine
This rubber roller is one of the edge banding machine accessories. It is an edge conveyor roller, also called pressure roller. It is the important edgebander part, press the workpiece, work with conveyor chain pad to get edge banded.
Different edgebander manufacturers the edge band pressure wheel in different sizes and shapes.
Mainly there are smooth roller with bearing, gear roller with bearing, smooth roller with/ without cou...
Technical Details :
wire diameter range: 1,5 - 3,4 mm
mesh width: 20 - 100 mm
working width: 500 - 2.000 mm
Bbh8ltpcqu
output: 95 m²/ hour
The machine is renovated in 2018 !
The height of the mesh - 3000mm
Model - AF - 30
Mesh opening wire range - 20x20mm - 80x80mm
Min - max wire diam. - 1,80 -3,80 mm
9tj22a0qn
Capacity - 110 m2 /h
Weight - 3500kg
at the customer"s request the machine can be renewed !!!
Chain conveyors are driven by one or two chains. Unlike belt conveyors, chain conveyors are capable of transporting high temperature loads, heavy loads and other complex loads.
Jllczlm
Chain conveyors are characterized by high performance.
Driven by cylindrical-conical gear motor "Bonfiglioli" (Italy)
1) Type of belt - traction plate conveyor chain
2) The material of the rollers is alloyed high carbon steel.
3) Version: stationary, Z, L, I-shaped, modular
4) Chain tension mechanism: Mechanical...
Length: 10 m
Bwpv20gics
Between chains: 100 mm
Chain conveyor, board package spacers.
incl. guide rails 2 pieces approx. 3000 mm
Ksd0fjo
second hand
Condition: good
Make Sauer
Type ZKS 2033
Motor watt 2100 220 V.
saw
Cutting height 320 mm / 330 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
Technical characteristics
Mortising type: Spindle Tilting table
Bmdjwlsnrq
Pneumatic table feed Per side: 4 adjustable upper mortising heads 3 rear horizontal heads including 1 adjustable Number of mortising heads: 14 Table dimensions: 1000 x 200 mm Power and Motors
Overall dimensions
2 needle triple feed chainstitch machine with needle gauge 10 mm
Ow8gj
Technical characteristics
Mortising type: Chain Power and Motors
Motor: 2.5 CV Overall dimensions
Cvufodzk
Heavy triple feed machine for generell works in heavy Materiell
Brm2dqkmsf
Technical characteristics
Mortising type: Spindle
movement of the bit during pneumatic table feed
Btwpmuv
height and tilt adjustable table
pneumatic presser clamping parts
ideal carpenter, chaisier, cabinetmaker Power and Motors
Overall dimensions
1 Needle triple feed chainstitch machine with edge cutting
Ow8fl
Technical characteristics
Bmdjqdjxm2
machine à mortaiser oscillante
déplacement de la mèche pendant l’usinage à l’horizontal
table réglable hauteur et inclinable
presseur et avance de la table pneumatique
contact fin de course
idéal chaisier, ébénisterie
Power and Motors
Overall dimensions
Technical characteristics
Mortising type: Chisel Vertical course: 120 mm Frontal course: 130 mm Table dimensions: 1000 x 3000 mm Number of stops: 8 Power and Motors
Overall dimensions
Hxeskbgqy
Technical characteristics
Central chisel and side knives
Horizontal pneumatic cylinders
Bmdjmq2t3p
Horizontal stroke 90 mm
Tilting head
Pneumatic advance
Alu table 1200 mm Power and Motors
Power: 1.1 Kw Overall dimensions
Technical characteristics
loader and pneumatic pusher
belt feed
Microswitch stops on retractable rule for triggering the slotting cycle
control chisel mortiser and side scissors
Okcnkzfb
tilting head and depth stop Power and Motors
Overall dimensions
Technical characteristics
Mortising type: Chisel
3 controlled axes with milling / drilling head machine for slotting, drilling, milling such as shutters, hinges, locks, etc. workpiece capacity 150 x 110 x 2800 max depth 130 mm vertical stroke of the head 140 mm useful stroke chisel 3300 mm TF drilling / milling unit with depth axis electro-spindle with reverse 4.5 hp at 18000 rpm useful stroke 3000 mm Power and Motors
Overall dimensions
Offfh
Technical characteristics
Ctjvz2wq
vertical chisel mechanically adjustable oscillation manual descent vertical stroke 150 mm longitudinal stroke 260 mm transverse stroke 70 mm maximum machinable height 170 mm Maximum chassis height 740/1030 mm Power and Motors
Overall dimensions
Model: CNC Turning lathe / Teach-in
Manufacturer: L&W Machine Tools / Cyclone (Taiwan)
Type: FB-1860
Bcl2kd
Control: Fagor
Centerdistance: 1500mm
Swing over bed: 460mm
Center height: 230mm
Cross-slide height: 230mm
Spindle speed: 33-3100 rpm
Boring hole: 56mm
X-travel: 280mm
Z-travel: 1310mm
Used Chain mortising machine
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: The World's 10 biggest excavators
Sell now on Machineseeker! Over 220,000 inquiries per month
10 valuable tricks for buying used machines online
Sample sales contract for used machines in nine languages
Olympic Games: Machineseeker sponsors Team Germany
