Used Oscillating Mortiser for sale (893)

Condition: used, Year of construction: 2015, Numeric Control Startouch Control System Panel height mm. 60 Edges in PVC/Abs rolls mm. 3 Solid wood in strips mm. 6 Feed speed up to 11 m/min Working height adjustable electronically by C.N. Panel support guide with adjustment Side roller conveyor with idle wheels for panel support Anti-adhesive group Adjustable two-motor rectifier unit Hodpjtxtzkofx Adweu Reel holder plate Gluing group for EVA glue Edge pressure unit on straight profiles with adjustable pressure rollers Trimming unit with 2 motors with automatic inclination adjustment Gleaning unit electronically adjustable by C.N. Multifunction rounding unit (edner + rounder) adjustable by C.N. Edge scraper unit Glue scraper unit Oscillating brush group

Condition: used, Double edgebanding machine BIESSE STREAM SB2 10.5 usable as 1st and 2nd machine in a edgebanding line Numerical Control with Sintra Software Machine suitable for 1st + 2nd pass of the panel Opening of the mobile shoulder motorized by C.N. mm 3000 Panel height 60 mm Pvc/Abs mm 3 Continuously variable feed speed from C.N. (up to 40 m/min) Working height electronically adjustable by C.N. (up to 60 mm) Opening of the moving shoulder electronically adjustable by C.N. Hsdpfxju Rim Ho Adwju Motorized rubber belt with higher pressure Track with bearings with hidden pins - distance between PINS mm 500 Automatic system for supporting large panels Anti-adhesive group Part to be squared composed of (for each side): * Automatic timed anti-splinter group * Double shredder group * Two-motor grinding group Border part composed of (for each side): * Gluing unit for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. * 6-position reel magazine with automatic edge change by C.N. * End trimming unit with 2 motors with automatic inclination * Overlapping trimming group with 2 motors * Edge trimming group with 2 tilting motors electronically adjustable by C.N. * Multifunction rounding unit with 4 motors (cornering tool + rounding tool) with numerical control adjustment automatically * Toupie Group (with 2 motors on the fixed left side \ with 1 0-90° tilting motor on the mobile right side) * Electronically controlled edge scraper group by C.N. * Glue scraper group * Oscillating brush group * Phon group

Condition: excellent (used), CATALOGUE NUMBER 8037 TECHNICAL DATA - Max. width of the workpiece: 1100 mm - Max. height of the workpiece: 160 mm 2 units: 1) Metal, grooved roller for calibrating 2) Rubber, grooved roller + pneumatic sequential apron + metal roller - Motor power: 15 kW - Brake - Top: - Rubber roller, slip, split - Unit - Rubber roller, slip, split Hedpfx Ajzx Sm Dodwsu - Unit with apron - Rubber, slip, split output roller - Bottom: - 2 metal rollers, slip - Conveyor belt - 2 metal rollers, slip, output - Pneumatic belt oscillation with photocell - Electric table lifting - 2 feed speed types - Feed motor: 0.45 kW / 0.8 kW - Grinding thickness potentiometer - Working pressure: 8-10 bar - Diameter of dust extraction nozzle: 2 x 160 mm - Overall dimensions (L/W/H): 1900 x 1700 x 2000 mm - Weight: 1413 kg ADVANTAGES - Made in Italy, SCM brand - 2 units - Grinding thickness potentiometer - Pneumatic sequential apron - Not painted - DTR documentation - Used sander, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (the price may change in the event of significant exchange rate fluctuations)

Condition: new, functionality: fully functional, power: 18.2 kW (24.75 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 15 l, color: blue, operation weight: 1,725 kg, lifting power: 600 kg/m, lifting height: 3,380 mm, tire condition: 100 %, drive condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 0.23 m³, Year of construction: 2026, Equipment: all wheel drive, hydraulics, pallet forks, standard shovel, New machines are now available again! Currently in stock: 1x Rippa RL06 Standard Version farm loader 2x Rippa RL06 Telescopic Version farm loader 3x pallet fork as an attachment In addition, we always have all the appropriate filter elements for servicing the machine in stock. Test drives, inspections, collection, or delivery are possible at any time, while supplies last! Upon request, we will gladly send you the corresponding data sheet for the RL06 with all data and specifications directly in digital format. Both models feature all-wheel drive, oscillating axle, and articulated steering. Performance & Drive: Engine: Kubota D1105 (3-cylinder diesel, water-cooled) Power: 23.3 hp Emission standard: Stage V Tier 4f / EURO 5 Travel speed: 0 - 8 km/h Tires: Off-road tires for improved traction Drive system: Hengli hydraulic pump 96L/min with Deston BM5-315 hydraulic travel motor Work pump: Tianjin Walking // 42L/min Operating data & hydraulics: Diesel tank: 15L Hydraulic tank: 28L Operating weight: 1,620 kg Safe working load (rated load): 300 kg Maximum lifting capacity: 600 kg Maximum loading height: 3,380 mm Maximum unloading height: 2,060 mm Operation: One-hand multifunctional joystick for forward/reverse and lifting boom Dimensions, Standard Version without Telescopic Arm: Minimum length including bucket: 3600 mm Wheelbase: 1250 mm Hodpfx Adeyzbdtsweu Width including bucket: 1162 mm Height: 2270 mm Dump height, bucket: 2060 mm Height, top edge of bucket: 3380 mm Additional features of the Telescopic Version: + 750 mm telescopic cylinder as a lifting arm Height, bottom edge of bucket: 3000 mm Height, top edge of bucket: 4380 mm Please refer to the technical drawing in the image gallery! Equipment & Safety (included): Quick coupler for tool-free changing of attachments Standard earth bucket (0.23 m³) Operator protection roof with ROPS (rollover protection) and TOPS (falling object protection) Suspended seat with seat belt and side protection bars LED work lights and rotating beacon CE certification Prices & Model Versions: Standard version: €13,500.00 net plus 19% VAT (€16,065.00 gross) Version with telescopic arm: €15,500.00 net plus 19% VAT (€18,445.00 gross) You will receive a proper invoice with VAT shown. Warranty: 2-year manufacturer's warranty on spare parts. Pallet fork attachment for RL06 = €400.00 net plus 19% VAT (€476.00 gross) Delivery to the curb is possible, price depends on the distance. Logistics & Contact: Location: 76332 Bad Herrenalb

Condition: used, Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine Hodpecghhfjfx Adwsu -without: drive motors -HOMAG finishing unit: for cleaning agent application with buffing device for disposal of glue residue on PVC edges -with: oscillation -Swiveling -Number: 3x units available -Price: per piece -Dimensions: 400/160/H225 mm -Weight: 5.7 kg

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Hjdou R S Erjpfx Adwsu Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine -

Year of construction: 2012, condition: excellent (used), Used compact / small foot print Amada Lasmac LC – 1212 a IV NT flat bed 2d cnc laser cutting machine for sale: Fully serviced single bed very clean Amada LC – 1212 a IV NT cnc laser – Video at the bottom of this listing Specification: Most recent work carried out by Amada UK: Hsdpfoimwcbsx Adwou New turbo blower recently fitted New lenses and mirrors in August 2022 Fully serviced with Amada Uk Year / New 2012 Power: 2.5kw Machine Model: LC – 1212 a IV NT Travel method: X-Axis Material Travel, Y Axis: laser Beam Travel Axis Travel Distance X x Y x Z M: 1270 x 1270 x 300 Positioning Speed X x Y x Z m/min: 80 x 80 x 60 Cutting feed rare X x Y m/min: 0 – 20 Control Method: X-, Y- and Z-axes (simultaneously controlled) + B – axis Max. sheet size X x Y x Zmm: 2540 x 1270 x 300 Repeatable positioning accuracy mm: +0.005 Oscillator model: AF2000E-LU2.5 AF4000E Oscillation Process: fast axial flow, high frequency discharge excitation Ideal if you are looking to bring laser cutting in house and space is a premium Delivery and installation can be arranged AMADA LASMAC LC1212 MK IV 2.5 KW NT LASER CUTTING MACHINE MACHINE CAPACITY 1270 X 1270 2540 WITH ONE REPOSITION

Condition: used, Globoid gear, indexing, oscillator indexer, index gear -Manufacturer: Manifold, gearbox from rotary indexing table type RTU 800 8-150 -Translation: i = 1:8 45° -Dimensions: see photos -Quantity: 2x gears available -Price per piece -Dimensions: 470/375/H500 mm -Weight: 172 kg/pc. Hsdsrub H Tepfx Adwou

Condition: used, Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.415.2 Links -Quantity: 5x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.3 kg/pc. Hsdpsqqpi Ssfx Adwou

Condition: excellent (used), Cold room lock, cold storage lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock, unused, original packaging -Type: 3.16.416.2 Links -Number: 8x door locks available -Price: per piece Hodpfx Aoqqpkdodweu -Cardboard dimensions: 260/150/H40 mm -Weight: 1.1 kg/pc.

Condition: excellent (used), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: AE00003516, grinding width: 1,370 mm, overall weight: 1,800 kg, grinding height: 170 mm, workpiece height (max.): 170 mm, workpiece width (max.): 1,350 mm, - Wide-belt sanding machine DMC SD 70 RCS 135 - DMC SD 70 model, RCS 135 version First "R" unit with roller and second "CS" combination unit with roller/sanding pad - Working width mm 1,350 Min./Max. working height mm 4-170 Sanding belt dimensions mm 1,370x2,620 Main motor power kW (HP) 11 (15) Feed rate m/min 4.5/9 Hsdpfozydafsx Adwju - 160/85 rubber-coated calibrating roller, diameter 160 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual adjustment of the working height - Motor power, 1 unit: 11 kW (15 HP) - Electronic ammeter for the main motor to display current draw - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at the infeed before the first unit - Rubber feed carpet, 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering

Condition: new, functionality: fully functional, mileage: 0 km, color: red, empty load weight: 2,050 kg, maximum load weight: 650 kg, lifting height: 3,330 mm, digging bucket width: 1,160 mm, Year of construction: 2025, Equipment: pallet forks, standard shovel, TECHNICAL DATA: Model: VOLT 600 Payload (kg): 650 Unladen weight (kg): 2050 Bucket volume (m³): 0.25 Maximum steering angle: ±45° Turning radius (mm): 2050 Rear axle oscillation angle: 19° Full cycle time (s): 8 Operating time (h): 6 Speed (km/h): Slow: 10 km/h, Fast: 20 km/h Dumping height (mm): 2170 Lifting height (mm): 3330 Dimensions (mm): 3810 × 1260 × 2270 Dumping reach (mm): 405 Bucket width (mm): 1160 Wheelbase (mm): 1380 Track width (mm): 890 Ground clearance (mm): 200 BATTERY: Model: 3-EVF-200 Type: Maintenance-free lead-acid battery Quantity: 12 Capacity (kW): 14.4 Nominal voltage (V): 72 Charging time (h): 8 System voltage (V): 12 Electrical system: AC MOTOR: Voltage (V): 72 Power (kW): 5 Displacement (ml/r): 23 Nominal speed (rpm): Slow: 800 rpm Fast: 2200 rpm System pressure (MPa): 16 Hydraulic system: Steering type: Fully hydraulic steering System pressure (MPa): 14 Steering pump: 5–125 Cylinder size (mm): 63 × 190 mm Number of cylinders: 1 DRIVE: System: AC Voltage (V): 72 Power (kW): 4 × 2 Number of motors: 2 Tyres: 26×12.00–12 Tyre pressure (MPa): 0.25 PRICE: €14,500 net €17,255 gross KINGWAY DEUTSCHLAND is the exclusive stationary distributor of the Kingway brand in Germany. Here you can inspect and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a vast selection of machines in stock, with around 100 units available at any given time. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and provide our customers with access to all spare parts as well as a mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 Hsdsw Ufplepfx Adweu 84098 Hohenthann

Condition: excellent (used), Year of construction: 1995, MACHINE CONNECTED, WORKING IN GOOD CONDITION, POSSIBILITY OF TESTING - INCLUDED IN THE TOOL SET The Weinig UC 10 combined mortise, tenon and rebate machine for the flexible production of various windows, elements and doors without changing tools. Frame-by-frame production, serial or one-piece. - Units: 1. Cross cut saw: ø 40 mm, 3 kW 2nd tenoning and slotting spindle: clamping length: 320 mm, ø 50 mm, stroke: 8 x 80 mm, 11 kW 3rd profiling spindle 1: clamping length: 320 mm, ø 50 mm, stroke: 4 x 80 mm, 11 kW 4th profiling unit, horizontal from above, 3 kW, ø 40 mm, clamp length: 40 mm 5th profiling spindle 2: clamping length: 320 mm, ø 50 mm, stroke: 4 x 80 mm, 11 kW 6th profiling unit, vertical right, 3 kW, ø 40 mm, clamp length: 160 mm - Studio window unit - Slat conveyor with conveyor belt for automatic return transport to the operator Hodpfx Adjlc N N Ujwju - NC axis: feed height adjustment - Milling package THE MACHINE HAS 3 SETS OF TOOLS FOR WOODEN WINDOWS - PROFILES 68/78/92

Condition: used, power: 85 kW (115.57 HP), overall weight: 6,500 kg, operation weight: 6,500 kg, maximum load weight: 6 kg, Year of construction: 2024, operating hours: 682 h, maximum speed: 40 km/h, Operating hours: 682, Initial registration: 07.11.2024. Standard equipment / technical data: Maximum load capacity 3,300 kg, maximum lifting height 6,600 mm, maximum reach 3,500 mm, length to carriage 4,310 mm, width 2,100 mm, height 2,120 mm, total weight with load forks 6,500 kg, total weight without load forks 6,330 kg. Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled, power: 85 kW (115 hp), 2,300 rpm, Stage V, diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR). Hydrostatic drive: Pump electronically controlled with variable displacement, motor: variable motor, EPD TOP including optional automatic speed increase. Mineral hydraulic oil HVI 46. Transmission: 2 gears, electro-hydraulically controlled, Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h. Cabin: Enclosed cabin, split door, 360-degree all-round visibility, GRAMMER air-suspended seat with safety lap belt, ROPS/FOPS approved, heating, front, roof and rear window wipers, sun visor, 4x1 joystick, electronic with capacitive release including direction of travel switch. Telescopic boom: 2-piece with electronic end-of-stroke damping (Soft Stop). Carriage: quick-change system, type "ZM2", hydraulically controlled from the cabin. Steering: hydraulic steering, 3 steering modes: all-wheel drive, front-wheel drive, crab steering. Drive: permanent all-wheel drive. Axles: front axle fixed, rear axle oscillating. Braking system: servo-assisted disc brakes on all four drive axles, automatically acting parking brake when the engine is stopped. Hydraulic system: pump with variable displacement, type "LOAD SENSING", flow rate work hydraulics: 125 l/min, flow rate hydraulic fan: 46 l/min, total flow rate: 171 l/min, working pressure: 210 bar, flow-sharing control block. Electrical system: 12 V, battery with 100 Ah, alternator 120A, stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off. Tires: 400/70-20. Standard equipment: servo brake, hydraulic oil cooler, rear plate for mounting a trailer hitch, hydraulic reversing fan, radio preparation, work lights on the cabin (2 front, 2 rear), V2001 preparation for additional function on the boom head, 2 hydraulic connections on the boom head, load protection grid on the carriage, lighting for road travel, automatic battery disconnect switch, electrical connection cable in the boom, acoustic signal when reversing, boom cylinder support for securing. Optional equipment: EU approval as a tractor / agricultural tractor 40 km/h including trailer hitch, height adjustable, self-locking, 30/32 mm pin, including connection for trailer lighting, air conditioning, vibration damping on the boom (B.S.S.), LED rotating beacon on the cabin roof (approval is the customer's responsibility!), LED work lights on the cabin (2 front, 2 rear) instead of the standard halogen spotlights, 2 work lights at the end of the first arm (basic arm), rear hydraulic connection with separate control. Hodpfx Aszdmtpodwju

Year of construction: 2008, condition: used, functionality: fully functional, FREWITT MF-LAB – PHARMACEUTICAL LABORATORY MILL / GRANULATOR For sale: FREWITT MF-LAB laboratory mill / oscillating sieve mill, used in pharmaceutical applications, in excellent used condition. The machine is supplied with an extensive package of 13 original sieve inserts in different sizes, as well as comprehensive original documentation and qualification documentation. TECHNICAL DATA Manufacturer: FREWITT SA, Switzerland Model: MF-LAB Year: 2008 Serial No.: 6180310817 Electrical supply: 400 V / 50 Hz Current: 16 A Design: ATEX APPLICATION The MF-LAB is designed for laboratory and pharmaceutical applications and can be used for gentle size reduction, calibration, and sieving of dry or moist products. Particularly suitable for: - Pharmaceutical R&D - Laboratory and pilot applications - Granule calibration - De-agglomeration Hsdezxdgijpfx Adwju - Sizing and sieving - Heat-sensitive products EXTENSIVE SIEVE PACKAGE A major advantage of this machine is the large number of included sieve inserts. Included are 13 marked sieve inserts in 9 different designs/sizes. All sieves shown in the photographs are included in the scope of supply. DOCUMENTATION Comprehensive original documentation and qualification documentation are available with the machine. CONDITION Excellent, very clean used condition from pharmaceutical use. Inspection and demonstration can be arranged by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged upon request. CYCRON GmbH Switzerland Invoice will be issued by CYCRON GmbH. Subject to prior sale and errors.

Condition: new, functionality: fully functional, overall weight: 15,000 kg, Year of construction: 2026, Roll-off container with a drive-over oscillating flap – 11 m³ usable volume Price: €5,200 net / €6,188 gross Details: Internal dimensions (approx.): 6.5 x 2.35 x 0.75 m Usable volume: approx. 11 m³ Paint finish: RAL 7016 (anthracite gray) Material: Base pan made of 5 mm steel Side walls made of 3 mm steel Transition between base and side wall is flanged Spar spacing: 750 mm Hsdpfx Adozv U N Ajwou Spar profile: U 80 x 50 mm End profile: sturdy round tube, Ø 80 mm Mounting brackets for hook lift systems according to DIN 30722-1 (up to 15,000 kg) with rear-mounted external rollers Subframe made of INP 180, external rollers are greaseable and replaceable Mounting bracket: Ø 50 mm, hook height 1,570 mm Double-leaf door with Dutch door latch and lateral safety central locking according to UVV Door latch with container door opening aid All-round tarpaulin and net hooks Primed once on the inside, primed and painted on the outside in RAL

Condition: used, functionality: fully functional, machine/vehicle number: 36516, mileage: 99,900 km, power: 265 kW (360.30 HP), first registration: 05/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6d, suspension: steel-air, loading space volume: 27 m³, Equipment: ABS, air conditioning, airbag, cruise control, power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Lrsbn Ed Iezktyvs E Ior Hsdpfx Adezwfkaswsu Further comparable vehicles available upon request. ABS, ESP, ASR, lane keeping assist, driver attention assist, cruise control, air suspension front axle, air suspension rear axle, lifting and lowering function, steered and load-relieving trailing axle, axle load measuring device, hill start assist, fog lights, daytime running lights, work lights, radio, digital tachograph, hill start assist, 290 L diesel tank, 60 L AdBlue tank 2 seats, multifunction steering wheel, central locking, sunroof, air conditioning, waste heat recovery, electric windows, electrically adjustable and heated exterior mirrors, air-suspended driver's seat, radio Side loader NTM OM-SBH-420-DK-RT-FD 27 m³ with comb-type container attachment, oscillating compactor, compaction chamber volume: 3.6 m³, compaction ratio 1:4, lifter lifting capacity: approx. 420 kg, reach: approx. 2,300 mm incl. hydraulic side adjustment, close-up for confined spaces, dual comb-type container attachment for 2 MGB DIN30740/EN840 80-240 liter DIN30700/EN840 with folding or sliding lid and comb strip, container stop for sliding and folding lid containers up to 1,100 L. Stowage volume: approx. 27 m³. Collection container is tilted for emptying by means of a hydraulic cylinder, camera in the area of the oscillating compactor, reversing camera, LED work lights.

Condition: used, Year of construction: 1996, functionality: fully functional, Felder FS900K edge sander Sanding belt width: 150 mm Tilting worktable at an angle of 45 degrees Sanding belt oscillation Hjdpfx Adszxw Efswsu Motor power: 3 kW Year of manufacture: 1996 Machine dimensions: 147x61x121cm (H)

Condition: used, functionality: fully functional, power: 24 kW (32.63 HP), color: orange, operation weight: 2,570 kg, Year of construction: 2019, operating hours: 1,990 h, HAMM HD12i VO VIO tandem roller with oscillation Year of manufacture 2019 Hodpezzpagjfx Adwsu 1,990 operating hours 2,570 - 3,470 kg 24 kW Kubota engine Edge cutter wheel New model

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 950 mm, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, - Italian manufacture - year of manufacture: 2007 Hsdpfsxdxfqox Adwou - combination sanding shoe TECHNICAL SPECIFICATIONS: - sanding width: 950 mm - sanding height: 4–170 mm - motor power: 11 kW - 1st unit: steel drum with pneumatic engagement - drum diameter: 110 mm - 2nd unit: combination sanding shoe - pneumatic engagement for rubber drum: 78 Shore - shoe with pneumatic adjustment - pneumatic oscillation - air blast for belts - electric height adjustment - two belt speeds: 8.3 m/s and 16 m/s - electronic sanding height positioning - continuously variable feed speed: 4–20 m/min - minimum material length: 500 mm - extraction nozzle diameter: 2 x 140 mm - machine dimensions (L/W/H): 150 x 180 x 210 cm - weight: ~ 1010 kg

Condition: new, working width: 125,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mower / incl. floating linkage / NEW unit / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Total width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg - Mulches grass and light brush up to 7 cm Ø - For excavators from 5 to 15 tonnes - Universal mounting interface for installing various adapter plates - S420: double-walled housing made of high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low design - Indirect V-belt drive with 4 V-belts - Drive designed for hydraulic motor depending on the carrier’s hydraulic flow - 4D ROLLER: reinforced support roller, 152 mm in diameter, with double-cone roller bearings, height-adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front guard with chains - Rear guard made of rubber - Color: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pieces, part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow in l/min (min-max): 55 – 150 OPT 099 Floating mounting (parallelogram linkage) OPT 555 Oscillating adapter Three hydraulic lines are required: pressure, return, and drain/oil leakage. Option: MS08 adapter plate incl. bolts and installation = €750.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse offers a very large selection of various Seppi M. products, all available immediately! Mr. Herden (phone) will be happy to assist you. We can also provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telescopic handlers - DMS Hodpfx Ajyix Hajdwju - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. product range! Errors and prior sale excepted. = Further information = Please contact Marius Herden for more information.

Condition: good (used), Year of construction: 1995, For sale is a used Langzauner LZK 3/2 edge grinding machine with a grinding belt length of 2600 mm. The machine is in good condition and has been inspected by our qualified personnel. Technical data: - Table size 980 x 340 mm - Grinding belt length 2600 x 150 mm - With oscillation - Incl. veneer grinding attachment Hsdjz Anxdepfx Adwou - Incl. feed mechanism - Motor power 2.4 kW / 3.3 HP - Year of manufacture 1995 The machine is located in A-5431 Kuchl and can be inspected during our opening hours. Related terms: grinding machine, edge grinding machine, edges, KSM, KSM 260 Reference: R-F13KS

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 09103, COMANDULLI Model EDILUX 7+4 DX • Belt running direction: RIGHT to LEFT, year of manufacture 2003 #09103 • 7 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 2 pneumatic lower supports / 2 upper supports • Water groove milling support, manual height and side adjustment • Coating support, manual height adjustment • Separate control panel on a swivel arm • Table extension console • Water trough • Machine footprint approx.: 440 x 180 cm • Infeed area approx.: 190 x 60 cm Hodpfx Adszz Nfcewju • Outfeed area approx.: 150 x 60 cm Price: • EXW at the machine location, plus VAT, subject to prior sale, no tools included, attachments & accessories in the pictures are not included with the machine/scope of supply. Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of shipping readiness Warranty • Machine sold “as is”, excluding any warranty claims Inspection possibility • at the operating site near Cottbus Availability • after delivery of the new machine in December 2026 / January 2027

Condition: excellent (used), functionality: fully functional, working width 950 mm calibrating unit with metal roller combination unit with rubber roller and automatically adjusted sanding pad star-delta start Hjdpfx Asz D Ackedwou pneumatic oscillation controlled by photocells two feed speeds of the conveyor motor power 7.5 kW year of manufacture 2000 power supply 400V weight 976 kg

Condition: new, Technical data: Hjdpfx Aehtuvredwsu Working width mm 1,350 Min./max. working height mm 4 - 170 Sanding belt width/length mm 1,370/2,620 Main motor power kW 18.5 with inverter Feed speed, variable m/min 3.5 - 18 Working units: 1. Unit: "RA" diagonally ribbed contact roller, Sh 86, diameter 160 mm 2. Unit: Combi: rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad "MESAR" with 24 segments Version C: - Elastic electronic segmented sanding pad "MESAR" complete with: - Pneumatic cylinder (on/off) for the automatic raising and lowering of the sanding roller/sanding pad unit - Activation of the sectors via the electronic control system, which synchronizes their engagement with the feed speed and controls the number based on the workpiece geometry, and enables the selection of more or fewer sectors to the left and right of the workpiece. Version 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at the infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with electric fan 4 kW (5.5 hp) integrated into the machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4" display with 'eye S software integration' ATTENTION: IMAGES are EXAMPLE IMAGES of a SIMILAR SD70!