Used Slot Mortiser for sale (3,070)

Condition: excellent (used), Year of construction: 2014, Universally applicable frame and elongated hole drilling machine Specifically designed for window construction and universal use with pneumatic height adjustment. Double-hole drilling on two levels in a single clamping operation. Motor power: 1.5 kW Motor start with a practical handle switch. Equipped with a two-jaw chuck, 1–20 mm, by Röhm. Pneumatic adjustment of the machining height, allowing dowel holes to be drilled on two levels without re-positioning. The desired drilling heights can be set for each drilling level using a digital counter. Switching between levels is then performed pneumatically from the front. Njdpe Aa A Eqsfx Akielh Cross adjustment: 430 mm, stepless or in a 12 mm grid. Maximum height adjustment: approximately 100 mm above table height. Drilling stroke: approximately 150 mm. 2 pneumatic workpiece clamps. Grid rail for quick lateral adjustment in a 12 mm grid. Stop for length adjustment when milling elongated holes. 2 swiveling workpiece supports. Special stop system, approximately 3.1 m long, with swiveling stops. Removable special stop with centering via a lever mechanism for different ladder rung widths, etc. Dust extraction funnel. Center stop. Side stop. Drill head mount. Laser. Operating manual. CE marking. Few small areas where paint has been touched up. Almost new condition, see original photos. Dimensions: approximately 1500 x 900 x 1400 mm (L x W x H), weight: 300 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this seller."

Condition: used, Year of construction: 2023, Used Machine Year of Manufacture: 2023 Condition: Like new; only a few drill holes have been made Features and Technical Specifications: - Spindle speed: 3,000 rpm - Drilling width: 240 mm - Max. drilling depth at 90°: 180 mm - Drill head height adjustment: 160 mm - Tool clamping range: 0–20 mm - Work table rotation: ±60° - Work table length: 565 mm - Work table width: 315 mm - Exhaust port diameter: 90 mm - Output power: 2.2 kW - Supply voltage: 400 V - Power frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Nlsdpfx Aozk Ni Tekieh Weight: 260 kg Availability: Available shortly Location: Röllbach

Condition: used, Year of construction: 1993, Used Machine Year of Manufacture: 1993 Features and Technical Specifications: - 2-jaw drill chuck for shanks up to 20 mm in diameter - Pneumatic position adjustment - On 2 levels: 0–100 mm - Max. drilling depth: 150 mm - Precision indexing rail, 12 mm - Center locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor: 1.5 kW - Speed: 2,800 rpm Nledpjz I Uffsfx Akijh - Lowerable slotted hole drilling unit with 2 program cams - Machine weight: approx. 310 kg - Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop)

Condition: used, Year of construction: 2018, Used Machine Year of Manufacture: 2018 Features and Technical Specifications: - Drilling depth adjustment via a maintenance-free linear guide - Efficient and economical operation thanks to the quick-lift system; no more laborious cranking - Smooth-running, infinitely adjustable drilling unit - Height adjustment with fine tuning and a gas spring cylinder for weight compensation - Cross-travel and height adjustment with scales and adjustable stops - Vibration-free operation thanks to a robust steel construction - Drilling depth adjustable via a scale and stop - Drill head height adjustment can be fully utilized for vertical slotting Nledpfozk Nlnjx Akieh - Large-dimensioned gray cast iron table with a ground surface - Motor power: 1.5 / 1.9 kW - Voltage: 400 V - Speed: 1,400 / 2,850 rpm - Westcott drill chuck: 0–20 mm - Maximum drilling depth: 220 mm - Drilling width: 340 mm - Height adjustment: 145 mm - Swiveling drill head: -60° to 60° - Drill table size: 595 × 315 mm - Table extension: 2 × 200 × 220 mm - Drilling table height: 830 mm - Dimensions: 1,200 × 1,050 × 1,300 mm - Weight: approx. 240 kg

Condition: used, used, good condition, low operating hours, with accessories with pneumatic lift for drilling on two levels Make: Ganner Model: Junior Motor: 1.5 kW Two-lever operation Table size 850 x 360 mm Drill chuck 20 mm Dowel drilling device with 24 positions Nodsythcrspfx Akijlh Workpiece stop Central stop Pneumatic lift Pneumatic workpiece clamps, 2 pcs Space requirement approx. 300 x 1000 x 1300 mm Weight approx. 270 kg Storage location: 97447 Gerolzhofen, free loading, unpacked Delivery in current condition as inspected, function tested without overhaul, without guarantee or warranty

Condition: used, Year of construction: 2002, Second-hand machine Year of manufacture: 2002 Table size 580 x 280 mm Drilling table height: 800 mm Drilling depth: 150 mm Drilling length 225 mm with Wescott drill chuck 0–20 mm Nodpfozk Nupox Akijlh Height adjustment: 120 mm Swivel range of drilling unit: 2 x 45° with 2 eccentric clamps with one-hand operation with dowel drilling device with dial gauge in the handwheel with digital display with 2 speeds: 1,400 and 2,800 rpm with travel mechanism LxWxH 850x1000x1050 mm Weight approx. 240 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 1984, used, in good condition Nledpfxjy Apfns Akieh Cleaned Function-tested Test run Manufacturer: Kölle Model: L2 Year of manufacture: 1984 Machine no.: 1788 Motor: 1.5 kW 2-lever operation Chuck runout max. 8/100 mm Table size: 520 x 290 mm Drill chuck: 20 mm Dowel drilling unit with 4 stops: 16, 22, 25, 32 mm Workpiece stop Digital height adjustment display Required space approx. 1000 x 1200 x 1300 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition as inspected, function-tested without refurbishment, without warranty or guarantee

Condition: used, Year of construction: 1988, Slot drilling machine Manufacturer: SCM Type: AS 16 Year of manufacture: approx. 1988 Nlsdpfx Akezuynueish

Condition: used, functionality: fully functional, input voltage: 400 V, BÄUERLE horizontal boring machine, very solid construction, 3D table, on chassis, drill bit set included, 400V 16A connection with fuse. Nljdpfx Akjyz U R Tsieh

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1160x750x1080 mm Nsdpfjvz Hmbex Akijlh Weight 260 kg Total power requirement 2,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x1150x1250 mm Weight 550 kg Nlodovz Evnepfx Akish Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 720x900x1160 mm Weight 120 kg Total power requirement 2,2 kw Nlodpevz Hk Tofx Akijh

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x740x1260 mm Weight 240 kg Total power requirement 2,4 kw Nledpfx Akjvz Hm Isieh

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation no. A3002551 piece eccentric pusher with column andclamping cross no. A250055 Njdovwfr Iepfx Akiolh

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1200x1200 mm Weight 700 kg Total power requirement 1,9 kw Nodjv A Hydopfx Akislh

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation No. A3002551 piece 4-wheeled trolley with 2 swivel castorsand 2 brakes on own frameNo. A3504151 piece eccentric pusher with column andclamping cross No. A250055 Nledpfxovwf H Eo Akish

Condition: new, withquick stroke system, rotatable drill head,operating instructionsdrilling width 240 mmdrilling depth 180 mmdrilling stroke 140 mmmotor power 2.2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricmotor rotation angle 65° right/leftweight 268 kgarticle no.: 320010A 2500702-speed motor, 1400/2800 rpminstead of 2.2 kw, (LLB/BS/BSK)A 250055Eccentric presser with column and clamping crossfor LLB 200/300/320A 3504154-wheel chassis for LLB 300/320/400with 2 swivel castors and 2 brakes onown wheels 2 brakes onown frameA 25012890° plug-in stop for LLB 200A lling grid system SH LLB 300 D/320 Dwith 4 rows of holes 16, 20, 22, 25 mm,Bowden cable operation Njdpfjvwfrzox Akiolh

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames Njdpfx Aexdttpskijlh 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: new, With 2 eccentric clamps and motor protection. Adjustable end stops for transversal and longitudinal operations. Drilling unit tiltable on both sides Westcott-drill chuck mm with protective cover Smooth running height adjustment of drilling unit by hand wheel Easy and comfortable one hand operation. Stop bar for series usable on both sides. With pin drilling device and mitre fence Technical data: Pin point distances 16, 22, 25 und 32 mm Table dimensions 600 x 320 mm Drilling depth 205 mm Drilling length 250 mm Vertical table stroke 165 mm Tilting of drilling unit on both sides 45° Nedpfxjx H Ucms Akijlh Motor speed 2840 rpm Engine power 3 kW S6 (2,2 Kw S1) Weight 180 kg

Condition: like new (used), DISPLAY MODEL For sale is an as-new JET Mortising Machine 719-AS equipped with a powerful motor for demanding applications. The display model is in its original condition, so you benefit from the full warranty. Technical specifications - Motor: 230 V / 1,300 W - Spindle speed: 1,450 rpm - Max. chisel size (hard/softwood): 19 x 19 / 25 x 25 mm - Keyless drill chuck: 13 mm - Max. workpiece height: 195 mm - Max. chisel stroke: 200 mm - Table travel (longitudinal/cross): 400 / 100 mm - Table tilt: 0 – 35° - Table dimensions: 520 x 180 mm - Workpiece stop: 520 x 90 mm - Max. distance from chisel center to stop: 100 mm - Machine dimensions: 650 x 500 x 1760 mm - Weight: 125 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight forwarder: Nledjyb Sbnepfx Akijh Austria: €75.00 incl. VAT Germany: €95.00 incl. VAT South Tyrol: €125.00 incl. VAT Related terms: JET 719-AS, mortising machine, slot mortising, wood jointing, 230 V drive, 1300W power, professional tool, workshop equipment, precision engineering, woodworking Reference: R-A0117

Condition: good (used), Slot Mortising Machine L2 - Year of manufacture: 1977 - Weight approx. 220 kg - Overall dimensions approx. 1,120 x 880 x 1,120 mm (W x D x H) - Table height approx. 980 mm - Table size approx. 820 x 350 mm - Power consumption 3.2 A / 3-phase power connection Njdpfx Asywnuwokielh - Drilling depth approx. 150 mm - Drilling length approx. 200 mm - Max. drilling height approx. 120 mm - Drill chuck approx. 3–20 mm

Condition: reconditioned (used), Year of construction: 1998, machine/vehicle number: M000039046, drilling depth: 180 mm, height adjustment type: mechanical, table width: 315 mm, table length: 565 mm, drill chuck size: 20 mm, overall weight: 260 kg, rotational speed (max.): 2,840 rpm, power: 1.5 kW (2.04 HP), working height: 850 mm, MAKA Slot Mortising Machine LB-1 Sturdy, heavy cast iron work tables and supports, combined with a large machine base, ensure flawless and smooth operation. Height and depth adjustments are monitored via graduated scales, while the ultra-smooth single-lever adjustment on ball guides allows for fatigue-free working. Nlodpfoyc Rz Aex Akish Technical data: Table size: 565 x 315 mm Work table height: 850 mm Longitudinal travel of drill head: 240 mm Max. drilling depth: 180 mm Vertical adjustment of drill head: 140/160 mm Two-jaw drill chuck: 0-20 mm Spindle speed: 2,850 rpm Motor power: 1.5 kW Extraction nozzle diameter: 90 mm Net weight: 60 kg Sound level according to DIN 45635/1600: 66.9 dB The machine is in excellent technical and visual condition and has been inspected in our workshop. It features a dowel hole drilling device for 16-22-25-32 mm and a precision mitre stop 45°- 0 -45°. Shipping available at additional cost. We only ship within the EU. No shipping outside the EU.

Condition: used, Year of construction: 1999, machine/vehicle number: 228, SECOND-HAND OSCILLATING HF MULTIPLE MORTISER BACCI MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - RPM Spindles (selectable motor by motor) RPM 6000/12000 - Max inclinations of slots > 20° - Inclinations from and towards the outside -7° + 30° - Max C/C distance of spindles mm. 1280 - SN 228 - CE rules (year 1999) Nlsdpfxswrd A Tj Akieh

Condition: new, Year of construction: 2026, CORMAK LBM290 PRO Horizontal Wood Boring Machine – Precision and Versatility for Professional Woodworking The CORMAK LBM290 PRO is a precise and multifunctional horizontal wood boring machine designed for intensive operation in woodworking shops, furniture production facilities, and manufacturing plants. Thanks to its stable construction and extensive standard equipment, the machine ensures maximum efficiency and repeatability of drilling operations, even in the most demanding projects. Main advantages of the machine Mortising attachment – enables precise production of rectangular holes and slots. Double-sided tilting of the working unit – allows drilling at any angle within a range of 0–45°. Four-position spindle head – enables quick changing of drill diameters: 16, 20, 22, and 25 mm. Two end stops – ensure repeatability and accuracy during series production. Left/right spindle rotation – increases drilling versatility and allows adaptation to different types of tools. Easy one-hand operation – an ergonomic lever provides fast and comfortable control of the drilling cycle. Construction and technology The CORMAK LBM290 PRO horizontal boring machine is built on a heavy-duty grey cast iron base, which effectively absorbs vibrations and minimizes machining errors. The integrated extendable worktable (600 × 300 mm) allows convenient processing of larger workpieces. Drilling height and width adjustments are carried out using precise adjustment knobs and guide systems, ensuring smooth and accurate movement of the working unit. The machine is equipped with a professional Westcott drill chuck (0–20 mm) and a complete set of holders for square chisels. Precision and work efficiency The machine reaches spindle speeds of 1400/2800 rpm, while the maximum drilling depth is 155 mm. A stable and quiet 4.2 kW (S6) motor provides consistent performance even during long operating cycles. Horizontal wood boring machines such as the LBM290 PRO are designed for continuous industrial operation – both for individual production and large series of drilling operations for dowels, hinges, and frame joints. Applications The CORMAK LBM290 PRO horizontal boring machine is designed for: professional woodworking and furniture production facilities, manufacturers of furniture fronts and frame components, workshops specializing in furniture restoration, woodworking technical training centers. Standard equipment Mortising attachment + 1 square chisel 9.5 mm Four-position spindle head 16/20/22/25 mm Westcott drill chuck 0–20 mm Extendable and widened worktable 2 eccentric clamps Njdpfx Ajvuq Hljkielh Angle stop with measuring scale 4 holders for hollow chisels (shank sizes 19/20/28/30 mm) Base with tool storage compartment Left/right spindle rotation Technical specifications Parameter Value Table dimensions 570 × 300 mm Table extension 600 × 300 mm Drilling table height 870 mm Drilling depth 155 mm Drilling width adjustment 300 mm Height adjustment 160 mm Spindle speed 1400 / 2800 rpm Motor power (S6) 4.2 kW Power supply 400 V Two-jaw chuck 0–20 mm Dimensions 570 × 850 × 1340 mm Weight 140 kg

Condition: new, Centauro BETA 3 Axis CNC Swing Chisel Mortiser A new fully programmable 3 axis horizontal CNC swing chisel mortiser suitable for general joinery and furniture production. By a combination of automatic movement of the mortisting head in the x axis and an automatic gripper that positions the timber no manual movement or handling of the component is required other than loading and positioning the timber against the pneumatic reference stop and then unloading when the mortising cycle is finished.The complete movement, clamping and mortising cycle is fully automatic. X,Y and Z axis movements are all via re-circulating ball and screw drives and using linear slideways to give maximum positioning accuracy. Thanks to the programmable Z axis it is possible to produce off line mortises, double mortises or produce thicker mortise slots with the same chisel. Programming is very simple thanks to the 'user friendly' graphic touch screen controller were programs can be memorised and stored under a number or specific name up to 8 characters. The swing chisel cutter itself produces a very clean mortise slot and if required for deep mortises upto 3 depths of cut can be programmed to give a 'woodpecker' type cutting operation. Other programming options include working off either the face of the timber or the thickness and the possibility to produce mirror image components (left/right hand) in one program. On request the machine can be equipped with a separate dedicated programmable hollow chisel head for producing the small mortise holes for glazing bars. Alternatively a horizontal milling head can be specified that can be used for hinge recessing, slotting for louvre doors etc etc. Nledpeb Tmpqsfx Akish X axis stroke 1100mm. Y axis stroke 250mm. Max. depth of cut 120mm (depending on chisel size) Z axis stroke 100mm Max. workpiece height of 120mm. All movements on re-circulating ball and screw drive with brushless motor Max. workpiece width 200mm (wider on request). Max. swing chisel thickness 20mm. Min . slot length 25mm approx (with swing chisel) Min. slot thickness 6mm. 3 vertical pneumatic clamps. 3 horizontal pneumatic clamps. 4 hp main motor. 'Power 1000' touch screen graphic controller with 99 programs each with 50 lines. USB key facility. Programmable speed for cutting depth. Anti splinter guards with air blowers and dust extraction points.1 x 80mm 1 x 60mm dia. Working table dimensions 1210mm x 215mm Installed power 3.6kw. (std machine) Air supply 6 bar / 470 l/min consumption.