Used Optimum S 130 Gh for sale (127)

Condition: excellent (used), Year of construction: 2003, cutting diameter 128 mm Iodpfx Aaexbh Hfocoih saw band length / mm table height / mm

Condition: as good as new (ex-display), Year of construction: 2025, OPTIsaw 131 GH - Metal band saw ideal for light sawing work. Mitre sawing from -45° to +60° via swivelling saw bow Iedjb S Uzrjpfx Aacsih Metal band saw with low noise operation 3 saw band speeds Ball bearing mounted 3-point saw band guide Three switchable saw band speeds Quick hold of the workpiece due to quick clamping vice Standard with high quality bi-metal saw band Base plate and saw bow made of grey cast iron Material stop emergency stop impact switch, motor protection switch Easy to read scale for angle adjustment Scope of delivery: Material stop Bi-metal saw band (10-14 ZpZ) Machine base Technical data Cutting range 0° Round Ø 128 mm Cutting range 0° rectangle 100 x 150 mm Cutting range 45° round Ø 94 mm Cutting range 45° rectangle 94 x 78 mm Cutting range 60° round Ø 56 mm Cutting range 60° rectangle 56 x 56 mm Lifting the saw-bar manually Feed infinitely variable saw band speeds 22/31/55 m/min. Saw band dimensions 1638 x 13 x 0.65 mm Motor power 1,1 kW 230 V ~50 Hz Dimensions Length 1000 mm Width 530 mm Height lower end position saw bow 1060 mm upper end position saw bow 1320 mm Net weight Location: Ex warehouse 54634 Bitburg

Year of construction: 2022, condition: new, Motor power: 1,1kW / 230V Cutting area: 100mm x 145mm feed: stepless saw band speed: 22 / 31 / 55 m/min Saw band dimension: 1638 x 13 x 0.65 mm Iiodpfxsgulr Ao Aacjh Cutting angle: -45° to 60 Dimension: 1085mm x 498mm x 978mm Weight: 78kg

Condition: used, Year of construction: 2022, cutting diameter max. 225 mm saw band length 2.480 mm width of saw-band 27 mm dimensions of saw-band 2.480 x 27 x 0,9 mm cutting angle 0 - 60 ° band speed 45 / 90 m/min Cuttingrange 90° max. 225 mm capacity 90 degrees: square 190 mm Isdpfstqmm Sex Aaceih capacity 90 degrees: flat 150 x 245 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 90 mm capacity 60 degrees: flat 120 x 90 mm capacity 45 degrees: round 145 mm capacity 45 degrees: square 150 mm capacity 45 degrees: flat 190 x 150 mm total power requirement 1,3 kW weight of the machine ca. 200 kg dimensions of the machine ca. 2,0 x 2,0 x 2,0 m Metal Bandsaw OPTIMUM - OPTIsaw S 275 N - NEW-MACHINE

Condition: new, Band saw machine Isdpfxedynpco Aacoih Make: OPTIMUM Model: S 275 NV Art.Nr.: 3300265 Condition: new machine Section (round): 225 mm Cutting speed: 20-90 m / min equipped as standard with: -Horizontal vise -Back fence - automatic shut-off after the end of the cut -Späneräumbürste -Coolant system -Manual

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width max. 245 x 150 mm voltage 230 V power capacity 1,5 kW dimensions of saw-band 2480 x 27 x 0,9 mm mitter cutting 0 - 60 ° cutting speed 20 - 90 m/min weight of the machine ca. 185 kg dimensions of the machine ca. 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop Ijdpfonlbmzex Aacjih - Machine base - Coolant device

Condition: new, Year of construction: 2024, functionality: fully functional, Metal Band Saw OPTIsaw S 275NV Description: Quiet operation Sturdy cast construction High cutting accuracy due to vibration-free operation Adjustable lowering of the saw bow via hydraulic cylinder with throttle valve Microswitch for automatic shut-off at the end of the cut Coolant system included Equipped with a high-quality bi-metal saw blade as standard Adjustable material stop for series work Robust machine base Ball-bearing saw blade guide Quick-action vise adjustable via handwheel Clamping of the workpiece with a convenient quick-action lever Ijdpfxsvkczte Aacoih Easy-to-read scale for angle adjustment Overload protection S 275NV Features: Infinitely adjustable saw blade speed: 20 - 90 m/min Speed adjustment possible during operation Pressure gauge for easy and correct saw blade tension adjustment Technical Data: Dimensions and Weights: Length (product): approx. 1400 mm Width/Depth (product): approx. 685 mm Weight (net): approx. 185 kg Max. Width/Depth (product): approx. 985 mm Max. Height (product): approx. 1700 mm Electrical Data: Drive motor power: 1.5 kW Connection voltage: 230 V Frequency: 50 Hz Coolant pump motor power: 90 W Machine Data: Saw blade speed: 20 – 90 m/min Saw blade length: 2480 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Cutting angle: 0 – 60° Feed: Infinitely adjustable Raising of the saw bow: Manual Cutting Ranges: Cutting range at 0° round (solid material): 225 mm Cutting range at 0° square (solid material): 190 mm Cutting range at 0° rectangle lying (solid material): 150 x 245 mm Cutting range at +45° round (solid material): 145 mm Cutting range at +45° square (solid material): 150 mm Cutting range at +45° rectangle lying (solid material): 190 x 150 mm Cutting range at +60° round (solid material): 90 mm Cutting range at +60° square (solid material): 90 mm Cutting range at +60° rectangle lying (solid material): 120 x 90 mm Note on cutting range: The cutting range is determined based on the weight of the saw bow with aluminum. It may vary with different materials and could be smaller (not cutting capacity). Accessories: Material stop Bi-metal saw blade Machine base Coolant pump Price: Available on request

Condition: new, OPTIsaw S 275NV swing frame - metal band saw Description Metal band saw with swivelling saw bracket. S 275NV with adjustable blade speed -Quiet running -Stabile casting -High cutting accuracy due to vibration-free running As the saw bar hydraulic cylinders with adjustable restrictor valve Micro switch for automatic shut-off Coolant system -Equipped with high-quality bi metal blade -Adjustable material stop for serial works -Sturdy machine base -Ball bearing blade Guide Quick clamping Vice adjustable via Handwheel. Secure the workpiece with handy quick-release lever Good readable scale for angle adjustment Overload protection S 275N Motor protection switch Two reversible speed S 275NV Iiedpfxedc H Sis Aacjh -Infinitely variable blade speed 20-90 m / min. Speed change during operation possible Pressure gauge Simple and proper adjustment of blade tension

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.1750mm Width/depth (product): approx.1075mm Height (product): approx.1420mm Weight (net): approx.550kg Width/depth max. (product): approx.1415mm Max. height (product): approx.2000mm Electrical data: Power drive motor: 2.2kW Supply voltage: 400V Mains frequency: 50Hz Isdpfsrah R Tox Aacjih Motor power coolant pump: 0.05kW Machine data: Saw blade speed(s): 36 / 72m/min Saw blade length: 2925mm Saw blade width: 27mm Saw blade thickness: 0.9mm Cutting angle: -45 - +60° Feed: infinitely adjustable Lifting of the saw bow: manual Cutting ranges: Cutting range 0° round (solid material): 270mm Cutting range 0° square (solid material): 230mm Cutting range 0° rectangular horizontal (solid material): 230 x 350mm Cutting range -45° round (solid material): 230mm Cutting range -45° square (solid material): 170mm Cutting range -45° rectangular horizontal (solid material): 140 x 200mm Cutting range +45° round (solid material): 230mm Cutting range +45° square (solid material): 200mm Cutting range +45° rectangular horizontal (solid material): 210 x 220mm Cutting range +60° round (solid material): 140mm Cutting range +60° square (solid material):140mm Cutting range +60° rectangular horizontal (solid material): 140 x 220mm

Condition: used, Year of construction: 2019, operating hours: 19,900 h, functionality: fully functional, machine/vehicle number: 3515170, turning diameter over cross slide: 450 mm, spindle bore: 52 mm, turning diameter over bed slide: 600 mm, center height: 300 mm, turning length: 1,250 mm, quill diameter: 90 mm, quill travel distance: 120 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 10 rpm, swing diameter over cross slide: 450 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, travel distance X-axis: 305 mm, travel distance Z-axis: 1,250 mm, chuck outer diameter: 200 mm, spindle motor power: 30,000 W, Turning machine (Lathe) with driven tools and measuring arm. Iiodjwnqk Aopfx Aacjh

Condition: new, Stylus grinding machine Make: OPTigrind Model: GH 20 T Art.Nr.: 3100125 Isdpfxoc I Tzvs Aacsih Condition: new machine Speed: 5.000 rpm Clamping range: 1-12 mm equipped as standard with: -Collets 385E, size 4 / 6 / 8 / 10 / 12 mm -Corundum pot wheel -Diamond Cup wheel -Device for the Regrinding of chisel -Device for the sharpening of cutters -Apparatus for the grinding of twist drills -Manual

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 3515150, turning diameter over cross slide: 450 mm, turning length: 750 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 305 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 750 mm, spindle motor power: 17,000 W, rapid traverse X-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, quill travel distance: 120 mm, quill diameter: 90 mm, swing diameter over cross slide: 450 mm, turning diameter over bed slide: 600 mm, chuck outer diameter: 200 mm, center height: 300 mm, Turning machine (Lathe) with driven tools, Y axis and measuring arm. Iiedewnp Sxjpfx Aacsh

Condition: used, machine/vehicle number: G-ME125419aP, Metal band saw Optimum S130GH, 0.25 kW, 78 kg Prices subject to change, errors, printing and typesetting errors reserved Iodpfx Asvw Edkeaceih

Condition: used, Drilling machine Optimum B32, good condition, incl. MK4 mounting, 225 mm stop, 125 mm quill stroke Price changes, errors, and typographical mistakes reserved. Isdpfx Aaowzzgheceih

Condition: new, Year of construction: 2025, Heavy-duty design of the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency-stop pushbutton Drilling depth stop LED machine light integrated in the drill head Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel Drilling table can be tilted ± 45° and rotated 360 V-belt cover with safety switch Precision spindle bore Machine operation Safety electrics in 24 V DC voltage. Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle Thick-walled steel column for high force absorption and stability Solid, large dimensioned base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/depth approx. 485 mm Height approx. 2040 mm weight approx. 162 kg Drilling capacity Drilling capacity steel (S235JR) 30 mm Continuous drilling capacity steel (S235JR) 25 mm Drilling table Working surface length 355 mm Working surface width 355 mm Ijdeg Uaiujpfx Aacoih Type of T-slots diagonal T-slots size 14 mm T-slots number 2 Rotation 360 ° Inclination 45 ° Distance spindle - drilling table max. 784 mm Speed range Speed range 120 - 1810 min¯¹ Number of speed ranges 9 Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slots size 16 mm T-slots number 2 Spindle quill stroke 125 mm spindle mounting MK 4 throat 270 mm Location: Ex stock 54634 Bitburg - immediately available- [...]

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 106570506, throat depth: 250 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 120 rpm, total height: 1,700 mm, column diameter: 92 mm, total width: 720 mm, total length: 900 mm, spindle mount: MK 4, drilling depth: 120 mm, table width: 430 mm, table length: 480 mm, overall weight: 135 kg, type of input current: three-phase, input voltage: 400 V, Dear Sir or Madam, Iisdpfx Aaev T A Dmjceh We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. No returns accepted.

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm Iiedpfx Aajucgr Iscsh - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, Year of construction: 2012, bore capacity in steel (diameter) 28 mm bore capacity in steel perm. 24 mm spindle taper ISO 40 DIN 2080 Shank diameter 32 mm quill stroke 115 mm x-travel 500 mm y-travel 250 mm z-travel 541 mm turning speed range - spindle 115 - 3.100 U/min transmission ratio 3 transmission ratio 1 115 - 600 U/min transmission ratio 2 270 - 1.400 U/min transmission ratio 3 590 - 3.100 U/min motor 2,2 kW table surface area 850 x 240 mm T-slot - width 18 mm Iodpfx Aaexgu Imeceih T-slot - distance 80 mm weight of the machine ca. 480 kg dimensions of the machine ca. 1,4 x 1,1 x 2,5 m Drilling and Milling M/C OPTIMUM - OPTImill BF 46 Vario - incl. OPTIMUM base cabinet

Condition: new, Year of construction: 2025, Optimum Optisaw SD 500 Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm Iiodpfxsgd Si Ej Aacjh +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc [...]

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Iisdpfsk Egrpox Aacjh Quick change holder SWH5-B set

Condition: new, Year of construction: 2025, OPTIturn TU 2004V - Lathe with infinitely variable speed control and digital speed display Picture shows OPTIturn TU 2004V Lathe with infinitely variable speed control and digital speed display Precise processing Heavily ribbed prismatic bed made of cast steel, inductively hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Guaranteed concentricity of the spindle nose better than 0.009 mm Automatic length/lead spindle drive With longitudinal, cross and top slide Right-/left-handed rotation switchable in the control panel Emergency-stop pushbutton Rotary chuck protection Thrust bearing Lead screw mounted in two sintered bearings Large thread cutting range due to change gear set Iodjcnxrcjpfx Aacjih Simple and fast speed change via V-belt Change gearbox EMV filter class B (use in private households) Equipment details: Digital speed display Easy to read digital speed display Chip protection on the top slide Quadruple steel holder rotatable Roll rolled trapezoidal threads Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scaling 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Tapered roller bearings in P5 quality Cylindrical centering seat Hardened spindle nose with Ø 21 mm spindle bore Lathe chuck Concentricity better than 0,04 mm Scope of delivery: Three-jaw chuck Ø 100 mm centric clamping

Condition: as good as new (ex-display), Year of construction: 2025, OPTIdrill D 26PRO - Column drilling machine Table and column drilling machine with V-belt drive User-friendly safety switch in accordance with IP 54 with undervoltage release and separate emergency stop switch 400 volt models with right/left rotation Drilling depth stop Precisely machined drilling table with diagonal T-slots Height adjustment of the drilling table via rack Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Aluminum die-cast spindle lever made from one piece with soft-grip handles Industrial motor Iodedqzbnjpfx Aacsih Precision spindle bore Machine operation including safety electronics in 24 V direct current Guaranteed concentricity

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Ijdsg U Uv Uepfx Aacjih Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: excellent (used), Year of construction: 2001, Optimum D 1340 GDE year 2001, top condition - as a training machine - Turning diameter over bed 330 mm Turning diameter over support 160 mm Ijdjvutyhspfx Aacsih Turning length 800 mm Total power requirement 2 kW Machine weight approx. 400 kg Space requirement approx. 2000x1000x1600 mm Bar diameter 38 mm Speed range 70 - 2000 rpm Spindle nose Feed range 0.025 - 2.553 mm/rev Suitable for threads: Metric 0.25 - 11 mm Suitable for threads: Inch 4 - 112 Gg/" Tailstock: MK 3 Control Conventional 3-jaw chuck Location: from stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2025, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Iiodpfx Aasv Sg T Neceh Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base