CNC lathe
Optimum L28 HS CNC

Name: Optimum L28 HS CNC
Brand: Optimum
Price: 23299 EUR
Availability: InStock

ONO plus VAT

€23,299

Year of construction

2026

Condition

Ex-display machine

Location

Hallstadt

Basic data

Machine type:: CNC lathe

Manufacturer:: Optimum

Model:: L28 HS CNC

Year of construction:: 2026

Condition:: as good as new (ex-display)

Price & Location

ONO plus VAT

€23,299

Location:: Dr.-Robert-Pfleger-Straße 26, 96103 Hallstadt, Deutschland

Call

Details about the offer

Listing ID:: A22274522

Update:: 23.09.2026

Description

Optiturn L28 HS CNC lathe directly from the manufacturer.

L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150.

Strutted machine bed made of gray cast iron
- Elaborate spindle bearings
- Emergency stop impact switch
- Central lubrication
- Reference switch
- Maintenance-friendly protective housing
- Rear access flap for maintenance
- Safety switch on the front sliding door
- Turning turret is located behind the turning center (left turning tool)
- Linear guide
- Software package "SINUMERIK 808D on PC" included. (Practical training software, so that
workpieces can be programmed and simulated offline on the PC. Free to
download free of charge
- Two-year SIEMENS warranty included

Technical data

Electrical connection 400 V / 3 Ph ~50 Hz
Total connected load 3.75 kVA

Spindle
Drive motor S1 operation 2.2 kW
Torque drive motor S1 operation 14 Nm
Torque at the spindle 28 Nm
Spindle holder DIN 6350 A2-3
Spindle cone 5C
Spindle bore Ø 30 mm
Cooling lubricant system
Coolant pump output 95 W
Tank capacity 25 liters

Machine data
Center height 169 mm
Center width 430 mm
Rotation Ø over cross slide Ø 200 mm
Rotation Ø over machine bed Ø 300 mm
Speed range
Spindle speeds* 40 - 4,000 min-1

Tool turret
Type electric
Number of tool positions 6 tools
Mounting height, width square max. 16 mm
Mounting diameter of boring bar max. 16 mm

Accuracy
Repeat accuracy ± 0.01 mm
Positioning accuracy ± 0.01 mm

Hodpfx Agozi Er Isgjfn

Bhajn7pvcu

Travel distance
X-axis 145 mm
Z-axis 465 mm

Feed speed
X-axis 10,000 mm/min.
Z-axis 12,000 mm/min.

Machine leasing possible via Siemens Finance. Liquidity required.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2020

25 listings online

Call

Send inquiry

Telephone & Fax

+49 951 9... show

These listings may also fit your interest.

Listing

DECKEL FP1 Aktiv DECKEL DECKEL FP1 Aktiv

Warngau

1,532 km

DECKEL FP1 Aktiv
DECKELDECKEL FP1 Aktiv

Call

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 210 mm, table width: 600 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 850 kg, table load: 200 kg, warranty duration: 3 months, The machine underwent a factory or partial overhaul by us in 2026 and is in top condition. As part of the partial overhaul, a new brake motor was installed. Control System 3-axis – active – digital display HEIDENHAIN TNC 113 Spindle Speed 40–2000 rpm, geometrically stepped direct drive with 18 speed levels for maximum torque and milling performance Feed Rate 5 to 500 mm/min, infinitely adjustable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 80 mm SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600x210 mm Maximum table load: 200 kg Features • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° • Z-axis bellows Options Hodpeyi Amwefx Aggofn • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

See details

Listing

Universal machining center Deckel Maho DMU 50 T

Mindelheim

1,445 km

Universal machining center
Deckel MahoDMU 50 T

Call

Condition: used, Year of construction: 2002, Deckel Maho DMU 50 T Milling machine Condition: Used Year of manufacture: 2002 Operating hours: 34,739 hours Hedpfx Ajzhlq Isggsfn Program running time: 6,435 hours Technical data Tool holder: SK 40 Number of tool positions: 16 Travel ranges X/Y/Z: 500 mm / 400 mm / 400 mm Spindle speed range: 20 - 9000 rpm, stepless Table size: 700 mm x 500 mm, rotary table Motor power: 9 kW at 100% duty cycle / 13 kW at 40% duty cycle Connection: total 17 kVA Weight: approx. 3,000 kg Dimensions L x W x H: approx. 2100 m x 1520 (without peripherals) approx. 2140 mm

See details

Listing

Friesenheim

1,258 km

L-u Z lathe
WeilerPraktikant VCD

Call

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Hfsdpfx Asztyrqsggjn Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

See details

Listing

Mindelheim

1,445 km

CNC lathe
GildemeisterDMG NEF 320 K

Call

Condition: used, Year of construction: 2003, Lathe DMG Type NEF 320 K Condition: Used Year of Manufacture: 2003 Control: SINUMERIK 810DE-L CCUO Cycles for taper turning and thread cutting Technical Data Hfodpjyrggmofx Aggen Swing over bed: 320 mm Swing over cross slide: 150 mm Chuck: 200 mm Cross travel: 150 mm Feed drive AC: 4 m/min Main spindle: Size 6 Spindle bore: 52 mm Spindle mounting: MK 6 Spindle front bearing diameter: 85 mm Drive power: 7 kW Max. torque: 320 Nm Speed range: 14 - 3550 rpm Gear stages: 2 Tool post: Multifix size B Quill: 70 mm Quill stroke: 120 mm Quill mounting: MK5 Dimensions Length / Width: 2600 mm / 1440 mm Weight: approx. 1440 kg

See details

Listing

Germany

1,293 km

CNC Cycle Lathe
GildemeisterNEF 320

Call

Year of construction: 2003, condition: ready for operation (used), Swing diameter over bed/cross slide: 320mm/150mm, center height: 160mm, distance between centers: 750mm, max. turning length: 740mm, travel X/Z: 185mm/700mm, chuck diameter: 200mm, speed: 4000rpm, rapid traverse X/Z: 5m/10m/min, tool stations: 8, tailstock quill stroke: 120mm, tailstock quill diameter: 60mm, machine dimensions X/Y/Z: approx. 2300mm/1500mm/1700mm, weight: approx. 2000kg, control: Heidenhain. Documentation available. An on-site inspection is possible. Hfedpfxozdum Ds Aggen

See details

Listing

Italy

1,192 km

Hurco VM10i
HurcoVM10i

Call

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 661 mm, travel distance Y-axis: 407 mm, travel distance Z-axis: 508 mm, table load: 1,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, tool weight: 7,000 g, number of axes: 3, This 3-axis Hurco VM10i was manufactured in 2016. It features an X-axis travel of 661 mm, Y-axis travel of 407 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 762 x 406 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VM10i vertical machining centre we have for sale. Contact us for further details. • CNC Control: HURCO MAX 5 (WinMax software version V10.01.131.12) • Table Dimensions: 762 x 406 mm • T-Slots: 3 x 18 mm • T-Slot Center Distance: 10 mm • Spindle Nose to Table Distance: 102 - 610 mm • Spindle Torque: 72 Nm • Rapid Traverse (X/Y/Z): 28,000 mm/min • Tool Magazine Capacity: 24 positions • Maximum Tool Diameter (Adjacent Occupied): 80 mm • Maximum Tool Diameter (Adjacent Empty): 120 mm • Maximum Tool Length: 250 mm • Machine Working Hours: 15,420 h 10 min • Spindle Hours: 2,727 h 59 min • Monitor: 19" Touch Screen • Hardware: 128 GB SSD, 4 GB RAM, Dual-Core 2.7 GHz Processor • Connectivity: 2x USB 2.0 (console), 2x USB (electrical cabinet), 1x Ethernet LAN Hfjdpezgf Htsfx Aggjn Additional equipment • Remote electronic handwheel • Auger-type chip conveyor • Wash gun (water/air) • Status tower lamp • Retention knobs • Leveling pads Technical Specification Taper Size ISO 40

See details

Listing

DECKEL MAHO DMU 50 T DECKEL MAHO DMU 50 T

Italy

1,192 km

DECKEL MAHO DMU 50 T
DECKEL MAHODMU 50 T

Call

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: na, This DECKEL MAHO DMU 50 T was manufactured in 2002. It features a spindle mount of SK40 DIN69871, a table size of 700x500 mm, and a maximum RPM of 9000. Ideal for versatile machining tasks. Contact us for more information. Machine Benefits Technical Machine Benefits • Table dimensions: d700x500 • Spindle mount: sk40 din69871 Hfedpfxex D Duks Aggjn Extra Information Machine still under power

See details

Listing

Tool milling machine Friedrich Deckel FP2 NC Dialog 11

Denkendorf

1,457 km

Tool milling machine
Friedrich DeckelFP2 NC Dialog 11

€7,800

EXW ONO plus VAT

Call

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2836-0192, Machine in good used condition, Dialog 11 control. Until recently, it was only rarely in operation in our own workshop. Documentation/manuals etc. are available. Additional accessories, cutters, zero point probes, etc. can be purchased optionally. Hedpfx Ageylawxsgjfn

See details

Listing

Immendingen

1,338 km

CNC lathe
LICOLNT 65S-S4 Mitsubishi

Call

Condition: new, Year of construction: 2027, functionality: fully functional, turning diameter: 51 mm, This machine is a new lathe. STANDARD EQUIPMENT Main spindle 15 KW, 4,000 RPM with Mitsubishi M830 control with 4 cross slides on the main spindle with an 8-position servo turret VDI30x55 all stations can be used for rotary tools central milling drive 3.3 KW, 3000 RPM including stable multi-tool function (without tool holder) with full C-axis on the left spindle and on the sub-spindle with 48-position spindle locking as support for milling including sub-spindle with workpiece collection tray and finished part conveyor for falling cut-off parts or scrap pieces with swiveling finished part conveyor for finished part discharge after back-end machining 4 tool holders for the back end with programmable high-pressure coolant for cleaning clamping devices before the next workpiece is loaded with HD coolant pumps, 70 bar with separate coolant tank (300 liters) with handwheel coolant and hydraulic pumps Hedsug Up Nspfx Aggjfn bar feeder interface interface for Lico chip conveyor 1 set of slide base holders automatic lubrication system cutting force monitoring on all stations control cabinet with air conditioning unit 3-way signal lamp in addition, the machine is equipped with a turret for back-end machining. This turret is designed for solid tools only. BASIC MACHINE EQUIPMENT Interface for Lico/FMB bar feeder Programming support for Lico machines Color Door RAL 7015 Slate Gray Chip tray/frame RAL 7024 Graphite Gray Housing RAL 7035 Light Gray

See details

Listing