Used Optimum S 130 Gh for sale (112)

Condition: as good as new (ex-display), Year of construction: 2020, The machine is on display and has only been used for demonstration purposes. Optimill F 120X CNC milling machine, directly from the manufacturer. F 120X – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. - Heavy-duty design - High productivity - Linear guides for high rapid traverse speeds on all axes - 21-position tool changer magazine - High reliability - Meehanite quality cast-iron construction - Cross table, precision-ground with 3 T-slots - Strongly ribbed, torsion-resistant machine base - Precision-ground, preloaded high-performance ball screws on all axes - High-torque servo drives mounted directly on the ball screws on all three axes - Electronic handwheel - Chip conveyor - Cleaning pistol - RJ45 connection, USB port, and power connection (230V) - Coolant system with 210-litre coolant tank - Heat exchanger Included options: - PPU 290 touch panel - 16,000 rpm inline spindle with oil cooler - Belt conveyor with chip trolley Machine leasing available via Siemens Finance; liquidity required. Dimensions and Weights - Length approx. 2,315 mm - Width/depth approx. 2,194 mm - Height approx. 2,325 mm - Weight approx. 3,800 kg Drilling/Milling Capacity - Maximum cutter head size: 80 mm Feed/Rapid Traverse Speed - X-axis: 40,000 mm/min - Y-axis: 40,000 mm/min - Z-axis: 40,000 mm/min Electrical Data - Connection voltage: 400 V - Number of phases: 3 Ncodpfeymkbqox Amnst - Current type: AC - Mains frequency: 50 Hz - Electrical connection - Total connected load: 45 kVA Vertical Spindle to Table Distance - Minimum: 150 mm - Maximum: 450 mm T-slot Size: 14 mm Number of T-slots: 3 T-slot pitch: 125 mm Maximum table load: 250 kg Accuracy - Repeatability: ± 0.006 mm - Positioning accuracy: ± 0.005 mm Coolant System - Coolant pumps - Each pump drive power: 370 W - Tank capacity: 120 l Control - Type: Sinumerik 828D PPU 290 - System software: SW 28x - CNC memory: 8 MB - Block change time: 2 ms - Look ahead: 150 - Number of tools: 512 Travel Range - X-axis, automatic: 500 mm - Y-axis, automatic: 400 mm - Z-axis, automatic: 300 mm Vertical Spindle - Spindle taper: BT 30 - Speed range: 10 – 16,000 rpm - Main drive power (continuous S1): 12 kW - Main drive power (S6-30% operation): 22.8 kW - Main drive torque (continuous S1): 38 Nm - Main drive torque (30% operation S6): 116 Nm Feed Motor Torque - X-axis, continuous S1: 6 Nm - Y-axis, continuous S1: 6 Nm - Z-axis, continuous S1: 11 Nm Servo Tool Changer - Design: Carousel in front of the spindle - Number of tool stations: 21

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F110 ECO Premium CNC milling machine, direct from the manufacturer. F110 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Model: F110 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Ncedpsymkbkofx Amnst Milling spindle with belt drive Machine Specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 7.5 kW Torque of drive motor S1 operation: 45 Nm Drive motor S6 30% operation: 16.2 kW Torque of drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Coolant System Coolant pump output: 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (neighboring tool pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel (Axis Movement) X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z-axis: 48 / 48 / 32 m/min Motor Torque X / Y / Z-axis: 11 Nm / 11 Nm / 20 Nm Feed Forces X / Y / Z-axis: 3.67 kN / 3.67 kN / 6.68 kN Spindle Speed Range Speeds*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6–8 kg/m³ Milling Table Distance spindle to table: 100–600 mm Table length x width: 800 x 400 mm T-slot size / number / pitch: 18 mm / 3 / 100 mm Max. payload: 400 kg Dimensions Length x width x height: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg Equipment Linear guides with ball screw drive for high rapid traverse speeds on all axes Telescopic guideway covers on all three axes Automatic lubrication system Portable electronic handwheel with enabling switch and emergency stop button RJ45 interface and 230 V power outlet Work area machine lamp Cleaning pistol Ball screws and linear guides from THK Chip flushing system Cooling at the spindle head (machining area) Control cabinet Arm-type tool changer SW24 CE *More options available

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optimill F 110 E CNC milling machine, direct from the manufacturer. F 110 E – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 808D control, stands out for its performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with ball circulation for high rapid traverse speeds on all axes • Powerful servo drives on all three axes • Telescopic covers on all guideways • Automatic lubrication • Spindle oil cooler • Solid, precision-ground milling table with three oversized T-slots • The portable electronic handwheel with enabling button and emergency stop switch greatly facilitates program setup • Coolant system with chip flushing and cleaning gun • Chip conveyor with auger design • Chip cart • RJ45 interface and 230 V power connection • Enclosed electrical cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of dirt particles • Machine lamp providing over 500 Lux in the working area Nodpjymkbdsfx Amnsct RJ45 Ethernet port 8.4” LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function: enables easy optimization for higher requirements in dynamics and accuracy Absolute encoder / no reference run necessary Higher accuracy Travel distances: X = 650 mm Y = 400 mm Z = 500 mm Dimensions and weights Length approx. 2,100 mm Width/depth approx. 2,300 mm Height approx. 2,750 mm Weight approx. 4,100 kg Boring/milling performance Max. cutter head size: 90 mm Electrical data Connection voltage: 400 V Network frequency: 50 Hz Electrical connection Total connected load: 20 kW Horizontal milling table: Length: 850 mm Width: 400 mm Distance spindle nose to table min.: 100 mm Distance spindle nose to table max.: 600 mm T-slot size: 18 mm Number of T-slots: 3 T-slot spacing: 100 mm Maximum load capacity: 400 kg Accuracy Repeat accuracy: ±0.005 mm Positioning accuracy: ±0.005 mm

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optimill F200 ECO Premium CNC Milling Machine—direct from the manufacturer. F200 ECO – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D Control stands out for its performance, speed, precision, and long service life. Model: F200 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling Spindle: Belt Drive Machine Specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 9 kW Drive motor torque S1 operation: 57 Nm Drive motor S6 30% operation: 17.1 kW Drive motor torque S6 30% operation: 118 Nm Spindle taper: BT40 Coolant System Coolant pump power: 900 W Max. delivery rate: 35 l/min Tank capacity: 116 liters Flushing pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed Drive Rapid feed, X-/Y-/Z-axis: 48 / 48 / 48 m/min Motor Torque X / Y / Z-axis: 16 Nm / 16 Nm / 20 Nm Feed Forces X / Y / Z-axis: 5,34 kN / 5,34 kN / 6,68 kN Speed Range Spindle speed*: 10,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6 – 8 kg/m³ Milling Table Spindle-to-table distance: 100 – 650 mm Table length × width: 1000 × 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Maximum load capacity: 500 kg Dimensions Length × width × height: 2,400 × 2,355 × 2,860 mm Total weight: 5,500 kg Equipment • Linear guides with ball screw for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Automatic lubrication • Portable electronic handwheel with enabling switch and emergency stop • RJ45 port and 230 V power outlet Nedpfxjymd Nbs Amnoct • Machine lamp in work area • Cleaning blow gun • Ball screws and linear guides from THK • Chip flushing system • Cooling at the spindle head (machining area) • Control cabinet • Arm-type tool changer • SW24 • CE compliant *More options available

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 150 E CNC milling machine direct from the manufacturer. F 150 E - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. Carousel tool changer with 16 tool positions All linear guides with stainless steel covers Automatic central lubrication Siemens main spindle motor Servo drive from SIEMENS in all axes (closed control loop) Chip conveyor in belt design ensures efficient chip removal Chip trolley Max. Spindle speed 10,000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Coolant system with 190 liter coolant tank Tools are changed automatically or at the touch of a button Solid, exact milling table, large dimensions and precise surface finish Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Thanks to its technology-specific features, the SINUMERIK 808D ADVANCED control is perfectly preconfigured for milling. Thanks to the hardware and software extensions, the SINUMERIK 808D ADVANCED also offers sufficient performance for simple milling functions in mold and tool making. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function; enables simple optimization for higher dynamic and accuracy requirements Absolute encoder / no reference run required Higher accuracy Travel distance: X=750mm Y=500mm Nedpfjymdygex Amnjct Z=500mm Dimensions and weights Length approx. 3420 mm Width/depth approx. 2050 mm Height approx. 2400 mm Weight approx. 4500 kg Drilling/milling capacity Cutter head size max. 80 mm End mill size max. 38 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 15 kW Horizontal milling table Length 900 mm Width 500 mm Distance vertical spindle - milling table min. 100 mm Distance vertical spindle - milling table max. 600 mm T-slots size 18 mm Number of T-slots 5 T-slot spacing 80 mm Load capacity max. 350 kg Accuracy Repeat accuracy ±0.005 mm Positioning accuracy ±0.01 mm

Condition: as good as new (ex-display), Year of construction: 2025, GT 25 – The OPTIMUM Premium NC Grinding Machine with Siemens Touchscreen. • Electromagnetic chuck for securing the workpiece, with automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter-guides for high wear resistance and low friction • Grinding spindle with premium precision bearings • Grinding wheel can be dressed directly on the machine with an integrated dressing device • Digital position display • Machine base made of stable, torsion-resistant cast iron for maximum rigidity and stability • Longitudinal, cross, and vertical axis guideways are backlash-free and self-centering, designed as V and flat guideways • Precision ball screws • Central lubrication for guideways and feed screws • All flat guides are finely scraped, guaranteeing maximum precision in all manual movements • Safety electronics with 24 V DC • Large, decoupled handwheels on all three axes • Hydraulic lines according to DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all standard steels • Swivel control panel makes operation significantly easier • Separate hydraulic unit with heat exchanger prevents vibrations and thermal loading • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduces energy consumption, providing substantial cost savings Technical Data: Dimensions and Weights Length approx. 2300 mm Width/Depth approx. 1600 mm Height approx. 1675 mm Weight approx. 1700 kg Electrical Data Total connected load: 3 kW Supply voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Surface Grinding Table Length: 254 mm Width: 508 mm Grinding Wheel(s) Outer diameter: 200 mm Width: 20 mm Bore: 31.75 mm Peripheral speed: 33 m/s Spindle Speed: 2850 rpm Radial runout accuracy: 0.005 mm X-Axis Feed speed: 5 – 25 m/min Packaging unit: 1 Scope of Delivery Unit: Piece Packing unit: 1 Digital position display Coolant system Balancing arbor Grinding wheel, grit 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic chuck Demagnetization function Ncedpfx Ajymdwfomnjt Features Electromagnetic chuck Table splash guard enclosure Automatic demagnetization device Parallel dressing device 40 W coolant system LED work lamp Leveling feet

Condition: as good as new (ex-display), Year of construction: 2025, GT 40 – The OPTIMUM Premium NC Grinding Machine with Siemens Touch Screen. • Electromagnetic clamping plate for securing the workpiece, featuring automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter-guides for high wear resistance and low friction • Grinding spindle equipped with premium precision bearings • The grinding wheel can be dressed directly on the machine using the dressing device • Digital position display • Machine base made from stable, torsion-resistant cast iron for maximum rigidity and stability • Guideways for longitudinal, cross, and vertical movements are backlash-free and self-centering, designed as V and flat ways • Precision ball screw drives • Guideways and feed screws with centralized lubrication • All flat guides are hand-scraped, guaranteeing the highest precision for all manual movements • Safety electronics with 24 V DC voltage • Large, decoupled handwheels on all three axes • Hydraulic lines compliant with DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all common steels • Swiveling control panel for greatly simplified operation • Separate hydraulic unit with heat exchanger to prevent vibrations and thermal stress • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduces energy consumption and provides substantial cost savings Dimensions and Weights Length approx. 3600 mm Width/Depth approx. 2400 mm Height approx. 1900 mm Weight approx. 3600 kg Electrical Data Total connected load: 7.5 kW Supply voltage: 400 V Mains frequency: 50 Hz Surface Grinding Table Clamping area length: 400 mm Njdpoymduqefx Amnjct Clamping area width: 800 mm Grinding Wheel(s) Outer diameter: 350 mm Width: 40 mm Bore: 127 mm Peripheral speed: 27 m/s Spindle Speed: 1450 rpm Run-out accuracy: 0.005 mm X-Axis Feed rate: 5 – 25 m/min Standard Features • Digital position display • Coolant system • Balancing arbor • Grinding wheel, grit 46 • Diamond dresser • Operating tools • Manual oil pump • LED lamp • Electromagnetic clamping plate • Demagnetization function Equipment • Electromagnetic clamping plate • Table enclosure with splash guard • Demagnetization device • Parallel dressing device ✔ • Coolant system 125 W • Working light: LED lamp • Leveling feet ✔

Condition: as good as new (ex-display), Year of construction: 2025, GT 30 - The OPTIMUM premium NC sanding machine with Siemens touch screen. - Electromagnetic clamping plate for fixing the workpiece with automatic demagnetization function - High-quality spindle with precision tapered roller bearings - Hardened and ground table guideways - Turcite-B coated counter guides for high wear resistance and low friction - Grinding spindle with high-quality precision bearings - Grinding wheel can be resharpened directly on the machine using a sharpening device - Digital position indicator - Machine base made of sturdy torsion-resistant cast iron for maximum rigidity and stability - Guideways for longitudinal, transverse and vertical movements are backlash-free and self-centring as V and flat tracks - Precision recirculating ball screws - Guideways and transport spindle with central lubrication - All flat guides are finely scraped and thus guarantee maximum precision of all manual movements - Safety electrics with 24 V DC voltage - Large decoupled handwheels in all three axes - Hydraulic lines according to DIN EN 853 Ncjdpfx Ajymdtyjmnjt - Sanding accuracy: 0.005 mm - Grain 46 corundum grinding wheel for all common steels - Swivel-mounted control panel makes work considerably easier - Separate hydraulic unit with heat exchanger, avoids vibrations and thermal stress - Two-channel safety electronics - Grinding table splash guard - EMC filter class - With IE3 motor - consumes considerably less energy, resulting in significant cost savings Dimensions and weights Length approx. 3200 mm Width/depth approx. 2200 mm Height approx. 2100 mm Weight approx. 3000 kg Electrical data Total connected load 6.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Clamping surface length 300 mm Clamping surface width 600 mm Grinding wheel(s) Outer diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 min¯¹ Concentricity 0.005 mm X-axis Feed speed 5 - 25 m/min Scope of delivery Unit of measure: piece Packaging unit: 1 Digital position indicator Coolant device Balancing mandrel Grinding wheel grit 46 Diamond pin Operating tool Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Equipment Electromagnet clamping plate Splash guard table enclosure Automatic demagnetizing device Parallel dressing device ✔ Coolant device 125 W Work light LED lamp Alignment feet ✔

Condition: new, turning diameter 360 mm turning length 1000 mm swing diameter over bed slide 360 mm centre height 180 mm turning speeds 70-2400 U/min total power requirement 2,2 kW weight of the machine ca. 680 kg dimensions of the machine ca. 2000x1500x900 mm Ncsdpfsw U U Tmex Amnjt

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 Nedpfx Ajucgr Iomnsct quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free Nedpfx Aek Egrpsmnoct - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm Ncsdpfx Astv Riaomnot z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Condition: new, diameter of brush Ø 250 mm width of brush 40.0 mm turning speed range 2850 U/min voltage 400 Volt total power requirement 1.3 / 1.8 kW weight of the machine ca. 36.0 kg dimensions of the machine ca. 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses Nedjxaamnopfx Amnoct - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions

Condition: good (used), Manufacturer: Optimum Type / Model: DDP 50 Pressing force: 1.5 t Ncjdpfjrdgrksx Amnst Table: mm ram: 50 x 50 x 647 mm Projection: 226 mm Lever length: 850 mm Plunger stroke: max. workpiece height: 459 mm Accessories/equipment: Condition: good Weight: 167 kg Dimensions: 650 x 370 x 785 mm

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 355 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 245 mm, spindle speed (max.): 3,000 rpm, table width: 180 mm, table length: 530 mm, TECHNICAL DETAILS Number of axes: 3 X-axis travel: 355 mm Y-axis travel: 190 mm Z-axis travel: 245 mm Max. spindle speed: 3,000 rpm Interface: BT30 Table size (length): 530 mm Table size (width): 180 mm Max. workpiece weight: 30 kg Control type: Siemens 808D Control system: CNC Motor power: 1.5 kW MACHINE DETAILS Dimensions (L x W x H): 1,400 x 1,380 x 2,000 mm Transport weight: 1,400 kg Number of transport packages: 1 Documentation available: Yes CE marking: Yes EQUIPMENT - Siemens 808D control - CNC controlled Ncedpfx Aew Tzkismnot - Documentation available - CE marking - Large vise - Indexing head - Precision vise - 19 BT30 tapers - ER32 and ER25 collet sets - CamBamPro with license (drawing/programming) and postprocessor configured for Siemens - Complete technical documentation

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 3336050, feed length X-axis: 900 mm, feed length Y-axis: 320 mm, feed length Z-axis: 400 mm, travel distance X-axis: 900 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,750 rpm, spindle speed (min.): 6 rpm, table width: 254 mm, table length: 1,370 mm, type of input current: three-phase, table load: 275 kg, overall weight: 1,150 kg, input voltage: 400 V, Equipment: documentation/manual, Conventional milling machine. Ncedpfxovyz H Hj Amnot

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 201719100382, turning diameter over cross slide: 400 mm, spindle bore: 52 mm, turning diameter over bed slide: 245 mm, center height: 200 mm, turning length: 800 mm, quill diameter: 50 mm, quill travel distance: 110 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 45 rpm, swing diameter over cross slide: 245 mm, three-jaw chuck diameter: 250 mm, travel distance X-axis: 212 mm, travel distance Z-axis: 750 mm, chuck outer diameter: 400 mm, spindle motor power: 5,000 W, Conventional Turning machine (Lathe) with digital position display. Njdpfxewnp Sxo Amnect

Condition: new, Year of construction: 2026, Heavy-duty design of the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency-stop pushbutton Drilling depth stop LED machine light integrated in the drill head Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel Drilling table can be tilted ± 45° and rotated 360 V-belt cover with safety switch Precision spindle bore Machine operation Safety electrics in 24 V DC voltage. Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle Thick-walled steel column for high force absorption and stability Solid, large dimensioned base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/depth approx. 485 mm Height approx. 2040 mm weight approx. 162 kg Drilling capacity Drilling capacity steel (S235JR) 30 mm Continuous drilling capacity steel (S235JR) 25 mm Drilling table Working surface length 355 mm Working surface width 355 mm Type of T-slots diagonal T-slots size 14 mm T-slots number 2 Ncodpfx Ameg Uaiujnst Rotation 360 ° Inclination 45 ° Distance spindle - drilling table max. 784 mm Speed range Speed range 120 - 1810 min¯¹ Number of speed ranges 9 Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slots size 16 mm T-slots number 2 Spindle quill stroke 125 mm spindle mounting MK 4 throat 270 mm Location: Ex stock 54634 Bitburg - immediately available- [...]

Condition: used, Technical Data: Travel X/Y/Z: 700 / 250 / 430 mm Upper slide travel: 630 mm Spindle speeds: 45 - 1660 rpm Spindle taper: SK 40 Control: conventional Table feed: 24 - 402 mm/min Milling head swivels: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (W x D x H), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital readout - Machine lamp - Coolant device - Machine feet Nodeyi E Udopfx Amnsct

Condition: used, Year of construction: 2014, throat 180 mm quill stroke 80 mm continious capacity 20 spindle taper MK 2 table-size 280 x 245 mm Nsdpjxbtrgsfx Amnjct height of the machine ca. 1000 m column diameter 73 mm distance spindle /table max. 425 mm dimensions ca. 615 x 330 x 1015 mm weight ca. 60 kg incl. vice HM Müller HT100P

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3501100, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10,000 rpm, rapid traverse X-axis: 10 m/min, TECHNICAL DETAILS Travel Paths X-axis travel: 550 mm Y-axis travel: 305 mm Z-axis travel: 460 mm Main Spindle Main spindle speed range: 10 - 10,000 rpm Drive power - main spindle: 11 / 7.5 kW Max. torque: 70 / 48 Nm Tool holder: BT 40 Worktable Clamping surface: 800 x 320 mm Max. table load: 300 kg T-slots: 3x 14 x 100 mm Distance spindle / table: 100 - 600 mm Tool Changer Number of tool stations: 12 Tool holder: BT 40 Max. tool diameter: 70 mm Max. tool weight: 6.0 kg Tool-to-tool change time: 7.0 sec Feed Rates Rapid traverse (X / Y / Z): 10 m/min Feed rate: max. 10,000 mm/min Repeatability: +/- 0.008 mm Positioning accuracy: +/- 0.01 mm MACHINE DETAILS Nedpjxb Aczsfx Amnoct Control: Siemens Sinumerik 808D adv. Space & Weight Required space approx.: 3.5 x 2.5 x 2.4 m Machine weight approx.: 2,800 kg Total power requirement: 15 kVA EQUIPMENT Documentation Chip removal system Coolant system Tool changer RENISHAW - Primo touch probe

Condition: used, Year of construction: 2017, Milling machine Optimium Optimil F 105 Njdpfx Aeyphnyemnsct

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 270 mm z-travel 430 mm 630 mm table-size 1120 x 270 mm spindle turning speed range 45 - 1660 U/min spindle taper SK 40 control konventionell spindle motor 2,2 kW total power requirement 2,4 KVA weight of the machine ca. 1,35 t dimensions 1,8 x 1,4 x 1,8 m Machine equipped with: - Digital display - Machine light - Coolant system - Machine feet Nodsv Sdz Rjpfx Amnoct

Condition: good (used), Year of construction: 2017, operating hours: 60 h, functionality: fully functional, machine/vehicle number: 333840, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 510 mm, spindle mount: MK 3, quill travel distance: 120 mm, type of input current: three-phase, table width: 210 mm, input voltage: 400 V, table length: 750 mm, drilling capacity: 32 mm, distance table center to spindle nose: 275 mm, rotational speed (max.): 3,200 rpm, rotational speed (min.): 95 rpm, rapid traverse X-axis: 240 m/min, Equipment: documentation/manual, The milling machine is fully functional and can be tested. It is being sold due to the purchase of a larger model. Technical documentation is available. The milling machine has a robust base cabinet housing the coolant pump. The automatic table feed features: - Emergency stop function, no automatic restart - Infinitely variable speed control and rapid traverse - Left/right feed direction - Overload protection and limit switches - Speed: 0 - 165 rpm Nedpfxsyrib To Amnjct - Rapid traverse: 240 rpm Three-axis position display, accuracy class 0.01 mm.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Nedpfx Amow Rhk Rsnjct Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim