Used Okuma Mc 60 H for sale (231)

Year of construction: 2006, condition: ready for operation (used), Control Unit Ncodpfxex D Nf Ij Agwep Brand OKUMA Model OSP-P200L This Okuma LU300-M was manufactured in 2006. A robust horizontal turning machine featuring a spindle bore of 62mm and speeds up to 5000 RPM. It includes dual turrets with 12 and 8 positions respectively, enhancing its versatility. Equipped with a Mayfran chip conveyor and OSP-P200L control for efficient operation. Consider the opportunity to buy this Okuma LU300-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2021, CNC Lathe Okuma Genos L3000 e MYW Control: OSP-P300LA-e Year of manufacture: 2021 Internal machine no.: 15 Max. machining diameter: 390 mm Swing diameter over cross slide: 260 mm Max. turning length: 500 mm Travel paths: X-axis: 235 mm Z-axis: 450 mm Y-axis: ±50 C-axis: 360° / 0.001° Turret: 12 stations – all driven Spindle speed: 38 - 3,800 rpm Tool holder: VDI 40 Accessories/Equipment: - Chip conveyor - Touch setter - One Touch IGF - Parts catcher Ncjdpfx Agsyt E A Newsp - Reinforced coolant system 8 bar - Extraction unit

Condition: excellent (used), Year of construction: 1996, Control: OSP 700M Travel X/Y/Z: 1050 x 560 x 450 mm Table size: 1300 x 560 mm Spindle speed: 6,000 rpm Tool magazine for 20 tools, BT 50 Chip conveyor Nsdpfsyw Ui Iex Agwscp Approx. 40 toolholders BT 50

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, type of input current: three-phase, We are offering this ready-to-use Okuma LB15 CNC lathe, year of manufacture 1989. Noted defects: The seal on the Plexiglas door should be replaced over time. The machine is still in operation and can therefore be inspected and tested on site. Manufacturer: Okuma Ncsdoyw Hniopfx Agwop Model: LB15 Year of manufacture: 1989 Mains voltage: 380 V Number of phases: 3 Rated power: 21 kVA Frequency: 50 Hz Total rated current: 36 A Maximum motor current: 28 A Breaking capacity: 7.5 kA Circuit diagram no.: W5000-118-068 Serial number: 5813 If you have any questions or need further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 135908, turning diameter: 710 mm, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 690 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,200 mm, total length: 6,000 mm, total width: 2,500 mm, overall weight: 14,000 kg, spindle diameter: 120 mm, tool length: 400 mm, controller manufacturer: OKUMA, controller model: OPS-P 200 L, tool weight: 1,000 g, number of slots in tool magazine: 20, Equipment: chip conveyor, OKUMA MULTUS B 300 CNC Turning and Milling Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 96 A - Connection load: 47.8 kVA - Swing diameter over bed: 710 mm - Distance between centers: 1500 mm Ncodpfxeyvrq Hj Agwop - B-axis travel: 1550 mm, rapid traverse: 12 m/min - C-axis travel, control angle: 360°, rapid traverse: 200° - B-axis indexing angle: 0.001° - Number of tools: 1 L or M tool 25 mm, diameter: 40 mm - Rotational speed of live tools: 6000 rpm - Tool holder: HSK 63 - Including chip conveyor, coolant system, as well as tool holders as equipped on the tool changer Note: The item must be collected between 12.05. and 22.05.2026 on a binding, mutually agreed date. FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 151576, travel distance X-axis: 690 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,500 mm, total length: 9,500 mm, total width: 2,500 mm, overall weight: 14,500 kg, tool length: 400 mm, controller manufacturer: OKUMA, controller model: OSP-P 200 L, tool diameter: 90 mm, tool weight: 1,000 g, number of slots in tool magazine: 40, OKUMA MULTUS B 400 CNC Turning and Milling Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 190 A - Connection load: 58.9 kVA - Turning diameter: up to max. 710 mm - Swing diameter over cross slide/bed: 710 mm - Y-axis travel: +115 / -115 mm - C-axis travel: 360° - B-axis travel: 225° - Main spindle chuck diameter: 340 mm - Spindle nose diameter (front bearing): 150 mm - Spindle bearing diameter: 101.6 mm - Feed rate in X/Y/Z: 0 - 1000 mm/rev - Rapid traverse X/Y/Z/W: 40/26/40/20 m/min - Rapid traverse C-axis: 200 rpm, B-axis: 30 rpm - NC tailstock (W-axis) - Taper: MK 4 Ncodpfx Agsyvrn Ejwop - Tool holder: HSK 63 - Including chip conveyor and coolant system Note: The HSK tool holders in the tool magazine are included in the scope of delivery! Note: In 2023, the machine underwent several overhauls with a total value of EUR 34,000. Documentation available; detailed breakdown upon request! Note: Item must be picked up bindingly between 12.05. and 22.05.2026 on a date yet to be agreed. FCA D-74821 Mosbach – loaded onto truck

Condition: excellent (used), Travels: X-axis: 155 mm Z-axis: 320 mm Swing diameter over bed: 450 mm Swing diameter over carriage (slide): 350 mm Maximum turning diameter: 270 mm Maximum turning length: 500 mm Spindle speed, infinitely variable: 75 – 3500 rpm Spindle motor: 7.5 kW Tool turret: 12 stations Dimensions (L x H x W): 2200 x 1635 x 1670 mm Nodpfx Ajyvy Utogwjcp Weight: 3800 kg

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Ncsdjyn Em Rspfx Agwjp Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller: OSP-100L, IGF Turning length: 200 mm Turning diameter: 280 mm Sloping bed: No Spindle bore: 62 mm Turret head: Yes, 12 positions VDI 40 Travel X-axis: 210+845 mm Travel Z-axis: 360 mm Swing over bed: 320 mm Ncjdpfowufc Tjx Agwep Spindle speed: 40-400/min Main motor power: 15 kW X-axis rapid feed: 60 m/min Z-axis rapid feed: 30 m/min Machine weight: 6000 kg

Condition: like new (used), Year of construction: 2022, operating hours: 930 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 360 mm, controller manufacturer: Okuma, controller model: OSP P300MA + 3D kit, workpiece weight (max.): 350 kg, table width: 760 mm, table length: 460 mm, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 930 h, spindle motor power: 15,000 W, spindle nose: HSKA63, number of slots in tool magazine: 20, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, High precision Die/Mold vertical CNC, actively cooled frame & spindle. 0.1um control, 4 digits after the decimal point. Full options, including Renishaw, air on the spindle, laser measurement etc. See attached PDF for a detailed list including software options and accessoires. Cleaned and ready for installation. All checks allowed (at buyers expense, machine stored in warehouse), we can ask Okuma to make a test report if required. New price was 300.000 euro's, so half price for an as-new machine with only 930 hours! Ncsdpfswzzrkjx Agwjp

Condition: good (used), Year of construction: 1998, functionality: fully functional, OKUMA LCC15, OSP 700L, collet chuck, chip conveyor, coolant pump, touch setter, chip conveyor, parts catcher, V12 turret direct mounting. Ncodpfxoyq S E Sj Agwjp A very compact and efficient machine for bar stock workpieces. * The LNS bar feeder is included free of charge with the machine, but it is not part of the sale and must be electronically serviced by an LNS technician.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, total height: 2,950 mm, total length: 2,900 mm, total width: 2,600 mm, rotary table diameter: 400 mm, rotational speed (min.): 25 rpm, rotational speed (max.): 15,000 rpm, overall weight: 8,000 kg, operating hours of spindle: 18,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, OKUMA MU-400V with OKUMA OSP P200M CNC Control 5-axis CNC machining center Spindle drive 50-15,000 rpm (ISO40/BIGPLUS) 22 kW / 198 Nm Tool changer SK40 according to DIN 69871 (BT40) Tool changer with 32 magazine positions Electronically controlled spindle head flushing system Thermal compensation and machine body ventilation system for compensation or reduction of thermal errors (TAS-S and TAS-C) Coolant supply through the spindle 15 bar / 20 l/min Double screw chip conveyor for chip removal from the working area Synchronous tapping and thread milling Removable electronic handwheel 100 workpiece zero points 200 tool length and 200 tool radius offsets LCD color display OKUMA I-MAP auxiliary dialog Ncjdpsyq Sl Eefx Agwep 2 USB 2.0 ports Ethernet interface with browser and DNC-T1 for program transfer Work area shower cooling system Hinged belt chip conveyor, discharge height 1000 mm Tool breakage monitoring and tool length measurement

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, workpiece length (max.): 300 mm, total height: 2,850 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 560 mm, table height: 800 mm, table length: 1,300 mm, overall weight: 8,000 kg, spindle speed (min.): 25 rpm, spindle speed (max.): 15,000 rpm, tool diameter: 125 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, OKUMA MB56 VA Ncsdpfxsyq R I Ss Agwop OSP P200M, ATC for 32 tools SK40, chip conveyor, bag filter for internal cooling, 15,000 rpm. Feel free to request our all-inclusive package: loading, transport, installation, commissioning, and service.

Condition: excellent (used), functionality: fully functional, Commissioning: as Okuma stock machine 09.2017 Control OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor with 32 kW output Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations Nsdoyviigjpfx Agwocp ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for the lower turret) ▪ Automatic door ▪ Robot interface type E for connecting other loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2-stage Range switching at full speed ▪ Lower turret: 12 stations In ZB-axis with cylindrical roller guide In XB-axis with slide guide ▪ Real-time collision avoidance system CAS ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touchscreen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° steps ▪ Y-axis with travel +150/-150 = 300 mm ▪ B-axis 240° Positioning in 0.001° steps ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement system (with standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Parts program memory 2 GB ▪ Max. length individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 5,000 rpm, travel distance Y-axis: 120 mm, spindle motor power: 22,000 W, number of axes: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details. • Control: OSP P 300LA • Spindle: ASA 6" nose (bore 80 mm, without drawbar); bar capacity 52 mm (Kitagawa SR1453 cylinder); electric spindle orientation • Axes: Y-axis travel 120 mm ; C-axis rotation 360° (0.001° increment) • Turret: 12-position radial, motorized; turret motor 6,000 rpm, 7.1 kW • Tailstock: CM5; 500 kgf thrust; rotating tip • Pedals: Separate for spindle and tailstock • High-pressure coolant pump: 0.8 kW; 6 bar; 20 l/min • Tool presetting: Manual Njdjyq Ngmopfx Agwecp • Programming: Conversational IGF

Condition: ready for operation (used), Year of construction: 2018, This Okuma Genos L 300E-MY-e was manufactured in 2018. A robust horizontal turning machine located in Italy, it features a 450 mm maximum swing and a workable length of 1020 mm. The spindle supports a speed of 3000 RPM with a bar capacity of 65 mm. Equipped with a 12-position turret and motorized tool spindle capable of 5000 RPM. Contact us for more information about this machine. Nedpfx Aeyalp Njgwscp Additional equipment • Spindle Speed (Motorized Tool Spindle): 5000 rpm Machine Benefits Technical Machine Benefits • Maximum swing: 450 mm / workable diameter: 340 mm / maximum workable length: 1020 mm / bar capacity: 65 mm • Turret type: 12 ut vdi / number of tools: 12 • Spindle speed (main spindle): 3000 rpm / spindle nose: asa 8 / spindle bore: 65 mm

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 560 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, total height: 2,650 mm, total width: 1,800 mm, overall weight: 5,000 kg, spindle speed (max.): 7,000 rpm, spindle motor power: 11,000 W, tool weight: 8,000 g, number of axes: 3, This 3s Okuma MX-45VAE vertical machining centre was manufactured in 1999. It features a travel range of 560 mm on the X-axis, 460 mm on the Y-axis, and 450 mm on the Z-axis, providing versatile machining capabilities. With a tool magazine capacity of 20 tools and a maximum tool weight of 8 kg, it is well-equipped for various applications. Consider the opportunity to buy this Okuma MX-45VAE vertical machining centre. Contact us for further details. • Spindle end to table surface: 160–610 mm (6.30–24.02 in) • Table: • Working surface: 460 × 760 mm (18.11 × 29.92 in) [optional: 460 × 1000 mm (18.11 × 39.37 in)] • Table surface height from floor: 750 mm (29.53 in) • Load capacity: 3430 N (770 lbf) [optional: 4900 N (1100 lbf)] • Spindle: • Number of speeds: Infinitely variable • Taper: 7/24, NT40 • Front bearing diameter: 70 mm (2.76 in) • Feedrates: • Rapid (X/Y): 36 m/min (1417 ipm) • Rapid (Z): 30 m/min (1181 ipm) • Cutting feed (X/Y/Z): 10 m/min (394 ipm) • ATC: Ncsdpfxeyk Eyvo Agwjp • Tool shank: MAS BT40 • Pull-stud: MAS 2 • Magazine capacity: 20 tools [optional: 32 or 48 tools] • Max tool diameter with adjacent tools: 90 mm (3.54 in) • Max tool diameter without adjacent tools: 125 mm (4.92 in) • Max tool length: 250 mm (9.84 in) • Tool selection: Memory random • Motors: • Main spindle drive: • 7.7/5.5 kW (10.27/7.5 hp), 30 min/continuous, for 50–1100 min⁻1 • 11/7.5 kW (15/10 hp), 10 min/continuous, for 1101–7000 min⁻1 • Feed motors: X/Y: 3.0 kW; Z: 4.0 kW Dimensions Machine Depth 2380 mm

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, overall weight: 6,200 kg, controller manufacturer: OKUMA, controller model: OSP P200-L, number of axes: 2, This 4-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a main spindle motor of 22 kW. The machine includes a hydraulic and programmable tailstock, a chuck size of 250 mm, and a bar capacity of 75 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 MY machine we have for sale. Contact us for more information. Additional equipment • Spindle oil chiller included • Side chip conveyor (hinged belt type) • Double foot pedal for chuck and tailstock control • Includes transformer, manuals, parts list, and schematics Machine Benefits Technical Machine Benefits • Torque: 620 nm • Spindle nose: a2-8 • Bar capacity: 75 mm Ncsdpfoyaiq Dox Agwsp • Chuck: 250 mm smw autoblok with quick jaw change • Swing diameter: 520 mm • Max turning diameter: 380 mm • Max turning length: 1050 mm • 12-position turret, all driven tools • Turret indexing time: 0. 2 seconds • Equipped with static and driven tool holders Extra Information Tools Automatic tool load monitoring Renishaw automatic tool measurement arm Driven tools motor: 5.5 kW Driven tool speed: up to 4000 rpm Currently in operation

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,790 h, spindle speed (max.): 6,000 rpm, spindle motor power: 11,500 W, number of axes: 2, This Okuma LT2000-2T1MY was manufactured in 2022. It features two 22KW spindles, a 32-station BMT55 turret, and an OSP-P300LA control system with OSP and ECO suites. It includes a Samsys short bar loader, high-pressure pump, and tank. The machine offers 4-axis machining capabilities with Y-axis in the upper turret and is equipped with a 15" color LCD TFT multi-touch screen. If you are looking to get high-quality turning capabilities consider the Okuma LT2000-2T1MY machine we have for sale. Contact us for more information. Additional equipment • 22KW Okuma Spindle Main an Sub • 70mm max Bar Capacity Main Spindle and Bar Feeder Samsys Ncedpfxeyh Ntls Agwep • 2 turrets, each 16 stations, BMT55, live tools • proven and extremely sturdy and stable OSP300 • 80 bar Okuma high pressure package (Japan factory fitted stronger seals), on both turrets. Ideal e.g. for deephole drilling in inox, titanium, inconel. • In excellent conition, geometry very good. Okuma serviced and geometry report upon sale. • Automation: Samsys short bar loader • Extra Features: High-pressure pump & tank, high-pressure seal kit, workpiece removal arm, tool height correction in the Y-axis, coolant tank and pumps, detachable wired handwheel, tool monitoring, programmable face printing, and Hi-Cut Pro for driven tools • two BMT55 revolvers with 16 stations each Machine Benefits Technical Machine Benefits • Features: reduction of machine-related idle times, harmonic speed oscillation, automatic speed synchronization, and remote diagnostics during warranty • Machine hours: 2268 • Z taper: 140 mm • Front bearing diameter: 100 mm • Torque: 183 nm • Y-axis: y-axis in the upper turret with a movement range of +50/-45 = 95 mm • Helical interpolation: available with x/y/z linear axes, including eccentric milling with x/y/c axes • Tool monitoring system • Tool corrections: 96 tool corrections per turret Extra Information • Spindle Orientation: Electronic spindle orientation +/- 0.1 Memory: 2 GB part program memory with a maximum program length of 2 MB Data Management: MacMan machine management with integrated production data acquisition Control Unit Control System: CNC double turning center with a control system featuring OSP suite with numerous apps and ECO suite energy-saving features Display: 15" color LCD TFT with 3D color graphics and a multi-touch screen/panel Operating System: Second Windows operating system for operation and data communication Controller Ports: 2 USB 2.0 ports on the control panel Communication: Ethernet/LAN interface with browser and DNC-T1 for program transfer Turret Tool Stations: Upper and lower turrets each with 16 driven tool stations Motor Power: 5.5 kW per motor Speed Range: 50 - 6000 rpm Torque: 22.5 Nm Number of axes Upper turret: X/Y/Z/C (turret can be used both left and right, of course) Number of axes:Sub-spindle (right): lower turret XZC (turret can be used both left and right) chuck main spindle (left) Hainbuch mini 'Axzug' 65 (pull) Maximum clamping diameter on the main chuck (65 mm) chuck secondary spindle yes, Hainbuch mini 'Axfix' 65 (fixed, ideal for part relay into right hand spindle) Maximum clamping diameter on the main chuck (65 mm) Transformer included Inspection is available from 2023. Machine is in great condition and within geometry Maintenance protocol is available • 2x 22 kW PREX spindle, spindle passage on the left side sufficient for 70 mm bars. Mounted chucks: Hainbuch 65 Axzug and Axfix. • 2x 16-station turret, BMT55, top left with Y

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 935 mm, controller manufacturer: OKUMA, controller model: OSP-P200L, number of axes: 5, This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turn-mill center with a swing over bed of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, toolsetter, and a tool magazine holding 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking to get high-quality turning capabilities consider the Okuma Multus B300-W machine we have for sale. Contact us for more information. • ATC / tool magazine: 40 positions • Toolsetter Ncjdex D Rvhspfx Agwop • Maximum distance between chucks: 900 mm • Maximum turning diameter: 450 mm • Sub spindle: A2-6 nose; 38–5000 rpm • Indexing: C-axis 0.001°; B-axis 0.001° Additional equipment • Barfeeder IF • Approximately 60 HSK 63 tool holders • Half a pallet of soft and hardened chuck jaws • 3 spindle stops (various lengths) • Various collets

Condition: ready for operation (used), Year of construction: 2005, number of axes: 2, This Okuma LVT 300 was manufactured in 2005. It features a stable, precise design with recent upgrades including a new SMW clamping cylinder and chuck in 2020, and a completely overhauled Z-axis with new guideways and spindle. Additional features include an EWAB conveyor for automated parts logistics and extensive tool holders. Consider the opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. • 2020: SMW clamping cylinder replaced • 2020: SMW chuck replaced • Z-axis completely overhauled: new guideways, new spindle • Stable, precise Okuma design Additional equipment • EWAB conveyor for automated parts logistics • Original Mayfran chip conveyor (replaced in 2022) Nodpfoynbdrex Agwscp • Many jaws included • Extensive tool holders included

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 5,000 rpm, travel distance X-axis: 270 mm, travel distance Y-axis: 120 mm, spindle motor power: 22,000 W, total height: 2,330 mm, overall weight: 10,000 kg, product length (max.): 3,530 mm, number of axes: 5, This 5-axis Okuma LT 300 MY was manufactured in 2021, featuring a max turning diameter of 350 mm and a bar capacity of 65 mm. It supports spindle speeds up to 5,000 RPM and includes a motorized 12-position turret. Ideal for complex turning operations, the machine also offers rapid traverse rates and a substantial distance between centers of 1,200 mm. Consider the opportunity to buy this Okuma LT 300 MY horizontal turning machine. Contact us for more information. • Distance between centers: 1,200 mm • Max turning diameter: 350 mm • Rotating diameter over guards: 550 mm • Spindle / counter-spindle: ASA 8 • Bar capacity: 65 mm • Tailstock / counter-spindle travel (W axis): 940 mm • X axis travel: 270 / 230 mm • Y axis travel: ±60 mm Ncjdpfx Agox Imriswsp • Z axis travel (ZA / ZB): 930 / 920 mm • Rapid traverse (X / Z / W): 30 / 40 / 40 m/min • Rapid traverse Y axis: 26 m/min • Turret: 12 positions, motorized, VDI 40 • Turret indexing time: 0.25 s • Live tooling speed / power: 100–4,500 rpm, 7.0 / 3.3 kW

Condition: ready for operation (used), Year of construction: 2007, spindle motor power: 45,000 W, spindle speed (max.): 3,500 rpm, total height: 2,110 mm, overall weight: 7,600 kg, controller manufacturer: OKUMA, controller model: OSP -P200L, product length (max.): 5,330 mm, number of axes: 2, This Okuma LB400-M was manufactured in 2007. A robust turn-mill centre featuring a swing diameter over bed of 620 mm and over saddle of 420 mm. It offers a bar capacity of 80 mm and a chuck size of 400 mm. The spindle operates at speeds up to 3,500 rpm, powered by a 45 Kw motor. Includes a 12-position motorized turret. Contact us for more information about this machine. • Number of axes: 2 + C • Swing diameter over bed: 620 mm • Swing diameter over saddle: 420 mm • Distance between centers: 1,270 mm Ncjdpfoygxccex Agwep • Chuck size: 400 mm • Bar capacity: 80 mm • Turret type: Motorized • Tool stations: 12 positions • X rapid traverse: 20 m/min • Z rapid traverse: 25 m/min • Tailstock spindle taper: MT #5

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5s Okuma MU 6300 V L 5 AXIS was manufactured in 2016. It features a generous X-Axis travel of 1,450 mm and Y-Axis travel of 1,050 mm, providing ample workspace for various machining tasks. With a maximum workpiece diameter of 830 mm and a tool magazine capacity of 64 positions, consider the opportunity to buy this Okuma MU 6300 V L vertical machining centre. Contact us for further details. • A-axis rotation: +90° / -120° Ncsdpfx Aeyia Tljgwsp • C-axis rotation speed: 800 rpm • Distance table–spindle nose: 160–760 mm • Rapid feed (all axes): 50 m/min • C-axis table diameter: 630 mm • Max workpiece size (D × H): 830 × 550 mm • Tool magazine: 64 positions (expandable to 166) Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: OKUMA, controller model: OSP - P300L, number of axes: 4, This 4-axis Okuma LB 3000 EX MYT was manufactured in 2008, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. Consider the opportunity to buy this Okuma LB 3000 EX MYT horizontal turning machine. Contact us for more information. Additional equipment • Bar Loader: Iemca Master mod. 880 33 P/R • Automatic Presetting: Yes • Gear Machining Software and Tools: Yes • Accessories: Chip Evacuator Machine Benefits Technical Machine Benefits Nsdpsyalp Ajfx Agwocp • Max. Workable diameter: Ø 400 mm • Max. Workable length: 500 mm • Type: cnc lathe • Condition: used • State: optimal Extra Information Machine still under power