Used Okuma Mc 60 H for sale (233)

Condition: excellent (used), Year of construction: 2014, CNC Lathe Okuma LU 3000 EX MY 2SC950 Control: OSP-P300 Year of manufacture: 2014 Ksdpfjyluviex Aaljww Max. turning length: 950 mm Max. turning diameter: 340 mm Max. swing over cross slide: 380 mm Max. swing over bed: 580 mm Max. spindle speed: 4,200 rpm Tool holder: BMT 2 tool turrets A turret: 12 tool stations (all driven) B turret: 8 tool stations Tailstock Chip conveyor Hydraulic power chuck B210/A8 Touchsetter High-pressure coolant pump Enlarged coolant tank

Condition: good (used), Year of construction: 2005, The machine has been maintained annually under a service contract with Okuma. Okuma Mac Turn 550 W Year of manufacture: 2005 Control: OSP-E 100 L Max. turning diameter: 720 mm Distance between tailstock tip and spindle nose: 2,505 mm Y axis travel: 250 mm Main spindle speed: up to 3,500 rpm Spindle motor power: 30 kW Lower turret with 12 stations Kjdpfx Asyt Nvtealsww Milling spindle with infinitely variable B axis 80-position tool magazine HSK 100 tool holder 3-jaw chuck, diameter: 315 mm In 2023, the cable carrier for the W axis including all hoses was replaced. In October 2024, the linear guides for X/Y/Z axes were renewed. All work was carried out by Okuma. The machine was cleaned. Covers and sheet metal parts were dismantled. 8th axis dismantled. Travelling column dismantled and removed from the machine. ATC dismantled and removed from the machine. All linear guides removed. Mating surfaces of the ZA axis cleaned. New ZA axis linear guide incl. carriages installed and secured at specified torque. New ZA axis ballscrew incl. bearings installed. Base plate for the travelling column installed and secured at specified torque, respectively fastened to carriages. Lubrication lines connected. ATC including auxiliary components reinstalled and connected. New YA and XA linear guides installed and tightened to specification. New YA axis ballscrew with bearings installed. Travelling column installed and lubrication lines connected. XA base plate installed and aligned. 8th axis installed and aligned. H1 turret mounted - Install drive motor for 8th axis - Assemble 8th axis and new H1, set geometry - Function test for 8th axis and H1 - Run-in program for B axis approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various covers - Install chuck - Adjust zero points - Check tool change

Condition: good (used), Year of construction: 2004, CNC turning and milling center with 9 CNC axes, Okuma Mac Turn 350 W, year of manufacture 2004, OSP-E 100L, 80 WW fac, HSK 63 holder, stepless B-axis as milling spindle, lower 12-station turret with live tooling, Interlite compact filter system 900 l, extraction, spindle hours approx. 18,300 h, chip conveyor, tool changer gripper arm completely renewed, high-pressure cooling, tool measuring arm, tool changer overhauled, main spindle Kitagawa B - 210, sub spindle Kitagawa B - 208. Kedpfx Aaoyt H U Tjloww

Condition: excellent (used), Year of construction: 2008, CNC Lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of manufacture: 2008 Turning length: 750 mm Turning diameter: 430 mm Swing over bed: Ø 670 mm Swing over cross slide: Ø 480 mm Kwedoylkgqspfx Aalow Spindle speed: 42 – 4,200 rpm Tool turret V12 (all stations driven) Equipment: One touch IGF Chip conveyor Touch setter 3-jaw chuck (Kitagawa B212)

Condition: good (used), Year of construction: 2012, CNC Lathe Okuma Genos L200E-M with gantry Control: OSP-200LA-R Year of manufacture: 10/2012 Max. turning length: 380 mm Turning diameter: 200 mm Turning diameter over bed: 450 mm Spindle speed: 107 - 4,500 rpm Spindle bore: 66 mm Turret: M-V12 (VDI) Tool rotation speed: 50 - 6,000 rpm Rapid traverse m/min: X: 20 / Z: 25 Accessories/Equipment Gantry loader type ATPGR-03 Workpiece dimension Ø 20 - 150 mm, max. workpiece weight 2 x 3 kg (double gripper) for OKUMA Genos L200E-M Chip conveyor Touchsetter Hydraulic tailstock Kedpfx Asylkcrsalsww Coolant pump Tool package

Condition: excellent (used), Year of construction: 2011, CNC Lathe Okuma Genos L300E-M incl. bar feeder Samsys M3000SL Control: OSP-P200L-R Year of manufacture: 2011 Turning length: 1,250 mm Turning diameter: 300 mm Spindle bore: 70 mm Turret: 12 positions – all driven Spindle speed: 45 – 4,500 rpm Kwodpjyli T Nsfx Aaljw Toolholder: VDI 40 Accessories/Equipment: - Chip conveyor - 3-jaw chuck Ø 250 mm - Hainbuch collet chuck - Touch setter - Tailstock - Coolant pump - Bar feeder Samsys Multi 3000SL - Various accessories (see pictures)

Condition: excellent (used), Year of construction: 2011, CNC Turning and Milling Center Okuma LT 2000 EX – M Control: OSP-P200LA Year of manufacture: 2011 Swing diameter over bed: 400 mm Center distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Counter spindle speed: 50 – 6,000 rpm Travels: Z-axis: 700 mm W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001) Kwjdpfx Aajyli Akelow Equipment: 2 tool turrets, each with 16 stations (all stations live) Touch setter IGF Chip conveyor Bar feeder 3.00 m Main spindle collet chuck Counter spindle three-jaw chuck Parts catcher Workpiece removal system Extraction unit Coolant system with high-pressure pump and paper band filter system

Condition: excellent (used), Year of construction: 2018, CNC Lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Spindle speed: 45 – 5,000 rpm Tool turret: 12 stations (driven) Tool holder: BMT 65 Spindle bore: Ø 72 mm Equipment: Chip conveyor Parts catcher Kwsdeylhmuopfx Aaljw Touchsetter Programmable sub-spindle One Touch IGF 3-jaw power chuck Kitagawa Various driven and static tools

Condition: used, Year of construction: 2001, functionality: fully functional, OKUMA CNC lathe TL10-M in working condition ATTENTION, WITHOUT THE MIST DUST COLLECTOR! Specifications: - Year of manufacture: 2001 - Control: Okuma OSP-U100L - Chip conveyor - Including several tools Main spindle: - Bar capacity: 50mm - Spindle bore: 53mm - Max. swing over bed: 400mm - Max. turning diameter: 210mm - Turning length: 130mm - Spindle speed: 6000rpm Sub spindle: - Bar capacity: 50mm - Spindle speed: 6000rpm Turrets: - Number of turrets: 2 - Number of stations: 12 - Number of powered stations: 12 - X-stroke: 195mm - Z-stroke: 700mm Accessories: - Mist dust collector not included!!! - CTS (coolant through spindle) in both turrets - Live tooling in both turrets - Chip conveyor - 2 x chuck 200mm - Several tool holders: 11 x single tool holder 20x20 2 x double tool holder 20x20 2 x top tool holder 20x20 2 x round tool holder 16 Kwsdpfsw Swp Esx Aalew 16 x round tool holder 25 4 x live tool holder radial 4 x live tool holder axial - Coolant installation - Machine manuals

Condition: excellent (used), Year of construction: 2023, CNC Turning and Milling Center Okuma Multus B300 II Control: OSP-P 300SA Year of manufacture: 2023 Axis travels: Turning length: 900 mm Max. turning diameter: 630 mm X-axis: 580 mm Y-axis: 160 mm (+80/-80 mm) Z-axis: 935 mm B-axis: 225° (-30° / +195°; 0.001° increments) C-axis: 360° Tool holder: HSK-A 63 Total tool stations: 40 Spindle speed: 50 – 5,000 rpm Equipment: Chip conveyor NC-controlled tailstock, MT5 Kodpfx Asyk Uhcjalsww Touch setter High-pressure coolant pump IKZ 40 Bar Renishaw probe preparation 3-jaw chuck Kitagawa B212 Ø304 mm

Condition: excellent (used), Year of construction: 2013, CNC Turning and Milling Center Okuma Multus B400II-W 2000 Control: OSP-P 300S Year of manufacture: 2013 X-axis: 690 mm Y-axis with travel: 230 mm Z-axis: 2,045 mm B-axis: up to 225°, positioning in 0.001° increments Turning length: 2,000 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 80 stations Equipment: - Collision avoidance system - Tool monitoring system - Tool measurement device - Tool presetting - Subspindle with tailstock function Kwodpfx Asyk Tv Eealew - Renishaw probe - Automatic door - NC steady rest carrier with SMW SLU-Z 3.2 steady rest - ONE touch IGF - Hinged belt conveyor - Main spindle replaced in 2022

Condition: excellent (used), Year of construction: 2014, CNC Turning and Milling Center Okuma Multus U4000 2SW 1500 Control: OSP-P 300 S-H Year of manufacture: 2014 Spindle hours: approx. 2,050 h Travels: X-axis: 695 mm Y-axis travel: +150/-150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Spindle mounting: HSK 63 Total tool stations: 40 Accessories: XA and YA axes equipped with direct absolute measuring system (Okuma ABSO-Scale) In-process measurement with Renishaw probe for X/Z axes Measurement in Y-axis including angled axis measurement Kitagawa B215A11 max. 2,800 rpm Kitagawa B210A8 max. 4,200 rpm Kitagawa F 2596-H01 hollow chuck cylinder Ø96 mm One-Touch IGF Kwodpfx Aajyk Tq Aeljw Multi-function tool software Harmonic spindle speed vibration control Simultaneous 5-axis machining software package Chip conveyor Coolant tank with 70 bar high-pressure pump

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 710 mm, turning diameter: 710 mm, spindle motor power: 11,000 W, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 690 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, spindle nose: JIS A2-8, overall weight: 14,000 kg, tool length: 300 mm, tool weight: 10 g, travel distance W-axis: 1,550 mm, Equipment: documentation/manual, Turn mill center OKUMA Multus B400 TECHNICAL CHARACTERISTICS: CNC control: OSP-P200L Distance between centers: 1500 [mm] Max. cutting diameter: 710 [mm] Height of centers over cariage: 710 [mm] Stroke X axis: 690 [mm] Stroke Y axis: -115 / +115 [mm] Stroke Z axis: 1545 [mm] Stroke W axis: 1550 [mm] B axis indexing precision: 0.001 [°] Milling head max. speed: 6000 [rpm] Max. milling spindle power: 11 [kW] Max. milling spindle torque: 65.7 [Nm] Coolant milling head: HSK-A63 Tool magazine capacity: 40 Max. tool length: 300 [mm] Max. tool diameter: 130 [mm] Max. weight of single tool: 10 [Kg] Rapid traverse rate X axis: 4000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 26000 [mm/min] Rapid traverse rate W axis: 12000 [mm/min] Spindle nose: JIS A2-8 Min. spindle speed: 38 [rpm] Max. spindle speed: 3800 [rpm] Increment C-axis: 0.001 [°] Supply voltage: 400 [V] Weight: 14000 [Kg] INCLUDED EQUIPMENT: Kwedeyqx Rzopfx Aalew 1 × One-Touch IGF software option 1 × ATLING 2-point steady rest, type AX8I-NAOS (Ø85–360 mm) 1 × SMW AUTOBLOK 3-jaw chuck Ø340 mm, type KNCS-N-340-117 1 × Chuck clamping pressure regulator 1 × Parts catcher 1 × NC tailstock 1 × MARPOSS T18 tool probe 1 × Remote electronic handwheel 40 × HSK-63 tool holders 1 × 2-color status signal lamp 1 × Chip conveyor 1 × Coolant tank 1 × Transformer 1 × Complete set of manuals + OKUMA CD Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to brands such as Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron, and Biglia. Also includes lathes, mill-turn machines, and milling machines.

Condition: excellent (used), Year of construction: 2019, CNC Lathe Okuma LB 3000 EX II-MYW 800 Control: OSP-300LA Year of manufacture: 2019 Distance between centers or spindle noses: 1,085 mm Swing diameter over cross slide / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm C-axis travel: 360 mm W-axis travel: 895 mm Main spindle speed: 45 - 5,000 rpm Sub spindle speed: 45 - 6,000 rpm Spindle mounting: BMT 60 Tool turret: V12 (driven) Kedpfx Aaeyk Tbholoww Equipment: Chip conveyor One Touch IGF Touch setter Main spindle Hainbuch Ø 65 mm Sub spindle SMW Autoblok KNCS-N 170-43 Coolant system HMF-980 with paper band filter Bar loader / robot interface prepared

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, CNC Lathe Okuma LU 3000 M2SC 1000 / Demonstration Machine Control: OSP-P300LA Year of manufacture: 2023 Spindle hours approx. 50 h Turning length: 1,000 mm Turning diameter: 340 mm Spindle speed: 5 - 5,000 rpm Tool system: VDI 40 2 tool turrets A turret: 12 tool stations, all driven B turret: 8 tool stations Tailstock Chip conveyor 3-jaw chuck Kitagawa B210 Touchsetter T Kwodsyk Sf Sspfx Aalow One Touch IGF Handwheel on control panel

Condition: good (used), Year of construction: 1987, operating hours: 25,000 h, functionality: fully functional, turning diameter over cross slide: 550 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 90 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 10 rpm, spindle motor power: 22,000 W, total length: 4,510 mm, total width: 2,370 mm, quill stroke: 150 mm, overall weight: 9,500 kg, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Well-maintained LC40 for sale. The machine is powered and available for inspection. 12-position turret. Includes: 2 pcs. 3-jaw chucks, 240/330mm, various tools and accessories (see pictures), measuring probe, Mayfran chip conveyor. Kwedpfxeyvulgj Aalew

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Maximum turning diameter: 2000 mm Maximum turning length: 1400 mm Control: Okuma OSP - P300 SA Maximum workpiece weight: 10,000 kg Maximum workpiece dimensions: 2000 mm x 1400 mm Chuck diameter: 2000 mm C-axis positionable to 0.001° Tool spindle traversable in X/Y/Z and indexable in B Kwsdpfx Asywg Aaoalew B-axis swivels up to 150° Y-axis travel: 1600 mm (+/- 800 mm) Coolant supply through tool spindle Automatic double pallet changer Tool stations: 60 pcs, HSK 100

Condition: used, OKUMA LB 2000 EX is a CNC turning lathe designed for precision, high accuracy and reliability. Capacities: spindle hole 62 mm; max turning length 300 mm; max turning diameter 430 mm; travels Z 350 mm, X 260 mm. Specs: rapid traverse Z 30 m/min, X 25 m/min; stepless spindle 50–6000 t/min; power 50 Hz 3x 400 V; weight ≈3250 kg; dimensions L1900×W1750×H1850 mm. Equipment: 12-position turret. Capable of tight tolerances; typical applications: automotive, aerospace, medical, watchmaking, machine tools. Kwedeyn Ehbspfx Aalsw

Condition: used, OKUMA LB 200 M is a CNC turning lathe for high‑precision machining, accuracy and reliable operation. Capacities: turning Ø over cross‑slide 420 mm; swing over bed 530 mm; spindle hole 53 mm; max Ø 300 mm; travels Z 335 mm, X 180 mm. Specs: rapid traverse X 25 m/min, Z 30 m/min; spindle speeds 50–6000 t/min; 3x400 V 50 Hz; total power 16 kVA; weight ≈3300 kg; dims 2035×1720×1700 mm. Equipment: 12‑position fixed‑tool turret; tailstock Morse 4, spindle stroke 80 mm, Ø 55 mm. Enables tight tolerances; typical sectors: automotive, aerospace, medical, machine building. Kwedpsyn Eg Rjfx Aaljw

Condition: used, OKUMA LB 10 II M is a CNC turning lathe, engineered for precision, high accuracy and reliability. Capacities: swing over cross‑slide 340 mm, over bed 480 mm, max turning Ø 170 mm, spindle hole 51 mm, max length 300 mm, bar passage 42 mm; travels Z350/X150 mm; rapid Z20/X15 m/min. Turret 12 pos., 12 driven tools; C‑axis res. 0.01°; spindle 50–6000 t/min; voltage 3x400 V 50 Hz; weight ~3400 kg; footprint 2000×1640×1780 mm. Accessories: lamp, coolant system, bar feeder, chip conveyor. Enables tight tolerances; suitable for automotive, aerospace, medical, watchmaking and precision machine tool applications. Ksdpfxjyn Egws Aaleww

Condition: excellent (used), Year of construction: 2014, CNC Turning and Milling Center Okuma Multus U4000 1SC 1500 BigBore Control: OSP-P 300S Year of manufacture: 2014 X-axis: 695 mm Y-axis travel: +150/-150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments Turning diameter: 650 mm Turning length: 1,500 mm Spindle interface: Capto C6 Total tool stations: 80 Equipment: - NC tailstock - Travelling hydraulic steady rest AX 5 on NC axis - Coolant system with band filter - Kitagawa BB 212-11 hydraulic 3-jaw chuck - Automatic tool touch setter - High-pressure coolant system (IKZ) - Software option High Cut Pro (High-accuracy package with Super Nurbs) Kedpfsyk Ddgsx Aalsww - CAS collision avoidance system - Main spindle orientation, electric - Multitool with turning function for Y-axis - Helix function - Automatic main power shut-off - DNC-DT interface - Machining Navi M-i (milling), speed control to minimize vibration - One-Touch IGF - Chip conveyor

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Kodpfx Ajxzgkioaleww Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning diameter over cross slide: 650 mm, turning length: 1,750 mm, turning diameter: 650 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 2,040 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Kwsdpfxoxzi D Ss Aalow Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: used, Year of construction: 2001, turning diameter 80 mm turning length 800 mm control OSP-U100L Ksdpfxeymgcdj Aaloww total power requirement 22 kW weight of the machine ca. 6,3 t

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, turning length: 1,000 mm, turning diameter: 350 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, CNC Lathe Manufacturer: Okuma Model: LB15 II-M 1SC-1000 Year of Manufacture: 1996 Control: OSP-7000L Country of Origin: Japan Delivery: Ex-stock Machine Features - Long turning length - Tailstock - Chip conveyor - Live tooling - One touch - IGF - Touch setter Technical Specifications - Working Areas - Swing diameter: 340 mm - Max. turning diameter: 350 mm (chuck work) - Max. turning length: 1000 mm Travel Distances - X-axis: 260 mm Kodpoyrtkrofx Aaleww - Z-axis: 1020 mm Spindle - Speed: 45~4500 rpm - Standard spindle bore diameter: 62 mm - Spindle front bearing bore diameter: 100 mm - Chuck passage: 52 mm Turret - Number of stations: 12 - Tool holder: VDI40 - Indexing time station to station: 0.1 sec Feed Rates - Rapid traverse X/Z: 15,000/20,000 mm/min Tailstock - Quill diameter: 90 mm - Quill stroke: 120 mm Main Drive - Spindle motor: 15/11 kW Machine Dimensions: approx. 3315 x 1895 mm Machine Height: approx. 1905 mm Weight: approx. 5700 kg Optional - Transport organization and handling - Machine installation and setup - Commissioning of the machine