Used Oil Painting On Wood for sale (23,087)

Condition: good (used), DEBAG Monsun Twin deck oven – bakery oven – 8 decks, year of manufacture 2012, oil-fired. Used, self-dismantling required. Guedpjyz Rc Sefx Afcoa Manufacturer: DEBAG • Model: Monsun Twin • Year of manufacture: approx. 2012 • Version: multi-deck/deck oven (approx. 8–10 decks) • Fuel type: heating oil • Control: digital control system available • Complete exhaust system and technology included

Condition: used, sanding height 150 mm Gsdeyz Dfajpfx Afceua 390 mm Sanding paper width 400 mm engine tba KED Type XXIII II4 single wood sanding machine for sanding and calibrating solid wood individual parts and smaller workpieces. The machine is suitable for precise sanding work in carpentry and furniture making and enables uniform surface finishing. Its robust construction makes it suitable for continuous use in woodworking.

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Position 2: spraying machine SCM-BRAVOROBOT P1 Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Position 5: Ovens SCM-BRAVOROBOT P1 Gjdpew Idbysfx Afcjua

Condition: used, Year of construction: 2023, tank capacity: 100,000 l, GENERAL Equipment: Venting/air release Design: Horizontal Year of manufacture: 2023 Notes: Manhole diameter approx. 600 mm; includes optical leak detector, tank fitting for heating oil, overfill prevention device, and ladder with working platform; External diameter: 2,900 mm Total length: 16,050 mm Heating/cooling: present Location: External storage Minden Technical documentation: Drawing, various documents Nameplate: Volume: 100,000 liters Product-contact material: Steel Condition: used Cylindrical length: 14,960 mm Last application: Heating oil Gusdpfx Afeyckwqjcoa TANK Support type: Saddles welded on HEATING/COOLING JACKET Internal temperature control: Immersion heater EQUIPMENT Manhole / dome: on the tank

Condition: ready for operation (used), Fully Equipped Water-Based Paint Factory Sale or lease of the entire site or individual plant components - Over 50 mixing and stirring tanks (stainless steel) Gusdpsyknlusfx Afcja - 5 horizontal ball mills (including Netzsch ZWM 88) for fine dispersion - Extensive dispersing, dissolver, and transfer systems - Tank farm with tanker and container unloading - Filling lines for small and large containers - High-bay warehouse with approx. 2,300 pallet spaces - Container cleaning system - Laboratory, workshop, office, and social areas - Complete utilities, cooling, ventilation, and safety technology (EX design) The existing infrastructure allows for flexible utilization – from immediate production start-up and capacity expansion to project-based or temporary usage concepts. This makes the site attractive for both strategic buyers and lessees/tenants. Further details, technical specifications, and layout plans available on request.

Condition: used, axle configuration: 3 axles, first registration: 03/2006, total length: 11,200 mm, total width: 2,550 mm, total height: 3,400 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2006, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels = Notes = Gusdpfx Aoxvxgxjfcja Number of axles: 3, Unladen weight: 6,400 kg, Gross weight: 34,000 kg, Chassis type: Complete chassis, Chassis material: Stainless steel, Kingpin size: 2 inch, Alloy wheels, Suspension type: Air suspension, ABS, EBS, Body year: 2006, Sidewall material: Insulated, Drum volume: 34,000, Compartment division: 1 compartment, Type of cargo: Heated liquids, Axle type: BPW = Further Information = General Information Cab: Day cab Registration: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre tread left: 6 mm; Tyre tread right: 6 mm Axle 2: Tyre tread left: 8 mm; Tyre tread right: 7 mm Axle 3: Tyre tread left: 9 mm; Tyre tread right: 9 mm Weights Curb weight: 6,400 kg Payload: 27,600 kg Gross vehicle weight: 34,000 kg Environment Emission class: Euro 0 Condition General condition: Moderate Technical condition: Moderate Optical condition: Moderate Damage: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European makes, years of manufacture, and price classes. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good prices • Professional conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates are arranged quickly • Expert technical services • The security of 'recognizable quality' • And much more... Please visit our website for special offers and our full stock: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an enquiry via our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 1998, operating hours: 1,329 h, fuel type: diesel, motor manufacturer: Yanmar, Field of application: Construction Drive: Wheel Empty weight: 3.380 kg Number of owners: 1 Technical condition: good Visual appearance: good Drill equipment: Tank, Control Panel, Steel canopy Production country: NL Please contact Michael Overmeer for more information = Additional options and accessories = - Control Panel Godpfjygwfiex Afcoua - Steel canopy - Tank = Remarks = Atlas-Copco with 1.329 operating hours mounted on a trailer year of construction december 1998 with a hydraulically operated light tower (9 meters), hydraulic support legs and a hydraulic nose wheel. Changes and typographical errors reserved.

Condition: used, empty load weight: 4,390 kg, maximum load weight: 13,610 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2018, color: black, Year of construction: 2018, operating hours: 171,224 h, mileage: 171,224 km, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69815 Doll, tandem * Year of manufacture: 2018 * ABS (Anti-lock Braking System) * Duomatic air coupling * 15-pin connector plug * Gross vehicle weight: 18,000 kg * Unladen weight: 4,390 kg * Payload: 13,610 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Manufacturer: BEFA Belziger Fahrzeugbau * Wabco Smartboard * 50 mm towing eye * Coupled at top * Short timber trailer with 4 bolsters and ExTe stakes * 3x protective bolsters * Steel frame cover * Wabco Smartboard, 171,000 km Disclaimer: Subject to alterations, prior sale, and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Handling all (export) documentation * Ordering export / customs number plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing Gedpfx Ajyz Ihfsfcjua * TÜV inspections, registration service * Transfer of commercial vehicles Speak to our well-trained staff – we are happy to advise you.

Condition: used, Regoplas RT50 Thermo oil temperature control unit Thermo oil up to 300'C Gusdpfx Afodmn E Hjcsa

Condition: excellent (used), functionality: fully functional, PALLET CRUSHING LINE : 2 Shredder 2 conveyors with magnetic drum for nail removal. Godpfx Asyvhi Eofcsua Used only 200 hours AMIS shredder and 30 hours RUBUST shredder. Like a new and good price.

Condition: excellent (used), Year of construction: 2002, operating hours: 46,357 h, functionality: fully functional, Oil-free screw compressor Atlas Copco GA75VSDFF Inverter and dryer integrated. 160 kW 7.5 bar 27.90 m3/min Year of manufacture: 2002 Gsdeyz R U Iopfx Afcjua Operating hours: 46,357

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle Gjdpfx Afou T Hrpeceua - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: new, A device for storing and feeding logs onto a sawmill table. The systematic material feed to the saw increases its efficiency and eliminates the need for additional personnel. Dimensions: Width: 800–2000 mm Height: 800 mm Length: 4000–12000 mm (longer option) Log length: 1000–2500 mm Log diameter: 100–400 mm Feed speed: adjusted to the incoming feeder LOG FEEDING Guedpfxswavrce Afcja A device for storing and feeding logs onto the table of a gang saw. The targeted material feed to the gang saw increases its efficiency and eliminates the need for additional personnel. Dimensions: Width: 800-2000 mm Height: 800 mm Length: 4000-12000 mm Log length: 1000-2500 mm Log diameter: 100-400 mm Feed speed: Adapted to the feed rate

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Gjdpfx Aoyw Ndmsfcjua Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: used, Year of construction: 2020, functionality: fully functional, power: 13 kW (17.68 HP), input voltage: 380 V, input frequency: 50 Hz, For Sale: Format 4 Creator 950 – Vertical CNC Machining Center Due to the recent acquisition of Noordzee Interieur and the subsequent consolidation of our workshops, we currently have a duplicate CNC machine. That is why we are offering our Format 4 Creator 950 for sale. The machine needs to be cleared from our workshop in the short term. The Creator 950 is the renowned, compact vertical machining center from Format 4 (Felder Group). It is ideal for safe, efficient, and space-saving CNC drilling and milling. Simply insert the panel and the machine does the rest, without the need to set up large vacuum tables. Specifications & Details: - Brand & Model: Format 4 Creator 950 - Type: Vertical CNC Machining Center - Serial Number: 341.09.001.20 - Year of Manufacture: 2020 - Condition: Used, but in excellent and fully functional condition. Additional Information: An excellent opportunity for an interior fitter or woodworker looking for a reliable, space-saving CNC machine on short notice. Serious buyers are welcome to visit our workshop [in Middelkerke / or alternative location] for an inspection. Feel free to contact us for more information or to schedule an appointment! Asking Price: €53,620 Included per unit: - Second reference cylinder, on X-axis, positioned deeper in the machine for processing long workpieces - Machine support tables (front and rear) with air cushion system - Pick-up position * Only available on Advanced and Premium - 4-position linear tool changer, also suitable for aggregates * Not with tool length measurement * T001668 * Only on Advanced Gedpfsyv Eu Eox Afcoua * On Premium free of charge instead of T001662 - UPS – Uninterruptible power supply for the machine PC, ensuring safe shutdown and data storage in case of power failure. Serial Number: 341.09.001.20 – 341.09.001.20 The Format-4 Creator 950 (Advanced, 2020) comes standard with a 9.0 kW spindle motor. Total electrical connection: 13 kW.

Year of construction: 2005, operating hours: 4,205 h, condition: used, 2005 | Westeria WindSifter on tracks | Used Screen | 4205 hours 📍Location: Belgium 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 43000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Guodpfxoyaikks Afcoa 👷‍♂️ Inspected by an independent expert 72 inspection points 56 approved ✅ 15 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good, machine was in working condition at the time of inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "35089 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Wood band saw, band saw machine, band saw, vertical band saw, bone saw, table saw, bone band saw, butcher's saw -Manufacturer: Reich, band saw, table saw with stand Gsdpfjyvrd Tox Afcoua -Motor: Dietz 0.8 kW -Cutting width: max. 200 mm -Cutting height: max. 275 mm -Saw blade: Length 2200 mm -Dimensions: 830/720/H1715 mm -Weight: 114 kg

Condition: used, heavy-duty copy lathe, used, in good condition, with extensive accessories, including disc grinding attachment. Manufacturer MVM, model T1500. Centre distance approx. 1450 mm, centre height approx. 220 mm. Manual copying device. 8 speeds 700 – 3100 rpm, stepless. Motor 2.5 kW. Space required approx. 2700 x 800 x 1500 mm. Weight approx. 500 kg. Location: 97447 Gerolzhofen, loaded free, unpacked. Delivery in as-inspected condition, without guarantee or warranty. Gusdpsy Ay A Refx Afcsa

Condition: used, Used olive oil production line with output capacity of 7 tons/hour. The equipment was made by Pieralisi in 2004 with last production run December 2025. Guedpfxsyhc Tzo Afcsa Major equipment includes: - Leaf remover - Olive washing machine - Olive crusher - 700 litre Malaxer Panorama - 1000 litre Malaxer Panorama - Electric panels - Decanter centrifuge Elephant S 470/2 - Vibrator filter for Elephant S 470/2 - Decanter centrifuge Jumbo 2 - Decanter centrifuge Major 3 - Vibrator filter for Major 3 - Separator 1500-2000 Full equipment list on request.

Year of construction: 2011, condition: used, Make: B&M, Year of manufacture: 2011, Part size: 1,200 x 800 x 400 mm, comprising: 4 painting robots, paint dryer, heat medium natural gas, max. temperature 100°C, exhaust air volume flow 1,500 m³/h, circular conveyor system by Hero, batch of load carriers, control and switch cabinets, preparation and supply racks, platform system, stairway access, accessories. Guedpfex Ry Rdsx Afcea +++ Attention: Machine is part of an online auction! +++

Year of construction: 1987, condition: used, machine/vehicle number: 29990, Volume flow: 300 cm³ Overpressure: 231 bar Max. volume flow at 25 DH/min: 7.5 l/min Inlet overpressure or required air pressure: 7 bar Air consumption: 9,7 l/DH Weight: 100 kg Space requirement: 1250 x 750 x 1400 mm Guodpfxobnpc Uj Afcea

Condition: ready for operation (used), Year of construction: 1983, machine/vehicle number: 3601, Saw blade diameter: 300 mm Gjdpfxeyh Hn Hs Afcoua Saw blade speed: 2800 rpm Cutting capacity at 90°: 70 x 120 or 50 x 140 mm Mitre stops left and right: 15/22.5/30/45°, any intermediate position lockable Drive motor: 380 V, 2.2 kW Weight: 50 kg

Condition: good (used), For butylene extruder / Lisec (pump with new seals) Guodpsy Alabjfx Afcsa External dimensions: Width: 420 mm Height: 250 mm Depth: 250 mm Weight: approx. 5 kg Condition: good, second-hand

Condition: used, Year of construction: 2012, 2012 | Palfinger P260B (26m) on Nissan 3.5 ton | Used Truck-Mounted Boom Lift | 52089 kms 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 47200 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Guodpfx Afsyyp S Nscsa 👷‍♂️ Inspected by an independent expert 59 inspection points 59 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very good working truck , Well kept and serviced all functions work propperly , very good for his age 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40604 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 1981, machine/vehicle number: 2383, table size: 630 x 500 mm saw blade diameter: max. 250 mm curring height: 77 mm Gusdpfxeb H Infe Afcoa saw blade rotations: 6300 rpm electric drive: 380 V, 2,2 kW space needed: 800 x 680 x 840 mm