Used Newton 25 for sale (15,091)

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Rodpsw A Amrefx Aa Usp Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device Rodpfx Ajhrakvsa Uep - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: excellent (used), mileage: 1,215 km, fuel type: diesel, color: grey, mast type: telescopic, Year of construction: 2016, operating hours: 66 h, General Information Year of manufacture: 2016 Purpose: Construction Drivetrain Drive: Wheel Functional Mast: Telescopic (4 sections) Mast length: 38.5 m Lifting capacity: 25,000 kg Superstructure brand: ZOOMLION QY25V51.5 25 TONS CRANE Condition Rjdpfxjuu Dh Es Aa Uop Technical condition: Very good Visual condition: Very good Financial Information Price: On request

Condition: good (used), functionality: fully functional, Press Brake Brand: AMADA Rjdpfx Aswivddea Uep Model: HFT 80/25 Capacity: 2500 x 80T 4 axes Distance between uprights: 1800 mm Dimensions: 3500 x 1500 x 2100 mm Weight: 6,500 kg Equipped with new and used tooling

Condition: good (used), Electromechanical actuator for valves, valve drive, actuator, servo motor, air flap actuator, air flap actuator motor, gas pressure regulator, electro-hydraulic drive -Manufacturer: Deufra, electric actuator, rotary actuator -Type: ASP 25 -Voltage: 400 V / 0.03 kW Rsdpfjyik Uyjx Aa Ujp -Dimensions: 490/310/H175 mm -Weight: 15.6 kg

Condition: ready for operation (used), Screening machine GFA 25/60-3 Brand: GFA Type: ASS Surface:  length 6000 mm, width 2500 mm – 3 Decks Rodsi A Aytepfx Aa Uop Upper Deck: screen opening [] 15 mm Middle Deck: screen opening [] 8 mm Lower Deck: screen opening [] 4 mm Driving: 37 kW E-motor Incl.: Springs.

Condition: good (used), Year of construction: 1997, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, vacuum pump type VT 4.25 -Drive: AEG 0.75 kW / 1420 rpm -Volume flow rate: 25 m³/h -Suction pressure: -850 mbar -Quantity: 1 pump available Rodpergtd Refx Aa Uop -Dimensions: 490/250/H300 mm -Weight: 31 kg

Year of construction: 2002, operating hours: 1,378 h, condition: excellent (used), Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump Redpfsyf Itnsx Aa Usp – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

Condition: used, Storage location: Nattheim Rjdpevvi E Nefx Aa Uep

Condition: used, Storage location: Nattheim Rsdpovvi Haefx Aa Ujp

Condition: good (used), functionality: fully functional, Year of construction: 2014, operating hours: 6,856 h, load capacity: 2,500 kg, lifting height: 6,040 mm, free lift: 1,850 mm, fuel type: electric, mast type: triplex, construction height: 2,750 mm, battery voltage: 80 V, DGUV certified until: 02/2027, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25 electric forklift with the following specifications: Operating hours: 6,856 Lifting capacity: 2,500 kg Lift height: 6,040 mm Overall height: 2,750 mm Year of manufacture: 2014 Redpfx Aajyhp Hus Ujp STILL 2.5 tonne electric forklift truck with full cabin, triplex mast with full free lift, side shifter, 4th valve, good battery, four levers, single-pedal control, roadworthy lighting (compliant with German StVZO), fork length 1,200 mm, charger included. Price includes service per STILL manufacturer's specifications and valid UVV (accident prevention regulation) inspection upon sale. The following options are available at an additional cost: - New rear tires - Cosmetic reconditioning Inspection, demonstration, and test drive are available by prior telephone arrangement. Sale is exclusively to business customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). More information and further offers are available on our website!

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,090 h, load capacity: 2,500 kg, lifting height: 3,680 mm, free lift: 150 mm, fuel type: electric, mast type: other, construction height: 2,480 mm, battery voltage: 80 V, DGUV certified until: 02/2027, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25 Electric Forklift with the following specifications: Operating hours: 3,090 Lifting capacity: 2,500 kg Lift height: 3,680 mm Overall height: 2,480 mm Year of manufacture: 2017 STILL 2.5 ton electric forklift with full cabin, telescopic free lift mast, side shifter, good battery, good tires, fingertip controls, roadworthy lighting according to StVZO, fork length 1,100 mm, charger included. Price includes service according to STILL manufacturer specifications and valid safety inspection (UVV) at the time of sale. The following options are available at an additional cost: - Optical reconditioning - Different fork length Inspection, demonstration and test drive available by appointment by phone. Sale exclusively to commercial customers. Subject to prior sale, errors and typographical mistakes. We can deliver your new forklift cost-effectively with our own loading ramp low-loader (transport costs on request). Rjdpfsyhpz Esx Aa Uop For more information and further offers, please visit our website!

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 25 mm throat 255 mm Rodpfx Aaowqr Ibe Ujp bore stroke 135 mm spindle turning speed range 8, von 105-2900 U/min table-size 500 x 350 mm column diameter 100 mm spindle taper MK 3 total power requirement 0,65 / 0,9 kW weight of the machine ca. 190 kg dimensions of the machine ca. 0,5 x 0,5 x 1,7 m Unused exhibition machine at a special price: New gear machine, 2-stage right/left rotation, height-adjustable drilling head, Construction principle "Arboga - Sweden", maintenance-free gearbox with helical teeth Wheels, drill head and table are adjustable 360 degrees around the column,chip protection with electr. Switch, drilling depth indicator. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Condition: new, weight max. in kg 2500 kg Working height minimal 350 mm Working height maximum 1850 mm max. torque 3000 Nm 0 1 U/min adjustment speed vertikal 560 mm/min vertical adjustment 1500 mm baseplate diameter 600 mm rotation movement 0,75 kW stroke drive 1,85 kW height of the plant 2505 mm weight 1160 kg Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation. Due to its special design, the column positioner can process very large components. Higher columns (+500/+1000/+1500 mm) for processing components with larger dimensions are available. Special equipment: Double-sided lifting drive, guide rails in 2 m segments, wireless handheld control unit, TCS program control, etc. Thanks to the movable columns, the length of the different workpieces can vary between 1 m and over 20 m. Depending on the weight and dimensions of the component, positioners with load capacities of max. 2,500 kg to max. 40,000 kg are available. Advantages: Improved Safety Proper Ergonomics Improved weld quality Cost savings and profit increase Welding/Assembly procedures repeatability Rodpfxsvw Du Uj Aa Uop Machine Features: Master and idler column with rotating mounting plates Pallet jacks for column lifting and relocating Servo-motor, ball screw and encoder control for Up & Down motion Servo-motor, gear reducer and encoder control for Rotation LCD display for positioning set up, safety thresholds setting and diagnostic Automatic load leveling Redundant safeties - servo motor brake, ball screw thread geometry and mechanical Stopper Low maintenance 240/480/600 Volt - 3 phase - 60 Hz In order to configure the system precisely to meet the requirements, we must obtain all relevant information about the workpieces to be processed for the manufacturer's technical office. There we have a list of questions for this purpose.

Condition: new, Year of construction: 2024, sheet width 1020 mm plate thickness 2,5 mm distance between columns 1045 mm Redpfxjwgn Ams Aa Usp daylight opening max. 47 mm bending angle max. 135 ° weight of the machine ca. 290 kg dimensions of the machine ca. 1,35 x 0,86 x 1,17 m Unused exhibition machine at a special price: Sengmentable upper rail, upper clamping foot-operated, manual bending clamping operate. The bending performance refers to 380 N/mm² strength. This is an exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Year of construction: 2012, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, overall weight: 7,600 kg, spindle motor power: 32,000 W, number of axes: 3, Horizontal transfer machine manufactured in 2012. This PFIFFNER HW 25-12 features a 12-station indexing rotary table and can accommodate up to 18 machining units. With a maximum clamping diameter of Ø 25 mm and a workpiece length of 100 mm, it offers versatile capabilities. Consider the opportunity to buy this PFIFFNER HW 25-12 machine. Contact us for further details. • Number of stations: 12 • Indexing rotary table: 12-station • Indexing time: 0.5 sMachining units • Horizontal machining units: max. 12 • Vertical machining units: max. 6 • Total machining units: max. 18Workpiece and clamping • Clamping system: Collets • Collet type: W 25 • Max. clamping diameter: 25 mm • Max. workpiece length: 100 mmElectrical data • Voltage: 3 × 400 V • Current: 3‑phase AC • Frequency: 50 Hz • Control voltage: 24 VControl system • Machine control base: Siemens SIMATIC S7 • Interfaces: AS‑i, PROFIBUS • Prepared for CNC axes expansion • Optional teleservice for remote diagnosticsCooling and hydraulics • Coolant system capacity: 850 L • Coolant (filled): approx. 800 kg • Hydraulic unit (empty): approx. 250 kg • Hydraulic oil: 150 LWeights (approx.) • Base machine: 3,000 kg Rsdpfxsyi Efij Aa Uop • Electrical cabinet: 700 kg • Coolant system (empty): 1,600 kg • Pedestal: 300 kg Additional equipment • Loading magazine (empty): 800 kg

Condition: good (used), Code: 0311 Brand: CIT MECCANICA Model: V 25 / KS Fully automatic and very precise sharpening and setting machine for band saw blades (normal and spaced teeth) and for sharpening for circular saw blades Technical features Minimum pitch of saw teeth 2 mm Rjdpfx Aasynkt Ae Uep Maximum pitch of saw teeth 20 mm Maximum width of bandsaw blades 50 mm Minimum diameter of circular blades 110 mm Maximum diameter of circular blades 600 mm Grinding motor 0,12 Kw Main motor 0,20/0,25 Kw Teeth sharpened per min 35 and 70 Diameter of emery wheels 175 mm Speed of grinding wheel 3000 rpm Gear-box oil SAE 30 1,5 Kg Weight 115 kg

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Redpfx Aow Nklhea Usp Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, Year of construction: 2023, operating hours: 497 h, lifting height: 4,700 mm, fuel type: diesel, power: 38 kW (51.67 HP), Empty weight: 4.290 kg Lifting capacity: 2.500 kg Rental currency: EUR Please contact KEY-TEC Sales for more information Redpfxoyh Tzts Aa Uep

Condition: used, maximum load weight: 34,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2026, loading space length: 7,650 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, total width: 2,550 mm, total height: 3,100 mm, Year of construction: 2024, Equipment: ABS, 3-axle SCHWARZMÜLLER aluminum half-pipe tipper semi-trailer 25 cbm First registration: 04/2024 Mileage: 49,490 km Internal dimensions (LxWxH): 7,650 x 2,330 x 1,470 mm Unladen weight: only 5 t Loading height: 3,100 mm Fifth wheel height: 1,200 to 1,250 mm Aluminum trough in semi-circular segment construction Continuous 6 mm floor plate Wall thickness also 6 mm plus additional 6 mm aluminum wear plates in the rear area, approx. 3,500 mm long, continuously welded External aluminum tailgate, without discharge chute Automatic mechanical 2-hook central locking High-pressure front-mounted HYVA cylinder, 250 bar Roll-over tarpaulin with central locking Chassis: steel frame Crank landing gear WABCO trailer EBS with RSS anti-sway protection SAF axles with large 430 mm disc brakes, reinforced off-road version 1st axle: lift axle Speed-limited traction aid (Traction Help Plus) Automatic tipping lowering system Tyres: 6 x 385/65 R 22.5 Aluminum air tanks Tire pressure monitoring with sensors in wheels, display in driver's cab Full LED lighting Redpjylr Ucofx Aa Uep 2 additional LED reversing lights RENTING is the new BUYING—available immediately from us with full-service rental or leasing.

Condition: used, Year of construction: 1995, turning diameter 150 mm turning length 1250 mm control OSP 7000 L Redpfsyi Hwtex Aa Usp total power requirement 37 kW weight of the machine ca. 8500 t

Condition: good (used), Year of construction: 2016, operating hours: 17,155 h, Forklift LINDE E25L triplex 450 full free lift/side shift/fork positioner/extendable BATTERY 2021! Year: 2016 Rjdpfx Aasx Hr Rhe Ujp Continuous stock, see our website. Prices ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and in AS-IS condition with no warranties (see our general terms and conditions). For a viewing and/or test drive, you can make an appointment without obligation. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: excellent (used), Year of construction: 2024, operating hours: 86 h, lifting height: 3,400 mm, fuel type: diesel, mast type: duplex, fork length: 1,400 mm, front tire size: 12.5/80-18/12, rear tire size: 27X10-12, total height: 2,150 mm, total length: 4,190 mm, total width: 1,450 mm, color: other, Year of manufacture: 2024 Front tyre size: 12.5/80-18/12 Rear tyre size: 27X10-12 Lifting capacity: 2.500 kg CE mark: yes Registration number: T-59-GJD Manitou MC 25-4 Building year: 2024 Rodpow Uffgofx Aa Uep Working hours: 86 h Engine: Kubota 37KW Weight: 4068 kg Lifting height: 3.4 mtr Closed height: 2,15 mtr Mast: Duplex Capacity: 2500 kg Drive: 4x4 CE certified Price is excluded VAT Machine from our rentalfleet. (still in rental) For more pictures and productvideo look at our website Good working condition

Condition: used, pressure 25 t stroke 500 mm throat 355 mm dayligth 800 mm table surface area 500 x 500 mm Rjdjylcknspfx Aa Usp table height over floor 700 mm ram surface 250 x 250 mm power requirement 7,5 kW Weight 2,1 t dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm hole in the table 180 mm SPECIAL DEAL as is where is, as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: good (used), Year of construction: 2008, fuel type: electric, fork length: 1 mm, Empty weight: 4.585 kg Lifting capacity: 2.500 kg CE mark: yes Technical condition: good Visual appearance: good Transport dimensions (LxWxH): 2,38x1,3 Production country: DE Please contact Christian Theißen for more information Manufacturer: Still Model: RX 60-25 Year of build: 2008 Condition: Used Data: Max. lifting height: 3,65 m Max. Lifting capacity: 2500 kg Length forks: 1,25 m Drive type: Electric Rodpfsx Hhcgsx Aa Uep Domensions LxW (without forks): 2,38 x 1,30 m Building height: 2,73 m Own weight: 4.585 kg Special features: Side slider, protective roof, windshield Location: 41468 Neuss immediately available