Used Newton 25 for sale (15,091)

Condition: used, Paint mist extraction, water irrigated system - Producer Reinox - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW Redpfsumvtqox Aa Uop - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 2,500 kg, empty load weight: 141 kg, construction width: 1,200 mm, Fork carriage Load center: 600 Rodpfx Aajynhg Ts Usp ISO class: ISO class 3 = 2,500 - 4,999 kg Technical condition: New Description: used DURWEN bolt-on fork carriage Capacity: 2,500 kg/600 mm load center Body width: 1,200 mm Lug spacing: 980 mm Mounting: truck side ISO II, load side ISO III Weight: 141 kg Section thickness: 44 mm Projection: 80 mm Paint: RAL 7021 Incl. Durwen adapter frame

Condition: used, functionality: fully functional, machine/vehicle number: E857T02516M, Year of construction: 2014, operating hours: 752 h, load capacity: 2,500 kg, fuel type: electric, construction height: 1,500 mm, fork length: 2,360 mm, empty load weight: 1,310 kg, total length: 3,910 mm, drive type: Elektro, construction width: 795 mm, Low Level Order Picker Chassis Number: E857T02516M Load Center: 1200 Fork Width: 185 mm Fork Thickness: 60 mm Transmission: AC drive control Condition: Ready for operation and fully functional Technical Condition: Good Front Tyres Type: Vulkollan Redeyng Rwepfx Aa Uep Front Tyres Size: 254 x 90 Front Tyres Condition: 80 - 100% Rear Tyres Type: Vulkollan Rear Tyres Size: 85 x 90 Rear Tyres Condition: 80 - 100% Battery Voltage: 24V Battery Capacity: 620Ah Battery Manufacturer: Hoppecke Aquamatic Battery Type: PzS Battery Year: 2014 Battery Condition: 80 - 100% Description: Start via key switch, standard version, battery withdrawal from above, lift/lower toggle on tiller head, standard display.

Condition: good (used), bending force (max.): 60 t, working width: 2,500 mm, Max. pressing force 60 tons Total working width 2500 mm Working width between columns 2050 mm Throat depth 210 mm Redpfx Aoymguyoa Uop Transport dimensions: length 260 cm width 120 cm height 210 cm weight approx. 4 t Note: The information on this page has been obtained and assembled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we advise you to verify all relevant details. Financial information VAT/margin: Margin: The displayed price includes VAT (VAT not deductible for business customers)

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Height Redpfx Aasrr Ui Rs Usp 2000 mm weight 1500 kg

Condition: used, Year of construction: 1989, centre distance 2000 mm 600 weight of the machine ca. 3,2 t Passage 49 mm Digital Lynette Redpfeyi Hvvex Aa Ujp

Condition: used, functionality: fully functional, machine/vehicle number: 0012, Year of construction: 2005, load capacity: 1,800 kg, lifting height: 5,200 mm, fuel type: electric, mast type: triplex, drive type: Elektro, High-lift order picker Chassis number: 0012 Load center: 600 Rodeym Hk Uspfx Aa Uop Mast type: Triplex Condition: Ready for use and fully functional Technical condition: normal Front tire type: Polyurethane Rear tire type: Polyurethane Battery type: PzS

Condition: used, functionality: fully functional, operating hours: 4,950 h, fuel type: electric, drive type: Elektro, tractive force with load: 25,000 N, Tractor Condition: Ready for use and fully functional Technical condition: Good Redpfx Aaoym E U Es Uop Front tires: Type: Superelastic Front tires: Condition: 60-80% Rear tires: Type: Superelastic Rear tires: Condition: 60-80% Battery: PzS Battery: Condition: 60-80%

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation Rjdowga Hwopfx Aa Uep - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) Redpfxowgaqpj Aa Ujp - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons Redjwga Etopfx Aa Ujp - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.

Condition: new, Bernardo Bench Drill DMT 25 Technical Specifications - Drilling capacity max.: 25 mm - Tapping capacity max.: M20 - Morse taper: MT 3 - Spindle speed (5 steps): 340 – 2180 rpm - Throat depth: 240 mm - Max. distance spindle/table: 355 mm - Distance spindle/baseplate: 670 mm - Quill travel: 135 mm - Column diameter: 85 mm - Table size / T-slot size: 252 x 252 mm / 14 mm - Working area baseplate: 365 x 305 mm Rodpfx Aaeyamz Hs Uop - Motor output (S1 100%): 1.1 kW / 400 V - Motor input (S6 40%): 1.5 kW / 400 V - Machine dimensions (W x D x H): 500 x 820 x 1260 mm - Weight: approx. 184 kg Features • Safety guard according to CE standard, adjustable for each drill length • Machined worktable, height adjustable via rack-and-pinion with hand wheel • Ground baseplate with T-slots for securing large workpieces • Adjustable drilling depth stop for precise quill positioning • Guaranteed spindle run-out accuracy ≤ 0.02 mm measured in the quill • Powerful drive motor, suitable for continuous operation • Robust, high-performance drill presses for heavy-duty use • Includes automatic reversing for tapping operations Scope of Delivery • Key-type drill chuck 5 – 20 mm / B 22 • Drill chuck arbor MT 3 / B 22 • Reducing sleeve MT 3 / MT 2 • Tapping device • LED machine lamp • Height-adjustable safety guard

Condition: good (used), mileage: 745,372 km, power: 346 kW (470.43 HP), first registration: 03/2018, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 6x2, wheelbase: 6,570 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, number of seats: 2, total length: 9,120 mm, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, parking air conditioner, power mirror, soot filter, spoiler, trailer coupling, General information Cab: Globetrotter Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Transmission Transmission: Volvo i Shift, 12 gears, Automatic Axle configuration Make axles: Volvo Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 9000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle 1: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Rear axle 2: Tyre size: 385 / 65 / R22.5; Lift axle; Max. axle load: 7500 kg; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: air suspension Weights Empty weight: 13.000 kg Carrying capacity: 15.000 kg Rsdpeylu Thefx Aa Uop GVW: 28.000 kg Functional Crane: VDL S-25-6600, year of manufacture 2018, behind the cab Interior Interior: grey Environment Emission class: Euro 6c Maintenance APK (MOT): tested until 09/2026 Condition Technical condition: good Visual appearance: good Number of keys: 3 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19845, Year of construction: 2020, The forklift is a returned lease vehicle. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller does not accept liability for this information. The operating hours are based on the status as of April 2025; additional hours have accrued since then. TECHNICAL DETAILS Lifting height: 19,065 mm Load center: 1,220 mm External turning radius: 6,000 mm Overall height: 10,490–19,710 mm Side clamps Sideshift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Rsdpfxjyly Ecs Aa Usp Total weight: 44,900 kg Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Electrical system: 24 V CAN bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rear-view mirrors (high mounted) Variable piston pumps with return flow filter (10 µm) Joystick control with power steering Pressure accumulator for lift mast (60 bar / 2 liters) LED lighting (position, indicator, work, and rear lights) Cab (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm 3 wipers, ventilation, opening side windows Electric 24V socket (10A), internal rear-view mirror, coat hook Duplex mast 6/7: lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side twin-spreader 20–40", with hooks and side clamps Central lubrication system 'Lincoln' Reversing camera (MOTEC, 6.7" color display, heated lens) Fire extinguisher (6 kg, mounted externally on the left) Tyres: Size: 14.00 x 24" / PR24, Manufacturer: Michelin XZM Operating manual, driver’s handbook, spare parts catalogue

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19846, Year of construction: 2020, The forklift is a returned lease vehicle. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller does not accept liability for this information. The operating hours are based on the status as of April 2025; additional hours have accrued since then. TECHNICAL DETAILS Lifting height: 19,065 mm Load center: 1,220 mm External turning radius: 6,000 mm Overall height: 10,490–19,710 mm Rjdpfx Aoyly Dxja Ujp Side clamps Sideshift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Electrical system: 24 V CAN bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rear-view mirrors (high mounted) Variable piston pumps with return flow filter (10 µm) Joystick control with power steering Pressure accumulator for lift mast (60 bar / 2 liters) LED lighting (position, indicator, work, and rear lights) Cab (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm 3 wipers, ventilation, opening side windows Electric 24V socket (10A), internal rear-view mirror, coat hook Duplex mast 6/7: lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side twin-spreader 20–40", with hooks and side clamps Central lubrication system 'Lincoln' Reversing camera (MOTEC, 6.7" color display, heated lens) Fire extinguisher (6 kg, mounted externally on the left) Tyres: Size: 14.00 x 24" / PR24, Manufacturer: Michelin XZM Operating manual, driver’s handbook, spare parts catalogue

Condition: new, functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm Redpfx Asrg Ebcea Uep - With cooling rollers (200 mm wide) - Winder / haul-off - Control system

Condition: used, Year of construction: 2003, operating hours: 2,560 h, machine/vehicle number: Z452503-21961, fuel type: diesel, Weights Empty weight: 7.323 kg Functional Mast: articulated arm Rjdpfx Asyh T Aqea Uop Lifting capacity: 227 kg Working height: 1.600 cm Other information Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Max. horizontal reach: 765 m Transport dimensions (LxWxH): 6.7x1.7x1.95 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2024, operating hours: 369 h, lifting height: 3,200 mm, fuel type: electric, mast type: duplex, total height: 2,200 mm, total length: 2,400 mm, total width: 1,160 mm, color: other, Year of manufacture: 2024 Empty weight: 5.355 kg Lifting capacity: 2.500 kg Supply voltage: 80 V CE mark: yes Technical condition: very good Visual appearance: very good General Country of production: Germany Condition CE type: CE Young used Linde E25H-600 with the following options: Side shift, Panoramic roof, LED Strips front and rear Bluespot 620 AH Battery Built-in charger Rsdpfx Aoyl Ndbsa Ujp

Condition: excellent (used), Year of construction: 2020, operating hours: 4,162 h, lifting height: 3,700 mm, fuel type: diesel, mast type: triplex, power: 37 kW (50.31 HP), motor manufacturer: Kubota, total height: 2,100 mm, total length: 3,100 mm, total width: 1,450 mm, color: other, Year of manufacture: 2020 Empty weight: 4.470 kg Engine type: Kubota D1803 CRT E5B Lifting capacity: 2.500 kg CE mark: yes Technical condition: very good Visual appearance: very good Drivetrain Rjdjyl Inlepfx Aa Uep Internship / Tier: Stage IIIA / Tier IV interim General Country of production: France Condition CE type: CE

Condition: used, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 12/2013, loading space length: 13,350 mm, loading space width: 2,500 mm, loading space height: 2,100 mm, Equipment: ABS, We are very pleased that our offer has captured your interest and can already assure you that you will be able to purchase a high-quality, attractively priced vehicle with a verifiable service history from us! Rjdpfsyca Rmsx Aa Uep GERMAN VEHICLE REGISTRATION / EXPORT SERVICES We organize registration and export documents for you, including EUR 1 and manufacturer’s declaration for export purposes. FINANCING Upon request, we are happy to provide you with a leasing, hire-purchase, or financing offer. SERVICE TÜV inspections / UVV tail lift test / LGS inspection / tachograph calibration / installation of OBU units and servicing by our authorized workshop. TOLL / ROAD CHARGES Toll registration can be arranged on site. TRAVEL / DISTANCES Wittlich train station – 500 m Frankfurt Airport – 150 km Frankfurt-Hahn Airport – 40 km Luxembourg Airport – 75 km Sale subject to our Terms and Conditions. The details provided online are non-binding descriptions and do not represent guaranteed specifications. The seller assumes no liability for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 Wittlich-Wengerohr.

Condition: used, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 12/2013, loading space length: 13,350 mm, loading space width: 2,500 mm, loading space height: 2,100 mm, Equipment: ABS, We are very pleased that our offer has captured your interest and can already assure you that you will be able to purchase a good and reasonably priced vehicle with a verifiable service history from us! Rear portal damaged / Roller door GERMAN VEHICLE Rjdpfxeyca Rto Aa Ujp REGISTRATION / EXPORT SERVICES We organise your registration and export documents / EUR 1 certificate and manufacturer’s declaration for export. FINANCING Upon request, we are happy to provide you with a leasing, hire-purchase, or financing offer. SERVICE Main inspection (TÜV), accident prevention (UVV LBW), tail lift inspection (LGS), tachograph calibration, installation of on-board units, and full service available through our authorised workshop. TOLL / ROAD FEES Toll booking possible on site. TRAVEL / DISTANCES Wittlich train station: 500 m audist Frankfurt Airport: 150 km Frankfurt-Hahn Airport: 40 km Luxembourg Airport: 75 km Sale in accordance with our General Terms and Conditions. The information provided online constitutes non-binding descriptions and does not represent guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, Year of construction: 1994, INDEX MS 25E Max. bar diameter round / square: 26 / 18 mm Redpfx Aaoymdchj Uop Spindle pitch circle diameter: 230 mm Max. bar feed: 100 mm Longitudinal slide travel (total / working / adjustment): 85 / 50 / 330 mm Cross slide travel (total / working / adjustment): 36 / 16 / 20 mm Spindle speeds (12 / 24 steps with 1.25 / 1.12): 366 – 5,020 rpm Main drive: 15 kW / 1,450 rpm Voltage: 400 V / 50 Hz Operating hours: 62,283 h Working hours: 4,916 h Dimensions (incl. bar guide): approx. L x W x H approx. 7 x 1.5 x 2 m Weight: approx. 6 t Scope of delivery: Machine INDEX MS 25E

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 254 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,150 mm, empty load weight: 4,290 kg, drive type: Diesel, construction width: 1,155 mm, Diesel forklift Load centre: 500 Mast type: Triplex Technical condition: very good Front tyres type: superelastic Front tyres size: 7.00-12 12 Rear tyres type: superelastic Rear tyres size: 6.00-9 10 Rsdpfx Aaevla S Eo Uep Sideshift, 3rd valve, 4th valve, rear work lights, heater, soot filter, full cabin, full free lift, CE certificate, safety light,

Condition: used, functionality: fully functional, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, fork carriage width: 1,038 mm, drive type: Diesel, Diesel forklift Mast type: Triplex Technical condition: New Front tires type: Superelastic Front tires size: 7.00-12 Rear tires type: Superelastic Redpfxevla Sxj Aa Uop Rear tires size: 6.00-9 Load protection grid, 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, soot filter, full free lift, CE certificate, Image may be used as a symbol

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz Rodsdzqmzepfx Aa Uop - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.