Used Newton 25 for sale (15,103)

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: 01x shelf connector, used for shelf distance: 250 mm total length: 250 mm cross section: U 35x25 mm material thickness: approx. 2,00 mm material color: sendzimir galvanized Rsdpemqk Svofx Aa Ujp Drill hole diameter: 11 mm Weight: 0,330 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: 01x shelf connector, used for shelf distance: 360 mm total length: 360 mm cross section: U 35x25 mm material thickness: ca. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Rodpfx Aasmqldkj Usp Weight: 0,480 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 4.450 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Rsdpfxoidcg Aj Aa Ujp material thickness: approx. 2,00 mm

Condition: as good as new (ex-display), Used High Pressure Concrete Nailer HN 25 C2 MAX Powerlite The HN25C2 is a compact nailer for concrete and steel, allowing you to work as close as 6 mm from the edge, making it ideal for tight corners. Its main area of application is work on metal stud framing. The nose of the HN25C2 is compact, meaning you can also work with thin metal profiles. With special nails, it can penetrate steel up to 5.0 mm thick or drive nails into concrete with a compressive strength of 60 N. Technical specifications: • Operating pressure: 12–25 bar • Nail length: 15–25 mm • Magazine capacity: 100 nails • Air consumption: 1.6 ℓ/cycle at 18 bar operating pressure • Weight: 2.0 kg The nailer was used for demonstration purposes and is therefore classified as used. It is in perfect technical condition. Supplied in a transport case with user manual. Redeyizrfepfx Aa Ujp For further details, please refer to the pictures. You will receive an invoice with VAT shown separately. Payment in advance (bank transfer) only – no PayPal! Collection from our shop is of course also possible. Shipping by UPS – shipping costs €8.90. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, mileage: 19,000 km, power: 164.75 kW (224.00 HP), first registration: 12/1998, fuel type: diesel, axle configuration: 4x4, wheelbase: 3,600 mm, fuel: diesel, color: red, driver cabin: other, gearing type: mechanical, Equipment: additional headlights, all wheel drive, differential lock, fog lights, trailer coupling, truck registration, MAN TLF 16 / 25 bodywork Metz, all-wheel drive Crew cabin for 1 + 5 Differential locks around 19,000 km First registration 12 / 1998 Rjdewhfl Uspfx Aa Usp 2400L tank Light mast at front wall of body Perimeter lighting Roof box Storage for power/lighting Snow chains PA cabin S-attack hose reel Branch guard Martin siren system Front flashers New inspections (roadworthiness/emissions/safety) available upon request at extra cost Price upon written enquiry -Sale only to authorities and commercial customers-

Condition: good (used), DEMAG hook block / crane hook / hook - 3 pieces Rodpfx Asu T Skdja Usp Demag - 2,5 ton - 1 piece Demag - 6,3 ton - 1 piece Demag - 25 ton - 1 piece

Condition: new, DEMAG hook block / crane hook / hook ( new ) Redpfju T Slnjx Aa Ujp Demag - 10 ton - 2 pieces are available. Demag - 20 / 25 ton - 2 pieces are available.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 3,245 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: electric, mast type: simplex, construction height: 2,400 mm, fork carriage width: 1,250 mm, fork length: 600 mm, empty load weight: 4,050 kg, total length: 2,950 mm, drive type: Elektro, construction width: 1,650 mm, Four-way Side Loader Load centre: 350 Fork width: 125 mm Fork thickness: 40 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Rjdpox Ixkksfx Aa Ujp Condition: Ready for operation and fully functional Technical condition: Very good Front tyre type: Polyurethane Front tyre size: Non-marking Rear tyre type: Polyurethane Rear tyre size: Non-marking Battery voltage: 48V Battery capacity: 775Ah Battery manufacturer: Habat Battery year: 2013 Description: In addition to this Bulmor model, we have around 200 heavy-duty forklift trucks, compact forklifts, conventional forklifts, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Hire purchase & financing on favourable terms are always available. We are also happy to purchase your used equipment outright, even if you are not buying a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to give you detailed advice on this EMU 25 ST GT N. LK6,7. P.S.: Our master forklift workshop specialises in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tons upwards. We can also offer consignment sales for your vehicle. Platform height: 380 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 103100 € 1948.59 € 2550 mm 25 mm 25 mm 20 mm 20 mm 16 mm 350 mm 350 mm 260 mm 1,5-5 m/min 22 kW 5500 mm 2000 mm 1900 mm 13000 kg 4 rolls Redpfxoynm Eus Aa Uop fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: excellent (used), Year of construction: 2015, operating hours: 16,722 h, fuel type: electric, total height: 1,910 mm, color: other, GVW: 4.880 kg Lifting capacity: 16.000 kg Redpfx Aaoyf Utbo Ujp Battery 80V 4PzS 620Ah 2022 with water filling system, 380V high frequency charger, SE rear tires 80%, NEW SE front tires, Plastic covers 100% in order!

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: TGL, pressure tester -Pressure range: 0 to 25 bar -Case dimensions: 330/200/H140 mm -Weight: 3.6 kg Rodpfxoycczuj Aa Usp

Year of construction: 2017, condition: like new (used), Manufacturer: Nabertherm (Germany) Redpfxsx Encwe Aa Usp Model: NRA 25/06 Year of manufacture: 2017 Serial number: 211983 Condition: Used, in excellent technical condition (has been serviced) Equipment: Fume extraction hood, built-in recirculation fan Technical Specifications Working chamber dimensions (W×D×H): 225 × 500 × 225 mm Usable chamber volume: 25 liters Maximum temperature: up to +650 °C Temperature uniformity: ±5 °C within the working area External dimensions (W×D×H): 750 × 1700 × 1800 mm Control system: Controller P470, with data logging (NTLog Basic, USB) Gas system: Use of protective gas possible (inert/reactive) Vacuum: Operation under vacuum possible, final pressure down to 5 mbar Cooling: Water cooling for door (connection of a system required) Construction: Stainless steel housing, retort made of steel 1.4571, fan for uniform temperature distribution The machine can be inspected near Gießen by appointment. We will load onto your truck. The buyer is responsible for transport. Technical data, accessories, and description of the machine are non-binding.

Condition: refurbished (used), Série n° 30 389 Machine reconstruite avec : - Moteur des avances et vitesses broches AC - PLC Siemens Simatic HMI - Armoire électrique neuve siemens Rsdpfx Aajir Imce Uep - Porte barre et son support - 6 tubes d'avance - 6 tubes de serrage - Appareillages en option - Machine au normes C

Condition: new, The CT 25 (Ø 0.2 to 2.5 mm) replaces and/or complements the 25TS, which operates with a cam system. This machine has between 11 and 16 axes, details of which are given below: - 8 independent slides - wire feed - nozzle rotation - servo spinner OR lateral movement of winding finger Optional (up to 5 additional axes) - servo cutter - servo spinners (additional) - lateral movement of winding finger - transfer for raising the second (German-type) extension spring eye. Maximum feed speed: 121 m/min. Slide travel: 50 mm Rsdpfxovbd Ezj Aa Usp Machine dimensions: 1.30 x 1.46 x 1.68 m. Machine weight: 900 kg. If you have any further questions, please do not hesitate to contact us.

Year of construction: 2017, condition: as good as new (ex-display), • Technical products + speed control • Suitable for pipes from 4.5 up to 25 mm OD Rsdpfxevzq R Rs Aa Uop

Condition: like new (used), Year of construction: 2008, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 2800 x 1000 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mmY axis traverse: 1000 mmZ axis traverse: 1500 mm Milling head Head type: Auto-indexing head UDG (every 2,5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 22 kW Feedrates Feedrates: 5000 mm/minRapid feedrates (X-Y-Z): 20000 mm/min Weight and dimensions Maximum weight on table: 6000 kgMachine weight approx.: 20000 kgMachine dimensions approx.: 7750 x 4400 x 3100 mm Accesories GuardingNew automatic tool changer: ATC-30Longitudinal rear chip conveyorElectronic handwheel: HR-410External coolant and high pressure through spindle Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features Rodpfx Aeyf Rtwoa Uop

Condition: like new (used), Year of construction: 2006, Retrofitted: 2025 Rsdpoyf Rtqofx Aa Uep Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 2800 x 900 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mmY axis traverse: 1000 mmZ axis traverse: 1000 mm Milling head Head type: Universal Auto-indexing UDG (2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 22 kW Feedrates Rapid feedrate (X / Y-Z): 20000 mm/min   /   12000 mm/min Weight and dimensions Maximum weight on table: 4000 kgMachine weight approx.: 14500 kgMachine dimensions approx.: 7367 x 5070 x 2803 mm Accesories Perimetral guardingAutomatic tool changer: ATC30Chip conveyor: rear longitudinalExternal coolant high pressure coolant through spindleElectronic handwheel: HR-420 Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features

Condition: good (used), Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm Redorw Dalspfx Aa Usp -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 25 mm Rsdpfxjdg Snio Aa Ujp -Load capacity: 2000 kg -Number: 1x terminal available -Weight: 14 kg

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Redpfx Aouddh Aja Usp Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: used, machine/vehicle number: 008319, X axis working area: 6380 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Rsdpfjx A Tc Iox Aa Uep Total number of tool changer positions: 32

Condition: good (used), functionality: fully functional, roll diameter: 25 mm, roll width: 25 mm, roll pitch: 28 mm, total width: 35 mm, total height: 35 mm, total length: 2,475 mm, conveying length: 2,475 mm, construction width: 35 mm, construction height: 35 mm, Item sold as a bundle of 100 pieces. TAF item number: 1000004157 Manufacturer: unknown Year of manufacture: unknown Overall dimensions (LxWxH) in mm: approx. 2,475 x 35 x 35 Side width in mm: 35 Side height in mm: 25 Conveyor length in mm: 2,475 Conveyor width in mm: 25 Roller type: plastic Rollers per axle: 1 piece Rsdpfx Asxrt Hfja Ujp Roller pitch in mm: 28 Roller diameter in mm: 25 Drive: gravity Weight in kg: 1.85 Condition: used / fully functional Function test: OK

Condition: good (used), Year of construction: 1987, fabric-no. 202 395 working length 2550 mm output 2000 KN tracking travel 13 mm safety distance 176 mm Rsdpfxoq Awh Ro Aa Uop

Condition: used, Year of construction: 1990, pressure 25 t total power requirement 4 kW 200 mm inward space Redoxzk S Depfx Aa Ujp

Condition: used, Year of construction: 2018, operating hours: 5,575 h, lifting height: 4,000 mm, fuel type: diesel, motor manufacturer: Volvo-Diesel, Lifting capacity: 25.000 kg Please contact Sales Team for more information Redpfeydm Hwjx Aa Uop