Used Nef 400 for sale (19,004)

Condition: good (used), Year of construction: 2003, functionality: fully functional, overall weight: 225 kg, faceplate diameter: 400 mm, DIVIMEK Meca DCN-400 NC rotary table Previously used on a Hedelius machine with Siemens 840D control Fully functional Iedpfxszn Iv Ho Afueih Includes ROD encoder Available for immediate delivery

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 800 mm, wire diameter (max.): 0.33 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis +GF+ AGIECHARMILLES CUT 400 Sp was manufactured in 2014. It features an impressive X/Y/Z axes travel of 800 mm x 550 mm x 510 mm and U/V axes travel for tapering of 800 mm x 550 mm. The machine can handle workpieces up to 1300 mm x 1000 mm and 3000 kg in weight. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AGIECHARMILLES CUT 400 Sp machine we have for sale. Contact us for further details. Iedpfxoz Hwnys Afueih - Overall Dimensions (L x W x H): 2670 x 2870 x 2645 mm- Total Weight without Dielectric: 6300 kg- Total Weight with Dielectric: 8040 kg- Max Noise Level: 76 dB- Sliding Door: Yes- Worktable Dimensions: 1240 x 800 mm- Max Workpiece Dimensions: 1450 x 900 x 510 mm- Max Workpiece Weight: 3000 kg- Max Dielectric Level: 520 mm- Axis Travel X, Y, Z: 800 x 550 x 510 mm- Axis Travel U, V: 800 x 550 mm- Taper Angle / Height: ±30°/510 mm (Option ±45°/510 mm)- Taper Tapering Kit: Kit for 45° taper cut (Kit für 45° Konikschnitt)- Measurement Resolution X, Y, U, V, Z: 0.05 µm- Axis Speed: 0...3000 mm/min- Dielectric Type: Deionized water- Dielectric Total Volume: 1700 L- Dielectric Temperature Control: Automatic setting ±1°C- Filter Cartridges: 4- Cooling System: Water / Water heat exchanger- Wire Diameter: Ø 0.2...0.33 mm- Standard Wire Guides: Closed guides Ø 0.25 mm- Wire Guide Set: Taper Expert Ø 0.250 mm (for CUT X00/FI X4)- Automatic Threading: Yes- Permissible Wire Spool Weights: 8-25 kg- Generator Type: CLEANCUT- Three-Phase Input Voltage: 380/400 V ±10%- Mains Frequency: 50 or 60 Hz- Max / Required Power: 12 kVA- Min Roughness: Ra 0.2 µm (carbide) / 0.28 µm (steel)- User Interface: AC CUT HMI- Operating System: Windows XP- Display: 15" LCD- Connectivity: E-Connectivity, Ethernet, USB- Operating Ambient Temperature: 15...30 °C (20 ± 1 °C for optimal precision)- Max Relative Humidity: 40...80%- Compressed Air: 6-7 bar

Condition: good (used), Year of construction: 1988, functionality: fully functional, Burkhardt & Weber portal milling machine, year of manufacture 1988 / overhauled in 2008, Siemens Sinumerik 840 D control system, travel range X/Y/Z 4000 / 2800 / 800 mm, dual pallet changer, clamping area 1810 x 3025 mm, vertical clearance 1220 mm, horizontal clearance 2250 mm, 173-position tool changer / tool magazine, two-stage gearbox, swivel boring and milling head, high-pressure coolant system, Iodsz Tnzxepfx Afujih chip conveyor, 3D measuring probe.

Condition: excellent (used), For sale: Industrial electric motor by renowned manufacturer KSB Aktiengesellschaft. The motor is in good technical condition and fully operational. It features a robust construction and is designed for demanding industrial applications. Technical specifications: Manufacturer: KSB Type: 1LA7163-4AA66-ZX77 Power: 11 kW Supply: 3~ 400/690 V Frequency: 50 / 60 Hz Speed: 1460 rpm (50 Hz) Protection class: IP55 Insulation class: F Mounting: IM B35 (flange + feet) Cos φ: approx. 0.84 Weight: approx. 85 kg Iiedjz Sluhopfx Afush Condition: Used Fully functional Normal signs of use (visible in the photos) Good condition

Condition: good (used), Year of construction: 2007, Drying oven, drying cabinet, chamber dryer oven, preheating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet, universal oven Iisdpsz Tfc Tofx Afush -Manufacturer: Delair, Drying cabinet universal oven type SPX ED-400-TC -Usable space: 500/4070/525 mm -Heating power: 2000 W -Nominal temperature: 50 - 300°C -Voltage: 230 V -Dimensions: 760/720/H915 mm -Weight: 87 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Kaltenbach KBS 400 NA metal bandsaw, automatic (2020) Manufacturer: Kaltenbach Type: KBS 400 NA Year of manufacture: 2020 Condition: used, very good, operational Bandsaw blade (mm): 5,730 x 41 x 1.3 mm Motor power (kW): 4 Cutting speed (mm/min): 15-90 Bandsaw blade feed rate (m/min): 0-300 Swivel range: 115° Round stock 90°: 350 mm Round stock 45°: 350 mm Square stock 90°: 400x350 mm Square stock 45°: 315x350 mm Working height: 720 mm Weight: 3600 kg CNC-controlled cutting angle adjustment Separately driven chip brush Automatic material feed gripper with a stroke length of 2,600 mm for single stroke Hydraulic blade tensioning Electronic bandsaw blade slippage monitoring Isdpfjzww Ausx Afuoih

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 20 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, feed rate X-axis: 27 m/min, working width: 400 mm, warranty duration: 12 months, power: 2.5 kW (3.40 HP), Achieve flawless coating results on wood, MDF, and other flat materials with the Soest Roller Coater. Ideal for furniture, flooring, and panel production, it ensures consistent finish quality and high production efficiency. Iiedsxuh T Eopfx Afush Suitable for applying water-based, UV, LED oil, lye, stain, or lacquer. The RC-L model is specially configured for lacquer applications, featuring dosing and application rollers with blades and a reversible dosing roller. Alternative roller types or the RC-L blade system can be supplied upon request. Contact us for a quotation or visit our Test Center for a live demonstration.

Year of construction: 2011, condition: used, Rated current: 95A, connected load: 53kW, an on-site inspection is possible. Iijdpfxoz S Ivaj Afuoh

Condition: used, mileage: 603,000 km, first registration: 09/2026, fuel type: diesel, fuel: diesel, color: other, gearing type: automatic, Year of construction: 2013, Axle 1: left 14 mm right 14 mm Axle 2: left 7-7mm right 7-7 mm Iiodpfx Afszzi Rroush Axle 3: left mm right mm

Condition: excellent (used),

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, working width: 230 mm, planing height: 120 mm, spindle diameter: 40 mm, spindle speed (min.): 8,000 rpm, Weinig Powermat 400 4 Spindles 230 x 120 mm All Powerlock with 8000 rpm Iijdpfxsz Dvh Hs Afuoh Feed speed 5–30 m/min Bottom 7,5 kW Right + Left combination motor 11,0 kW Top 11,0 kW Radiale CNC controlled setting of width and height in combination with Memory System Infeed table 2,5 m Automatic Waxilitpump Memory System

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, saw blade diameter: 400 mm, cutting range round steel at 45°: 130 mm, cutting range round steel at 90°: 130 mm, overall weight: 2,500 kg, cutting range square steel at 90°: 120 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16, 2026, and November 26, 2026! The machine has been completely overhauled and repainted! TECHNICAL DETAILS Round material at 90°/45°: 130 mm Square material at 90°: 120 mm Profiles at 90°: 300 × 45 mm Profiles lying at 45°: 220 × 60 mm Profiles standing at 45°: 80 × 120 mm Saw blade: 400 × 4 × 50 mm Saw blade mount: 50/4 × 14/80 mm Iisdsz Il Hyepfx Afuoh Saw motor: 3.7/4.5 kW Cutting speed: 1,750/3,500 m/min Saw blade feed: 0–3,700 mm/min Rapid return of saw blade: 4,500 mm/min Short-stroke clamping device stroke: 8 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 20 A Dimensions & Weight Dimensions (L x W x H): 7,500 x 1,200 x 2,000 mm Weight: 2,500 kg EQUIPMENT Workpiece clamping with short-stroke clamping device Hand crank for pre-setting Horizontal clamping cylinder at the front Minimum lubrication instead of a coolant mist spray system Feed roller track T3 Rollers of the feed roller track: 60 × 289 mm Starting section of the roller track, length 2,000 mm, with 5 rollers Stand for roller track Mounting bracket Extension of the roller track, length 2,000 mm, with 4 rollers Stop roller, adjustable as a guide for material bars Length measuring device Discharge roller track T3 External Reference: Steinbach & Holler - Lot 39

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 70,000 W, spindle speed (max.): 14,000 rpm, travel distance X-axis: 450 mm, overall weight: 32,000 kg, controller manufacturer: SIEMENS, controller model: 840D solution line, number of axes: 5, This 5-axis Weingartner Pick Up 400 machining center for screw manufacturing was manufactured in 2023. It features a maximum workpiece length of 4,000 mm and a maximum workpiece diameter for milling of 180 mm. The machine is equipped with a Siemens 840D control system and offers advanced simultaneous machining capabilities. If you are looking to get high-quality screw manufacturing capabilities, consider the Weingartner Pick Up 400 machine we have for sale. Contact us for further details. • Control: Siemens 840D solution line (NCU 720.3), OP19 touchscreen + Siemens TP700 touch panel • Simultaneous machining: 5-axis; B‑axis turning Isdpsz D Efhofx Afusih • Workpiece capacity: max length between centers 4,000 mm; max diameter for milling 180 mm; chuck size Ø260 mm • Power supply: 3 × 400 V / 50 Hz; main fuse approx. 200 AAxes • X: travel 450 mm; rapid 20 m/min • Y: travel −80 / +150 mm; rapid 20 m/min • Z: rapid 25 m/min • B: swivel range ±45°; max swivel speed 90°/s; clamping torque 5,000 Nm • C: max speed 50 rpm; max torque 1,740 Nm (cont.) / 2,580 Nm (40% duty) • W (tailstock slide): rapid 15 m/min • VZ1 / VZ2 (steady rest slides): rapid 15 m/minTurning / Milling Unit • Unit: UFE-400; tool spindle: MDFK • Power: 45 kW (continuous) / 70 kW (40% duty) • Max spindle speed: 14,000 rpm; nominal speed: 1,560 rpm • Torque: 275 Nm (continuous) / 430 Nm (40% duty) • Tool interface: HSK 100‑T (compatible HSK 100‑A / HSK 100‑T); additional interface: Capto C8 • Internal coolant: 80 bar; 20 l/minTailstock • Hydraulically operated quill; diameter 190 mm; stroke 200 mm; Morse taper MK6Machine equipment / configuration • Front and rear self-centering steady rests; independently CNC-positionable • 2 prismatic steadies for screw milling • Steady jaw ranges: 15–30 / 30–65 / 65–140 / 140–200 mm • Hydraulic SMW KNCS‑N 260 power chuck with quick jaw change • Central lubrication system • Fully enclosed machine housing with driven safety doors; Visiport inspection windows • Hydraulic and pneumatic systems • Coolant and oil mist extraction preparation • Electronic hand control for B/C/X/Y/Z axesSoftware / control functions • Siemens Safety Integrated; Profibus / Profinet; OPC UA interface • 5‑axis simultaneous machining; B‑axis turning; TRANSMIT / TRACYL • Temperature compensation X/Y • DNC remote diagnostics; WMDS Diagnostic System; Telediagnosis capability • weinCAD EXTRUDER DESIGNER; WeinEXT – Praxis Additional equipment • Hinge-belt chip conveyor • Coolant filtration system KF 200: 1,400 l tank; 40 µm filtration; high‑pressure pump 80 bar / 46 l/min; low‑pressure pump 13 bar / 160 l/min; automatic oil skimmer • Oil mist extraction unit: airflow approx. 4,000 m³/h • Operating platform with stairs and railing

Condition: used, Year of construction: 1987, Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Isdpfx Afez Nx Hwjujih Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T

Condition: used, Year of construction: 1989, operating hours: 4,825 h, load capacity: 1,500 kg, lifting height: 4,000 mm, fuel type: electric, mast type: triplex, construction height: 1,900 mm, Year of construction: 1989 Field of application: Internal logistics Iedpfxjz R Imij Afueih Damages: none

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 235 mm, spindle bore: 52 mm, turning diameter: 400 mm, center height: 200 mm, turning length: 1,000 mm, Lathes Series PREMIUM CU 400 RD-Vario Our universal lathes and lathes with stepless speed control from the PREMIUM CU series feature a wide range of features and accessories for customers across various industries. The PREMIUM CU series allows precise adjustment of cutting speed to suit material and turning diameter – especially advantageous for non-ferrous metals, plastics, and for achieving perfect surface finishes on precision parts and fits. A notable highlight is the integrated R/L control units mounted on the tool slides, enabling simple switching between clockwise and counterclockwise spindle rotation. These replace the conventional shift rods typically found on universal lathes. The machine is equipped with electromechanical spindle brakes for extremely fast spindle stops, ensuring efficient handling. The leadscrews are fitted with overload protection. Performance Data and Specifications: Center distance: 1000 mm Center height: 200 mm Swing over bed: 400 mm Swing over cross slide: 235 mm Swing without bridge: 550 mm Bed width: 320 mm Cross slide travel: 235 mm Top slide travel: 110 mm Maximum turning tool cross-section: 25x25 mm Chuck mounting: DIN 55027 No. 6 Spindle (main spindle) taper: MK 6 mm Spindle bore: 52 mm Speed Range 1, stepless: 18 – 98 rpm Speed Range 2, stepless: 48 – 265 rpm Speed Range 3, stepless: 144 – 790 / 385 – 2120 rpm Longitudinal feeds (80): 0.015 – 0.6 mm/rev Cross feeds (80): 0.0075 – 0.3 mm/rev Metric thread pitch (40): 0.25 – 7.5 mm Metric module threads (40): 0.0625 – 1.875 mm Inch threads, TPI (40): 120 – 4 TPI Inch module threads, TPI (40): 480 – 16 TPI Tailstock quill taper: MK 4 Tailstock quill diameter: 50 mm Tailstock quill stroke: 100 mm Motor power: 7500 W Power supply: 400/50 V/Hz Total length: 2350 mm Total height: 1330 mm Weight: 1590 kg Standard Equipment: - RÖHM 3-jaw chuck - 5-piece quick-change toolholder set - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety switch - Tool slide with splash guard - Machine base / chip tray / splash wall - Tool set / operating manual / CE PREMIUM CU Series Standards: - Heavy-duty grey cast iron machine bed, excellent vibration damping - Removable bridge - Prismatic guideways - Hardened and precision-ground main spindle, high concentricity, adjustable precision bearings - Smooth-running main spindle and feed gearbox in oil bath - Gears made of case-hardened chromium-nickel steel, hardened and precision ground - Feed reverse function - Covered trapezoidal thread leadscrew, hardened, precision ground - Tool slide with locking nut Iiedjy Hlxfspfx Afujh - Precisely adjustable slideways - Solid tailstock with offset - Machining accuracy according to DIN standards Including 3-axis digital position display This machine is available for immediate delivery and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For information on equipment, please contact us.

Condition: ready for operation (used), functionality: fully functional, This used Jungheinrich Esmena pallet racking is a compact, high-performance heavy-duty racking system designed for industrial storage requirements. The modular high-bay shelving is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load capacity of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 10,080 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow lacquered - Uprights: approx. 400 x 105 cm, pre-assembled - Upright color: blue lacquered - Levels: floor + 2 - Pallet positions: 324 incl. floor locations - Condition: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 037 x uprights (approx. 400 x 105 cm), pre-assembled - 144 x beams (approx. 270 cm) - 288 x safety pins Price: €6,580.00 net €7,830.20 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner freight forwarder – shipping costs depend on the postal code - Professional installation and dismantling by trained teams available as an option - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department is happy to provide you with a non-binding offer tailored to your requirements. Whether new construction, conversion, or extension – we offer professional advice on your racking configuration. SHOWROOM: Visit us in our showroom! See a wide range of our pallet racking, warehouse shelving, and other solutions on display. Many systems are assembled and can be experienced firsthand. Our specialists are available for questions and personalized advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers and product variations! Isdpfx Afsz Srtceusih INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone. Our phone number can be found on our company page. ☎️ You can reach us by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number, and we will call you back as soon as possible.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 30,600 h, travel distance X-axis: 800 mm, wire diameter (max.): 0.33 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis +GF+ AGIECHARMILLES CUT 400 Sp was manufactured in 2017. It features a Wire Guide Set for Ø 0.250 mm and a Taper Tapering Kit for 45° taper cuts. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AGIECHARMILLES CUT 400 Sp machine we have for sale. Contact us for further details. Isdpfjz Hwt Ajx Afueih - Overall Dimensions (L x W x H): 2670 x 2870 x 2645 mm- Total Weight without Dielectric: 6300 kg- Total Weight with Dielectric: 8040 kg- Max Noise Level: 76 dB- Sliding Door: Yes- Worktable Dimensions: 1240 x 800 mm- Max Workpiece Dimensions: 1450 x 900 x 510 mm- Max Workpiece Weight: 3000 kg- Max Dielectric Level: 520 mm- Axis Travel X, Y, Z: 800 x 550 x 510 mm- Axis Travel U, V: 800 x 550 mm- Taper Angle / Height: ±30°/510 mm (Option ±45°/510 mm)- Taper Tapering Kit: Kit for 45° taper cut (Kit für 45° Konikschnitt)- Measurement Resolution X, Y, U, V, Z: 0.05 µm- Axis Speed: 0...3000 mm/min- Dielectric Type: Deionized water- Dielectric Total Volume: 1700 L- Dielectric Temperature Control: Automatic setting ±1°C- Filter Cartridges: 4- Cooling System: Water / Water heat exchanger- Wire Diameter: Ø 0.2...0.33 mm- Standard Wire Guides: Closed guides Ø 0.25 mm- Wire Guide Set: Taper Expert Ø 0.250 mm (for CUT X00/FI X4)- Automatic Threading: Yes- Permissible Wire Spool Weights: 8-25 kg- Generator Type: CLEANCUT- Three-Phase Input Voltage: 380/400 V ±10%- Mains Frequency: 50 or 60 Hz- Max / Required Power: 12 kVA- Min Roughness: Ra 0.2 µm (carbide) / 0.28 µm (steel)- User Interface: AC CUT HMI- Operating System: Windows XP- Display: 15" LCD- Connectivity: E-Connectivity, Ethernet, USB- Operating Ambient Temperature: 15...30 °C (20 ± 1 °C for optimal precision)- Max Relative Humidity: 40...80%- Compressed Air: 6-7 bar

Condition: used, Prints labels and applies them straight away This labeller prints the label as the pack arrives and then blows it onto the pack with air (blow applicator). That lets you put current data such as date, weight or lot number directly on the product. Printer and applicator hang from a column above a short conveyor and can be adjusted in height. According to the documentation supplied with the machine, it is an LPX 400 blow labeling system from Van Oers United. We did not find a rating plate with the year of manufacture. Iedpfez Ndccjx Afusih Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Print and apply labeller Print method: Thermal transfer (ribbon) Application: Blow applicator (air) Construction: On column with conveyor, height adjustable

Condition: used, EOS / Transitube Powder conveying system / dosing system EOS Transitube DCL 800/30 PM Automatic powder conveying and dosing system for two components For sale is a used powder conveying system from the manufacturer Transitube / tim plast Anlagenbau GmbH. The system is used for the continuous dosing, conveying, and homogenization of powders, ground materials, or granules and is ideally suited for plastics processing, extrusion, and injection molding. Technical data: Manufacturer: transitube / tim plast Anlagenbau GmbH Type: DCL 800/30 PM Designation: EOS powder conveying system Dosing system for 2 components 2 material containers, each approx. 400 liters Continuous dosing and mixing Materials: Powder Granulate Ground material / regranulate Power connection: 3/N/PE 400 V AC Frequency: 50 / 60 Hz Connected load: 2.0 kW Weight: approx. 180 kg Dimensions (approx.): Width: 1850 mm Depth: 900 mm Height: 1320 mm Dosing capacity, model-dependent: approx. 50 to 2,000 kg/h Dosing accuracy: ±0.5 to ±2 % Dosing range: 5 to 50 % Additive dosing: 0.2 to 10 % Equipment: 2 dosing containers with hinged lids Automatic control cabinet with touch panel Transitube conveying and mixing system Electrical control Screw dosing Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Various conveying hoses Piping Accessories as shown in the pictures Application areas: Plastics industry Extrusion Injection molding Powder conveying Material dosing Regranulate dosing Mixing systems Production automation Condition: Used Visual condition as shown in the pictures. Scope of delivery as shown in the pictures. Scope of delivery: 1x EOS Transitube DCL 800/30 PM powder conveying system Complete control cabinet Conveying units Motors Pneumatic components Hoses Piping system Accessories as shown in the pictures Important note: The system is sold as shown in the pictures. Please note the scope of delivery in the photos. Tables, tools, or other aids that may be visible in the pictures are not included in the scope of delivery unless explicitly stated. Shipping via freight forwarder is possible. Inspection is possible at any time by appointment. Subject to prior sale and errors. Iiodpfx Aezn H D Nefuoh If you have any questions, please do not hesitate to contact us by telephone.

Condition: excellent (used), Year of construction: 2004, LEISTRITZ RT 400-CCA Thread Rolling Machine Manufacturer: Leistritz Thommen GmbH, Switzerland Model: RT 400-CCA Machine Type:Thread Rolling Machine Year of Manufacture: 2004 Serial Number:1028 Country of Manufacture: Switzerland Technical Specifications Rolling Capacity - Maximum rolling force: 40 tons - Minimum shaft length: 125 mm - Maximum shaft length: 275 mm Rolling Die Dimensions For Ø69.85 mm tooling: - Minimum rolling die diameter: 176–178 mm - Maximum rolling die diameter: 215 mm For Ø80 mm tooling: - Minimum rolling die diameter: 176 mm - Maximum rolling die diameter: 210 mm Electrical Specifications - Power supply: 3 × 400 V - Frequency: 50 Hz - Rated power: 65 kW - Main fuse: 125 A - Control voltage: 24 V DC - Spindle power: 22 / 20.5 kW Hydraulic and Pneumatic System - Hydraulic operating pressure: 270 bar - Compressed air pressure: 6 bar Iisdpfoz Rzx Sjx Afujh - Hydraulic unit manufacturer: CYMAX AG, Switzerland - Hydraulic unit type: IHS240-DD10-IT75/55+18/270-9.2-A783.1 - Hydraulic oil tank capacity: 240 liters - Hydraulic reservoir capacity (auxiliary): 60 liters - Hydraulic pump flow rates: 75 / 18 / 40 l/min Machine Dimensions and Weight - Approximate dimensions (L × W × H): 3,400 × 2,900 × 2,200 mm - Machine weight: 4,900 kg Equipment - Two-spindle thread rolling arrangement - Hydraulic rolling system - CYMAX hydraulic power unit - Coolant and filtration system - Additional spindle pair for Ø69.85 mm and Ø80 mm tooling (subject to confirmation) Control - PLC control system - Control system retrofit reported in 2019 (subject to confirmation)

Condition: used, mileage: 314,481 km, power: 294 kW (399.73 HP), first registration: 06/2018, tire size: 315/70 R22.5, axle configuration: 4x2, brakes: retarder, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, retarder, second fuel tank, spoiler, = Additional Options and Accessories = - CD player - Roof spoiler Iisdpfx Afez Sn Uijush - Aluminum fuel tank - Headlights - Visor - Alternating current - Tool box = Further Information = Year of manufacture: 2018 Tire size: 315/70 R22.5 Brakes: Disc brakes Front axle: Steered; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm; Suspension: Leaf spring suspension Rear axle: Dual tires; Tire tread depth left (inside): 5 mm; Tire tread depth left (outside): 5 mm; Tire tread depth right (inside): 5 mm; Tire tread depth right (outside): 5 mm; Suspension: Air suspension Unladen weight: 7,760 kg Payload: 11,240 kg GVWR: 19,000 kg Damage: None

Condition: used, New: Yes Year of construction: 2024 Iijdpfez S A Svox Afueh

Condition: used, Year of construction: 1998, Serial No. 174520, control unit, manufacturer Arburg, closing force 400 kN, screw diameter 20 mm, sprue picker, manufacturer TecnoMatic, type micro cnc, vacuum separator, manufacturer Piovan, type DPA20, year of manufacture 2016, microprocessor control, 2 temperature control units, internal numbers 14 and 19, F, drying cylinder, desiccant dryer, manufacturer Piovan. Ijdpfx Aoz Hl H Rsfueih

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 66 kW (89.73 HP), cutting height (max.): 300 mm, cutting width (max.): 400 mm, Equipment: CE marking, Horizontal thin-cut band saw with 3 stations Manufacturer: Allwin Type: AW-400-3 Year of manufacture: 2013 Horizontal thin-cut block band saw with 3 stations, originating from a parquet manufacturing facility. Iodpfx Afozyx Epjusih Suitable for cutting individual lamellas. Max. cutting height approx. 300 mm Max. cutting width approx. 400 mm Approx. 22 kW / 30 HP per station Data partially estimated!