Roller Coater

Soest RC-400

Condition: good (used), functionality: fully functional, double tenoner, double drill, step by step Equipped with: 1+1 saws 1+1 milling group 1+1 drilling group Max length: 2500 mm Gjdpfxew A A E Ie Aafska

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Gkedpoychqzofx Aafoa Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 230 V, planing width: 330 mm, rotational speed (max.): 9,000 rpm, total width: 615 mm, total height: 555 mm, total length: 850 mm, chip removal: 3 mm, height adjustment type: mechanical, number of feed rollers: 1, number of planer blades: 36, planing height: 156 mm, PS33 with spiral shaft • Innovative design and powerful motor. • Chip removal of up to 3.2m. • IN & OUT TABLE. Gkjdpfx Aaovncu Iofea • Double knife cylinder with double-sided knives. • Indicator shows the material removal on the front of the machine. • Planer shaft with reversible knife • No extraction system required thanks to integrated fan to remove sawdust from the planer cylinder • Depth stop with seven positions for repeated thickness planing at the same height • Maximum part width up to 330 mm • Type: PS33 • Recommended use: Craftsmen • Input power (230 V): 1.8 kW • Planer shaft speed: 9,000 rpm. • Planer shaft diameter: 46 mm • Number of reversible plates in planer shaft: 36 pieces • Reversible plate size: 15 x 15 x 2.5 mm, R=150 • Feed speed: 7.9 m/min. • Max. material removal: 3.2 mm • Max. planing width: 330 mm • Max. planing thickness: 156 mm • Min. workpiece length: 120 mm • Extraction: integrated fan, 62 mm suction nozzle or fabric bag • Noise level: 96 dB • Machine dimensions (length x width x height): 340 x 615 x 555 mm • Machine dimensions with tables unfolded (length x width x height): 850 x 615 x 555 mm • Machine weight: 35 kg • Packaging dimensions (length x width x height): 415 x 660 x 545 mm • Package weight: 39 kg Included in the package: • 36 carbide inserts (in the planer shaft) • 5 replacement carbide inserts and screws • Waste bag for sawdust and Dust • Connection set for waste bags • Torx key for changing the inserts (TX25)

Condition: used, machine/vehicle number: 008377, X axis working area: 3390 mm Gkjdpfx Aex Swb Aeafea Y axis working area: 1570 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 32 Total number of tool changer positions: 10

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 36,000 mm, Ironing dryer, working width 4,600 mm, length 22,000 mm, of which 10,000 mm with press rollers, separate press cooling field, hot water heating medium, semi-automatic feeding device, type BFT46 and lifting platform, max. veneer length: 4,600 mm, roll width 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017 A second ironing dryer of a similar design is available. Gksdpfx Aaev Hygfofja

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Gkedew Rpd Sjpfx Aafoa Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Min. machining thickness: 4 mm Working Table: Fixed pass height Vacuum feed belt: yes Gkodpfowqdbmsx Aafea No. Operating units: 4 Nr

Condition: like new (used), Year of construction: 2019, operating hours: 180 h, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 1,300 mm, type of input current: AC, input voltage: 400 V, power: 10 kW (13.60 HP), SOEST Universal Surface Line for oiling, staining, lye treatment, patination, etc. Primarily intended for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two pad holders, and an additional two brushes, for distributing, working in, or patinating surface media in the pores and/or also for removing, distributing, and working in depending on the desired surface effects. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four replacement brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface finishing line is built for professional industrial use and is configured with a full set of equipment. A considerable amount of accessories for the system, such as extra rollers and cleaning machines, is also included (see photos!). Very robust construction, all motors frequency-controlled (Siemens). Speeds are steplessly adjustable for both forward and reverse operation. Maximum workpiece width is approx. 410 mm. The system is in very good condition, with little use—only approx. 180 operating hours—so it can be described as as-new. This surface processing line was only used as a backup line in parquet production and only for specific surface techniques, which explains the low operating hours (used sporadically from 2019 to 2022). In 2023, our company downsized and the system has been stored ever since or is immediately available, and therefore remains in nearly brand-new condition! This system is no longer used in our facility and is therefore being sold. The new price for this line was approx. €87,000 in 2019; the current selling price is negotiable! Inspection of this surface line is possible by appointment. Gkedpfx Aajyaiafefja If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video serves only as an example video of a similar system configuration!)

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 0-241-06-5232, functionality: fully functional, operating hours: 12,608 h, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, cutting length (max.): 4,300 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Gedpfx Ajxfvp Aeafjka Max. cutting length: 2200 mm Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. The machine will be available from 02/03/2026.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Gsdpex Dmdhjfx Aafeka Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow