Used Nef 400 for sale (17,717)

Condition: good (used), Year of construction: 2013, Grinding wheel 400 x 203 mm Regulating wheel 225 x 127 mm Fire extinguishing system Kraft u. Bauer Knoll microfilter Steuli lifting station Nwsdpfjyxl Drex Agwod

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R Nwjdpfx Agsw Intaewsd --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: used, Year of construction: 1999, turning diameter 500 mm turning length 1500 mm control Manual Plus spindle bore diameter 70 mm turning speed range 8 - 2800 U/min transmission ratio 3 swing diameter over face slide 290 mm spindle head DIN 55027 Gr 8 tool holder Typ C quill stroke 180 mm weight of the machine ca. 3,2 t dimensions 3,0 x 1,8 x 1,8 m Description of the machine: This machine is suitable for turning chucked and shaft workpieces. The commercially available steel grades, casting, copper, aluminium, brass, gunmetal and cuttable plastic can be turned on this machine. --> Concept of the N.E.F. plus The machine si supplied as standard with the following described equipment - Cycle control - AC-Main drive - Compund slide rest with AC drive and operating panel - Tailstock traversable using slavingunit, manualy clamped, including following centre point - Coolant unti - Chip protection hoods, manually actuated - Protection hood for chuck - Fast change tool holder Hahn & Kolb Multifix C - Reduction collar for turning spindel accessories according to pictures: - 2 STK steady rests - various clamping jaws - Hahn & Kolb Multifix type C - Various torsion bar holders Technical data: Working area: - Circulation diameter over bed: 500 mm - Circumferential diameter above the radial slide: 285 mm - Chuck Ø: 250(315) mm - Face slide: 260 mm - Distance between centres: 1000/1500 mm Turning spindle: Njdpfjub Amlsx Agwowd - Spindle head DIN 55027: Size 8 - Hole diameter of the spindle: 70 mm - Hollow taper of the spindle nose: 80 metric - Spindle diameter in front bearing

Year of construction: 1987, condition: good (used), machine/vehicle number: 108922, disk of circular saw-Ø: 400 mm Nwedpfx Agjhz T Hfswed cutting area at 90° round: 130 mm cutting area at 90° square: 305 x 40 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 245 x 40 mm cutting speed: 10 m/min engine: 380 V, 1,7 kW space needed: 1100 x 1000 x 1900 mm weight: 700 kg

Condition: ready for operation (used), welding circuit at 60% ED: 310 A Nwedpfx Agjd R S Dfswod welding circuit at 100% ED: 235 A electrical connection: 400 V space needed: 1000 x 750 x 630 mm

Year of construction: 1988, condition: used, machine/vehicle number: 109357, disk of circular saw-Ø: 400 mm Nwjdpfxjb Sciaj Agwod cutting area at 90° round: 130 mm cutting area at 90° square: 240 x 85 mm cutting area in mitre at 45° square: profiles flat 180 x 70 mm cutting speeds: 10/20 m/min forward feed speeds: 0 - 1000 mm/min electrical connection: 400 V, 1,7/2,6 V space needed: 2750 x 1500 x 1900 mm weight: 1350 kg

Year of construction: 1966, condition: used, machine/vehicle number: 7293, disk of circular saw-Ø: 400 mm cutting area at 90° round: 120 mm cutting area at 90° square: 110 mm cutting speeds: 10 - 44 m/min forward feed speeds: 0 - 500 mm/min cutting length: 10 - 500 mm Nedpfjbr Hwdex Agwewd electrical connection: 380 V sawing drive: 4 kW space needed: 1360 x 2650 x 1850 mm weight: 950 kg

Condition: used, machine/vehicle number: 9029, table size: 400 mm Ø Nwsdpe N Ra Rsfx Agwod height: 135 mm dimensions: 500 x 500 x 135 mm

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW Njdpfxsz N Ams Agwjwd space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: used, machine/vehicle number: 87/64-369, Grinding wheel dimensions: 400 x 50 mm Grinding wheel speed: 1400 rpm Drive motor: 380 V, 1400 rpm, 2.2 kW Space requirement: 750 x 470 x 470 mm Weight: 138 kg Nwjdjb Tqhqepfx Agwjd

Condition: excellent (used), Saw blade diameter: 360 mm Cutting range at 90° round: 110 mm Nwodpfev D Hzkox Agwed Cutting range at 90° rectangular: 110 x 400 mm Cutting range in miter at 45° round: 110 mm Cutting range in miter at 45° rectangular: 110 x 280 mm Cutting speed: 16 - 50 m/min Drive motor: 380 V, approx. 1.5/2 kW Space required: 2600 x 1150 x 1600 mm Weight: approx. 1000 kg

Condition: ready for operation (used), Year of construction: 1998, MIG-MAG welding system Set welding current: 50 - 400 A Max. welding current at 45/60/100% duty cycle: 400/345/265 A Open circuit voltage: 16.5 - 45 V Standard wire feed for steel: 1.0 + 1.2 mm Nwjdpswx Hz Ejfx Agwod Wire feed speed: 1 - 20 m/min Electrical connection: 380 V Weight: 164 kg Space required: 950 x 550 x 850 mm

Condition: used, Year of construction: 1988, Saw blade diameter: 400 mm Cutting range round: 130 mm Rectangular: 305 x 40 mm Miter cut at 45° round: 130 mm Rectangular: 40 mm Cutting speed: 10 m/min Hydraulically infinitely variable feed speed: 0 - 1000 mm/min Saw drive: 380 V, 1.7 kW Weight approx.: 700 kg Nwsdpfx Agow Tk Ecjwed Space requirement without roller table: 1100 x 1000 x 1900 mm

Condition: ready for operation (used), Year of construction: 1980, Saw blade diameter: 400 mm Cutting capacity at 90° round: 120 mm Rectangular: 200 x 80 or 150 x 70 mm Mitre cut at 45° rectangular/flat: 150 x 70 mm Upright: 100 x 60 mm 2 cutting speeds via pole-changing motor: 19 and 28 m/min Feed rate hydraulically infinitely adjustable: 0 - 1000 mm/min Drive motor: 380 V, 1.7/2.6 kW Nwsdpfxjx Anl Ds Agwsd Weight: approx. 850 kg Required space: 1200 x 1100 x 1620 mm

Condition: ready for operation (used), Year of construction: 1974, disk of circular saw-Ø: 400 mm Nwodpfstp Hgtsx Agwsd cutting area at 90° round: 120 mm cutting area at 90° square: 200 x 80 mm cutting area in mitre at 45° square: 150 x 70 mm cutting speed: 13, 17, 26 m/min engine: 380 V, 1,7/2,2/2,6 kW space needed: 1050 x 1000 x 1680 mm weight: ca. 850 kg

Condition: good (used), Year of construction: 1987, Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangular: 305 x 40 mm Mitre cut at 45° round: 130 mm Rectangular: 245 x 40 mm 2 cutting speeds via pole-switchable motor: 9 and 18 m/min Nwjdpfx Agox Ir Rwowod Feed rate hydraulically steplessly adjustable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Weight approx.: 800 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm

Year of construction: 2006, condition: excellent (used), machine/vehicle number: 24591, Throughput approx.: 2 - 5 m³/h Njdpfx Agsdxmd Uewewd Filling and material outlet opening: 300 mm Ø space requirement (built up, with bridge): 1400 x 1200 x 2200 mm

Year of construction: 1962, condition: ready for operation (used), machine/vehicle number: 62110, max. working width: 2040 mm for metal sheets up to: 4,5 mm opening width top clamping bar: 320 mm adjustment bending cheek: 120 mm clamping bar drive: 2,2 kW below cheek drive: 2,2 kW electrical connection: 5 kW weight: 3700 kg space needed: 3250 x 1000 x 1900 mm Nsdpfx Agjfnryyewjwd

Condition: used, mileage: 998,389 km, power: 294 kW (399.73 HP), first registration: 01/2008, fuel type: diesel, tire size: 385/65R22.5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 600 l, color: orange, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: other, total length: 8,990 mm, total width: 2,500 mm, total height: 3,900 mm, Year of construction: 2007, Equipment: parking heater, = Additional Options and Accessories = Nsdpfx Aeyxnhyogwewd - Radio/CD = Further Information = General Information Cab type: Globetrotter Technical Information Number of cylinders: 6 Axle Configuration Tyre size: 385/65R22.5 Front axle: Tyre tread: 40%; Reduction: single reduction; Suspension: parabolic suspension Rear axle: Tyre tread: 30%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,517 kg Payload: 11,983 kg Gross vehicle weight: 19,500 kg Layout Number of sleeping berths: 1 Condition Damages: none = Company Information = Heisterkamp Used Trucks BV does not simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We handle used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - E-mail: - Website:

Condition: new, Year of construction: 2025, power: 400 kW (543.85 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Nsdow A Ha Nepfx Agwjwd Weights Empty weight: 12.000 kg Functional Generator capacity: 400 kVA CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Transport dimensions (LxWxH): 4,65x2,3x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Control Panel - Tank

Condition: new, Cantilever shelf, double-sided, new goods Data: - H: approx. 400 cm - W: approx. 256 cm - L: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle dimension: approx. 131 cm - New goods from the factory - Double-sided - 500 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 4 storage levels (5 storage levels) - Delivery time approx. 4 weeks Shelf consists of: - 015 x stands, double-sided, including base approx. 400cm made of IPE160. - 120 x cantilever arms approx. 120 cm made of IPE 80, without deflectors - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf uprights and cantilever arms can be statically verified, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee Njdpjyxp Stofx Agwowd - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Brackets made of angle steel, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €12,450.00 net plus statutory VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: excellent (used), Year of construction: 1993, operating hours: 2,859 h, functionality: fully functional, turning length: 600 mm, turning diameter: 290 mm, Universal Lathe – GILDEMEISTER CTX Year of manufacture: 1993 Operating hours: 2,859 h • 12-position turret tool holder • Max. spindle speed: 5,000 rpm • Max. turning diameter (X axis): 290 mm Nwedpfjyxgi Nex Agwod • Max. turning length (Z axis): 600 mm • Hydraulic 3-jaw chuck, Ø 200 mm • Spindle bore: Ø 66 mm • Chip conveyor included The machine is in very good condition and was previously used in a technical training facility.

Condition: excellent (used), machine/vehicle number: XLEP8X40004372570, mileage: 551,974 km, power: 294 kW (399.73 HP), first registration: 11/1997, fuel type: diesel, tire condition: 50 %, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 8,000 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 1997, Equipment: ABS, air conditioning, differential lock, electric window regulation, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest - Day Cabin - Drum brakes - Front suspension: Leaf - Hub Reduction - Hydraulics - Open roof - PTO Nwjdpfx Aeywyglogwsd - Rear suspension: Leaf - Sper - Thick Axles - Tipping hydraulics = More information = Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Technical condition: very good Visual appearance: very good

Condition: good (used), HAUSER S 35-400 is a CNC jig grinder for precision, high accuracy and reliability. Capacities: table 600×380 mm, X500 Y300, vertical slide 450 mm, spindle‑to‑table 485 mm, max grinding Ø 230 mm (360 with plate), spindle nose stroke 340 mm, taper up to 16°. Specs: spindle vertical travel 1–110 mm stepless, travel speeds 1–12 m/min, planetary C 5–250 t/min, 3×380 V 50 Hz, total power 10 CV, weight ≈4000 kg, footprint 2700×1700×2850 mm. Accessories: coolant, paper filtration, lamp, MSS, oil‑mist extractor, CBN redresser HF, toolchanger 12 EROWA. Suited for tight tolerances in automotive, watchmaking, toolmaking, aerospace and medical sectors. Nwsdpjyxn Ndsfx Agwjd

Condition: excellent (used), MAZAK INTEGREX 400-3S is a CNC Turning-Milling-Drilling Center designed for precision, high accuracy and reliability. Capacities: distance between centres 1500 mm, swing 760 mm, max turning length 1524 mm, bar passage 102/77 mm, tool magazine 40 stations (Ø max 90 mm, L 400 mm). Main specs: main spindle A2-8 stepless 35–3300 t/min 30 kW 1200 Nm; back spindle A2-8 35–4000 t/min 26/22 kW 500 Nm; milling spindle CAPTO C6 15–12000 t/min 18.5 kW 120 Nm. Travels X630 Y±115 Z1585 mm; feeds 0–8000 mm/min; rapid X/Z 38 m/min Y26 m/min; weight ~13300 kg; footprint 5110x2196 mm; height 2798 mm. Equipment: coolant 444 l (15 bar through milling spindle), Forkhardt 3-jaw chucks Ø400/315 mm, linear scale for X, RS232, PCMCIA, spindle sync, chip conveyor, synchronized tapping, foot pedal. Enables tight tolerances; typical applications: automotive, aerospace, medical, machine tools, watchmaking. Nwedpfxoyxn H Ne Agwod