Used Nc Lathe for sale (9,107)

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Gsdpfxeynky Aj Aaxoit Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: used, Year of construction: 2003, turning diameter 430 mm turning length 519-525 mm control Mori seiki MSX-805 Gijdpfx Aaoy Sblxjxet x-axis 230 mm z-axis 520 mm weight of the machine ca. 4100 kg

Condition: used, Year of construction: 2014, turning diameter 376 mm Gsdpjy Sblrsfx Aaxeit turning length 760 mm control Fanuc x-axis 260 mm z-axis 830 mm weight of the machine ca. 6000 kg

Condition: used, Year of construction: 2000, max swing diameter 700mm, X/Y 255/520mm, tailstock, 12-position tool turret, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 12t Godpfsym Sm Ujx Aaxjit

Condition: good (used), Year of construction: 1992, functionality: fully functional, turning length: 450 mm, turning diameter: 290 mm, spindle bore: 66 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 5,000 rpm, turning diameter over bed slide: 600 mm, Control: EPL Country of origin: Germany Spindle bore: Ø65 mm Tool turret: 12 driven stations Tool holder: VDI 40 Tool speed: 3,000 rpm Weight: approx. 4,700 kg + 600 kg control cabinet Chip conveyor: BMF Bürener Maschinenfabrik Bar feeder: GIOVANNI CUCCHI, type DB 70 Tools available at extra cost A total of 6 machines with bar feeders are available (price per machine with feeder) Gijdpfxsy N Tdzs Aaxst 1 machine without feeder available (€8,500)

Condition: good (used), Year of construction: 2015, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display Giedpfx Aaoy I Da Roxjt * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: new, Müller co-ax 5-PCS-2 15 NC valve with external drive 24V DC ,unused, 100% functional, scope of delivery according to photos Gjdpfx Aji Eb Tdsaxsit

Condition: ready for operation (used), Peiseler ZASP 160 NC-part unit SN:19626 , used, normal signs of wear, 100% functional, scope of delivery according to photos, ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Giedpoi Ecdkjfx Aaxjt

Condition: ready for operation (used), Peiseler AWUP 160 NC-part unit SN:19627 , used, normal signs of wear, 100% functional, scope of delivery according to photos, ATTENTION: Please ask charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Giedpei Ecdgefx Aaxot

Condition: new, coax 5-PCS-2 10 NC lateral valve,unused, 100% functional, scope of delivery according to photos Gijdpei D Umdofx Aaxet

Condition: new, müller co-ax 5-PCS-2 10 NC valve with external actuator 24V DC ,unused, 100% functional, scope of delivery according to photos Gedpfx Aasi Eb Tasxsit

Condition: used, Year of construction: 2006, turning diameter 500 mm Gedpfxsxrg Dws Aaxoit turning length 1300 mm control Fanuc 18i TB turning speed range - main spindle 0 - 3500 min/-1 drive capacity - main spindle 33 kW max. torque 800 Nm number of tool places 12 axial / 12 direkt Pos. tool taper VDI 40 output max. 8 kw max. torque 35 Nm turning speed range - driven tools 0 - 4000 U/min x-travel 318 mm z-travel 1360 mm y-travel -60 / +80 mm tailstock quill taper MT 4 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale reserved!

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Accessories: Gedoxq R Evopfx Aaxjit - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 33,908 h, functionality: fully functional, CNC – Lathe Manufacturer: WEILER Model: E 35 D Year of manufacture: 2002 Technical data Brand: WEILER Model: E35 D Year: 2002 Center distance: 950 mm Center height: 200 mm Turning diameter over bed: 410 mm Spindle bore: 54 mm Max. turning diameter: approx. 260 mm Spindle speed: 20 – 3000 rpm Power: 10 kW Giodpfx Aaey R Uukjxet Dimensions: approx. L 2.60 x W 1.60 x H 1.70 m Weight: approx. 2.5 t Equipment • Operating manual • Coolant system • 3-jaw chuck • Collet chuck adapter All information subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Brand: GEMINIS Model: GHT4 G2 720 x 3000 Cnc: FAGOR 8055 Distance between points 3,000 mm Diameter over bed 720 mm Diameter over carriage 470 mm Bed width 550 mm Rapid traverse X axis 8 m/ min Rapid traverse Z axis 8 m/ min Spindle speeds 0-1600 Number of automatic head ranges 2 Main motor power 20 kW Spindle nose type DIN- 55027-11 MULTIFIX quick change tool holder Quill travel 104 mm Tailstock quill diameter 100 mm Tailstock quill traverse 200 mm Quill tailstock MORSE 6 Godpfx Ajy R Evxjaxeit

Condition: used, Year of construction: 1959, total length: 3,500 mm, total width: 1,200 mm, total height: 1,500 mm, Colour: Green Empty weight: 2.000 kg - Year: 1959 - Documentation available: No - CE certificate present: No - Serial number: 37 - Drive system: Conventional - Centre height [mm]: 270 - Swing over bed [mm]: 540 - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 1500 - Bed width [mm]: 450 - Spindle bore [mm]: 62 - Min. spindle speed [rpm]: 14 - Max. spindle speed [rpm]: 710 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3500mm x 1200mm x 1500mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Giedpfxoy Idtws Aaxjt Lukas van Rossum

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor Giedpewwkx Ejfx Aaxot  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC lathe ROMI M680 Control: Fanuc Series 21i-TB Year of manufacture: 2008 Internal machine no.: 42 Turning length: 2,000 mm Turning diameter: 680 mm Max. speed: 1,800 rpm Sauter turret: VDI 40 Equipment - Three-jaw chuck - Coolant system - Steady rest - Various tool holders - Manual tailstock Weight: approx. 6,300 kg Gedpfxsylimvs Aaxoit

Condition: good (used), Year of construction: 2001, Control: SIEMENS 840D Gedpfx Asy R Ufvjaxeit Max. machining diameter: 2,800 mm Machining height: 1,000 mm Tool holder: CAPTO 6 Including chip conveyor and 2 supports

Condition: good (used), Year of construction: 2001, Control: SIEMENS 840D Machining diameter: 4,000 mm Godpfxjy R Ucuo Aaxoit Machining height: 1,400 mm Cross slide travel: 850 mm Including chip conveyor and 2 supports

Condition: used, Hydro-mechanical NC machine vice, VIS - HYDRAULIQUE\nPrecision machine vice, clamp\nType 20700\nYear of manufacture approx. 2000\nJaw width 150 mm\nJaw height 42 mm\nClamping range 0 to 250 mm\nMax. opening width 253 mm\nClamping force 6 tons\nGuideway height 51 mm\nGuideway length 450 mm\n- Hydro-mechanical machine vice\n- Quick adjustment with clamping ball lock in 8-position hole grid\n- Rigid base body, precision ground on all sides\n- Can be clamped horizontally, vertically, or laterally\n- Guideway with 19 mm guide slot\n- Additional set of prism jaws included\nDimensions (L x W x H): 480 x 150 x 107 mm\nWeight: 32 kg\nGood condition Godpfey Sbxfjx Aaxjit

Condition: used, Year of construction: 1998, Package of 3 Schütte S32PC Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: S32PC Yob: 1998 One machine is operational; the other two can be used for spare parts Includes IEMCA PRA40/33/P loading magazine, built in 1997 (rack type loader) Includes IEMCA PRA40/42/F loading magazine, built in 1999 (bundle loader) Includes IEMCA SIR325 loading magazine (integral loader with bundle magazine) tooling included in delivery may differ from the pictures Please, contact us for getting more information and pictures on mail(at) or Gijdpfxey Nk I Ds Aaxst *

Condition: good (used), Year of construction: 2013, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, Gsdpswnfzcjfx Aaxoit 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: used, Year of construction: 1996, turning diameter 320 mm Gedpfx Aaoyg Rbdsxeit turning length 1100 mm control Fanuc

Condition: used, manufacture MONDIALE type Gallicop mm In our assessment, the machine is in good used condition. Gijdjxx A I Sjpfx Aaxot Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.