Used Nc Lathe for sale (8,944)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Technical details turning diameter 570 mm turning length 1000 mm control MANUALplus 620 swing diameter over face slide 340 mm spindle bore 93 mm spindle turning speed range 1 - 3000 U/min transmission ratio 2 rapid power traverse in X-and Z direction 7 / 10 m/min max. workpiece weight -without tailstock 500 kg max. workpiece weight between centres 1000 kg workpiece weight in steadies max. 1250 kg main drive motor (100/60% ED) 20 / 25 kW Dimensions (LxWxH) 2,94 x 2,20 x 1,96 m max. torque on the spindle ca. 1400 Nm weight of the machine ca. 3,4 t Additional information * HEIDENHAIN MANUALplus 620 control system - Control system expansion for ICP and DIN programs, incl. thread repair * Automatic 8-station SAUTER turret with driven stations, VDI shank D=30 mm, mounted in front of the turning center (limits achievable turning diameter and tailstock operations; reduces turning length) * 2-speed planetary gearbox, automatic shifting * Main spindle holding brake, incl. software upgrade for bolt hole circle and milling cycle options - C-axis-style functionality for pocket milling, with drilling, milling, Codjz Ixz Dopfx Ap Dehd and engraving cycles and free ICP input * Reinforced coolant pump * RÖHM 3-jaw chuck, 315 mm, with one set of hard jaws * Steady rest * Approx. 20 fixed tool holders

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Chedpfjwf Sfvox Ap Ded Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2017, turning diameter 8 till 38 mm turning length 250 mm control Fanuc Chedpfx Apj Aaq Tve Ded

Condition: used, Year of construction: 2018, Technical details: weight of the machine ca.: 3,5 t Cedpfoz Sr Dujx Ap Dshd

Condition: excellent (used), Year of construction: 2021, turning diameter 300 mm spindle bore 75 mm bar capacity 65 mm turning speed range 6.000 U/min turning length 508 mm travel -z axis 560 mm travel -x axis 210 mm turret (x-stations) 24 control FANUC 0i Smart Plus Touch c-axis 0,001° 0 total power requirement 23 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. LTH 2,9 x 1,7 x 1,8 m Power-on hours = 9,723 hrs Processing time = 2,158 hrs Chodj Afp Ebjpfx Ap Dod - 24-station tool turret, driven tools at 6,000 rpm - Workpiece catcher - RENISHAW measuring probe, automatically swiveling - Sub-spindle - Chip conveyor - Coolant pump - Magazine equipped with static tools, including 2 driven tools Accessories: Includes SAMSYS Multi3000 short-bar loader Includes collet chuck Includes 38 collets Includes 210 mm power chuck with various jaws Includes 130 mm power chuck for sub-spindle Includes 2 x driven tool holders (radial + axial) Includes 10 static tool holders Includes inserts for tool holders Includes turning tool holders Includes USB & LAN interface

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 mm Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 1/min diam. of main spinde: 135 mm spindle bore: 68 mm Chodpfxe Ad Izfo Ap Ded internal taper diameter: 68 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets Cjdpfe Ad Izlsx Ap Dehd MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: good (used), Year of construction: 2008, Steuerung: Fagor CNC8055 Aufnahme: VDI30 Späneförderer Werkzeugwechsler: Sauter Revolver 8Fach Z-Achse: 810mm X-Achse: 280mm Spitzenweite: 1000mm Drehfutter: Röhm Duro, Durchmesser 200mm Drehdurchmesser über Schlitten: 230mm Drehdurchmesser über Bett: 460mm Spindeldurchlaß: 56mm Spindeldrehzahl: max. 3100 U/min. Werkstückgewicht max.: 570kg Antriebsleistung: 18kw Maschinen Abmessung: Länge 3660mm – Breite 1870mm Gewicht Maschine: 2900kg Codpfsim H Unsx Ap Dohd

Condition: excellent (used), CNC vertical lathe Gildemeister CTV 250 Working area: Chuck diameter: 250mm Csdsvuqm Sepfx Ap Dshd X-axis: 800mm Z-axis: 300m Spindle head: 170 h5 Spindle diameter in the front bearing: 120mm Spindle bore: 79mm C-axis Number of work stations: 12 Videos available!!

Condition: good (used), Year of construction: 2001, Machine is in good condition. Chjdpfx Aorpk Rmop Dsd Parts shown by hand not come. Cutting tools not come.

Condition: used, Year of construction: 1981, faceplate diameter 1600 mm swing diameter 1800 mm turning height 1500 mm control Siemens type 840 D mm turning speeds 2,5-250 U/min Feed 1-3000 mm/min Tool changer 12 Pos. workpiece weight 10000 kg slide adjustment 1200 mm ram head dimension 240x240 mm main drive 45 kW Accessories and cabinets can be purchased optionally The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Cjdpfx Aeyq Sxfop Dshd than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: repair required (used), Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 1130000731, spindle bore: 38 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 628 mm, travel distance Z-axis: 175 mm, spindle motor power: 7,000 W, total height: 1,790 mm, total length: 1,600 mm, total width: 947 mm, type of input current: three-phase, overall weight: 1,250 kg, Equipment: documentation/manual, Machine for processing feed components with individual part feeding via a vibrating conveyor and a loading arm. Although the machine is still operational, it would need to be overhauled or can be used as a source of spare parts. The machine is being sold including the feeder and chip conveyor. This machine was taken out of service approximately one year ago. Cedj Af Ryyjpfx Ap Dshd

Condition: excellent (used), Year of construction: 2006, operating hours: 7,562 h, turning length: 515 mm, turning diameter: 366 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 2,705 mm, total width: 2,000 mm, overall weight: 5,500 kg, CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for Bar feeder Bar loader IEMCA MASTER 880/MP 33 LL Working time hours Potencial nominal kVA: 27.4 Basic machine dimensions / weight Csdpfx Aou T H Dxep Dohd Length mm: 2.705 Width mm: 2.000 Height mm: 2.120 Weight kg: 5.500

Condition: used, functionality: fully functional, used / tested Dry screw vacuum pumps Csdju Urq Topfx Ap Djhd Nominal suction capacity 350 / 420 m³/h (50 / 60 Hz) Ultimate pressure = 0.05 / = 0.01 hPa (mbar) (50 / 60 Hz) Nominal motor power 7.5 / 9.5 kW (50 / 60 Hz) Nominal motor speed 3000 / 3600 min?¹ (50 / 60 Hz) Sound pressure level (ISO 2151) 66 / 69 dB(A) (50 / 60 Hz) Dimensions (L × W × H) 1367 x 480 x 700 mm Gas inlet / outlet DN 80 PN 6 / DN 63 ISO-K Areas of application This information will be added soon Scope of delivery This information will be added soon

Year of construction: 1985, condition: used, Distance between centers: 1200 mm Codsy A Hiqjpfx Ap Dshd Copying attachment: Yes Motor power: 1.5 kW Speed: 870 / 1400 / 2100 rpm

Condition: excellent (used), Year of construction: 2000, 1 Muratec MT12 CNC lathe with dual spindle and dual turret 4 axes Supplied with all tooling and tool holders Year: 2000 Chodpfx Ajy Ta Nfjp Ded 1 BOSS 542 CNC indexing head /32

Condition: used, Year of construction: 1999, Turning machine, cycle-controlled Weiler E50 Year of manufacture: 1999 Control system: Weiler cycle control D1 Operating hours: 28,506 Distance between centers: 1,000 mm Distance between centers (height): 280 mm Max. chuck diameter: 315 mm Max. diameter over bed: 570 mm Max. diameter over cross slide: 340 mm Max. diameter over offset: 600 mm Length of offset: 140 mm Max. workpiece weight: 1,600 kg Spindle bore: 83 mm Spindle head: Size 8 Quick-change tool holder: Parat 4-position turret Includes 1 chuck, RÖHM, new! Chedpfx Aezt S Svep Dod Dimensions: 2,850 x 2,280 x 1,750 mm Weight: 3,350 kg Available immediately 31126ä

Condition: used, Year of construction: 1998, functionality: fully functional, The used AVM ANGELINI DG13 2-axis CNC lathe is a medium to large-sized, 2-axis numerically controlled lathe with an inclined bed, featuring a center distance of 850mm, an ASA 8” spindle nose, and a maximum bar capacity of 90mm. It was manufactured in 1998 (installed in 2000), complies with “CE” standards, and is equipped with a FANUC 0-T CNC control. Chjdpfx Aszu Awfjp Dod It features a 315mm hydraulic chuck, a 26kW spindle motor, a 12-position automatic tool changer turret (with corresponding tool holders), and is complete with a tailstock, a chip conveyor, manuals, and a “CE” certificate.

Condition: good (used), Year of construction: 2004, For sale are 2 Scherer VDZ 80 DS units with the following technical specifications: Circumferential diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Diameter at the front bearing: 85 mm Diameter at the rear bearing: 75 mm 2 x A4 spindle Chedpj Ahqyisfx Ap Dsd Spindle unit drive, rated power: 16.8 kW Rated torque: 100 Nm Speed: 1000 - 7000 rpm Travel speed, Z-axis: max. 30 m/min Travel speed, X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Please note! The unit was part of a complete production line. However, it has its own individual program. Price is per unit! Upon request, transport and loading can be arranged throughout Europe for an additional charge. Prices exclude VAT. Inspection is possible by appointment. Please contact us, our team will be happy to assist you. Machine sales / purchases WE BUY / SELL PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Do you need a high-quality but affordable machine for your production? Or do you want to sell your machine? For further information or to contact us, please use the contact form.

Condition: reconditioned (used), Product information "Voest Alpine DA 160" Voest lead and feed spindle lathe Model DA 160 Condition: Refurbished Technical data Center height: 165 mm Distance between centers: 650 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 190 mm Bed width: 210 mm Lead spindle diameter: 25 mm Chuck diameter: 160 mm Tailstock spindle: MK 3 Spindle speed (16): 30 - 2500 rpm Motor power: 2 / 2.4 kW Quill stroke: 100 mm Dimensions (L x W x H): 1500 mm x 900 mm x 1650 mm Equipment: - Geometry report - 3-axis digital display, Sino brand - NEW - 3-jaw chuck - Emergency stop button Chjdoy Ndqrjpfx Ap Dsd - Quick-change tool holder system Multifix, number of holders 6 - Machine light NEW - Bed stop - Coolant system NEW - Drill chuck with taper shank - Follower point - Lead and feed spindle cover NEW - Chuck guard, limit switch secured - Operating tool - Operating manual - Machine feet

Condition: new, Coax 5-PCS-2 10 NC lateral valve, unused, 100% functional, scope of delivery as shown in the photos. Cedpfx Apsi D Umde Dshd

Condition: used, Year of construction: 1996, operating hours: 22,400 h, functionality: fully functional, machine/vehicle number: 474, -Weiler -E50/1 -No.: 474 -Year of manufacture: 1996 -Operating hours: approx. 22,400 -Voest-Alpine Steinel control system (the control system likely operated via a separate desktop PC) -Includes chip conveyor, various tool holders, and tools Shipping possible upon request. Cjdpfsy U Iqgox Ap Dshd Sale only to commercial businesses. Stated purchase price = net price plus 19% VAT = €9,282.00 gross.

Condition: used, Year of construction: 2009, operating hours: 143 h, functionality: fully functional, machine/vehicle number: 283016, overall weight: 15,000 kg, fuel type: diesel, power: 504 kW (685.25 HP), output current: 909 A, output voltage: 400 V, output frequency: 50 Hz, motor manufacturer: Volvo Penta, type of cooling: water, For sale is a used diesel emergency generator with a Volvo Penta diesel engine and a Marelli generator. The generator has a power output of 630 kVA (504 kW) and approximately 143 operating hours. The emergency generator is housed in a soundproof 30-foot container and has a 4,000-liter fuel tank. Technical data: * Generator manufacturer: NTC Notstrom-Technik-Clasen GmbH * Generator type: D-630 4JW NC Chode Agu Dtopfx Ap Dod * Generator no.: 283016 * Engine manufacturer: Volvo Penta * Generator brand: MarelliGenerators * Generator type: MJB 355 MA4 * Rated power: 504 kW * Apparent power: 630 kVA (PRP) * Voltage: 400/231 V * Rated current: 909 A * Frequency: 50 Hz * Speed: 1,500 rpm * Operating hours: approx. 143 h * Cooling: Water cooling * Total weight including container: approx. 15,000 kg * Maximum ambient temperature: 40 °C * Maximum installation altitude: 500 m above sea level * Year of manufacture: February 2009 Equipment: * Soundproof 30-foot container * 4,000-liter fuel tank * Volvo Penta diesel engine * Marelli three-phase generator If you are interested or have any questions, please feel free to contact us.

Condition: used, Year of construction: 2001, turning length: 750 mm, turning diameter: 340 mm, turning diameter over bed slide: 665 mm, CNC Lathe Manufacturer: TRAUB Model: TNA 400 Year of manufacture: 2001 Control system: SYSTEM TX 8H Technical specifications: - Turning diameter: 340 mm - Turning length: 750 mm - Spindle bore: 80 mm - Swing over cross slide: 530 mm - Swing over bed: 665 mm - Speed range – main spindle: 3,150 rpm - Drive power – main spindle: 22 kW - Number of tool stations: 12 positions 2 machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Chedpfxjxwdw Ee Ap Dsd Equipment & accessories: - Y-axis - Accessory package including static and driven tool holders In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 1999, 1 MURATEC MT12 CNC lathe Double-spindle, double-turret Year 1999 1 STAUBLI RX90 robot with control center All tooling and tool holders included. Cedpoy Ta Sgjfx Ap Dshd