Used Mubea Kl 350 for sale (100)

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Chedpfx Ajyvvkwed Iec Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, Year of construction: 1990, pressure 35 t no. of strokes ca 72 Hub/min dayligth 195 mm Chedpjztf Anefx Ad Iec total power requirement 1,5 kW weight of the machine ca. 330-400 kg

Condition: used, Year of construction: 1970, rechts Ausklink / links S fence elektronisch ja /nein foot pedal mechanisch Chedpfx Adeztf Aho Iec weight of the machine ca. 1,3 t

Condition: reconditioned (used), Year of construction: 1982, Mubea / Muhr and Bender BFL 350: Chedpfxoium Sts Ad Ioc - Combined Profile-/bar steel shears with hole punch and notcher - Punching force 35 tons - punches up to Ø 28/23 mm in 10/12 mm sheet thickness - cuts up to Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: used, Punching force: 350 kN (punches e.g. 23 m in 12 mm material) Chsdpfx Ajxqqphod Iec Cuts 150 x 10 mm on the flat steel shears Two separate foot switches for the punching and shearing sides, allowing independent punching and shearing Support table on the punching side with stop cams A range of tools is included in the price

Condition: used, Year of construction: 1997, Pressing force: 700 kN Throw/counterstroke: 760 mm Hub steplessly adjustable between 0 and 75 mm 48 strokes per minute at 20 mm stroke Locht e.g. 30 mm diameter in 20 mm normal steel Cjdpfxezyggbo Ad Iohc Large support table with folding cam Assortment of tools is included in the price and can be customized Total weight of the machine approx. 2,700 kg

Condition: used, Year of construction: 1987, machine/vehicle number: 015988798960, Item No. 26303 Technical Data: - Punching force: 700 kN - Punching capacity, e.g.: up to 30 mm diameter in steel, 20 mm - Or with special punching unit: up to 150 mm diameter in steel, 4.0 mm - Stroke adjustable in steps: 0 to 75 mm - Stroke rate: 13 to 48 strokes/min - Overhang: 760 mm - Installation height: 240 mm - Working height: 1040 mm - Drive: 400V / 8.5 kW - Space requirement: approx. W 750 x H 1900 x D 1750 mm - Weight: approx. 1650 kg - Includes: - Foot switch - Center-finding device - Support table with stops and scales Chjdpfx Adszzzi Hj Isc

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Chjdpfxszkmi Ds Ad Ijc Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: good (used), Year of construction: 1978, Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punching press -Manufacturer: Mubea, hole punch type KL 100 -Printing capacity: 100 tons -Punching capacity: see photo type plate Chedpfjwrn U Hsx Ad Iec -Thrust: 500 mm -Accessories: incl. see photos -Dimensions: 1460/880/H2100 mm -Weight: 2660 kg

Condition: used, round bar steel 30 mm square edge steel 28 mm L-beam 90 x 8 mm 150 x 8 mm pressure 35 t total power requirement 2,8 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 0,75 x 1,0 x 1,5 m Cedpfovu Hb Sjx Ad Iohc Profile steel shears combined with: - Foot switch - Length cut

Condition: used, functionality: fully functional, machine/vehicle number: 05073 81 767 830, input voltage: 380 V, input frequency: 50 Hz, used Muhr & Bender KL 1300 Price: 3000 Euros Chodsy Tim Hopfx Ad Isc

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg Codpfxofndy Ns Ad Iehc

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l Chodpfx Adjznng Ss Iec work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. Features: - Electro-hydraulic punch press with long reach - Material/sheet metal scraper - Very large material support table (!) * with adjustable depth stops - Continuously variable stroke adjustment - Freely movable foot switch, including protective cover - Side storage shelf - Assortment of punches and dies - Original operating instructions

Condition: refurbished (used), functionality: fully functional, Year of construction: 2004, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, product height (max.): 15 mm, Mubea / Muhr and Bender KLH 500 / 610: - hydraulic hole punch - Punching force 50 to - stroke 60 mm - punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 in 4.5 mm - throat depth 610 mm Cjdpfxovdiduo Ad Ishc - with support table Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm Chedpfxjpuy H Do Ad Iec - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 weight of the machine ca. 1 t Codpfsvvx E Sjx Ad Iehc

Condition: used, Punching force: 300 kN Dimension(e) e.g. a 20 mm hole in 12 mm steel Stroke triggering via foot switch Assortment of tools is included in the price Very good condition Cjdsxcndyjpfx Ad Ishc

Condition: used, Punching force: 500 kN Cedjz Hx Nxjpfx Ad Ijhc Reach out: 610 mm For example, punch a 30 mm hole in 15 mm steel Large table with foldable material stops Quick change device Stroke triggering via foot switch Assortment of tools is included in the price Weight: 1700 kg

Condition: used, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: foot remote control, For sale is a Mubea / Muhr und Bender BFL 350, a robust combined profile and bar steel shear with punching and notching capabilities. This machine is ideally suited for processing profiles and bar steel, as well as for punching and notching operations. Thanks to its combined design, various processing steps can be carried out with a single machine. Technical data: Manufacturer: Mubea / Muhr und Bender Type: BFL 350 Design: combined profile/bar steel shear with punching and notching capabilities Punching force: 35 t Punching: up to Ø 28 mm with a sheet thickness of 10 mm Codpjz Ahanefx Ad Iohc Punching: up to Ø 23 mm with a sheet thickness of 12 mm Cutting capacities: Round steel: up to Ø 30 mm Flat steel: up to 28 mm Angle steel: up to 90 x 90 x 8 mm Flat steel: up to 150 x 13 mm Flat steel: up to 80 x 16 mm The Mubea / Muhr und Bender BFL 350 impresses with its versatile applications and its solid construction, designed for industrial use. Inspection is possible by prior arrangement. If you have any questions about the machine or would like further information, please do not hesitate to contact us.

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Cedpfx Aju Id Ruod Iohc Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: good (used), Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate Csdpfx Adsik Sl Hs Iohc -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Chsdsxaaipspfx Ad Iec Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: used, Max. Stanzkraft: 500 kN Reach out: 610 mm Quick change device Variablely adjustable spindle Inclusive assortment of punches and dies Cedpju T Nv Defx Ad Iohc Weight: 1700 kg Very good condition

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, Chsdpfxjiqhgqo Ad Isc -Manufacturer: Mubea, punching tool Ø 75 mm -Type: Mubea 75 5-9 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 5-12 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.7 kg Chedoiqhgujpfx Ad Isc