Used Mubea for sale (87)

Condition: used, Max. punching force: 700 kN Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat iron Ledpfx Aoq Iyvven Usab Quick-change device Assortment of tools is included in the price Weight: 3.000 kg

Condition: used, Pressing force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm at the flat bar shear Laodpfxelf Trke An Uob Foot switch for lift release Quick change device Assortment of tools is included in the price

Condition: used, Year of construction: 1993, Max. punching force: 1000 kN Throat: 510 mm Large support table with material stops on the punching side Electrical contact length stop for the shearing side Hydraulic hold-down device for profile and flat steel shears Cuts 500 x 20 mm on the flat steel shear Holes e.g. 40 mm diameter in 22 mm flat iron Assortment of tools is included in the price Weight: 5,000 kg Lasdpof Nwn Ajfx An Ueb

Condition: used, Stanzkraft: 750 kN (punching force e.g. 30 mm hole in 22 mm material), with search device via foot switch for anchoring Overhang: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on the angle/flat bar shear Laedsr R Auzjpfx An Ueb Support table on the punching side Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Assortment of tools is included in the price

Condition: used, Stanzkraft: 550 kN (punch force, e.g. 30 m in 16 mm material), with detection/inspection arrangement via foot switch for anchoring Cuts 350 x 13 mm or 230 mm on the flat bar shear Ledpjt Exprofx An Ueab Overhang: 305 mm Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Support table on punching side Assortment of tools is included in the price

Condition: used, Punching force: 350 kN Lodpsy Saahjfx An Uoab For example, punch a 23 mm hole in 12 mm steel Stroke triggering via foot switch Support table with stops Assortment of tools is included in the price

Condition: good (used), Mubea Muhr und Bender section shear combined Type: KBL 16 Dimensions: 200x75x197 cm LxWxH Lasdpfx Aencc Hujn Ujb

Condition: used, Price: On request Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Machine-weight: 4600kg - Documentation available: No Lajdpfx Answnhd He Ujb - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 110 - Punch throat depth [mm]: 510 - Options: Length stop Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: VP600 760 01, used Mubea VP 600/760 Ljdpfx Anoy Tihwe Ujab Price: VP

Condition: good (used), functionality: fully functional, Punching force: 1000 kN Lodpfey R Eh Iex An Ujab Throat depth: 760 mm Stroke release via foot switch

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: 0166890274834, control type: manual, degree of automation: manual, actuation type: hydraulic, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, throat depth: 650 mm, sheet thickness steel (max.): 15 mm, overall weight: 1,700 kg, total length: 1,500 mm, total width: 650 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), input voltage: 220 V, input current: 26 A, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2023, Equipment: foot remote control, Muhr & Bender (Mubea) Punching Machine KLH 500/610 – incl. punching tools Used punching machine from Muhr & Bender (Mubea), model KLH 500/610, Made in West Germany. Condition: The machine has been professionally inspected by a machinery technician and is in very good, fully operational condition. All functions have been tested. Lasdpfx Ansx Dtp Rs Ujb Technical data (all information without guarantee): – Punching force: approx. 500 kN / 50 t – Max. punching diameter: up to approx. Ø 100 mm (e.g. Ø 30 mm in 15 mm steel) – Max. sheet thickness (steel): approx. 15 mm – Throat depth: approx. 610 mm – Stroke: approx. 60 mm – Drive: hydraulic, manual/conventional control with foot switch – Connection: 220/380 V, 3~, 50 Hz – Power: approx. 7.5 kW – Rated current: 26.3 A / 15.2 A Scope of delivery: – Muhr & Bender (Mubea) KLH 500/610 punching machine – including corresponding punching tools (scope as per photos) Important notes: – The stated price applies to self-collection only. – Dismantling, loading, and transport are the exclusive responsibility and at the expense of the buyer. – Sale is from used stock, without guarantee or warranty. Inspection possible by appointment. I am happy to answer further questions.

Condition: ready for operation (used), Pressure force: 10 tons Ljdjhtq Hfopfx An Usab Projection: 110 mm Required space: 300 x 170 x 680 mm Weight: 32kg

Condition: good (used), for sheet thickness up to: 8 mm flat iron: 80 x 12 mm square iron: 20 mm round iron: 18 mm weight approx.: 88 kg Lajdpjtx Uqaofx An Uob space required: 620 x 250 x 380/880 mm high (with/without base frame)

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release Lasdpfsyvvkwex An Ujb - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, Max. Stanzkraft: 500 kN Lasdpfxju T Nv De An Usb Reach out: 610 mm Inclusive assortment of punches and dies Weight: 1700 kg Very good condition

Condition: used, Year of construction: 1984, hole diameter in sheet thickness Ø 30 in 12 mm hole diameter in sheet thickness Ø 19 in 19 mm Lodsyv N Ebspfx An Usab pressure capacity max. 45 to weight of the machine ca. 1.700 kg

Condition: used, Year of construction: 1989, pressure 50 t throat 610 mm total power requirement 7,5 kW machine weight ab. 1700 kg dimensions 1500 x 650 x 1700 mm Ledpfx Ansyv Nvae Ujab

Condition: used, pressure 40 t throat 175 mm work height max. 1055 mm stroke 30 mm sheet thickness - max. 8 mm Laodjyv Nuijpfx An Ueb total power requirement 4 kW weight of the machine ca. 1020 kg dimensions 910 x 670 x 1930 mm

Condition: used, Year of construction: 2006, Pressing force 100 t diameter 40 mm Lajdpfsyv Nrzox An Uob throat 760 mm total power requirement 8,5 kW weight 3.600 kg Accessories / equipment: - punching table

Condition: used, Year of construction: 2000, pressure 100 t throat 620 mm Lodjyv Ncyopfx An Ujab stroke 0-100 mm hole diameter in sheet thickness 40 in 20 mm no. of strokes 49 Hub/min total power requirement 15 kW weight of the machine ca. 3.500 kg

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Laodpfsfkmr Sox An Ueb Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Condition: good (used), Year of construction: 1999, Hydraulic steel bar shears with hole punch Fab. MUBEA Typ. HIW 750/510 Year 1999 Technical data Make Mubea Type HIW 750/510 Year of manufacture 1999 Punching pressure 75,000 kg Lsdpju Sy Uzefx An Ujab Max. Hole capacity diam. 30 x 22 mm Stroke 70 mm Max. Stroke rate 42/min. Working radius 510 mm Flat steel 450 x 15 mm / 300 x 20 mm Angle steel 150 x 13 mm Square steel 44 mm Round steel diam. 50 mm Installation dimensions L 2.0 x W 1.40 x H 1.80 m Weight approx. 2.5 t Equipment - Electrical contact stop 2000 mm - Tool cabinet - Various tools and accessories as per photos All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Pressing force: 560 kN For example, punch a 30 mm hole in 15 mm steel Stroke triggering via foot switch Lasdpfx Aoxz Ep Djn Ueb Assortment of tools is included in the price

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die Lodpfx Ajiqhg Ujn Ueab -Manufacturer: Mubea, die Ø 90 mm -Type: Mubea 90 Mounting Ø 50 mm -Dimensions: Ø 90 x 115 mm -Weight: 3.4 kg

Condition: used, sheet width - max. 200 mm plate thickness 6 mm flat steel 70 x 7 mm round bar steel 13 mm weight of the machine ca. 50 kg Laodpfxeg Sx R Rj An Uob dimensions of the machine ca. 800 x 500 x 1800 mm