Section Shear - Combined

MUBEA BF 350

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg Dkedpfx Afjpuy H Djmsp - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Year of construction: 2009, condition: new, Belt dimensions: 2000x100 mm Belt speed: 30 m/s Angle adjustable from 30 to 90° Power: 3 kW, 4000 V, 50 Hz Weight: 200 kg Dkodpfxex Davj Afmep Rollers for grinding reamers: 3/4"; 1/2"; 1"; 1 1/4"

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 1,020 mm, folding beam adjustment: 46 mm, bending angle (max.): 135 °, overall weight: 340 kg, total length: 1,350 mm, total width: 850 mm, total height: 1,175 mm, Equipment: documentation/manual, Top and bottom blades removable in segments Includes manual backstop PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2.5 mm Max. working length ----- 1020 mm Max. opening width ----- 46 mm Djdpfxjga T A Ds Afmjkp Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Max. bending angle ----- 0 - 135 degrees Weight ----- 340 KG Width ----- 1350 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm Dsdpfx Afsu Icmhomjkp -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: good (used), Year of construction: 1995, Offer 24315 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment via hand wheels - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - 10 contact grinding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm Dkedpfx Aot Stfhsfmop

Condition: ready for operation (used), Year of construction: 2013, operating hours: 20 h, working width: 650 mm, Belt sander manufactured in 2013. This FELDER FW 650 features a working width of 650 mm and a powerful 7.5 kW motor. It includes a variable feed speed ranging from 3.7 to 16 m/min and an automatic belt centering system. The machine comes with interchangeable sanding pads and a rubber contact roller. If you are looking to get high-quality sanding capabilities, consider the FELDER FW 650 machine we have for sale. Contact us for further details. • Sanding belt dimension: 670 × 1900 mm • Motor power: 7.5 kW (upgraded from 5.5 kW) • Voltage: 3 × 400 V • Duty type: S1 • Variable feed speed: 3.7–16 m/min Dkodpfxsyli H As Afmep • 1 combination aggregate • Interchangeable sanding pad • Rubber contact roller: 85 Shore • Electropneumatic sanding shoe • 2nd feed speed • Automatic belt centering • Automatic star-delta start (SD start) • Extraction connection: 120 mm • Control: Conventional (non-CNC) • Minimum transport height: 2370 mm • Minimum transport width: 2200 mm Additional equipment • Double-sided roller table extension • Abrasive belts included: • 670 × 1900 mm K80 (12 pcs) • 670 × 1900 mm K120 (12 pcs)

Condition: new, Ostas Profile Ring Bending Machine OPK 125 Technical Specifications: • Tool holder, shaft: 120 mm • Tool: 390 mm • Working speed: 2-7.5 m/min • Motor: 15 kW Djdpfx Afexrd Rnsmokp • Dimensions (L-W-H): 2000 x 1700 x 1950 mm • Weight: 4850 kg • 3 rollers are driven separately by a hydraulic motor and planetary gearbox • Hardened standard rolls • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working position • Hydraulic side supports • Digital displays (2 pcs.) • In accordance with CE standard

Condition: ready for operation (used), Year of construction: 2019, Lifting capacity: 2000kg, lifting height: 4000mm, fork length: 1220mm, power: 41kW, fuel: gas, machine dimensions X/Y: approx. 2350mm/1000mm, operating hours: 1793h. Including attachment Bolzoni Shifter 5BSS200F, mast model: 5F20C40, tower height: 2500mm. Documentation available. On-site inspection is possible. Dkjdpfsv Ip Sgsx Afmjp

Condition: used, Year of construction: 1983, round bar steel 50 mm square edge steel 40 x 40 mm L-beam 140 x 13 mm Punch power 900 kN hole punching press: throat 510 mm hole punching press: max. length of stroke 29 mm Dkjdpfovh I T Njx Afmsp hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l + T material 80 x 14 mm no. of strokes 40 / 45 Hub/min total power requirement 4 kW weight of the machine ca. 3,7 t dimensions 2,1 x 0,7 x 2,12 m Accessories: various punches and dies

Condition: new, pressure: 60stroke: 250total power requirements: 4weight approx.: 800messurements (LxWxH): 1.710 x 700 x 2.100Technical DataPress force: 60 tons Motor power: 4 kW Stroke: 250 mm Clear distance between columns: 1,040 mm Piston Ø: 180 x 120 mm Feed speed: 8 mm/s Working speed: 4 mm/s Return speed: 10 mm/s Length: 1,710 mm Width: 700 mm Height: 2,100 mm Weight: 800 kg EquipmentSteel welded construction Any stop position Pressure gauge Safety valve against overload Dkjdpfx Afsd Ab Iqsmop 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Manual right/left cylinder movement Equipment according to CE regulations, operating manual in German and English