Used Eisele Kms 090 for sale (115)

Condition: used, saw blade diameter 275 mm cutting diameter bis 90 mm cutting range flat 120 x 75 mm Djlhccqewglgioqjcp turning speeds 40/80 U/min miter cut 45°/90°/-45° ° weight of the machine ca. ca. 150 kg Manual saw blade feed Accessories: Coolant device Underframe with 2 drawers

Condition: used, Year of construction: 1999, 145 mm ja zwei Geschwindigkeiten Dcslhcsw Syklscqqep cooling ja type 41103M00U2 mm 6791 volt 400 V frequency 50 Hz

Condition: used, Year of construction: 2017, Hydropneumatic operation Profile height: 160 mm below hold-down Max. punching height: 145 mm thanks to 2-way adjustable punch heads Abutment height: 120 mm Dslhcexta Rgjcqqecp Pressing force: 56 kN at 8 bar Weight: approx. 400 kg

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Dslhccexpd D Njqqecp Type: HCS 150 Machine number: Type no.: 49600H0024 Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar

Condition: excellent (used), Year of construction: 2023, saw blade diameter: 460 mm, cutting height (max.): 146 mm, TECHNICAL SPECIFICATION .. max. diameter of saw blade: 460 mm .. cutting capacity round: 146 mm .. cutting capacity square: 138 mm .. mitre cutting: no .. .. oblong: 250 mm .. .. .. x: 100 mm .. .. to: 220 mm/min DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2200 mm Djlhccexryqkoqqecp .. space requirements -front/back-: 1950 mm .. total height: 2000 mm .. total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%

Condition: excellent (used), Year of construction: 2007, Fully automatic operation for saw blades up to D 500mm hydro-pneumatic saw blade feed Siemens PLC control with touch panel Reversal device with up to 5-fold stroke (max. 5000mm), via electronic material feed unit, equipped with pneumatic horizontal clamping device max. profile width 285mm Cutting gap expansion on both sides of the saw blade Infinitely variable speed control On the infeed side: vertical and horizontal clamping device; on the outfeed side: horizontal clamping device Pneumatic ejection slide Pneumatic dosing spray system with level monitoring Extraction nozzle for connection to a chip extraction system Storage table with hardwood surface 1500x2500mm, pneumatic cross slide Delhccexvbvvsqqscp Horizontal loading magazine model HLM: 4-strand timing belt conveyor 6 compartments, 285mm wide Conveyor length 1850mm, profile length 2700-6500mm

Condition: good (used), Year of construction: 1987, Saw head with pneumatic feed cylinder for aluminum and non-ferrous metals Saw blade size 370 mm, 1700 + 3400 rpm Dcelexptxpohccqqsp • Feed cylinder with pneumatic control and limit switch • Double clamping arm (pneumatic)

Condition: used, Year of construction: 1977, miter ja clamping ja kW mechanical Senkung Dcelhjvxlthsccqqsp weight of the machine ca. 500 kg

Condition: used, Max. punching force: 100 kN Dsljxrmz Ashccqqscp Max. stroke: approx. 50 mm (adjustable via clamping lever) Stroke activation via foot switch Weight: approx. 600 kg

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg Dolhccqevdk A Eeqocp We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE RUN CUTTING SPEED ..... 0 - 40 MM SEC. INFINITELY VARIABLE REVERSE 135MM/S MATERIAL FEED SPEED ..... MAX. 350 MM/S Dcolhjquuufjccqqjp TENSION FORCE ..... MAIN CLAMP 10500N

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Cutting capacity: at 90° & 45°, round: 120 mm at 90°, flat: 170 x 100 mm at 45°, flat: 120 x 100 mm at 90°, square: 100 mm Delhcexln Ukocqqjcp at 45°, square: 95 mm 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Weight: 425 kg Required space: 900 x 800 x 1800 mm

Condition: good (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: 27252, saw blade diameter: 275 mm, cutting height (max.): 140 mm, cutting range round steel at 90°: 80 mm, total length: 680 mm, total height: 1,750 mm, total width: 680 mm, overall weight: 270 kg, type of input current: three-phase, rotational speed (min.): 10 rpm, rotational speed (max.): 80 rpm, space requirement length: 2,120 mm, input voltage: 380 V, length stop: 1,000 mm, working height: 950 mm, saw drive: 1,400 W, Equipment: documentation/manual, The machine has been in operation since it was purchased new in 1972, works perfectly, and will remain in use until sold. INCL. 6 SAW BLADES 275 x 2.5 x 2.5 x 40, freshly reground 2021: Coolant pump switch replaced 2020: Overhaul at Bider Hauser AG - Drive motor replacement - New saw blade flange - New gear oil Base area 680 x 680 mm Length stop right 1000 mm (1310 mm from saw blade) Workpiece support left 800 mm from saw blade Speeds: 10/20/40/80 rpm Cutting ranges: Hollow flat profiles / angle iron: - Straight --> 140 x 70 mm - Mitered --> 100 x 70 mm Delhccev Uk Iioqqecp Pipes --> 3" diameter Solid material --> 80 mm diameter Square material --> 50 x 50 mm

Condition: used, Year of construction: 1981, turning speeds 40/80 U/min 0025 voltage 380 V Dcelhccqevu Hlkjqep clamping ja kW miter ja weight 700 kg

Condition: used, Max. saw blade diameter: 350 mm Manual saw feed 2 sawing speeds Coolant lubrication Dcelhccqexn Ivgjqop

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 Dolhstxkprsccqqocp -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: used, Year of construction: 2014, machine/vehicle number: 0101-250007, The Behringer Eisele HCS 160 MF Straight Cut Fully Automatic Metal Circular Saw is a high-quality, robust machine specifically designed for professional use and maximum cutting performance in metalworking, additionally engineered for multi-shift operations. It offers an excellent combination of power, precision, and versatility, making it particularly suitable for large production runs. The fully automatic saw comes equipped with a comprehensive material loading and unloading system. The loading magazine is positioned on the infeed side, while on the outfeed side, short pieces can be discharged from the conveyor into designated containers at three different positions using a pusher via the unloading device. Dcolhoxl R Nkeccqqop

Condition: excellent (used), Year of construction: 2007, Saw blade diameter: 370 mm Dslhccsxlgz Noqqscp Cutting capacity flat at 90/45/30°: 200 x 100 / 140 x 100 / 100 x 100 mm Cutting capacity square at 90/45/30°: 120 / 100 / 90 mm Cutting capacity round at 90 & 45 / at 30°: 130 / 105 mm 2 saw blade speeds Drive motor: 2 / 2.6 kW Weight: 430 kg Space required: 800 x 700 x 1770 mm

Condition: refurbished (used), Year of construction: 2024, Eisele VA-L-350 Retrofit Fully automatic high-performance sawing machine with feed chain magazine for non-ferrous metals and plastics Manufacturer: Eisele Type: VA-L-350 Overhaul year: 2024 Saw blade, carbide: 350-400 mm Drive power, saw motor: 15 KW Saw motor speed: 1500 - 6000 min-1 Saw blade cutting speed: 1650 - 7500 m/min Saw blade feed steplessly adjustable: hydraulic Saw height control infinitely variable: fully electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 200 x 100 mm Working range round 90° max.: 130 mm Feed length single stroke: 5-900 mm Multiple stroke 5-9999 mm Feed speed servo-controlled feed unit: 350 mm/s Compressed air connection on site: 6-8 bar Weight (saw)approx.:1600 kg (magazine)approx.:2200 kg (optional) Dimensions LxWxH (saw)approx.: 1800mm x1300mm x1950mm (magazine)approx.: 7300mm 3900mm x1200mm (optional) Installation dimensions LxWxH approx.: 9200mm x4800mm x2800mm Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The PLC control system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces the resulting noise emissions to a minimum. The machine is overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to Siemens S7 - Renewal of the ball screw drive - New hydraulic lines (hydraulic version) - New pneumatic lines (pneumatic version) - New pneumatic and/or hydraulic components - Overhaul of the control valves - Optimization of the suction performance - Overhaul of the Menzel minimum lubrication system - Replacement of general wear parts - Overhaul of the cab - Replacement of all bearings and wear parts - Replacement of servo and frequency converter The machine is also equipped with Djlhcsuizlpjcqqocp - Reinforced motor 15 KW - Minimization of the material residue - Soundproof cabin - Splitting extension (for a high-quality cut surface without return marks) Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Mass clamping device for parallel sawing of several workpieces - Hydraulic clamping system - Flat magazine for automatic feeding of primary materials up to 6 m long - Roller conveyors on the infeed side - Roller conveyors on the outfeed side - Delivery and installation on your premises - Training of your employees

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Delhcef Dwa Uscqqscp Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Dcjlhccqjxn Iq Doqop Spray device Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab The machine also has: - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Mass clamping device for parallel sawing of several workpieces Delhsuiy Hreccqqecp - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) - Delivery and installation on your premises - Training of your employees

Year of construction: 2011, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Delhcoxl Dz Tocqqjcp Only 4400 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Condition: refurbished (used), Year of construction: 2024, Overhaul year: 2024 Saw blade VHM / HSS: 315 - 360 mm Drive power saw motor: 15 KW Infinitely variable speed: 15 - 130 min-1 Saw blade cutting speed (350 mm): 16.4 - 142.8 m/min Saw height control infinitely variable: electronic Working range square 90° max.: 100 x 100 mm Working range round 90° max.: 110 mm Feed length 5-970 mm (9999 mm multiple stroke) Feed speed AC servo max.: 300 mm/s Compressed air connection on site: 6 bar Saw weight approx.: 1800 kg Dimensions LxWxH: 1900mm x 1250mm x 2100mm Footprint LxW: 1900mm x 1250mm Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The HMI interface for controlling the machine ensures simple and problem-free operation of the system. Following a completed retrofit, the machine is in mint condition, both technically and visually. A viewing of this sawing system is possible at any time. The machine will be completely overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to PLC control Siemens S7 - Renewal of the ball screw drive with servo control - New electrical components - Renewal of the pneumatic lines - New pneumatic components - Overhaul or renewal of the hydraulic lines - Overhaul or renewal of the hydraulic components - Overhaul of the cab Dcolsuizinohccqqsp - Overhaul of the motors - Replacement of all bearings - Replacement of general wear parts The machine also has - Reinforced motor 15 KW - Soundproof cabin - Splitting extension (for a high-quality cut surface without return marks) - Frequency control motor - Minimum quantity lubrication - Automatic central lubrication system - Pneumatic chip space cleaning on the saw blade Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Mass clamping device for parallel sawing of several workpieces - Roller conveyor 4m/ 6m - Special roller conveyor 4m/ 6m for bundle clamping - Flat magazine for automatic feeding of up to 6m long primary materials - Online support connection - Delivery and installation on your premises - Training of your employees

Year of construction: 2006, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Dolhccqevcmireqjcp Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Only 2200 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)