Used Moisture for sale (299)

Condition: used, Liebisch KEA 300 Constanzo Functional condensate water test device for material and coating testing Nodjzii Aqopfx Aqwoda Description: This device is designed for performing condensate water or water vapor tests in accordance with common standards (e.g., DIN EN ISO 6270). It is ideal for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. The design is robust, low-maintenance, and perfectly suited for research, laboratory, and quality control applications. Technical specifications: Manufacturer: LIEBISCH Model: KEA 300 Constanzo Nominal power: 1,400 W Chamber dimensions: approx. 500 × 450 × 500 mm (W × H × D) Voltage: 230 V / 50 Hz Chamber material: Stainless steel, corrosion-resistant Controls: None / manual operation Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data; specifications may be updated!) If you have any further questions, feel free to contact us by phone.

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, Nedpfsrhidmjx Aqwsda located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: new, Year of construction: 2025, 🚢 20ft Storage Container – Like New (Year of Manufacture 2025 / 2026) – Available Immediately! High-quality shipping container in nearly new condition – perfect for use as storage space, workshop, site container, or for professional transport applications. ⭐ Your Advantages at a Glance 🆕 Year of manufacture 2025 / 2026 – like new 💪 Very robust steel construction (2 mm wall thickness) 🌧️ Wind- and waterproof 🔐 Securely lockable with 4-bar door locking system 🚚 Equipped with CSC plate – suitable for global shipping 🌬️ Ventilation system to prevent moisture build-up 🪵 Premium wooden floor 🛠️ Forklift pockets integrated in the base 📏 Dimensions & Technical Specifications 📐 External dimensions: 6,058 × 2,438 × 2,591 mm Nsdervg Rtspfx Aqwjda 📦 Internal dimensions: 5,898 × 2,350 × 2,390 mm 🚪 Door opening: 2,343 mm 🧱 Volume: approx. 33 m³ ⚖️ Empty weight: approx. 2.25 t 🏋️ Load capacity: up to 30 t These containers impress with their durability, security, and versatility – an ideal solution for commercial, construction, trade, or demanding private use. 📬 Contact us now – we will provide you with a customized offer! 👀 Additional container sizes and variants available. 🚛 Nationwide delivery within Germany possible (for an additional charge).

Condition: ready for operation (used), Year of construction: 1996, Printing units outside/inside: 2/1, doctor blade units: 3, production capacity: 800 envelopes/min, window unit: Mini-Splice 356 CMG, roll/splicer: Winkler + Dünnebier 191, web guiding: BST EKR 1000, gumming: standard remoist (moisture-activated gumming for sealing flaps), ink pumps: 2, extraction: window punching waste. Documentation available. An on-site inspection is possible. Ndodpfx Aqexbrxfjwea

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, Equipment: CE marking, Own production smoke trolleys, Lithuania currently offers 4 complete sets of drying trolleys with trays available from stock. Were used as a demonstration model in the showroom. Can be sent one set at a time. New price 3500 EUR per set Nsdpfx Aqsrftxfowsda Full manufacturer warranty is provided by HySpriz. This is an ideal trolley solution for drying products such as jerky, kabanos, fish snacks, and pet sticks. It is also suitable for fish defrosting processes and even baking applications. The mesh structure ensures excellent air convection through all product levels, resulting in uniform drying and stable product quality. We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. The trolley is fully compatible with RK50U, SAS200, and FARS200 systems and is ideal for use in drying chambers, smokehouses, and climate-controlled environments with air dehumidification. The external dimensions of the trolley are 2000 × 1010 × 1010 mm. The frame is made of corrosion-resistant AISI 304 stainless steel using a robust 40 × 40 × 1.3 mm profile. It includes 30 levels with a 55 mm spacing between tiers and special locking systems to prevent trays from falling during movement. For mobility, the trolley is equipped with six heavy-duty pendulum swivel casters (Ø125 mm), allowing full rotation even when loaded. Each trolley includes 60 stainless steel trays sized 900 × 500 mm. The trays are made of corrugated stainless steel mesh, 5x5 mm. can be optionally equipped with Teflon liners (5,8 EUR/pcs) Wire thickness is 0.7 mm for high rigidity. Each tray has a 15 mm perimeter rim for improved airflow and heat distribution. Reusable non-stick Teflon inserts are included, ideal for sticky or soft products. Total load capacity is up to 400 kg per trolley, with up to 7 kg per tray. The system supports both low-temperature dehydration and high-temperature processing. Compatible with chambers using horizontal or vertical airflow. Designed for easy cleaning, hygiene, and long service life. This trolley ensures efficient moisture removal and uniform air distribution, which directly improves drying performance and final product shelf life.

Year of construction: 2002, condition: used, This listing is for the Ehret STE 1610/2/100 Sterilising Oven. The unit is in full working condition and is ready for immediate use. Overview The Ehret STE 1610/2/100 Sterilising Oven is a high-performance dry heat sterilizer designed for reliable and consistent sterilization of laboratory and pharmaceutical materials. Manufactured by Ehret, a trusted German brand in thermal processing equipment, the STE 1610/2/100 delivers precise temperature control and robust performance, making it ideal for applications requiring sterilization without moisture, such as glassware, metal instruments, and heat-stable laboratory components. Key Features Precise Dry Heat Sterilization High-Temperature Range: Operates up to 250 °C, suitable for complete sterilization and thermal decontamination. Uniform Temperature Distribution: Advanced air circulation ensures even heat distribution throughout the chamber. Validated Sterilization Cycles: Ideal for sterilizing glass, metal tools, and other heat-resistant materials with accuracy and repeatability. Robust Construction & Ergonomic Design Durable Stainless Steel Chamber: Corrosion-resistant and easy to clean, suitable for repeated sterilization cycles. User-Friendly Controls: Digital temperature controller with display for accurate setpoint adjustment and monitoring. Safety Features: Over-temperature protection, door interlock, and visual/audio alarms for enhanced operational safety. Technical Specifications Model: STE 1610/2/100 Temperature Range: Ambient +5 °C to 250 °C Chamber Volume: Approx. 100 litres Heating Method: Electrically heated with forced air circulation Temperature Control Accuracy: ±1 °C Construction: Stainless steel inner chamber; powder-coated steel exterior Control System: Digital PID controller with safety cut-off and time functions Power Supply: 230 V / 50–60 Hz (depending on configuration) Applications Pharmaceutical Laboratories: Dry sterilization of vials, stoppers, and instruments Medical Facilities: Sterilizing surgical tools, metal parts, and reusable components Research & Diagnostics: Sterilization of labware and experimental setups Industrial & QA Labs: Heat treatment, drying, and thermal conditioning of materials System Components Electrically heated drying/sterilization chamber Forced air circulation fan for uniform heating Digital control panel with setpoint and actual temperature display Safety thermostat with alarm system Removable shelving for flexible loading Quality Assurance All Ehret STE ovens are manufactured in compliance with DIN and ISO standards and undergo rigorous quality testing at the factory. Designed for reliable long-term use, the units support calibration, validation (IQ/OQ), and GMP documentation where required. Benefits Reliable Sterilization: Proven performance across thousands of cycles Accurate & Uniform Heating: Ensures consistent results and safe sterilization Njdpfx Asxhflxsqwoda Low Maintenance: Durable components and easy-to-clean surfaces Safety-Compliant: Built with laboratory and industrial safety standards in mind Compact Footprint: Fits easily into lab or cleanroom environments Conclusion The Ehret STE 1610/2/100 Sterilising Oven is a dependable, precision-controlled dry heat sterilizer built for modern lab and pharmaceutical environments. Its combination of German engineering, validated performance, and operator-friendly design makes it a trusted solution for high-integrity sterilization processes.

Year of construction: 2013, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 20910-01, Unused Hosokawa Bepex model BX 150 stainless steel (AISI 316) basket extruder for low pressure extrusion. Products with loose structure, large surface and good forming properties are produced with this machine. The product consists of a paste of low flow characteristics and low moisture content. The product to be processed is transported by the inlet into the machine. In the product area are two rotors which works in oposite directions to each other. - The upper 2-arm rotor with angle rotor and additional stirrers mixes and conveys the material down. Rotor is driven through gearbox by 0.55 kW, 60 Hz electrical motor, adjustable speed from approx. 14 - 139 rpm. - The lower 3-arms rotor is equipped with curved arms and rotor knives. Through the lower 3-arm rotor the product is compressed and forced through a cylindrical screen basket. The diameter of the granules results from the perforation diameter in the screen basket. Rotor is driven through gearbox by 3.0 kW, 60 Hz electrical motor, adjustable speed from approx. 15 - 144 rpm. Ndjdpfx Aqst Tvx Tswsa Includes (2) extrusion screens 2 mm dia x 1.2 mm thick, switchboard with integrated control panel. Mounted on stainless steel frame with (4) wheels.

Condition: excellent (used), Complete material drying and feeding system by Motan — ready to connect to injection or blow molding machines. The system includes three integrated components: 1. Material vacuum loader (Motan METRO series) Automatic pellet conveying from bag/bulk bag to hopper Electric motor with vacuum turbine Dust filter and discharge valve 2. Stainless steel drying hopper Conical, insulated stainless steel construction Internal heating element and temperature sensor Estimated capacity: [80 / 120 / 200] liters — to be confirmed 3. Motan LUXOR desiccant dehumidifier (orange cabinet) Twin-tower molecular sieve dehumidification Automatic regeneration cycle Process air temperature: up to 180°C (depending on material) Dew point: −40°C (typical for Motan LUXOR series) Integrated PLC control 380V three-phase Suitable for PMMA, SAN, PC, ABS, PET, PA (nylon), PE, PP, PS and all hygroscopic engineering plastics. Essential for cosmetic, optical, and technical injection molding. Application Pre-drying and feeding of plastic granules to injection molding machines, blow molding machines, and extruders. The system removes moisture from pellets to prevent surface defects (bubbles, streaks, hydrolysis) in finished parts. Technical specifications Brand: Motan (Motan-Colortronic) Model: LUXOR [80 / 120 / 200] — to confirm with rating plate Year: [approx. late 1990s / early 2000s] Voltage: 380V three-phase Ndsdjzhcrvjpfx Aqwea Origin: Germany Configuration: Complete dryer + hopper + loader

Year of construction: 2003, condition: used, Manufacturer: Zanchetta Model: Piraña Year: 2003 Nsdpfx Aqex R Dk Iowsda   Type : Calibrator for granulated or wet products Applications: pharmaceutical, food, chemical, cosmetics …   Installed electrical power: 3 kW Power supply : 380V – 3 phases – 50 Hz Motor speed : 1440 rpm Dry air consumption: 15 L/min at 2.5 bars Available basket diameters: min Ø 800µ – max 4500µ Treated product moisture content: max. 10 %. 10 % Noise level: < 85 dBA Dimensions: 700 x 1500 x 1400 mm Height to drum axis: 900 mm Product infeed diameter : 150 mm Product outlet diameter : 150 mm Control panel with speed variation Paper documentation available

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Ndodponxk Ixofx Aqwea

Condition: used, maximum load weight: 13,330 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, loading space length: 6,150 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, Year of construction: 2026, Equipment: ABS, - 2 steerable axle sets ECO/low-maintenance with disc brakes, each with a load capacity of 9,000 kg - Dual-circuit EBS pneumatic braking system according to EC guidelines, with ALB control and parking brake as a spring-loaded accumulator, automatic linkage adjusters. Duomatic brake connection - Air suspension with raising and lowering function - Chassis: Stable welded construction made of high-strength fine-grained steel sheets, formed and welded to prevent twisting. The longitudinal and transverse beams form a single plane with the main frame. - Tires: 4 x 385/55 R22.5 on steel rims - Fixed drawbar with DIN towing eye 40 mm (length-adjustable drawbar) - Electrical system: According to StVZO guidelines, in a protected installation, 5-chamber tail lights integrated into the underrun protection, Euro plug, 15-pin socket, 2 red position lights above the rear portal. ABS with connection cable. 1 marker light mounted on each side of the rear frame. - Floor: Made of 24 mm thick vehicle construction panels, film-coated underneath to prevent moisture penetration, with a non-slip screen-printed texture on top, laid flat and sealed around the edges. - Front wall: Made of special vehicle construction plastic panels, closed up to the roof, with a central strut laid flat. Without a front wall cover at the top front. - Side walls: ZIKUN flap swivel mechanism, continuous sideboard, horizontally divided. By folding down the lower sideboard, the upper wall is mechanically swung onto the roof. The lever kinematics, supported by a spring pull, is attached to the front wall. Sideboard upper parts made of special aluminum composite panels, 25 mm. - Fixed roof consisting of steel stringers with permanently glued aluminum sheets, powder-coated in white RAL9010 on the outside - Steel impact rail welded on both sides as a forklift protection. Rubber impact buffer mounted at the rear under the rear door - PVC quarter fenders on the axles - 1 set of mud flaps for the fenders - 2 wheel chocks with holder - Lateral underrun protection, galvanized and foldable brackets, aluminum planks with rounded end pieces - Continuous splash guard under the underrun protection at the rear - Complete body sandblasted, primed and painted in a single color - Chassis: MAN graphite black - Outer frame and body: RAL 9010 pure white - Inspection 60001-0002 TÜV approval trailer/semi-trailer - Drawbar fork length-adjustable - Central lubrication strip for slewing ring and drawbar - 2-leaf rear door made of aluminum sandwich panels with internal rotating bar locks. The doors have a smooth surface - Clad the front wall in the lower area with a 280 mm high aluminum profile as impact protection. - 2 x retractable access steps in the lower part of the folding wall on the left and right, approx. 600 mm long - Integrated cargo securing system with CRS system (4 rows) in the roof and floor, including 4 load securing bars with 6 horizontal spring telescopic rods (CRS system Ancra-Jungfalk, Dekra tested according to VDI 2700 Code XL) - Interior light as an LED spotlight, switched via parking lights, with a separate switch - Additional interior lighting as an LED spotlight mounted at the rear - 2 x pallet stopper on the left and right - Tire pressure monitoring system according to ECE R 141 - Additional camera on the trailer for rear view video system, camera at the rear above the rear door Nsdpfszp Ak Uex Aqweda

Condition: like new (used), Year of construction: 2014, briquette diameter: 150 mm, overall weight: 3,000 kg, power: 30 kW (40.79 HP), Capacity: 450-500 kg/h Max. pressure force: 1700kg/cm2 Nedsqd Uy Aopfx Aqwsda Batch moisture content: 15% Length: 1800 mm Width: 1800 mm Height: 1900 mm Transport height: 2200 mm Weight: 3000 kg Total power: 33 kW

Condition: good (used), Year of construction: 2002, functionality: fully functional, TECNOVA MINI / 60 repelletizing machine Type: ES 60 N / 35D DEG Year of manufacture: 2002, little used, completely refurbished in 2023. Availability: Immediately. Current condition: Can be viewed in operation. Screw: 60, L/D ratio: 35, Capacity: 120-140 kg/h, Feeding screw: yes, Degassing system: yes, Cutting head type: head cutter, Suitable materials: PE/PP/PS. Other specifications: 8 mm diameter granules, Ndsdpfx Aqew U Swpewja Moisture max. 3% Foil silo, capacity 2 m3, Vacuum pump for degassing, Temperature control panel, Pressure control, Water cooling, transport, Venturi, cyclone and pipes, Dimensions: 6.40 m long x 2.10 m wide x 4.30 m high Built-in power: 30 Kw. + film granulator Meccanoplastica Type 3140 (1998) !!! Price included!!! For sale with spare parts: screw barrel, heating elements, filter changer, head cutter insulation, knives for grinder, compactor, silo bearings, cyclone, head cutter.

Condition: ready for operation (used), Year of construction: 2007, A Haver & Boecker bagging machine is available as a test machine for filling various powdery bulk materials including an MEC 3 weighing electronics. Weighing range: 10kg-50kg, adjustment increment: 50g, bag filling weight: 25kg, bagging capacity at 25kg: approx. 180/h, max. product moisture: 0%, product filling temperature: 20°C, bag material: 2-layer paper/PE with filter fleece. Documentation vorhanden. An on-site inspection is possible. Njdpfx Aqox U Dv Sjwjda

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS Ndodpfx Aqowzmcbjwoa During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. This is a complete compact system, built on a base frame, consisting of the following components: Ndodpfx Aqsxlif Rewea - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m - Drum screen for dedusting and cooling of pellets The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! The system is designed and prepared for operation with a second press! Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!!

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer for sale a high-quality UNTHA LR 1000 industrial wood shredder, in almost new condition, having been used only for approximately 1 hour of testing operation. This machine is a reliable and efficient solution for processing wood waste such as offcuts and solid wood materials, delivering consistent output size and excellent performance. Key Features & Benefits Condition: Practically new – only test run (~1 hour) Brand: UNTHA (Austria – premium shredding technology) Model: LR 1000 Robust industrial design for long-term operation High throughput capacity: approx. 600–700 kg/h (beech offcuts) Uniform output size: approx. 40 mm (30 mm screen installed) Ideal for woodworking companies, carpentry shops, and recycling operations Technical Specifications Material Input Max. input size: approx. 600 × 120 × 55 mm Feed system: tipping box approx. 1.0 m³ Moisture content: < 11% Metal content: not allowed Machine Performance Main drive: 2 × 18.5 kW Hydraulic power: 1.1 kW Rotor speed: 98 rpm Throughput: approx. 600–700 kg/h Cutting System Rotor diameter: 300 mm Number of knives: 27 pcs Cutting system: UNTHA cutter system Screen size: 30 mm Electrical & Control Voltage: 400 V / 50 Hz Control system: Siemens SIMATIC S7-1200 (CPU 1214) Njdpfxjzgr Hts Aqweda Dimensions & Weight Machine dimensions: approx. 1,704 × 1,863 × 1,630 mm Infeed opening: 1,000 × 1,050 mm Total weight: approx. 2,400 kg Included Equipment 45° machine configuration (improved feeding of bulky material) Horizontal discharge screw conveyor (closed design) Full bin indicator with automatic stop Machine support legs (~100 mm) External interface contact

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, input voltage: 400 V, total height: 2,890 mm, total width: 2,440 mm, total length: 2,890 mm, Mobile Welding Station 10ft for PE/PP Pipes incl. HÜRNER CNC 500 (SST Series) Weather-Independent Butt Fusion Welding at Industrial Standards Stop building makeshift welding tents on site. This compact 10-foot welding station (SST 10 / 500) is a self-contained, ready-to-use production cell for demanding PE/PP pipeline construction. Plastic weld seams do not tolerate drafts or moisture—this container guarantees consistent, standard-compliant environmental conditions and complete documentation. Your advantages in pipe handling: The bottleneck on site is the handling. This station is uncompromisingly designed for ergonomic efficiency. Pipe sections are passed directly through the container using the 800x800 mm end-side pipe doors (with integrated brush seals). The built-in 1,000 kg lifting table, mobile pipe lifters, and an electric chain hoist make handling pipes up to OD 450 mm an efficient one-person job. Plug & Play: Connect power and start welding. Technical Data (SST 10 / 500): Container: 10" High Cube, Double Door, One Way (incl. chequer plate steel floor) Welding machine: HÜRNER CNC 500 ECO 2.0 USB & Bluetooth data management Working range: OD 200 to OD 450 mm (including reduction inserts) Lifting technology: Electric lifting table (1,000 kg), electric chain hoist with trolley/manual trolley (3m lift) Pipe handling: 2x universal mobile lifters (up to DN500), 2x pipe doors (800x800 mm) Power supply: 32A & 16A CEE (400V), 3x 16A Schuko (250V IP54), RCD 63A Lighting: 2x LED floodlights (24,000 lm, 5000 K), 2x LED moisture-proof fittings Condition: Fully prepared for welding (CE), incl. DGUV inspection & 2x thick coat paint (color of your choice) (Note: Supplied without power generator) Available configurations in this series: This listing refers to version SST 10 / 500. We manufacture these stations in four standardized performance classes to suit your project: SST 10 / 355: 10-foot container, suitable up to OD 355 mm Nedjyzn Ifopfx Aqwjda SST 10 / 500: 10-foot container, suitable up to OD 450 mm (offered model) SST 20 / 355: 20-foot container (extended work area), suitable up to OD 355 mm SST 20 / 500: 20-foot container (extended work area), suitable up to OD 450 mm Custom modifications are available on request. Contact us for a detailed quotation.

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined Nsdpsyb Nc Njfx Aqwjda CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications Njdpfxjyb D Dbj Aqwjda The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: excellent (used), functionality: fully functional, total height: 2,175 mm, total length: 13,670 mm, total width: 2,050 mm, The CES CO2 cryogenic tunnel is a high-performance solution for rapid product freezing in industrial environments. Thanks to its use of carbon dioxide, this tunnel provides rapid, efficient cooling, ensuring that food quality and properties are preserved. In fact, it is designed to guarantee uniform freezing while reducing moisture loss. Nedpju Iu U Dofx Aqwsda What's more, the CO2 CES cryogenic tunnel stands out for its ability to handle large volumes of product, making it an ideal choice for large-scale operations. What's more, it offers flexibility of use, adapting to a variety of product types while ensuring a continuous workflow. Thanks to its cutting-edge technology, it enhances productivity while reducing energy costs, optimizing freezing processes in the food industry. In short, this machine represents a reliable and efficient solution to the demands of industries requiring rapid freezing, while guaranteeing rigorous compliance with quality and safety standards. Technical specifications Cooling Dimensions: 13670 x 2050 x 2175 mm (L x W x H) Usable dimensions: 11960 x 1201 (L x W)

Condition: new, Year of construction: 2026, The HDE Series Hopper Dryers are designed for efficient drying of plastic granules before extrusion, injection molding, and blow molding processes. Moisture contained in plastic materials can cause defects such as bubbles, silver streaks, poor surface finish, and reduced mechanical properties. The HDT Series effectively removes surface moisture using a controlled hot-air circulation system, ensuring stable processing conditions and consistent product quality. All material-contact surfaces are manufactured from stainless steel, preventing material contamination while providing excellent corrosion resistance and long service life. The precision cast aluminum hopper offers excellent heat retention and ensures uniform drying throughout the entire material batch. A specially designed hot-air diffuser distributes heated air evenly inside the hopper, significantly improving drying efficiency. The low-noise blower delivers stable airflow while preventing dust from entering the material. The hopper is equipped with a material level inspection window, an auto loader mounting port, and safety systems protecting against overheating and motor overload. The modular design allows quick cleaning and fast material changes, making the HDT Series suitable for continuous industrial operation Technical Specifications Hopper Dryer HDE-25 • Hopper Capacity: 25 kg • Blower Power: 135 W • Heater Power: 3.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 3.6 kW • Installation Size: 150 × 150 mm Ndjdpfezv Emlox Aqwsa • Dimensions (L × W × H): 830 × 580 × 840 mm • Weight: 34 kg Hopper Dryer HDE-50 • Hopper Capacity: 50 kg • Blower Power: 155 W • Heater Power: 4.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 4.7 kW • Installation Size: 160 × 160 mm • Dimensions (L × W × H): 920 × 590 × 940 mm • Weight: 45 kg Hopper Dryer HDE-100 Technical Specifications • Hopper Capacity: 100 kg • Blower Power: 215 W • Heater Power: 6.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 6.7 kW • Installation Size: 178 × 178 mm • Dimensions (L × W × H): 1070 × 700 × 1080 mm • Weight: 68 kg

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Integrated Refrigeration Air Dryer The LUFT series screw compressor from the Polish brand CORMAK represents the latest advancements in pneumatic technology, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features: Innovative Design Our compressors are built on advanced engineering and European manufacturing precision. The solid construction, enhanced with modern components, ensures long-lasting and reliable operation in all working conditions. Integrated Refrigeration Dryer The COMPACT version with an integrated dryer offers space-saving and comprehensive functionality in a single unit. The built-in refrigeration dryer ensures clean and dry air, protecting your system from corrosion and damage. Quiet Operation & Comfort Designed with attention to detail, our compressors operate with exceptionally low noise levels. Effective soundproofing and vibration reduction systems provide a comfortable working environment, enhancing operator focus and well-being. Smart Control System The intuitive MAM electronic control panel acts as the command center of your compressor. It allows precise monitoring of parameters, scheduling of maintenance, and quick diagnostics, ensuring system stability and protecting key components. Tailored to Your Needs We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems to perfectly match the specific requirements of your industry. Dynamic Operating Pressure Automatic pressure adjustment ensures that the compressor delivers exactly the amount of compressed air needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable Development We prioritize environmentally friendly solutions. The energy-saving technologies used in our compressors not only reduce your energy bills but also minimize environmental impact. The heat recovery option allows for maximum energy utilization. Integrated Refrigeration Dryer – Top-Level Air Quality Two-Stage Drying System: Provides effective moisture removal and protection for your pneumatic system. Variable-Speed Fan: Automatically adjusts cooling performance to match working conditions, optimizing energy consumption. Dual Filtration System: Includes a pre-filter with 3.0 µm precision for removing larger solid contaminants, and a fine filter with 0.1 µm precision that captures oil aerosols and other fine particles, ensuring the highest level of air purity. Technical Specifications Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Air Delivery (0–6 bar) 990 L/min Air Delivery at 6 bar 950 L/min Air Delivery at 8 bar 950 L/min Ndsdpfxexmg A Ao Aqwea Air Delivery at 10 bar 930 L/min Outlet Connection Diameter (G) 3/4" Dimensions (L x W x H) 1320 x 650 x 945 mm Weight 320 kg

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 700 kg, total length: 2,860 mm, total width: 1,230 mm, construction height: 1,700 mm, Fully operational exhibition dryer, Ø 1090 mm We are offering our fully operational exhibition dryer with a diameter of 1090 mm. The unit is very compact and practical in terms of required space and easy relocation. Technical Details: Ndsdoxbz Hropfx Aqwsa Connection: only a water connection for spraying and a 16A power plug are required Heating system: 4 kW electric heater Wood moisture measurement at 3 measuring points Plug-and-play design – ready for immediate use Advantages: Ideal for small carpentry workshops Easy to transport and flexible positioning

Condition: used, diameter / mm Cutting (quantity) / 0 weight / kg Ultratroc SD 0060 / SD 304 Refrigerated Air Dryer – 230V / 16 bar / R134a For sale is a professional Ultratroc refrigerated compressed air dryer (made by Ultrafilter), designed for the reliable removal of moisture from compressed air systems. This industrial dryer protects downstream equipment, pneumatic tools and machinery against corrosion and damage caused by condensate and humidity. Technical Specifications: Manufacturer: Ultratroc / Ultrafilter Model / Type: SD 0060 / SD 304 Year of manufacture: 2009 Maximum working pressure: 16 bar Refrigerant: R134a Refrigerant charge: 0.40 kg Maximum compressed air temperature: 60 °C Ambient temperature range: +2 °C to +50 °C Power supply: 230 V Phases: 1/N Frequency: 50 Hz Power consumption: 0.260 kW Protection class: IP20 Max. fuse protection: 16 A Condition: Used industrial equipment Shows normal signs of use due to age and operation Removed from an industrial environment / warehouse stock Suitable as a replacement unit or for installation in compressed air systems Features: ? High-quality industrial design ? Compact and robust construction ? Low energy consumption ? Suitable for various compressed air applications ? Ready for immediate availability Ndsdezn Akxjpfx Aqwoa Scope of delivery: Ultratroc SD 0060 refrigerated air dryer as shown in the pictures. Note: The unit is sold as a used machine. Function testing can be arranged upon request.