Used Mineral Water for sale (7,622)

Condition: new, functionality: fully functional, Waters 2420 ELSD Low Flow Nebulizer. Chodpfx Aeua Iabed Iec 2 for sale. 1 piece/590 EUR. Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. Codoua Tbwopfx Ad Ishc SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a state-of-the-art CNC-controlled waterjet center consisting of 2 machines Machine 1: Robot with processing cell and integrated SERVO turning table. Machine 2: Robot with 2 processing cells and 2 integrated SERVO turning tables. This waterjet center is ideal for companies looking for a flexible and efficient solution for demanding cutting tasks. They are characterized by high precision, flexibility and reliability. - Robot arm NJ-16-3.1 Foundry: The robot has a load capacity of 16 kg and a working radius of 3100 mm. It is particularly robust and flexible, equipped with an IP65 protection class and is flange-mounted directly behind the cell. - SERVO turning table: With a maximum load of 500 kg and a faceplate center width of 2800 mm, the interpolating turning table offers maximum precision and repeatability. Chjdpsua U Tzofx Ad Ijc - Processing cell: The processing cell measures 2350 x 4500 mm and is equipped with sound insulation. - High-speed roller shutter: Integrated into the cell wall, the high-speed roller shutter ensures safe access and complies with Machinery Directive 2006/42/EC. - SL-VI 30 Plus high-pressure pump: This pump achieves a pressure of up to 4136 bar, ideal for precise cutting processes. - Water cutting head: The water cutting head is a central component of the system and offers maximum precision. It is equipped with a high-pressure line feed, a manual change system for quick replacement. Additional features: - CNC control: Siemens 840D controller with integrated PROFINET for controlling the robot and integrated S7 319 safety technology. - Cyclone separator: Efficient system for particle separation - Programming options: The robot is programmed using simulation software, machining takes place in the CAM system and the programs are transferred via G-code. Main features Rotary table cells: - Robot arm NJ-16-3.1 Foundry: This robot has a load capacity of 16 kg and a working radius of 3100 mm. With an IP65 protection class, it offers a high level of robustness and flexibility. - SERVO rotary tables: The system is equipped with two SERVO rotary tables, each with a load capacity of 500 kg. These rotary tables enable precise machining of large workpieces with a maximum component size of 1000 x 1000 x 1000 mm. The repeat accuracy is ±0.15 mm with a rotation of 180° in just 5 seconds. - Machining cell: The machining cells each have a size of 2350 x 4250 mm. - 2 high-speed roller shutters: Integrated into the front wall of each cell, the cold-resistant and antistatic high-speed roller doors ensure safe access to the processing cell. The waterjet center offers outstanding processing flexibility and is suitable for various industrial PUR waterjet applications. Price on request or guide price < €300,000 Contact: For more information or to arrange a viewing appointment, please contact us on the telephone number provided.

Condition: as good as new (ex-display), Year of construction: 2023, Briefly stated: Base axis (X): 1.3-2 mm Outrigger (Y): 1.3-4 mm Accuracy: 0.06 mm Technical data Linear axis accuracy: ± 0.1 mm/m Maximum travel speed: 10 m/min Acceleration: 0.02 g Repeatability: ± 0.06 mm Circular accuracy: ± 0.1 mm Z-axis stroke: 180 mm Base axis (X): 1.3 m, 3 m, 4 m Outrigger (Y): 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce1 drilling guide Splash guard1 FlowTexturing (FTT) Csdohw Nfqspfx Ad Ishc Abrasive slurry system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Deionized water conversion kit * Required for FlowTexturing

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. Chjdpfjq Ngafox Ad Isc The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Condition: new, power: 110 kW (149.56 HP), Year of construction: 2025, Bauxite Crusher: Bauxite is an aluminum ore, and crushers or mills are used to break down the bauxite into smaller pieces for further processing. Jaw crushers, impact crushers, or cone crushers may be used for this purpose. Granite Crusher: Granite is a hard and durable natural stone. Crushers used for granite crushing typically include jaw crushers, impact crushers, and cone crushers. These crushers can handle the varying hardness of granite and produce different sizes of crushed products. Bentonite Crusher: Bentonite is a type of clay with excellent water-absorbing and plasticity properties. Crushers such as jaw crushers or cone crushers are used to break down the bentonite into a manageable size for further processing. Barite Crusher: Barite, also known as baryte, is a mineral consisting of barium sulfate. Crushers like jaw crushers and cone crushers are commonly used in the crushing process of barite. Impact crushers may also be used for shaping and processing finer particles. For each of these minerals, the selection of the appropriate crusher depends on factors such as the hardness of the material, the required final product size, and the specific characteristics of the deposit. It's also important to consider whether a primary crusher, secondary crusher, or even tertiary crusher is needed in the processing flow. Additionally, for certain applications, grinding mills may be employed after the initial crushing stage to further reduce the size of the particles. Grinding mills suitable for these minerals might include ball mills, Raymond mills, or vertical roller mills, depending on the specific requirements of the process. Chsdpfx Aoq Nx Apsd Isc Remember that the choice of crushers and mills is often part of a larger mineral processing plant design, and the selection process should take into account the overall production requirements, mineral characteristics, and economic considerations.

Condition: used, power: 100 kW (135.96 HP), Year of construction: 2023, operating hours: 219 h, maximum speed: 40 km/h, Operating hours: 219, First registration: 16.01.2024 _____ Max. load capacity: 4,200 kg Max. lift height: 7,000 mm Max. outreach: 3,800 mm Length to attachment carrier: 4,730 mm Width: 2,310 mm Height: 2,530 mm / 2,590 mm (with CS activated) Total weight with forks: 8,170 kg Total weight without forks: 8,000 kg Engine: 4-cylinder Perkins 904J 3.6 l displacement, water-cooled Output: 100 kW (136 HP) 2,300 rpm Hydraulic reversing fan Emission Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement EPD PLUS incl., with optional automatic rpm increase Mineral-based hydraulic oil HVI 46 Transmission: 2 speeds, electrohydraulically controlled Vmax = 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: closed cab, split door, 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 electronic joystick with capacitive enable incl. direction selector switch CS = hydropneumatic cab suspension Telescopic boom: 2-section with electronic end-position dampening (Soft Stop) Quick-attach device carrier Type "ZM2" hydraulically controlled from cab Steering: hydraulic steering, 3 steering modes: all-wheel, front-wheel, crab steer Permanent all-wheel drive Axles: fixed front axle, oscillating rear axle Brake system: servo-assisted disc brakes on all four drive shafts, automatic parking brake when engine is off Frame: high-strength steel design Hydraulic system: variable displacement pump "LOAD SENSING" Working hydraulics flow: 151 l/min Hydraulic fan flow: 46 l/min Total flow rate: 197 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12 V, 100 Ah battery, 120 A alternator Stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement detection, and overload shutoff Tires: 460/70 R 24 Standard equipment: servo brake, hydraulic oil cooler, rear mounting plate for tow bar, hydraulic reversing fan, radio prep, work lights on cab (2 front, 2 rear), preinstalled function for auxiliary hydraulics at boom head, 2 hydraulic connections at boom head, load protection guard on attachment carrier, road lighting, automatic main battery disconnect, electrical cable in boom, acoustic reverse signal, lift cylinder support for safety Special equipment: EU homologation as tractor/ towing vehicle 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connector Air conditioning Boom suspension (B.S.S.) LED work lights on cab (2 front, 2 rear) 2 work lights at the end of the first boom section (base boom) ASCS upgrade: monitor with all ASCS functions + thumb... Cjdpfxepcht Ho Ad Ishc

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar to, but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water at approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in versions with 250 and 350 bar) and a chemical-free weed control function with approx. 99°C. The following models are available: - Torpedo Compact 23/250 | 23 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min. at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer - Pressure regulator - Safety valve Cedpfsdqkrwex Ad Ishc - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Further accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotating nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 240202088, total width: 1,300 mm, total length: 700 mm, total height: 2,550 mm, overall weight: 350 kg, water tank capacity: 120 l, noise level: 70 dB, input voltage: 400 V, water pressure: 200 bar, pump capacity: 14 l/min, working width: 1,100 mm, Equipment: type plate available, High-pressure washing booth (new installation), working area 1100mm x 650mm. Temperature range adjustable from 0-45°C. Chodjzlp Ifopfx Ad Ioc The system features a chip screen and filter. In the washing area, the system is equipped with a high-pressure lance and an air blow gun. Stainless steel AISI304, steam extraction, water level sensor.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit TM-102-K: Automatic Sheet Seperator with Quadruple Round Knife Seperating Unit: Quadruple Round Knife, Perforating Device Chsdszvn Hzjpfx Ad Ijc Jogging Table (Delivery)

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 7,500 kg, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE A dewatering screen is a vibrating screen used in industries such as mining, sand and gravel, and construction to remove moisture from a mud mixture. By separating the solid particles from the water, dewatering screens provide an efficient way to process materials while reducing water usage and improving the quality of the final product. • Model: FABO DSHC-1635 Type - Dewatering Screen - Capacity: 80-120 T/H - Size: 1650 x 3500mm - Screen Decks: 1 Deck 0.250 micron Polyurethane Screen Chodpfxozvxmlo Ad Iec - Screen Surface: 5.60 m2 - Screen Power/Spin: 2 x 7.5 kW 1000 rpm Vibro Motor - Screen Inclination angle: 8° - Stroke: 6-9 mm - Screen Side Sheet: ERD A1 Quality 12mm - Discharging pipe: 219 x 10 mm installation tube - Weight: 7500 kg FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2009, Overview This SMI SK 450 T is a shrink packer for PET bottles, built in 2009 by SMI (Italy). It collates bottles into pack formations, wraps them in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 45 packs per minute. It handles 0.5 l bottles in 3x3, 0.75 l bottles in 2x3 and 1.5 l bottles in 2x3 formats. The wrapping section is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the shrink packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Contrary to the pictures and videos, please note that the tray forming unit is no longer available. This unit has been removed and is no longer installed in the machine/line. Technical data - Manufacturer: SMI (Italy) - Model: SK 450 T - Year of manufacture: 2009 - Machine type: shrink packer for PET bottles with integrated heating tunnel - Output: up to 45 packs/minute - Pack formats: 0.5 l (3x3), 0.75 l (2x3), 1.5 l (2x3) - Location: Germany Equipment - Integrated shrink tunnel (heating oven) - Film wrapping unit with film roll holders - Machine-mounted touchscreen control panel - Full safety enclosure with viewing windows Condition The machine is well maintained and has received extensive annual overhauls by the manufacturer. It is still installed and under power and remains in regular production, so it can be inspected in operation on site. Availability Chsdpfx Aezuc Nzjd Ioc The machine remains in production until 30 September 2026. Dismantling and loading onto the buyer's trucks will take place between 7 and 10 October 2026 and can be carried out by the seller. The machine is located in Germany.

Condition: used, Year of construction: 2005, Filling machine for the production of mineral water or carbonated beverages in PET bottles. Manufacturer: LINNEA-ZEVOS Chotebor Model: AQUAFILL 40/60/12 Capacity: 9,000 bottles per hour (1.5 L and 0.5 L) Cjdpfx Adjzwpbpj Ishc Year of manufacture: 2005 Includes accessories for 1.5 L and 0.5 L bottles. Caps: PCO 1881 Used machine, in good working order, regularly serviced.

Condition: refurbished (used), 50 m³ / 50,000 l fire water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Csdpfxohh Spro Ad Iehc Weight: approx. 8,000 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked and driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blind cover, gasket and screws. Available new or used, immediately! The container has been emptied, cleaned, completely overhauled and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire hose coupling / fixed coupling A according to DIN 14319 in form B, without a level gauge connection - Vent flange stub in DN 100 with cap, with a total length of approx. 1,300 mm, suitable for 800 mm of ground cover and 500 mm above ground - Externally coated with bitumen for protection - If required, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will immediately receive the exact freight costs. Inspection is possible at any time by prior appointment. We can also offer trade-in and purchase of tanks/containers of all types. Please contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: refurbished (used), 80 m³ / 80,000 liter fire water tank according to DIN 14230 Tank volume: 80,000 liters / 80 m³ Length: approx. 12,780 mm Diameter: approx. 2,900 mm Weight: approx. 13,250 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked and driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blank cover, seal, and screws. New or used, immediately available! Chedpfohh Sr Uox Ad Ijc The container has been emptied, cleaned, completely overhauled, and inspected for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in the form B design without a gauging port - Vent flange stub in DN 100 with cap, with a total length of approx. 1,300 mm, suitable for 800 mm ground cover and 500 mm above ground - Externally coated with bitumen for protection - Upon request, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. Inspection is possible at any time by prior appointment. If you require further information, please call us or send us an email to b.barth(at)barth-tank.de We can also offer trade-in and purchase options for tanks/containers of all kinds; please do not hesitate to contact us. We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: refurbished (used), 150 m³ / 150,000 l fire water tank according to DIN 14230 Tank volume: 150,000 liters / 150 m³ Length: approx. 22,500 mm Diameter: approx. 3,000 mm Weight: approx. 32,000 kg Material: Steel grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked on and driven over (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blank cover, seal, and screws. Available new or used, ready for immediate delivery! The container has been emptied, cleaned, fully overhauled, and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire hose coupling / fixed coupling A according to DIN 14319 in design B without a level indicator. - Vent flange stub with a cap, total length approx. 1,300 mm, suitable for 800 mm of soil cover and 500 mm above ground. - Externally coated with bitumen for protection. - Upon request, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion). - It is also possible to line the container with a plastic inner liner. Chedpfx Aohh St Ijd Ioc A cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will receive the exact freight costs immediately. An inspection is possible at any time after prior appointment. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de. We can also accept and purchase tanks/containers of all types; please contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 40,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 40,000 liters / 40 m³ Length: approx. 8,720 mm Diameter: approx. 2,500 mm Weight approx. 6,600 kg Material: steel material S 235 JRG 2 Csdevmz Idjpfx Ad Ijhc The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: used, Field of application: Mining Chsdpfx Adex Dh S To Iec Experience unparalleled efficiency with Polygonmach's Mobile Dewatering Screen and Hydrocyclone, part of our revolutionary range of mobile crushing and screening plants on wheels. Polygonmach, an industry-leading brand, is committed to redefining the standards of construction and mining industries with its cutting-edge technologies. The Polygonmach Mobile Dewatering Screen and Hydrocyclone is an exceptional solution that offers high-efficiency classification and separation of materials, a must-have for operations dealing with a variety of mineral ores, aggregates, and recyclables. This mobile system is crafted to effectively dewater and separate fines, providing a consistent, saleable product. The dewatering screen works by removing the water from your washed sand and other materials, while the hydrocyclone ensures precise and efficient classification and separation. Our hydrocyclone technology ensures precise and rapid grading. Its centrifugal motion enables it to separate heavier particles, improving product purity. This is paired with our dewatering screen that offers high-frequency vibration, ensuring effective dewatering for a dry, high-quality end product. As part of our ethos to deliver user-friendly solutions, the Mobile Dewatering Screen and Hydrocyclone system is designed for easy operation and maintenance. It comes with hydraulic legs for convenient positioning and a robust design capable of withstanding challenging working conditions. What sets the Polygonmach mobile system apart is its ability to deliver high throughput and efficiency while ensuring the quality of the final product. Applications: construction Type: centrifugal, mobile Material: for bulk materials Other characteristics: high-frequency, dewatering, high throughput net weight: Min.: 6,100 kg(13,448 lb)Max.: 10,200 kg(22,487 lb) engine power: Min.: 3.6 kW(4.89 hp)Max.: 9 kW(12.24 hp)

Condition: ready for operation (used), Year of construction: 1987, Recooling capacity at water flow temperature of 15/10°C: 2.3/2.1 kW Volume flow: 0.5 m³/h Chedjr Ezdrepfx Ad Ioc electrical Connection: 380 V, 1 kW Space requirement: 900 x 600 x 1020 mm Weight: 160kg Water connections reduced to 1/2".

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module Chodpfxovvl Ugj Ad Ijc • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, warranty duration: 24 months, power: 30 kW (40.79 HP), OMAX MAXIEM 2040 3D, 30 kW MAXIEM Pump and A-JET Tilting Cutting Head Factory-refurbished with manufacturer certification and a two-year warranty. The waterjet cutting system configuration is freely selectable. Feel free to contact us and let us know your desired configuration. Customers searching for efficient and cost-effective waterjet cutting systems will find their ideal solution in the Modular Line MAXIEM. These powerful MAXIEM systems combine operational flexibility and affordability, and can be expanded with a broad range of accessories to suit your specific cutting needs. With the modular MAXIEM line, OMAX delivers advanced, reliable waterjet cutting technology at an economical entry price, thereby opening up the advantages of this technology to a wide array of application areas. Leasing with highly attractive terms is available on request, for example, for up to 86 months. - Accuracy up to ±0.05 mm - Software and machine components based on the latest OMAX standards With the 3D A-JET cutting head, the MAXIEM achieves cutting precision of under 0.1 mm. The 3D head enables bevel cuts up to 60° and compensates for cutting angle errors. The machine is currently being factory-refurbished; the images are thus similar to the actual offering. Prompt delivery can be arranged with INNOMAX AG. Cjdpfx Ajrm Ilfed Ishc

Condition: used, Year of construction: 2021, - Number of chambers: 3 - Volume per chamber: 90 m3 - Chamber size: 9.6x7.3x4.1 m - Final moisture content: 10 +/- 2% Drying chamber Manufacturer: BigonDry Type: Mod.LEM96.73.41 Year of manufacture: 2021 Technical data - Number of chambers: 3 - Volume per chamber: 90 m3 - Chamber size: 9.6x7.3x4.1 m - Overall chamber dimensions: 10.2x7.5x5.4 m - Type of hardwood - Final moisture content: 10 +/- 2% - Drying package: 4.5x1.2x1.2 m - Substructure: Aluminum - Wall insulation: Aluminum cassettes plus 100 mm glass wool - Sliding door: Aluminum plus 100 mm mineral wool - Front unloading - Ventilation: 900 mm - Ventilation power: 3 kW - Nominal air volume: 36000 m3/h - Hot water temperature: 90-95 C - Heating capacity: 380000-190000 kcal/h - Roof fans: 2+2 Codpszu Amasfx Ad Iehc - Spray water pressure: 80 bar - Intermediate ceiling: Aluminum - Inspection doors - Wind resistance: 110 km/h - Snow load: 200 kg/m2 - Control system: Fully automatic control unit VENUS 2500-24F-PRO - Noise level: 68-70 dBA - Digital sensors - Total power: 18.5 kW - Power supply: 400v/50Hz Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 1,760 h, functionality: fully functional, For sale: professional abrasive waterjet cutting machine MAXIEM 1530 by OMAX Corporation. Fully operational, ready to work. Technical specifications: - Work envelope X-Y: 3,100 × 1,575 mm - Pump: OMAX P2050V Direct Drive 30 HP (22 kW), up to 50,000 PSI (3,450 bar) - Control: IntelliMAX Basic with CAD/CAM - Drive: closed-loop, hardened precision ground shafts, linear encoder - Traverse speed: up to 20 m/min - Accuracy: ±0.13 mm Cjdpfxoy Hgrme Ad Ishc - Z-axis: motorized Included accessories: - Terrain Follower, Optic Locator - 200 L abrasive delivery system - Basic tool box kit - Tool cabinet

Condition: used, Year of construction: 2007, operating hours: 15,000 h, functionality: fully functional, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, table length: 4,500 mm, table width: 2,000 mm, tank capacity: 8,000 l, pressure: 4,150 bar, operating pressure: 3,800 bar, input current: 84 A, power: 45 kW (61.18 HP), Waterjet cutting system CMS Tecnocut IDRA (predecessor to the Idroline series) 2 x 5-axis cutting heads (only 1 head is fully operational / head 2 is functional but lacks high-pressure/sand feed) Cutting head configuration as a 2D head with a 250 mm Z-axis travel range Cutting head configuration as a 3D head with a 150 mm Z-axis travel range, A-axis travel range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control, not 2.5D like many other machines Cutting area: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 250 / 150 mm A-axis: +/- 274 degrees B-axis: +/- 62 degrees Details: - 5-axis cutting head with IKC technology (intelligent cutting head control for angle error compensation) - Anti-collision/height sensor for surface scanning - DDX EasyStone Premium software - 60 HP/45 kW Jetpower EVO pump (3-cylinder) with an output of up to 5 L/min / Maximum pressure 4150 bar / Normal operating pressure 3800 bar The machine is still in operation and connected to power until July 31, 2026. Codjzbz Evjpfx Ad Ijhc

Condition: excellent (used), operating hours: 4,500 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, table length: 3,656 mm, table width: 1,956 mm, High-Performance 5-Axis Waterjet Cutting Machine Well-maintained OMAX 60120 CNC Waterjet Cutting System equipped with a 30 kW (40 HP) EnduroMAX 4060 high-pressure pump. The pump has only 4,500 operating hours, making this machine an excellent choice for companies seeking a reliable and productive waterjet system with significant remaining service life. This machine is equipped with the OMAX A-JET 5-axis cutting head, enabling bevel cutting and complex 3D machining. The A-JET head offers a tilting angle from 0° to 59°, providing exceptional flexibility for chamfers, weld preparation, and advanced contour cutting. The machine features the integrated OMAX CAD/CAM control system, allowing direct import and processing of DXF files for fast and efficient production. Technical Specifications * X / Y / Z Travel: 3,000 × 1,500 × 200 mm * Working Area: 3,000 × 1,400 × 150 mm * Table Size: 3,656 × 1,956 mm * Maximum Workpiece Load: 2,000 kg/m² * Machine Dimensions: 5,715 × 2,794 mm * Machine Height: 2,921 mm * Machine Weight (table only): 2,818 kg * Operating Weight (including water): 10,545 kg * Water Tank Capacity: 7,727 liters Control System * Integrated OMAX CAD/CAM software, Intelli-MAX® Premium Chsdezi Hhqspfx Ad Ioc * Direct DXF file compatibility * Industrial PC controller Electrical Specifications * Power Supply: 400 VAC, 50 Hz, 3-phase * Fuse Protection: 80 A High-Pressure Pump * Model: EnduroMAX 4060 * Pump Power: 30 kW (40 HP) * Operating Hours: Only 4,500 hours * Maximum Pressure: 4,100 bar * Flow Rate: 1.5-3.6 l/min * Pump Dimensions: 915 × 1,676 × 978 mm * Pre-filter: 0.2 micron * Integrated Water Pre-Booster: 6.7 bar Included Equipment * OMAX A-JET 5-axis cutting head (0°-59° tilt) * Abrasive hopper / abrasive feed system * Water treatment system * Sludge removal system Highlights * Premium OMAX 5-axis CNC waterjet cutting system * A-JET bevel cutting head with 0°-59° tilt * EnduroMAX 4060 pump with only 4,500 operating hours * Abrasive feed system included * Water treatment system included * Sludge removal system included * Integrated CAD/CAM software with direct DXF import * Large cutting area suitable for a wide range of materials * Robust industrial construction * Ready for immediate operation This is a fully equipped, high-specification OMAX waterjet system offering precision, flexibility, and low operating hours. An excellent opportunity for manufacturers looking for a premium CNC waterjet solution that is ready to go straight into production.