Used Water Car 10000 L for sale (68,575)

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: Pgsdoxk T Efjpfx Agxep • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: good (used), Year of construction: 2007, operating hours: 9,953 h, functionality: fully functional, total width: 2,440 mm, total length: 7,150 mm, total height: 2,590 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 12,500 kg, rotational speed (max.): 1,700 rpm, water tank capacity: 1,600 l, empty load weight: 12,500 kg, power: 480 kW (652.62 HP), water pressure: 1,000 bar, cubic capacity: 15,874 cm³, pump capacity: 193 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit Hammelmann HDP 362 in a BDF / WAB container. Similar, but not Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 362 PRESSURE STAGE 1: Operating pressure: 1000 bar Flow rate: 193 l/min Switching valve for 4 consumers, each with separately adjustable pressure. Drive speed: 1700 rpm Plunger: d50 mm Drive power: 360 kW Pgodpfx Agewz Ekqoxsp With 480 kW Deutz TCD 2015 V08 4V Stage 3 diesel engine With workshop and changing room. Dimensions LxWxH: approx. 7150x2440x2590 mm Weight: approx. 12,000 kg Year of manufacture: 2007 Operating hours: 9953 h (machine hours) Condition: The high-pressure pump is in good used condition.

Condition: refurbished (used), Year of construction: 2003, operating hours: 7,951 h, functionality: fully functional, total width: 2,450 mm, total length: 7,600 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 9,000 kg, rotational speed (max.): 2,100 rpm, empty load weight: 9,000 kg, year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 205 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit, Hammelmann HDP 402, housed in a WAB container. Similar to, but not a Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 402 PRESSURE STAGE 1: Operating pressure: 880 bar Flow rate: 242 l/min PRESSURE STAGE 2: Operating pressure: 1000 bar Flow rate: 205 l/min Drive speed: 2100 rpm Plunger: d50 mm Drive power: 400 kW Podoipadxepfx Agxogp with a 442 kW Caterpillar C-15 2CPXL14.6ESK diesel engine with workshop and changing room. Dimensions L x W x H: approx. 7600 x 2450 mm Weight: approx. 9000 kg Year of manufacture: 2003 Operating hours: 7951 Condition: The high-pressure pump has been fitted with new valves. New batteries. In good used condition.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 5 h, - High-pressure cleaner PTC Torpedo Eco Compact 16/200, similar to but not a Dynajet, Oertzen, Falch, DIBO, etc. - Cold water / hot water approx. 95°C, steam 32 bar up to 140°C, and chemical-free weed control function with approx. 99°C. TECHNICAL DATA: - Torpedo Eco Compact 16/200 | 16 l/min at 200 bar | Diesel engine: Yanmar L100N 8.5 kW - Dimensions and unladen weight with 500 l water tank: 2000x1050x1100mm, approx. 350 kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer - Pressure regulator - Safety valve - High-quality frame made of painted steel, forklift adapter possible Pedjfdkcgepfx Agxsgp - Covers made of stainless steel - Magnetic descaling device - Incl. frame for water tank, water tank 500 l - Incl. basic accessories such as 20 m high-pressure hose, spray gun, lance and flat jet nozzle 25° - Optional accessories such as water-sandblasting kit, surface cleaner, rotary nozzle, weed control lance and trolley available upon request.

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. Pgsdpezmap Nefx Agxop More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total width: 1,900 mm, total length: 3,720 mm, total height: 1,990 mm, pressure: 500 bar, operating pressure: 500 bar, fuel: diesel, overall weight: 1,800 kg, rotational speed (max.): 2,100 rpm, high-pressure hose length: 50,000 mm, water tank capacity: 300 l, empty load weight: 1,800 kg, temperature: 95 °C, fuel tank capacity: 100 l, type of cooling: water, hose length: 25,000 mm, power: 45 kW (61.18 HP), water pressure: 500 bar, pump capacity: 40 l/min, Equipment: type plate available, The HDT60, in its hot water trailer version, covers a pressure range of 400 to 500 bar with a flow rate of 33 to 40 l/min. The pump is driven by a water-cooled 4-cylinder turbo diesel engine. To ensure longevity and corrosion resistance, the frame inside the trailer, which is made of hot-dip galvanized steel, is one of the features. Additionally, the frame is primed and then painted, which creates a very attractive appearance. The frame can be easily pulled out for maintenance. The CD60, in its trailer version, can be configured with numerous options, such as a hot water boiler, an electrically operated hose reel, a remote control, etc. However, it is not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate HDT60-400 400 bar 40 lpm HDT60-500 500 bar 33 lpm General specifications: ----- Drive engine: Kioti turbo diesel 4-cylinder, water-cooled, Stage V (Tier 0 without AdBlue available on request) Power of drive engine: 45 kW Speed of drive engine: 2100 rpm Fuel tank: 100 L Max. fuel consumption: 6.8 L/h Water tank: 300 L Burner output: 2x 105 kW Max. water temperature: 95°C Dimensions and dry weight: 3720 x 1900 x 1990 mm (1,800 kg) Pgodpfxshgbkuj Agxjp • Automatic pressure detection for easy start-up and operation. • Automatic idling for higher fuel savings. • Overpressure detection for increased safety and pump protection. Standard accessories included in the scope of supply of each machine: • 50 m high-pressure hose & 25 m low-pressure hose • HD gun with shut-off valve • Double lance with side handle • Nozzle holder with nozzle(s) • Telematics for remote monitoring. Remote monitoring via telematics. Optional accessories: • High-pressure hoses in special lengths • Special hose connections • Pneumatically operated pressure relief valve "Tumble Box". • Selection of various spray guns: manual, electric and hydraulic. • Surface cleaner • Spare parts kits • Wireless control and diagnostics with hand-held transmitter • Ethernet API for control and diagnostics. Alternatively available as a skid or/and cold water version.

Condition: reconditioned (used), modernized machine with new LTG control system StoreControl L External dimensions: Pgjdpervkrfsfx Agxep Overall height 10,000 mm Overall width 1,600 mm Overall depth 2,680 mm 45/90 carriers, each with a payload of 250 kg in the clear internal dimensions: W = 1,250 mm D = 825 mm H from 0 to 750 mm Total payload up to 20,000 kg Start of the operating opening at 865 mm above the floor level, then 850 mm high Color scheme: GRAY / BLUE, carriers hot-dip galvanized Surfaces cleaned, signs of wear and minor deformations possible Performance data Vertical drive 1 x 2.2 kW / 400 Volt Horizontal drive 1 x 0.29 kW / 400 Volt Additional extras: Lift door, manual Subject to errors, technical changes, and minor deviations in the photos Images of a similar machine Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: used, Year of construction: 1988, Manufacture : Goavec SA Year : 1988 Previous application: Cream tank (fluid/thick) Volume : 10000 Litres Material : 304 stainless steel (Thickness : 25/10) Insulation : yes Tank pressure : atmospheric Agitation : 2.4 KW - 32 rpm 1 fixed paddle: counter-stirring Washing balls: 3 units Inspection hatch: manhole Pgedpfex R Dkzox Agxsp Removable guardrail Drawing available (digital version)

Condition: used, Year of construction: 1988, Manufacture : Goavec SA Year : 1988 Previous application: Cream tank (fluid/thick) Volume : 10000 Litres Material : 304 stainless steel (Thickness : 25/10) Insulation : yes Tank pressure : atmospheric Pjdpfjx R Dknsx Agxsgp Agitation : 2.4 KW - 32 rpm 1 fixed paddle: counter-stirring Washing balls: 3 units Inspection hatch: manhole Removable guardrail Drawing available (digital version)

Condition: used, Year of construction: 1990, GVW: 12.000 kg Please contact Emal Jaweed for more information Pgjdsy Ivy Nspfx Agxsp = Additional options and accessories = - Front leaf spring suspension - Rear leaf spring suspension

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, - High-pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam – similar, but not a Dynajet, Oertzen, Falch, etc. - Cold water / hot water / steam 32 bar up to 140°C / high-pressure steam 150 or 200 bar up to 150°C for cleaning and disinfecting. The following models are available: - TORPEDO MINI-E 3.8 M 230 Volt/50 Hz Powersteam, 8 l/min at 150 bar Pedpfefh Skaox Agxsgp - TORPEDO MINI-E 5.8 T 400 Volt/50 Hz Powersteam, 8 l/min at 200 bar - Dimensions and empty weight: 110x64x98 cm, approx. 150 kg - Includes 10 m high-pressure hose, spray gun, lance, and flat spray nozzle 25°.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar to, but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water at approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in versions with 250 and 350 bar) and a chemical-free weed control function with approx. 99°C. The following models are available: - Torpedo Compact 23/250 | 23 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min. at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer - Pressure regulator - Safety valve - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° Pgjdpfxodqkrwo Agxep - Further accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotating nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Condition: good (used), - Material: DIN 1.4404 / AISI 316L - Surface : 3D (BA) Dimensions: - Width: 1475 mm - Depth: 2750 mm - Height: 3700 mm Pjdpfjv Hxi Sox Agxegp - Ground clearance: 500 mm Design: - Rectangular manhole 310 x 420 mm - Residual drain butterfly valve DN 40, Friedrich no. 2 - Clear drain Angled seat free-flow valve DN 40, Friedrich no. 2 - Clear drain butterfly valve and swivel elbow DN 40, Friedrich no. 2 - Level indicator - Cooling plate - Handwheel taster - Dome NW 400 mm with swivelling cover

Condition: like new (used), Volume 22 liters Good working condition. Please check out our other listings as well. Pjdjhwtv Sopfx Agxegp

Condition: used, Set of machines for the production of beverages in 5-liter PET bottles. 1) RIVI 24 carousel filling machine - machine modernized in 2013 - previously used for 1.5 L bottles (24 fillers) - number of filling heads: 12 pcs (for 5 L bottles) - capacity: approx. 1800 bph 5 L 2) ZALKIN 4 PET bottle capper - number of closing heads: 4 pcs - capacity: approx. 2000 bph Used machines, functional at the time of dismantling. Pgjdpou I N Npefx Agxjp Complete original technical documentation. Other offers also include semi-automatic blow molding machines for 5 L PET bottles, compressors and bottle labelers. .

Condition: used, maximum load weight: 30,229 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2019, Provision of a German ATP-IR certificate including foil sticker and ATP type plate Body HACCP-certified including certificate and sticker Customs sealing device with approval and assurance Bolted underrun protection according to Directive 70/221/EEC Color: White FERROPLAST body in reinforced version, suitable for intensive refrigeration operation All three axles with lift function and traction support (3x brakes) Special version of the landing gear console for 3-axle tractor units Pallet box for 36 Euro/ISO pallets Dynamic Ramp Protection (DRP) Additional pair of plastic mudguards between the axles TrailerConnect service package 'Temperature' (12 months included) Lighting system with 2 LED combination lights + SL2 safety lights 4 temperature sensors for temperature recording Right-side fuel filler neck + biodiesel-compatible fuel tank Level indicator -40°C to +40°C, accuracy class 2 according to DIN 16203 Rear floor plate with 1,000 mm stop inside Refrigeration unit: Carrier 1950 MT Podpfx Agszp Tgyoxsgp

Condition: used, axle configuration: 3 axles, first registration: 10/2020, Equipment: ABS, 3-axle semi-trailer, flatbed/curtainsider, Manufacturer: Schmitz SCS 24, first registration: 10/2020, Lift axle, side doors, Edscha cover, pallet box, aluminum rims, lift axle, disc brakes, spare wheel, Pgjdpfx Ageznrbgoxep Tires: 385/65R 22.5 Price: €13,500.00 plus VAT (19%) Errors and prior sale excepted.

Condition: new, maximum load weight: 29,071 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Farikneuer Schmitz SCS 24/L Speed Curtain Expected to be available end of February * Load securing: body certified according to EN 12642 XL * with beverage certificate * with Daimler 9.5 certificate * Spare wheel holder basket version for 2 wheels * Wheelbase 7,700 mm Pgodpfxevw Hkre Agxep * 1st axle liftable * Schmitz axles with air suspension and disk brakes * Lifting and lowering device * Jost landing gear * LED reversing lights * 6 tires 385/65R22.5 * 30 pairs of lashing eyes in the outer frame * Plastic tool box * Pallet box * 28 mm plate floor * Fire galvanized chassis * Tarpaulin color RAL 9010 pure white Example pictures For further information please do not hesitate to contact us

Condition: used, maximum load weight: 12,070 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/2014, next inspection (TÜV): 06/2026, total width: 2,600 mm, total height: 3,880 mm, Equipment: ABS, * Carrier Vector 1350 cooling unit * Telematics system * Data logger with printing unit * Variable partition * Sliding doors Pgodpfx Aoy E Ep Uogxjp * Rear impact protection ----* Schmitz axles * Air suspension system * Wabco Trailer EBS-E * Aluminum rims * Storage compartments ----* Unit operating hours: 1879 hours * Tire size: 385/65R22.5 * Technically permissible total weight: 18,000 kg * Tare weight: 5,930 kg * Overall length: 9,150 mm * Vehicle inspection (TÜV) / emissions test: expired ----Vehicle number: 12034----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. -----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/emissions test, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services. -----Your VTS Team

Condition: used, maximum load weight: 31,475 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2021, Year of construction: 2021, 1st axle liftable, dimensions (LxWxH): 13,625 mm x 2,480 mm x 2,700 mm, Rotos SCB 9t, Jost support leg, LED side marker lights linked with indicators, Delta rear cross underrun bar, 13 pairs of lashing rings on the outer frame (2,000 kg per ring), EN 12640, 2x load securing rails at 800 mm and 1,500 mm, hot-dip galvanized chassis, RAL 9010 Pedsyu Euzspfx Agxjgp

Condition: used, maximum load weight: 27,247 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2018, next inspection (TÜV): 07/2027, loading space length: 13,410 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, Year of construction: 2018, Equipment: ABS, SCHMITZ-Cargobull, type SKO 24/L – 13.4 FP 60 COOL, 3-axle cryogenic box semi-trailer with a double-deck loading system and 22 pieces of height-adjustable aluminum support beams, 1 row of cargo securing rails embedded in the side walls as a perforated strip, 4 pairs of Ferrylashings according to DIN/ISO 9367 for SKO COOL, with support block rests, certificate for cargo securing according to DIN EN 12642 Code XL, loading dimensions approximately 13410 x 2460 x 2650 mm, Thermo-King SLXi 300 - 50 refrigeration unit (diesel and electric operation) with automatic start/stop function, Thermo-King Touchprint temperature recorder model with printer, internal circulation bulkhead approximately 1950 mm high, baseboard protection strip approximately 300 mm high, multi-functional floor, ROTOS - SCB axles 3x 9000 kg air-suspended with lifting and lowering device, lift odometer – analog (axle odometer), center right, ABS, disc brakes with EBS, 1 rubber bumper strip at the rear, transverse, and 2 rubber bumper pads perpendicular to the lamp panel, 2 rubber corner bumper pads at the rear, good tires 385/65 R 22.5, large pallet box for 36 Euro pallets, technically possible total weight of 42,000 kg, FRC valid until 02/2028, 1st owner, good and well-maintained overall condition!, ORIGINAL mileage 151,120 (verifiable), German vehicle with German registration documents! Sale only to commercial businesses! All information without guarantee! Errors and prior sale reserved! Pgodszpcpqjpfx Agxsp

Condition: used, maximum load weight: 27,247 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2018, next inspection (TÜV): 07/2027, loading space length: 13,410 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, Year of construction: 2018, Equipment: ABS, SCHMITZ-Cargobull, type SKO 24/L – 13.4 FP 60 COOL, 3-axle refrigerated box semi-trailer with a double-deck loading system and 22 pieces of height-adjustable aluminum support beams, 1 row of cargo securing rails embedded in the side walls as a perforated strip, 4 pairs of Ferrylashings according to DIN/ISO 9367 for SKO COOL, with support block mounts, certificate for cargo securing according to DIN EN 12642 Code XL, loading dimensions i.e. 13410 x 2460 x 2650 mm, Thermo-King SLXi 300 - 50 refrigeration unit (diesel and electric operation) with start/stop automatic function, Thermo-King temperature recorder, Touchprint model with printer, circulation bulkhead approximately 1950 mm high inside, baseboard wear strip approximately 300 mm high, multi-functional floor, ROTOS - SCB axles, 3 x 9000 kg, air-suspended with lifting and lowering device, lift odometer – analog (axle odometer), center right, ABS, disc brakes with EBS, 1 rubber impact strip at the rear, transverse, and 2 rubber impact buffers perpendicular to the lamp panel, 2 rubber corner impact buffers at the rear, good tires, 385/65 R 22.5, large pallet storage box for 36 Euro pallets, technically possible total weight 42,000 kg, FRC valid until 02/2028, 1st owner, good and well-maintained overall condition!, original mileage 151,120 (verifiable), German vehicle with German documents! Sale only to commercial businesses! All information without guarantee! Errors and prior sale reserved! Pedpjzpcpkofx Agxegp

Condition: good (used), functionality: fully functional, machine/vehicle number: WSM00000005321782, empty load weight: 8,866 kg, maximum load weight: 27,134 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 06/2027, loading space length: 13,300 mm, loading space width: 2,490 mm, loading space height: 2,640 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65 R 22.5, color: white, Year of construction: 2024, operating hours: 3,021 h, Equipment: ABS, cooling unit, our vehicle number #30989 Pjdpfx Agezn Nqlsxjgp 3 Schmitz axles Tire size 385/65 R 22.5 Permissible total weight 36,000 kg Payload 27,134 kg Unladen weight 8,866 kg Body dimensions (internal, L x W x H): 13,300 mm x 2,490 mm x 2,640 mm, Volume: 87 m³ Color: white Double-deck Refrigeration unit: Thermo King SLXi 300-50 Diesel operating hours: 3,007 h Total operating hours: 3,021 h Electric operating hours: 13 h Lift axle Pallet box Portal doors Disc brakes Diesel/electric cooling Multifunction floor V7 Printer TrailerConnect 3 air ducts 1 row of cargo securing rails Aluminum rims Alcoa DuraBright LED fuel gauge TrailerConnect tire pressure monitoring system Raise/lower ABS/EBS LED lighting 2 LED reversing lights Forklift accessible, load capacity 5,500 kg Simple external twist lock Cargo securing certificate EN 12642 XL Internal lighting Jost kingpin Financing available upon request!!!

Condition: used, maximum load weight: 32,880 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, Equipment: ABS, Schmitz Cargobull SPL 24/L-13.62EB Platform Trailer * Platform semi-trailer * Front wall, 1,200 mm * 12 container locking devices / twist locks: 1 x 40 ft, 2 x 20 ft and 1 x 20 ft * Continuous lashing points in the outer frame * 4 extendable warning signs with position lights Pjdot Dhfmepfx Agxjgp * Longitudinal beam height at the front: 156 mm, at the rear: 428+28 mm, Smart Generation * Premium distributor with 3 sockets: 2x7-pole DIN ISO3731+DIN ISO1185+ ISO12098 * 8 pcs. additional lashing beam pockets in the center of the 8 t floor, for lashing beam 70/70 * 8 pairs of additional lashing beam pockets with lashing beam securing in the outer frame for lashing beam 70/70 * Strength per additional lashing beam: up to 400 kg at a height of 1 meter * 1 row of lashing beam pockets 70x70 across the load securing, approx. 2600 mm in front of the front wall * Open storage box on top for additional lashing beams * Lashing points: 16 pairs, 4 tons tensile force per eye, according to EN 12640 * 28 mm plate floor, max. 8000 kg forklift axle load, strength test according to DIN EN 283 * Air suspension * Air control system * Lift axle * Disc brakes Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of § 145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and thus does not constitute guaranteed characteristics.

Condition: used, axle configuration: 3 axles, first registration: 08/2020, Equipment: ABS, 3-axle semi-trailer with flatbed and tarpaulin cover, Manufacturer: Schmitz SCS, first registered: 08/2020, Disc brakes, portal doors, Edscha convertible roof, Air suspension, spare wheel holder, tires 385/65R22.5 Price: €12,500.00 plus VAT (19%) Pjdpszkylxsfx Agxogp Errors and prior sale excepted.