Used Waterjet Head for sale (9,832)

Condition: used, Year of construction: 2018, operating hours: 6,955 h, machine/vehicle number: M542 8DC D01, repeat accuracy: 0.02 mm, working length: 4,000 mm, working width: 2,000 mm, Work area 4m x 2m, traverse speed 17.8 m/min, linear axis accuracy ±0.0127 mm, repeatability ±0.02 mm, Z-axis travel 305 mm, 610 mm, acceleration 0.1 g, circle accuracy ±0.0635 mm, pump pressure 3,800 bar, mobile operator station, touchscreen, LED lighting for status indication, software FlowXpert (integrated 2D/3D CAD/CAM software), pure water cutting, conventional abrasive waterjet cutting, height sensor Dynamic Contour Follower, splash guard, laser edge finder, TECHNICAL DETAILS Work area X-axis: 4,000 mm Work area Y-axis: 2,000 mm Material support area: approx. 4,100 x 2,100 mm Z-axis travel: 305 mm / 610 mm Programmable Z-axis travel: approx. 305 mm Guedj Ahgrtopfx Aatsi Traverse speed: 17.8 m/min Linear axis accuracy: ±0.0127 mm Repeatability accuracy: ±0.02 mm Acceleration: 0.1 g Circle accuracy: ±0.0635 mm Cutting speed increase through DWJ technology: up to 4x MACHINE DETAILS Waterjet system Pump pressure: 3,800 bar Cutting angle through beam compensation: 90° Table load capacity: approx. 2,441 kg/m² Operating hours: 6,955 h EQUIPMENT Mobile operator station Touchscreen LED status display FlowXpert software with integrated 2D/3D CAD/CAM function Pure water cutting system Conventional abrasive waterjet cutting system Secondary Z-axis for pure waterjet Programmable, servo-driven Z-axis Dynamic Contour Follower – automatic height sensing PASER 4 Dynamic Waterjet (DWJ) cutting head technology Automatic compensation of natural beam bending Splash guard Laser edge finder Abrasive desliming system Stainless steel beam catcher Continuously adjustable water level regulation for quiet underwater cutting Clamping and tensioning system Distributed drive system with covered ball screws Two-part steel table construction Vibration-damping separation of tank and guide system Abrasive desliming system, stainless steel beam catcher, water level regulation, clamping and tensioning system, secondary Z-axis pure waterjet, standard abrasive waterjet, programmable Z-axis, Z-axis (height adjustment): approx. 305 mm (programmable, servo-driven), water level control: fully adjustable for underwater cutting (low noise), drive: distributed drive system with covered ball screws, cutting head technology: PASER 4 Dynamic Waterjet (DWJ), compensates for natural beam bending, for precise 90° cuts at high speed (up to 4x faster), table load: high load capacity (approx. 500 kg/sq ft), table construction: two-part steel construction, separation of tank and guide system for vibration damping, material support area: approx. 4,100 mm x 2,100 mm.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 2,020 mm, travel distance Y-axis: 4,020 mm, travel distance Z-axis: 150 mm, table length: 4,346 mm, table width: 2,286 mm, Waterjet Corporation Suprema 4020 – 4,000 × 2,000 mm cutting area – available with KMT pump B&B Waterjet Abrasive offers a used Waterjet Corporation Suprema 4020 waterjet cutting machine, featuring a Mitsubishi CNC controller and ball screw drive system. The machine has recently been dismantled and is offered in its current condition, as-is, without refurbishment. Main specifications - Cutting area: 4,000 × 2,000 mm. - Z-axis travel: 150 mm. - Mitsubishi CNC controller. - Ball screw drive system. - KMT IDE cutting head with diamond orifice. - Single-stage abrasive pressure hopper included. - Prepared for a sludge removal system. - Manuals and CE documentation available. Available configurations - Machine without high-pressure pump: €45,000. - Machine with KMT 50 Classic high-pressure pump: €65,000. Optional equipment and services — not included, quoted separately - Sludge removal system. - Custom-built big bag hopper. - Air-to-oil cooling system. - IGEMS CAD/CAM software. - Installation and operator training in Italy and across Europe, quoted according to the customer’s location and requirements. Contact us for further information and to discuss the configuration best suited to your cutting requirements. Guedpfx Aasz Hynvjtoi B&B Waterjet Abrasive has been operating in the waterjet industry since 2009, supplying machines, spare parts and technical support.

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. Guedpfx Ajzlt Aysatsi The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Condition: used, Year of construction: 2018, functionality: fully functional, Description: * Due to changes in our business area and a production realignment, we are selling a waterjet cutting system STM 3020 on short notice. * Waterjet cutting system STM 3020 Year of manufacture: 2018 * Working area: X = 3002 mm, Y = 2002 mm, Z = 300 mm, table area: 3100 mm x 2100 mm Gjdpfx As Aih Twjatoui *

Year of construction: 2011, operating hours: 8,350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: WJ2010-1Z-SJ-S Smart Jet Strong, PTV Waterjet WJ2010-1Z-SJ-S Smart Jet Strong for sale For sale: PTV WJ2010-1Z-SJ-S Smart Jet Strong waterjet cutting machine. Professional CNC waterjet from PTV for the precise cutting of various materials. Thanks to waterjet cutting, materials can be processed without heat input, eliminating material deformation. This machine was used in our production process and is being offered for sale due to the termination of our business operations. Machine specifications: Brand: PTV Type: WJ2010-1Z-SJ-S Model: Smart Jet Strong CNC-controlled waterjet cutting machine Working area: cutting bed 2400x1000mm Year of construction: 2011 Operating hours: 8350 High-pressure pump: 4000 bar Includes: software / abrasive system / pump / water treatment / etc. Gsdpfx Ajz A Aa Hoatoui The waterjet is suitable for cutting various materials and material thicknesses, making it a versatile machine for industrial production and custom work. The machine is currently still installed and can be inspected in working order by appointment. If you are seriously interested, please do not hesitate to contact us. Additional photos, videos, and technical data are available upon request.

Condition: used, Year of construction: 2010, We offer this used Flow Mach 4 4020b Dynamic XD waterjet cutting system, manufactured in 2010. Manufacturer: Flow Model: Mach 4 4020b Dynamic XD Year of manufacture: 2010 Condition: used Machine type: waterjet cutting system Flow Mach 4 4020b waterjet cutting system | 6,000 bar HyperJet | Dynamic XD | Service 01/2026 Description: For sale is a powerful and recently serviced precision waterjet cutting system from the world market leader FLOW, model Mach 4 4020b. The system is equipped with Flow's high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. A special highlight for buyers: In January 2026, a comprehensive technical service was carried out by the manufacturer (Flow Europe GmbH). This included the installation of an official drive controller retrofit kit. Since original replacement controllers for this model year are often no longer available, this upgrade provides long-term spare parts security and a modernized electronic control system. A test cut was successfully performed after the conversion. Technical data: • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with angular error correction) • Abrasive system: Flow Paser 4 • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 hp / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 Guodpfx Aozwpfheatoi • Connection values: 400V, 50Hz, 3 phases (120A full load) Condition & Equipment: • Technical condition: Very good, ready for immediate use. • Maintenance history: Current technical service report from the manufacturer is available (January 2026). • Upgrades: New drive controllers (retrofit kit) and refurbished wiring of the C-axis. • Productivity: The 6,000 bar technology enables up to 50% faster cuts compared to standard systems. Scope of delivery: • Waterjet cutting system Flow Mach 4 4020b • High-pressure pump HyperJet 100 • Control terminal incl. software • Technical acceptance report / service report from 01/2026 Location & Inspection: 78549 Spaichingen (Germany) An inspection of the system under power is possible by prior arrangement from September 15, 2026. Sales & Legal notes: The sale is exclusively in the B2B sector (commercial sale) with the exclusion of any liability for defects, guarantee and warranty ("sold as is"). Returns, exchanges and renegotiations are excluded. All information, data and descriptions are provided to the best of our knowledge and belief, but without guarantee of completeness, accuracy and topicality. The buyer is required to check the technical data, equipment features and the condition of the system on site before the purchase. Dismantling, loading and transport are the sole responsibility of the buyer and at his expense. If you have any questions or require further information, please feel free to send us a message or call us. Waterjet cutter, Waterjet cutting machine, Découpe jet d'eau, Taglio a getto d'acqua, Wycinarka wodna, Rezanie vodným lúčom, 5-axis waterjet, Dynamic XD, Flow HyperJet, 4000x2000, Large format cutting system.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, CNC waterjet cutting machines PB-C 4020 COMBI X working area max.: 4000 mm Y working area max.: 2000 mm Control system: TCI CNC 4.0 Gueds Afm Hiepfx Aatsi Operating hours: 13,859 hours Laser beam on: 2938 hours Sheet metal thickness max.: 60 mm Workpiece weight max.: 3000 kg The waterjet cutting machines from TCI Cutting combine state-of-the-art European technology with individual further developments, based on many years of experience in the industry, both nationally and internationally. The PB-C COMBI combines the advantages of waterjet cutting technology with those of HD plasma cutting in a single machine. This offers our customers cutting precision, versatility, and speed, as well as the quality typical of HD plasma. In short: a complete solution that guarantees the highest surface quality for cuts of varying complexity, material thickness, and material type. The machine enables the cutting of workpieces with pure water or with water and abrasive, even with very hard and thick materials. As a result, it covers a broad spectrum of cutting processes, which can be adapted to the needs of the customer and the respective industry. In waterjet cutting, the workpieces are cut cold, which avoids changes in the chemical composition and deformations – especially in metals. - Plasma source Hypertherm XPR300 - Various nozzles for the cutting head - High-pressure pump KMT SLVI 50 STD Maximum pressure: 3800 bar Power: 37.5 kW - Water treatment system - Silo and dosing system for abrasive sand - Slurry flushing and filter system

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 62005_2.0x3.0-30HP, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, total length: 3,500 mm, total width: 2,500 mm, Equipment: safety light barrier, NEC / DUAL HEAD Power Jet Systems Multi-Axis Waterjet Cutting Table Sold with x2 Digital Control High-Pressure Waterjet Pumps HP Pump Models: SX 222 V3 (Yr. 2005) Pump & SX 245 Pump (Yr. 2001) Plus, includes KMT Abrasive Hopper TWIN HEAD Industrial CNC Waterjet Cutting System: Manufactured by NEC Power-Jet Systems, this heavy-duty multi-axis waterjet cutting table is designed for precision cutting applications using pure water and/or abrasive waterjet technology. The machine features a rigid steel box-frame construction with integrated water tank, servo-controlled motion system, and industrial CNC control software. Suitable for engineering, fabrication, stone, glass, plastics, composites, rubber, foam, and metal cutting applications. Key Features: Multi-axis CNC waterjet cutting table Precision Ball Screw or Precision Rack & Pinion drive systems Linear bearing slideways Baldor digital servo motors and drive system Touchscreen operator interface Dedicated waterjet cutting software Integrated water tank/cutting table Adjustable water level system Abrasive distribution system mounted on gantry or Z-axis carriage Pure water and abrasive cutting capability Multi-head cutting configurations available Heavy-duty steel framework construction Stainless steel and anodised aluminium wetted components CAD/CAM compatibility with kerf compensation Nesting and material optimisation capability Dry-run facility and programmable jogging functions Technical Specification Construction Rigid heavy-duty steel framework Integral cutting tank and table Enclosed drive systems Cable trunking for protected service routing Local abrasive transfer unit Stainless steel and anodised aluminium wetted parts Integrated operator panel and electrical controls Motion System Precision Ball Screw drive (MaxiJet models) Precision Rack & Pinion drive (MidiJet models) Linear bearing guideways Baldor digital servo drives and motors Multi-axis configurations available: 2, 3 or 5-axis systems Software & Control Proprietary Power Jet cutting software CAD/CAM import capability Kerf compensation Material nesting and optimisation options Programmable jog speed control Home and return-home functions Dry-run programme verification Standard Machine Sizes MaxiJet: High-precision CNC waterjet table Ball screw drive system Standard cutting area: 2m x 3m Applications / Suitable for cutting: Steel Stainless steel Aluminium Stone Glass Plastics Rubber Foams Composite materials Technical engineering materials NEC Power Jet CNC Waterjet Cutting Machine | Multi-Axis Abrasive Waterjet Table | Servo Controlled Search Keywords Waterjet cutter, CNC waterjet, abrasive waterjet machine, pure waterjet cutter, Power Jet Systems, MaxiJet, MidiJet, industrial cutting table, CNC cutting machine, water jet cutting system, fabrication equipment, engineering machinery. Gsdpfx Aaoz Nll Hstoui

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, input voltage: 480 V, input frequency: 60 Hz, FLOW Mach 4 Waterjet Cutting Machine (6000 bar) Main specifications: Manufacturer: FLOW Model: FLOW Mach 4 Working area: 4 x 2 m Year of manufacture: 2014 Pump: WMC 87k High-Pressure Intensifier, 6000 bar (dual intensifier) Pump power: 100 HP Cutting head: 3-axis with taper compensation During cutting, the water jet naturally forms a slight cone, which can cause the edge of the part to be slightly angled. The taper compensation automatically tilts the head, ensuring that the edges remain straight and perpendicular. This results in higher accuracy and cutting quality, especially on thick materials, without the need for any secondary machining. Key advantage: spare intensifier included The machine comes with an additional spare intensifier. This is a significant advantage, as the intensifier is one of the key components and the most heavily loaded part of the pump. Having a spare on hand allows for a quick return to work if the main intensifier requires servicing, minimizing downtime. Included with the machine and pump: - Water filtration station - Abrasive feeder - Several spare parts - Spare intensifier - Abrasive removal system Gusdpfx Aj Agug Neatoi Condition: The machine has been operating continuously, 24/7, so we cannot provide the exact number of operating hours. However, it has been maintained according to FLOW’s service schedules throughout this period. The machine is still in operation.

Condition: excellent (used), Year of construction: 2014, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: 1000001927, travel distance X-axis: 3,210 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, pressure: 3,800 bar, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 15 m/min, INTERMAC PRIMUS 322 METAL – 5-AXIS WATERJET – YEAR 2014 Approximately 2,200 operating hours | Working area 3,210 × 2,000 mm | BFT Ecotron 38.22 pump | 3,800 bar B&B Waterjet Abrasive offers for sale a used Intermac Primus 322 Metal 5-axis waterjet cutting system, year 2014, complete with a 22 kW BFT Ecotron 38.22 high-pressure pump. The machine is in excellent condition and was disassembled while in working order. It is currently disassembled at our Onara di Tombolo (PD) location, where it can be viewed by appointment. A functional test is not available in its current state. The 5-axis configuration allows for machining with an inclined head, offering greater versatility compared to vertical cutting alone. Gujdpe Aduy Ijfx Aatei TECHNICAL DATA • Manufacturer: Intermac / Biesse • Model: Primus 322 Metal – Waterjet • Year of manufacture: 2014 • Configuration: 5 axes, X / Y / Z / A / C • Machine operating hours: approximately 2,200 • Working area X/Y: 3,210 × 2,000 mm • Z-axis travel: 200 mm • A-axis tilt: ±60° • C-axis: continuous rotation • Maximum axis speeds X/Y/Z: 45 / 45 / 15 m/min (not cutting speed) • Allowable load on the table: 1,000 kg/m² HIGH-PRESSURE PUMP • BFT Ecotron 38.22 • Pump motor power: 22 kW • Maximum pressure: 3,800 bar • Maximum flow rate: 2.3 l/min • Pump power supply: three-phase, 400 V, 50 Hz APPLICATIONS Abrasive waterjet cutting of metals, including steel, stainless steel, aluminum, copper, brass, and titanium, as well as stone, ceramics, and non-tempered glass. Thicknesses, speeds, and achievable quality depend on the material and processing parameters. REQUESTED PRICE: €50,000 + VAT The price includes the machine and the BFT Ecotron 38.22 pump. Transport, installation, commissioning, training, and other ancillary services are excluded and can be quoted separately depending on the destination and the customer's requirements. B&B WATERJET ABRASIVE: YOUR WATERJET PARTNER With over 17 years of experience in the industry, we support the customer from the selection of the system to its daily management. We can assist with installation and commissioning, operator training, technical assistance, and maintenance, as well as the supply of spare parts and abrasives. A single point of contact to guide you through the purchase and support you over time. To receive more information, arrange a visit, or request a quote including the necessary services, please contact us, indicating the installation location and your production requirements. B&B Waterjet Abrasive

Condition: used, Year of construction: 1997, CNC-controlled high-pressure waterjet cutting system with two cutting heads, abrasive feed, and two external high-pressure pumps. Manufacturer: H.G. Ridder Automatisierungs-GmbH Model: HWH-6020-2 Machine type: CNC waterjet cutting system Year of manufacture: 1997 Working area: 6,000 x 2,000 mm Number of cutting heads: 2 High-pressure pumps: 2 external pumps Maximum pump pressure: 4,000 bar each Control system: Siemens SINUMERIK Cutting process: Waterjet cutting with abrasive feed Cutting head designation: WARDICUT Abrasive feed: Present Cutting table: Water basin with slat support Machine order number: 10317 Electrical schematic number: E-10317 Electrical connection value: 100 kVA Mains connection: 3-phase Mains frequency: 50 Hz Geds Aiccdopfx Aateui Operating voltage: 400 V Control voltage: 230 V AC / 24 V DC Rated current: 150 A Intended upstream fuse: 200 A, slow-blow

Condition: reconditioned (used), travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, warranty duration: 6 months, CARETTA MODULA 4020 – 3-AXIS WATERJET – 4,000 × 2,000 MM – REFURBISHED WITH WARRANTY Available without pump or complete with a KMT Streamline SL-V 50 Classic 50 HP pump. The first year of CAD-CAM IGEMS subscription is included in both configurations. B&B Waterjet Abrasive offers a Caretta Technology Modula 4020 3-axis waterjet cutting machine, with a working area of 4,000 × 2,000 mm, self-aligning gantry, and ECS CNC 1802 numerical control. The machine is supplied with refurbished or new components, a new Dialine cutting head with integrated diamond, and a new abrasive metering unit. CONFIGURATIONS AND PRICES • €40,000 + VAT: machine without high-pressure pump, with the first year of IGEMS subscription included. • €65,000 + VAT: machine complete with a KMT Streamline SL-V 50 Classic pump, with the first year of IGEMS subscription included. From the second year onwards, the IGEMS subscription costs €1,500 + VAT per year. For both configurations, transport, installation, commissioning, training, and other ancillary services are excluded and can be quoted separately. TECHNICAL SPECIFICATIONS • Manufacturer: Caretta Technology • Model: Modula 4020 • Technology: abrasive waterjet cutting • Configuration: 3 axes with self-aligning gantry • Working area: 4,000 × 2,000 mm • Controlled Z-axis, 200 mm stroke Guedpfx As Ad I U Ejatoi • Numerical control: ECS CNC 1802 • Cutting head: new Dialine with integrated diamond • Abrasive metering unit: new • Abrasive tank: 200 liters • Motors and drives: Yaskawa • Guides and slides: INA • Rack: Güdel with helical teeth • CAD-CAM software: IGEMS, first year of subscription included SLUDGE SYSTEM INCLUDED IN BOTH CONFIGURATIONS Provision for a sludge disposal system, with a tank, semi-automatic electrical panel, and diaphragm pump included in the supply. PUMP FOR THE €65,000 + VAT CONFIGURATION • Brand: KMT • Model: Streamline SL-V 50 Classic • Power: 50 HP / 37 kW • Maximum pressure: 3,800 bar • Flow rate at 3,800 bar: 3.7 l/min • Topwork refurbished to new condition • Oil and filters replaced The indicated power refers to the pump, not to the total power consumption of the system. WARRANTY, DELIVERY, AND LOCATION Both configurations include: • 6-month / 1,000-hour warranty, according to the offer conditions. • Delivery expected within 8 weeks from receipt of order. Machine can be viewed by appointment at: Via Campolongo, 81E – 35019 Onara di Tombolo (PD), Italy. B&B WATERJET ABRASIVE – OVER 17 YEARS OF EXPERIENCE We support you from the selection of the machine to after-sales service: installation, commissioning, operator training, maintenance, spare parts, and abrasive supply. Services are quoted based on the requirements and the machine's destination. Contact us specifying the desired configuration, the materials to be processed, and the installation location: we will prepare a customized offer.

Condition: used, Year of construction: 2016, controller model: , _____ Description: Year of manuf. : 2016 Base axis (X) : mm Outrigger (Y) : mm Technical Specifications Working area X/Y:4,000 × 2,000 mm Material support area X/Y:approx. 4,100 × 2,100 mm Z-axis travel:approx. 150 mm Max. traverse speed:12,700 mm/min Max. contour cutting speed:7,620 mm/min X/Y positioning accuracy:± 0.04 mm/m X/Y repeatability:± 0.05 mm High-Pressure Pump Manufacturer / Model:Flow HyPlex Prime 30 Motor power:22 kW (30 HP) Max. design pressure:4,150 bar Continuous operating pressure:3,800 bar Max. flow rate:3.1 l/min Power supply:400 V / 50 Hz / 3-phase Standard Equipment :-Dynamic Waterjet XD 3D cutting technology, up to 60° head movement :-PASER 4 abrasive cutting system :-Abrasive storage hopper, capacity approx. 285 kg :-Premium stainless steel catcher tank with water level control :-CleanCut material support system :-Flow Shields splash protection Gsdpfx Aajz S S Efotoui :-Safety light curtain :-FlowMaster PC control system Additional Equipment :-Flow UltraPierce piercing assistance system :-DynaBeam laser height sensor :-LaserPointer :-Pure water conversion kit

Condition: used, functionality: fully functional, 3-axis waterjet machine, used, in working condition. Gujdpfx Aj Adqi Esatei

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Guedpfepu A D Aex Aatji Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: used, Year of construction: 2017, x-travel 2010 mm y-travel 3010 mm z-travel 200 mm Capacity 4000 bar table load 1200 kg/m2 feed 10/5 m/min Table 3000 x 2000 mm control FANUC dimensions of the machine ca. 10,3 x 4,2 x 3,25 m used CNC water cutting machine in gantry style - high pessure pump 4000 bar - cutting tool WJS Basic cutting head, abrasiv dosing device - CAD/CAM software IGEMS 2D CAD, 2D CAM and AWJ modul - pressure vessel 200 ltr./ abrasive tower 1 tonne Guedpfx Aezmitksatsi - abrasive controling package - abrasive disposal package - Remote control software - collision protection package - nesting level 1 + 2

Condition: good (used), functionality: fully functional, 1 x Fortress Technology standard metal detector head. Model – PHANTOM. Serial number – J-19842-11013. Aperture dimensions – 350mm wide x 175mm high. Frequency – 153 kHz. Voltage rating – 200-240 V / 50-60 Hz / 1 phase. Gedpfx Ao Ahutveateui

Year of construction: 2022, condition: excellent (used), functionality: fully functional, 1 x Yamato Dataweigh 14-head weigher with RCU-920 Remote Control Unit touch-screen control panel, top cone, collating funnel and collection bucket. Fitted with smooth weighing pans, this weigher is ideal for free-flowing dried goods only. Model – ADW-E-1014S (Dataweigh Epsilon Series). Serial number - WG251076. Date of manufacture - 2022. Weighing range - 20g to 3000g. Maximum pack volume - 10 litres. Speed - up to 100 drops / minute. Electrical requirements - 200-240 V / 50-60 hz / 1 phase. Guedpfx Ajzydaxoatji Overall dimensions - 1600mm long x 1600mm wide x 1530mm high. Supplied with User Manual, Drawings (including electrical) and Parts Manual.

Condition: good (used), functionality: unexamined, 1 x Yamato 14-head weigher with RCU-9 control panel, collection bucket and fitted with smooth weighing pans. Gusdpfxo Ahutys Aatji Model - ADW-514AWCC. Serial number - 5611205. Weighing range - 4g up to 500g. Speed - up to 120 packs/minute, depending on product weight. Previously used to weigh confectionery products.

Condition: as good as new (ex-display), Year of construction: 2016, operating hours: 7,000 h, machine/vehicle number: 0012, REM SC 33 CNC 2MS | Dual-Head CNC Vertical Turning Center | Ø3,300mm Heavy-duty CNC Vertical Turning Center with two independent milling heads and dual automatic tool magazines — built for continuous precision production of large components. CAPACITIES: Gujdpj Ai D S Nsfx Aatei • Max. Turning Diameter: 3,300 mm (per head) • Max. Machining Height: 2,000 mm (under cross rail) • Max. Workpiece Weight: 20 tonnes WORK TABLE: • Table Diameter: 3,000 mm • Speed (infinitely variable): 1–110 rpm • Main Motor Drive (AC): 100 kW MILLING HEADS (2×): • Each head with independent ATC tool magazine • Simultaneous or independent dual-head operation • CNC-controlled X, Z, W axes KEY ADVANTAGES: ✔ Dual-head configuration = double productivity ✔ Proven REM design — used in energy, mining, and heavy industry ✔ Rigid, thermally stable construction for long-term precision ✔ Full CNC control with digital drives Manufactured by REM Bacau – Romania | Over 60 years of VTL expertise. Machine available for inspection under power. Worldwide export. Contact us for full technical datasheet, video, and quotation.

Condition: refurbished (used), Year of construction: 2021, operating hours: 45 h, machine/vehicle number: 202021, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) Gujdpfswrn Iyox Aatsi 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. used high-pressure pump BFT Ecotron 40.22 (650 operating hours) (Product photo as an example) The machine is CE-certified.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, ## 2021 Star SB-20R Type G – 20 mm CNC Sliding Head Lathe 7 axis | Twin spindles | Driven tooling | Guide-bush / non-guide-bush operation | FMB magazine bar feeder Available from Swiss CNC, this 2021 Star SB-20R Type G CNC sliding head lathe combines 20 mm bar capacity, twin-spindle machining and a versatile tooling platform for precision component production. Equipped with FANUC CNC control, it offers turning, milling, drilling, tapping and back-working capability within a compact machine layout. The 10,000 rpm main spindle and 9,000 rpm sub-spindle both feature C-axis control, supporting accurately positioned machining operations on the front and rear of the component. The fully independent sub-spindle allows front- and back-working operations to overlap where the component and programme permit, helping reduce cycle times and minimise additional handling. ### Guide-bush and non-guide-bush flexibility A key feature of the SB-20R Type G is its ability to switch between guide-bush and non-guide-bush operation. Guide-bush mode supports the material close to the cutting point, making it particularly suited to slender components and longer turned features. For shorter components, non-guide-bush operation can reduce bar remnant length and improve material utilisation. This flexibility allows manufacturers to adapt the machine to different component geometries and production requirements. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SB-20R Type G | | Year of manufacture | 2021 | | Maximum machining diameter | 20 mm | | Controlled axes | Seven: X1, Y1, Z1, C1, X2, Z2 and C2 | | Maximum headstock stroke — guide-bush mode | 205 mm | | Headstock stroke — non-guide-bush mode | Up to 2.5 × bar diameter, maximum 50 mm | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 9,000 rpm | | Sub-spindle chucking capacity | 20 mm | | Spindle positioning | C-axis control on both spindles | | CNC control | FANUC CNC | | Rapid traverse | Up to 35 m/min | ### Tooling capability - Gang-type turning-tool arrangement, with six 12 mm or seven 10 mm square turning-tool positions, depending on the fitted tool block. - Four front-working sleeve positions for end-working operations. Gedpoz U Acmefx Aatsui - Cross-drilling and milling capability, with modular cartridge tooling configurations available for different machining requirements. - Four-position back-working station, supporting static or driven tooling according to configuration. - Independent sub-spindle movement for component transfer and rear machining. ### Included equipment - FMB Turbo 2-20 automatic magazine bar feeder for 3.2 m bar stock. - Filtermist FX mist extraction system. - LNS MH500 Turbo swarf conveyor. - FireTrace fire suppression system. - Selection of tooling and workholding. The supplied bar feeder, extraction and swarf-handling equipment provide a practical package for manufacturers looking to add automated 20 mm bar-machining capacity. ### Machine hours and availability Power-on and cutting hours to be confirmed. 2021 machines available in the UK, offered individually. Price on application, plus VAT. Delivery, installation and training available. Contact Swiss CNC for pricing, machine videos, inspection arrangements and further information.

Condition: excellent (used), functionality: fully functional, 1 x Fortress Technology Ferrous-in-Foil metal detector head. Model – PHANTOM FIF. Serial number – I-17321-10206. Aperture dimensions – 365mm wide x 180mm high. Voltage rating – 200-240 V / 50-60 Hz / 1 phase. Gujdpj Ahutnjfx Aatsi

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,000 h, functionality: fully functional, ## 2008 Star SR-20RIII – 20 mm CNC Sliding Head Lathe Seven controlled axes | Twin spindles | Driven tooling | FMB magazine bar feeder | 140-bar coolant Available from Swiss CNC, this 2008 Star SR-20RIII CNC sliding head lathe combines 20 mm machining capacity, twin spindles and driven tooling for the production of precision components from bar. Equipped with FANUC Series 300iS-Model A CNC control, it offers versatile turning, milling, drilling, tapping and back-working capability. The sliding head and guide bush arrangement supports the material close to the cutting point, making the machine particularly suited to small-diameter and slender components. C-axis control on both spindles allows accurately positioned machining features, while the opposed sub-spindle enables rear-face finishing and secondary operations within the same machine cycle. Independent front- and back-working capability allows operations to overlap where the component and programme permit, helping reduce cycle times and the need for additional handling between machines. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SR-20RIII | | Year of manufacture | 2008 | | Maximum machining diameter | 20 mm | | Maximum headstock stroke | 205 mm | | Controlled axes | Seven: X, Y, Z, XB and ZB, plus C-axis control on both spindles | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 8,000 rpm | | CNC control | FANUC Series 300iS-Model A | | Rapid traverse | Up to 35 m/min | | Approximate machine weight | 2,200 kg, excluding bar feeder and ancillary equipment | ### Standard tooling layout - Six turning-tool positions for external turning, profiling, grooving and parting. - Five radial driven-tool positions for cross-drilling, milling and tapping applications. - Four front-working sleeve positions for end-working operations. - Four-position back-working station for machining components held in the sub-spindle. ### Included equipment - FMB Turbo 3-36 automatic magazine bar feeder for 3.2 m bar stock. - 140-bar high-pressure coolant system — approximately 2,000 psi. - LNS MH500 swarf conveyor, compatible with long-parts ejection. - JBS guide bush system. - TriMist Extraction - Noble fire suppression system. Guedpfx Aajz Uxmbstji The combination of magazine bar feeding, high-pressure coolant and swarf handling provides a useful equipment package for repeat batch production and components requiring several machining operations. ### Machine hours Approximately 56,000 power-on hours. Cutting hours - 17,000 Available in the UK. Price on application, plus VAT. Contact Swiss CNC for pricing, machine videos, inspection arrangements and delivery or installation requirements. *Tooling layout describes the standard model configuration; the supplied toolholder package is subject to confirmation.*

Condition: good (used), Hang 150 Double-Head Riveter for Binders Gujdpfx Aas Af E Irotoi Manufacturer: Hang Germany Machine has been overhauled and is ready to use. The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Cardboard thickness: 0.2-4mm Throat depth: 310mm Head spacing: adjustable from 35-440mm Cycle time: 0.5s Weight: 570kg Power supply: 380V The cycle is initiated by a foot pedal.