Used Meca for sale (415)

Condition: like new (used), functionality: fully functional, machine/vehicle number: 22-01050762, Used divider plate Brand: Meca-Divimek 160mm 3-jaw chuck It has a point. Brake torque: 30kg Servomotor: 2000 rpm Weight: 70kg Maximum load admitted horizontally: 150kg Vertical position at 200mm: 75kg (With counter-point: 150kg) Servo drive used Brand: Fagor Automation Model: ACS-10 S/N: 22-01050762 Hfodjr Epa Ispfx Aacon

Condition: excellent (used), Year of construction: 2002, MECA PLASTIC MECA ID.NO. 2620 Meca Plastic mod Meca tray sealer with 2x tools Vacuum / Gas machine. Busch 160 cc vacuum pump year mod 2002 very nice condition! Tools 1. 255 x 255 mm Tool 2. 320 x 255 mm. Hfodpfx Aajqu Tw Hocon Dimensions 430 x 115 cm H 160 cm.

Condition: used, Promecam CTH425 Powered Guillotine, Force 1300, Course 110, 2400mm Wide, Light Guards at Rear. S/No. 220. Country of Origin: France Pre-auction offers considered. Hedpexnl Itefx Aacefn Please Note: These lots are located in Hertfordshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: like new (used), Year of construction: 1997, AMADA MODEL ITS2 103 100 TONS X 3000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing Hodpfx Aoh H Duheacofn year 1997 stock no. 01853 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 100 TONS BENDING LENGTH 3000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE MACHINE HEIGHT 2340 MOTOR POWER 9 KW can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: repair required (used), Year of construction: 2009, functionality: not functional, travel distance X-axis: 7,400 mm, travel distance Y-axis: 1,460 mm, travel distance Z-axis: 620 mm, 7.4 Mtr 4-Axis machining centre for sale as spares or repair. X-Axis travel 7400mm, Y-Axis travel 1460mm, Z-Axis travel 620mm, A-Axis +/- 90 deg, Electrospindle power 5.5kw. Pros: New spindle in head in last 5 years, new clipper unit in last 5 years, many new cables in last 12 months. Cons: Head doesn't move and we've been told it could be the motor but this isn't 100% guaranteed. Hjdpfsw Nwrusx Aacsfn This will be sold as seen with no guarantee. Any inspection is welcome. The perimeter soundproof cabinet IS NOT included in the sale. The buyer will be responsible for the removal and transportation from our premises. Please note: Price advertised is + VAT.

Condition: ready for operation (used), AMADA PROMECAM 3000 x 6 shears Type GPX 630 Capacity 3000 x 6 Maximum stroke 160 mm Hfsdpsvt Svrofx Aacjn Rate 16 to 45 strokes/min Cutting angle from 40' to 2°20' Rear stop stroke 1000 mm Motor 15 kw Approximate weight 6500 kg Dimensions 3750x2000x1850 mm

Condition: used, functionality: fully functional, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, Amada Promecam Guillotine Shear Type GPX 630 For more information, please contact us BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS Hfodpfexgpqvox Aacen

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Mecatherm Baguette Line Brand: MECATHERM – Model: TRADIVIDER RT II * Dough dividing from 200 g to 1000 g * Output up to 1700 kg/h for highly hydrated doughs and long proofing times Dough divider hopper – Capacity: 250 kg for pre-portioning of 15 kg Hjdpfxoxn Irue Aacefn Divider – Brand: MECATHERM – TRADIVIDER Type 32/16, including: * 1 sorting hopper – Capacity: 300 liters * 1 multi-piston dividing chamber on a swing frame * 1 swing frame drive system * 1 pin-type dough gripper * 1 dough piece receiving conveyor * 1 discharge conveyor * Dividing range: 200/400 g with 32 pistons – Capacity: 1360 kg dough per hour * Dividing range: 350/1000 g with 16 pistons – Capacity: 1700 kg dough per hour Electrical equipment Dusting machine * Complete flour dusting of the dough with reclamation of excess flour Intermediate Proofing and Resting Block Brand: MECATHERM – Model: RTH, including: * 1 inclined conveyor – Width: 400 mm with curve and discharge belt on the first level * 1 automatic station for pre-proofing, moulding, scoring, elongating, and depositing on honeycomb trays * At the end of the conveyor: 1 6-tray stacker with grissini to enhance operator efficiency * Mesh return conveyor under the RT block Output for long loaves and baguettes: up to 2,500 loaves per hour; for small breads: 5,000 to 12,500 pieces per hour Portioning area for long dough pieces: 2, 3, 4, 5, or 6 portions Maximum length of long dough pieces: 800 mm * RT block length: 8.17 m * RT block width: 1.41 m * RT block height: 3.05 m Line in good condition when production ceased in May 2021 – currently disassembled and stored in containers Commissioned at the beginning of 2014 Delivery and commissioning available upon request

Year of construction: 2015, condition: excellent (used), Mecasonic MCS2 CAB ultrasonic welding system - Very good condition - Year of manufacture: 2015 - 3 units available - CE declaration of conformity given - Condition: Incoterms EXW CH-4528 Zuchwil Hodpfx Aaevvw Ekocofn - Loading options available

Condition: used, Year of construction: 2023, operating hours: 307 h, * Incl. tipping skip * Speed: 26 km/h * Operating hours: 307 * Payload: 6 t * Transport width: 2,200 mm ---- Internal vehicle number 11311 ----- Subject to errors & prior sale Hedpfx Aasxmqzijcjfn

Condition: new, Year of construction: 2024, Hydraulic press MECAMAQ / C-frame series / 40 tons / type (PCC40) Technical specifications: - 40T force, activated by 1 double-acting cylinder (Ø130/Ø80). Hfedpfx Aajuhchcecsn - Dimensions of the lower plate 600x450mm, with "T" slots M12 (DIN650). - End of the piston rod mechanized for the attachment of Ø40x40mm tools. - Maximum opening 500mm. - Stroke of the hydraulic cylinder 250mm. - Outreach 250mm. - Hydraulic system with 2 speeds and automatic change of high speed by pressure activated by gear pumps. - Monitored hydraulic valves and hydraulic components installed on the machine according to hydraulic diagrams EN693 "Hydraulic system self-monitoring for hydraulic presses with downward stroke". - Maximum pressure of the hydraulic unit 300 bar. - Approach speed 28mm/s. - Working speed 7.5mm/s. - Retraction speed 45mm/s. - Motor power 4 HP (3ph. 400v 50Hz). - Stroke regulation by means of limit switches, with automatic retraction movement. - Pressure switch for maximum pressure regulation, with automatic retraction movement. - Activation of the machine by means of two-hand safety activation CAT.4. - LED lighting in the work area - Fixed side guard. - Machine color blue RAL5021 Scope of delivery: - User manual in ENGLISH with technical data for machine maintenance, machine in accordance with CE regulations. - The quoted price does not include any additional protective measures such as safety guards, fences, barriers, etc.; these must be taken into account depending on the location and specific working conditions.

Condition: refurbished (used), functionality: fully functional, Shear Brand: AMADA PROMECAM Model: GP1230 Capacity: 3000 x 12 Hodpfexfbb Rex Aacsfn Back gauge: 1000 mm Rear pneumatic sheet support Cylinder seals replaced – Blades sharpened – In compliance

Condition: used, functionality: fully functional, Year of construction: 1992, control type: CNC control, pressing force: 50 t, Equipment: CE marking, angle measuring system, angle stop, centralized greasing system, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Amada press brake Type ITPS CNC DELEM DA-GSR Year 03/02/92 Hfedpfxjwt Rfqs Aacjn Capacity 2 m 50 t Complete with tooling

Condition: good (used), Manufacturer ITALMECCANICA Model MECPOWER 4TB/1600 Year Feb-06 No. A11 Passage width 1600 mm Sanding group 4 Passage height 130 mm Grinding group 2 rollers Minimum workpiece length 400 mm Upper group 2, lateral group 2 Edge sanding yes Length 3300 mm Width 2450 mm Height 2250 mm Power 11kW Supply 3P+N+PE Weight 2500kg Hfodsxividjpfx Aacsn

Condition: excellent (used), Volume flow 3000 Pressure 3400 Pa Hfodpfx Aajilug Socen Filter 30 m2 Spindle speeds 2850

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Collection dates must be arranged in advance. Mecalac AX 700 - Including bucket - Tyres: 12.5-18 - Radio - Operating hours: 26 Subject to errors and prior sale. Internal vehicle number: W40 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Collection dates must be arranged in advance. Hfjdpjxlxbhofx Aacsn

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: SP 3933 C70232, Guill Volumetric Filling and Block-Bottom Bagging System, comprising of: Manufacturer - Construcciones Mecanicas Guill S.A. Serial number - SP 3933 C70232. Date of manufacture - 2004. Hopper with sensors. Volumetric filler with cups for 500g, 1kg and 2kg volumes. Guill Bagger - horizontal jaws 300mm wide. Vertical jaws 510mm. With SmartDate 2 coder / ribbon printer. Cutting, second sealing, folding and labelling machine. 1 - pulls air out and folds 2 - cut and seal 3 - bends folds top of pack 4 - fold clamped and sealed 5 - label applied. Electrical control box. Overall dimensions of above 3 machines - 3480mm long x 1700mm wide x 3650mm high. Also supplied with: Outfeed conveyor. Let dimensions - 1550mn long x 250mm wide. Lazy Susan, neoprene top. 1.23m diameter x 800mm operating height. Notes Hedpfexcp Rzsx Aacsfn Last production run in June 2025. Used for packing rice, could be ok for salt, sugar. Have change parts for 500g, 1kg and 2kg rice. Was being run at 38-40 packs per minute. Complete with manuals and electrical diagrams. Lots of spare small parts included - belt movers, rollers, etc.

Condition: used, Year of construction: 1993, CNC Lathe REALMECA type T400 Hfjdpfxexnpbws Aacon Travel X: 200 mm Travel Z: 600 mm Numerical Command: NUM 750 Between points distance: 700 mm Max machining diameter: Ø 210 mm Spindle speed: from 100 to 4000 RPM 12 tools Turret VDI 20 3-jaws chuck Ø 140 mm Year of construction: 1993 Spindle motor: FANUC Tailstock: CM4 Hydraulic Tailstock + Chuck Lubrification Voltage: 380 V Dimensions (L x W x H): 2500 x 1500 x 1700 mm Weight: approx 3 T

Condition: good (used), functionality: fully functional, Year of construction: 1999, operating hours: 23,000 h, Used AMADA press brake Type: HFB5025 Number of axes: 8 Backgauge stroke: 650 mm Ram stroke: 200 mm Hodpexb U Hlofx Aacofn Axes: X1, X2, R1, R2, Z1, Z2, Y1, Y2 CNC: O2000 with 2D graphic and USB reader

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Collection appointments must be agreed in advance without exception. Mecalac AS 750 - Incl. forks and bucket - Tyres: 12.5-18 - Side loader Hfodpfxexiuv As Aacon - Radio - Articulated loader - Operating hours: 9 Subject to errors and prior sale. Internal vehicle number: W70 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Collection appointments must be agreed in advance without exception.

Condition: used, Hydraulic Shear PROMECAM GH 1230 A Capacity: 3000 x 12 mm Hodpfxjxni Uko Aacefn Electrical Back gear gauge travel: 1000 mm Throat depth500 mm Photoelectric cells on the back New blades Length3600 mm Depth: 2400 mm Total height: 1900 mm Weight: 11 T

Condition: used, Year of construction: 2023, operating hours: 525 h, ATTENTION: Vehicle location is 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be arranged in advance. Mecalac 6MDX 4x4 - Including tipping skip - Speed: 26 km/h - Operating hours: 525 - Payload: 6 t - Transport width: 2,200 mm Hedpfsxiuviex Aacjfn Subject to errors and prior sale. Internal vehicle number: W45 ATTENTION: Vehicle location is 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be arranged in advance.

Condition: used, Year of construction: 2020, operating hours: 5,176 h, ATTENTION: Vehicle location is 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance without exception. Mecalac AS 900 - Including bucket and forks Hfodpfx Aasxiuu Sjcjn - Tyres: 14.5-20 - Radio - Operating hours: 5,176 Errors and interim sale excepted. Internal vehicle number: W41 ATTENTION: Vehicle location is 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance without exception.

Condition: used, Year of construction: 2020, operating hours: 1,978 h, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Collection appointments must be arranged in advance. Hodexiut Iopfx Aacjfn Mecalac AS 900 - Including bucket and forks - Tyres: 14.5-20 - Radio - Operating hours: 1,978 Subject to errors and prior sale. Internal vehicle number: W42 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Collection appointments must be arranged in advance.

Condition: used, Year of construction: 2020, operating hours: 1,876 h, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be arranged in advance without exception. Mecalac AF 1200 - Includes bucket and forks - Tyres: 14.5-20 - Radio - Operating hours: 1,876 Subject to errors and prior sale. Internal vehicle number: W43 Hjdpsxiup Aefx Aacsfn ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be arranged in advance without exception.