Used Amada Emz for sale (219)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,941 h, controller manufacturer: FANUC, controller model: n/a, overall weight: 21,000 kg, number of axes: 3, This 4-axis AMADA EMZ 3510 NT was manufactured in 2010. It features a punching capacity of 300 kN and includes 45 turret stations. With a power requirement of 27 kVA and a weight of 21000 kg, this CNC punch press is robust and efficient. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3510 NT machine we have for sale. Contact us for more information about this machine. Additional equipment • Power Required: 27 kVA • Noise Level: 91 dB (A) Machine Benefits Technical Machine Benefits • Stopping distance: 360 mm • Capacity: 300 kn Iodpfex Hlh Hex Ag Ustb Extra Information Machine still under power

Year of construction: 2016, condition: ready for operation (used), travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 37 mm, overall weight: 21,500 kg, total height: 2,342 mm, number of axes: 4, This 4-axis AMADA EMZ3612M2 was manufactured in 2016, featuring a high-speed servo-electric turret punch press with twin AC servo direct drive. It boasts a 33-ton press capacity and an AMNC-F / AMNC-4ie CNC system for enhanced control. The machine handles sheet formats up to 3050x1525 mm and includes a "King" turret with up to 58 stations. Energy efficiency is optimized with AC servo drives. If you are looking to get high-quality punching capabilities consider the AMADA EMZ3612M2 machine we have for sale. Contact us for more information. Additional equipment • Air-blow oil-mist lubrication • Slug-vacuum system • Digital tool ID / barcode system • Integrated tapping: inch/metric taps (M2.5–M8) • Marking & deburring tools: on-board marking and deburring options Machine Benefits Technical Machine Benefits • Type: high-speed servo-electric turret punch press with twin ac servo direct drive • Press capacity: 33 tons (300 kn) • Maximum sheet format (without repositioning): 3050 × 1525 mm • Turret type: “king” turret – triple-track, available in 55-station multi-purpose or 58-station version, with 4 auto-index stations including tapping units • Turret rotation speed: up to 30 rpm • Feed clearance: 25 mm between turret plates • Max sheet thickness: 4. 5 mm Itedpfox Nrktox Ag Ujb • Positioning speed (x/y): 100 m/min / 80 m/min Extra Information Machine still under power Dimensions Machine Depth 5436 mm

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 21000 kg Table Itsdpfx Aox Enlxjg Ueb Table load 160 kg Main Drive Number of axis 2 Movement X-Axis Movement 2500 mm Y-Axis Movement 1525 mm This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. Application Types Punching

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 21000 kg Main Drive Punching force 300 Kn Number of axis 2 Table Table load 160 kg Control Unit Brand FANUC Iedsx D Hpqopfx Ag Ustb Movement X-Axis Movement 2500 mm Y-Axis Movement 1525 mm This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. Application Types Punching

Year of construction: 2010, condition: ready for operation (used), A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, pressing force: 300kN, travel X/Y: 2500mm/1525mm, travel X/Y with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Traversing speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Turret stations 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34, machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation available. On-site inspection is possible. Iodpfx Aov Rp Tcsg Ujtb

Condition: excellent (used), Year of construction: 2002, Model .Amada. Vipros 368 King Stock number 01967 Year of manufacture 2002 Frame Construction ... Bridge Type Press Capacity ... 30 Tonnes (294 kN) Press Type ... High Speed Hydraulic Servo Ram Axis Traverse Distance ... 1525 x 2000 mm Workable Max. Sheet Size ... 1525 x 4000 mm (with auto repositioning) Max. Material Thickness ... 3.2 mm mild steel Max. Hole Dia. Max. Material ... . (shearing strength 36 kg/mm2) 82 mm dia Max. Material Weight ... 75 Kg Max. Material weight ( Max. Speed) ... 60 Kg Max. Hole Dia. ... 114.3 mm Number Of Stations ... 58 stations:24 x 12.7 mm 24 x 31.7 mm 4 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm Ijdpfx Aovn D Tfog Uetb 2 x 114.3 mm Axis Speed ... 113.0 m/min Hits Per Minute (2mm pitch) ... 860 H.P.M./3 mm stroke (8mm pitch) ... 560 H.P.M./3 mm stroke (25mm pitch) ... 460 H.P.M./3 mm stroke Turret Speed Bi-Directional ... 30 R.P.M. Punching Accuracy ... ± 0.1 mm (incl. 1 reposition) Ram Stoke Length (maximum) ... 40 mm Tool Lubrication ... Air Blow System Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 28 kVA 400V +/- 10% 50Hz Air Pressure Required ... 5.0 Kgf/cm2 Air Flow ... 250 1/min Cooling Water Flow ... Min 40 1/min. Machine Length ... 5025 mm Machine Width ... 4120 mm Machine Height ... 2630 mm (3190 mm to mirror) Machine Weight ... 18000 Kg

Condition: used, Amada Mega BS 400 SA, with swivel base, Dec 1989 Itsdjx Rkycepfx Ag Ueb

Condition: ready for operation (used), Year of construction: 2009, operating hours: 69,572 h, overall weight: 10,100 kg, total height: 2,010 mm, number of axes: 3, This 3-axis AMADA LC 3015 F1 NT CO2 laser cutting machine was manufactured in 2009. It has a mass of 11.4 tons and requires 98 kVA of power, with a laser capacity of 4.0 kW. If you are looking to get high-quality cutting capabilities, consider the AMADA LC 3015 F1 NT machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Power required: 98 kva • Capacity: 4 kw • Laser resonator: af4000i-b • Transformer: marx tg 516 Extra Information Machine with transport box (L x W x H): 7120×3150×2370 mm Weight (with transport box): 13,500 kg Laser Resonator (L x W x H): 2460×1140×1965 mm Laser Resonator Weight: 1,300 kg Combined Unit (L x W x H): 2332×1638×2201 mm Combined Unit Weight: Approximately 1,750 kg Itedjx D Enlepfx Ag Uob Transformer (L x W x H): 950×800×950 mm Transformer Weight: 484 kg Pallet Changer (L x W x H): 3868×2352×1010 mm Pallet Changer Weight (without liftable ball supports): 2,450 kg Pallet Changer Weight (with liftable ball supports [option]): 3,500 kg Electrical Connections Total Power Connection of the System: 400 V / 127 KVA Transformer Power Connection: 400 V / 89 kVA / 160 A Combined Unit Power Connection: 400 V / 38 kVA /55A Laser Resonator Power Connection: 200 V / 55 KVA Control and Drives Power Connection: 200 V / 34 kVA Operating Voltage: 3×400 V(±10%)/PE/50 Hz Max. Current Draw: 55 A Transformer Rated Power: 89 KVA Transformer Rated Primary Voltage: 3×400 V(±10%) Transformer Rated Secondary Voltage: 3×200 V Transformer Rated Primary Current: 132 A Transformer Rated Secondary Current: 257 A Compressed Air and Gas Requirements Total Compressed Air Requirement (air not used as cutting gas): 7 bar; 69.6 m 3/h Total Compressed Air Requirement (air used as cutting gas): Max. 9.7 bar; 132.6 m 3/h Compressed Air for Machine Functions ("Cooling Cut" and "Oil Shot"): 6 bar; 18 m 3/h Compressed Air for "ECO CUT": 6 bar; 18 m 3/h Compressed Air for Fume Extraction System DELTAComp 1500-8/9: 5 bar; 5.6 m 3/h Laser Gas Consumption: 10 liters per hour Cutting Gases: Oxygen, Nitrogen, and compressed air (if used as cutting gas) are required. Environmental and Location Requirements Operating Room Temperature: +15 to +35 °C Room Height: At least 4 m Lighting: At least 500 Lux Humidity: Less than 75% (without dew condensation) Vibrations: Must be resistant to seismic acceleration below 0.05 G (0.49 m/s 2) with an amplitude below 5 µm. Foundation Load Capacity: ≥49 kN/m 2

Condition: ready for operation (used), Year of construction: 2005, controller manufacturer: AMADA, stroke length: 200 mm, overall weight: 11,600 kg, pressing force: 173 t, This AMADA HFE170-3 press brake was manufactured in 2005. It features a maximum press force of 1700kN and a stroke up to 200mm. Weighing 11600kg, it operates on 400 Volts 50 Hz with a foreseen power of 16.5kW. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Voltage: 400 volts Itjdpfsyap Rwex Ag Ujb • Frequency: 50 hz • Nominal current: 286a • Foreseen power: 165kw Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Amada CNC-controlled turret punching machine, type VIPROS 368 KING. The machine is equipped with a loading system type PR 300 and an unloading system type MP 300. Itedox Sq Ipopfx Ag Ueb

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,000 h, controller manufacturer: AMADA, controller model: AMNC-3i, This 3-axis AMADA ENSIS 3015 AJ fiber laser cutting machine was manufactured in 2021. It features a high-capacity 9000 Watt fiber laser, capable of cutting up to 25 mm thick mild steel, stainless steel, and aluminum. The machine includes an automatic pallet changer, NC-focus control, and a 21.5” touchscreen AMNC-3i control system. Ideal for precision cutting, consider the opportunity to buy this AMADA ENSIS 3015 AJ. Contact us for more information about this machine. • Type: AMNC-3i • Screen: 21.5” touchscreen • Operating system: Windows 7 • Laser source: Laser diode-pumped fibre laser • Type: AJ-9000 • Laser power: 9000 Watt • Laser wave length: 1.08 µm • Stability: +/- 2% • Pulse frequency: 1–10000 Hz • Duty range: 1-100% • Working range: 3070 mm x 1550 mm • Positioning speed: 170 m/min • Table loading weight: 920 kg • Mild steel: 25 mm • Stainless steel: 25 mm • Aluminium: 25 mm • Brass: 18 mm • Copper: 12 mm • Machine weight (without pallet changer): 9500 kg • Automatic pallet changer • NC-focus control • Oil spraying function • Nozzle changer (16 nozzles) • Sensor cutting head • Diode for positioning • Cutting process monitoring • Safety device • Conveyor belt Itjdsx Uxkwepfx Ag Usb • Transformator • Cooling unit • Dust collector • Control panel pallet changer

Condition: ready for operation (used), Year of construction: 2012, operating hours: 15,279 h, controller manufacturer: AMADA, number of axes: 6, overall weight: 8,100 kg, total height: 1,988 mm, pressing force: 133 t, product length (max.): 4,755 mm, This 6-axis AMADA HD 1303 NT press brake was manufactured in 2012. It features a press capacity of 1300 kN, a bending length of 3110 mm, and a stroke of 250 mm. With a throat depth of 420 mm and speeds up to 200 mm/s, it's designed for efficient operation. Consider the opportunity to buy this AMADA HD 1303 NT press brake. Contact us for more information about this machine. • Distance between uprights: 2700 mm • Stroke: 250 mm • Open height: 590 mm • Throat depth: 420 mm Iodpfx Agex D Evpe Uetb • Speeds: • Approach: 200 mm/s • Working: 12 mm/s • Return: 120 mm/s • Hydraulic system: Oil tank capacity 48 liters • Ambient temperature range: 0–40 °C Technical Specification Bending Length 3110 mm

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Itodpjw Iq Ugsfx Ag Uob Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: used, Year of construction: 1989, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency Itodpfexaa N Nox Ag Ujb - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397088

Condition: used, Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units Ijdpfx Agexaaghj Uotb * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: used, Year of construction: 2000, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm dayligth 470 mm stroke 200 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec table width 180 mm table height 960 mm oil volume 235 L 0 300 bar controlled axis 6 Anzahl Number of working hours 29.400 h total power requirement 16.5 KW weight of the machine ca. 11910 kg range L-W-H 4025 x 2020 x 2900 mm well-maintained condition (!!) with only approx. 29.400 operating hours - in checked condition - machine video - ?v=APP0HZjMms4 Equipment: - electro-hydraulic CNC press brake - AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1 + Y2, R, Z1 + Z2) * swiveling operation - front left * tool & program library - CNC-controlled back stop adjustment (X-axis) * adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R-axis) Isdjxabgpjpfx Ag Uetb * adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1 + Z2) - hand control unit for manual movement of the axes - AMADA manual upper tool clamping system - AMADA Rehfuß upper tools - divided - AMADA Lower tool holder - incl. 1x V die (not complete) - AMADA DIGI PRO - gigital angle measuring system - 1x freely movable double foot switch - side protective device (swinging doors) - rear protective device (swinging door) - EMERGENCY OFF button at the front - Operating instructions (ENG)

Condition: used, Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Isdpfxoxabuto Ag Ustb Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 Ijdpfjxabnyox Ag Uetb - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions

Condition: good (used), sheet width 2540 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm 9.0 St. Iodpfx Aoxn Tx Hjg Uetb back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 2960 x 1990 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - 1 freely movable foot switch - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: used, Clamping device for table band saw, wood band saw, firewood saw, automatic band saw, material positioning, saw band rollers, saw band roller -Saw band roll: made from metal saw Amada HA-400 W -Diameter: 595mm -Shaft: Ø 50 x 70 mm -Receptacle: M16 x 2 -Dimensions: Ø 595 x 193 mm -Quantity: 1 piece available Isdpfx Aegal Avog Ustb -Weight: 51kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Itodpfx Aegag Ahog Ujb -Spare part: hydraulic cylinder from Amada HA-400W metal saw -Piston rod: Ø 28 mm -Stroke: 585 mm -Admission piston rod: M30 x 1.5 -Dimensions: 835/70/H200 mm -Weight: 17.1 kg

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103L LONG STROKE 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 1O3 L downstroke CNC Press brake Year 2001 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 620 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7600 kg Itjdpfsu Iukfjx Ag Ujb Bed Length 3000 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 1991, Press Brake Iedsx Tzl Ijpfx Ag Ujtb Manufacturer: AMADA PROMECAM Model: HFB 125/40 Year of manufacture: 1991 Control: DELEM DA 58 Max. pressing force: 1,250 kg Max. stroke: 180 mm Sheet thickness: 8 mm Working width / throat: 3.7 m Number of phases: 3 Power consumption: 11 kW Voltage/Frequency: 380/50 Rated current: 24 Weight: 9,900 kg Availability: immediately

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Amada Hydraulic Guillotine Shear Type GX II 630 Working width: 3050 mm Iedpfsxwmycox Ag Ustb Max. sheet thickness: 6.35 mm Robust CNC electro-hydraulic guillotine shear AMADA CNC touch control, located front left ("GP 37W2") Machine control system including information display Main display with 4 operating panels Control/operation of all machine functions Up to 50 cutting programs, each with up to 15 sequences CNC electromechanical backgauge Travel speed: 100 mm/sec CNC electro-hydraulic cutting angle adjustment CNC electro-hydraulic blade gap adjustment Sight device & cutting line illumination for viewing the scribe line Shearing according to optical scribe mark Manually adjustable table support plates including ball rollers Grip recesses in the front support table 2x movable foot switches Operating manual and circuit diagrams included

Condition: excellent (used), Technical data: Max. cutting diameter round steel: 700 mm Max. cutting diameter square steel: 800 x 700 mm Saw blade: 50 x 1.6 x 7600 mm Saw speed: 12 – 80 m/min Max. workpiece weight: 12,000 kg Itedpfx Agoyan Hdj Ueb NC control Motor power: 7.5 kW Dimensions (L x W x H): approx. 4350 x 2400 x 2700 mm Weight: approx. 6.5 t The seller assumes no liability for typographical or data transmission errors. The machine is in a condition appropriate for its age regarding appearance, technology, and wear; used machines are sold without any warranty.