Used Amada Lc 2415 for sale (186)

Condition: good (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, controller manufacturer: Fanuc, controller model: AMNC, laser type: CO₂ laser, laser power: 4,000 W, CNC laser cutting machine Amada LC 2415 alpha IV NT The machine is located in an operating facility and can be inspected while powered on. X working area max.: 2520 mm Y working area max.: 1530 mm Z working area max.: 300 mm Control system: Siemens Fanuc AMNC Laser power: 4000 watts Standard equipment: • Controlled axes: X, Y, Z (three axes are controlled simultaneously) • Maximum processing area: 5,040 × 1,550 mm (with repositioning) • Maximum simultaneous feed rate (X/Y): 114 m/min • Repeatability: ±0.01 mm • Maximum workpiece weight: 330 kg • Height of the processing surface: 820 mm • Dimensions of the workpiece channel: 550 × 1,750 mm • Laser type: CO₂ laser with fast axial flow and high-frequency discharge excitation Gujdpfjzxtkksx Ai Toi • Maximum cutting thickness: • Mild steel: 10 mm • Stainless steel: 10 mm • Aluminum: 8 mm

Condition: good (used), functionality: fully functional, Year of construction: 2006, AMADA LC-2415 ALPHA IV NT 2.5 kW Specification Details Manufacturer: AMADA Model: LC-2415 ALPHA IV NT Year of Manufacture: 2006 Condition: Used Machine Type: CNC CO₂ Laser Cutting Machine Laser Power: 2.5 kW Laser Type: CO₂ laser Laser Oscillator: FANUC AF2000i-C / AF2000E-LU2.5 CNC Control: AMNC-F / FANUC Total Operating Hours: 25,729 h Working Range – X Axis: 2,520 mm Working Range – Y Axis: 1,550 mm Working Range – Z Axis: 300 mm Maximum Processing Dimensions: 5,040 × 1,550 mm with one repositioning Maximum Table Load: 330 kg Maximum Cutting Speed: 20 m/min Maximum Positioning Speed – X/Y: 80 m/min Maximum Positioning Speed – Z: 60 m/min Positioning Accuracy: ±0.01 mm / 500 mm Repeat Positioning Accuracy: ±0.005 mm Maximum Sheet Thickness – Mild Steel: Up to 12 mm* Maximum Sheet Thickness – Stainless Steel: Up to 6 mm* Maximum Sheet Thickness – Aluminium: Up to 6 mm* Drive System: AC servo motors Number of Controlled Axes: 3 (X, Y, Z) Laser Wavelength: 10.6 μm Laser Beam Mode: TEM₀₀ equivalent Beam Divergence: < 2 mrad Laser Stability: ±1% Cutting Speed: 0–20 m/min Assist Gas Connections: 3 Automatic Gas Pressure Control: Yes Automatic Focus Adjustment: Yes Automatic Sheet Repositioning: Yes Automatic Sheet Loading/Unloading: Depending on configuration Cutting Head: HS-2003 Adaptive Optics: ActiveCut High-Pressure Cutting System: CleanCut Specification Details Gusde Abrlpspfx Ai Tsi Aluminium Cutting System: ALUCUT Extraction System: Included / depending on configuration Cooling Unit: Included Power Supply: 400 V / 50 Hz / 3-phase Compressed Air Requirement: Approx. 250 l/min at 6 bar Machine Length: 5,745 mm Machine Width: 2,630 mm Machine Height: Approx. 2,150–2,275 mm* Machine Weight: Approx. 7,500 kg Laser Class: Class 1 during intended operation * - The actual maximum sheet thickness that can be processed depends on the material, its quality and processing conditions.

Year of construction: 2006, condition: ready for operation (used), A CNC punching and laser cutting system Amada is available. Laser resonator: C-4000A, travel path X/Y: 2500mm/1250mm, laser power: 4kW, laser type: CO2, max. laser gas pressure: 4bar, max. cutting capacity: steel/stainless steel/aluminum: 25mm/15mm/10mm. Machine dimensions X/Y/Z: approx. 5700mm/2500mm/2300mm, weight: approx. 6400kg, control system: Amada. Including transformer TG515 (70kVA), cooling block, extraction system Keller Vario and beam path purging system Alphapac. Documentation available. An on-site inspection is possible. Gjdpfx Aoy Rtf Uji Tsui

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Gusdpfx Ajv Ip R Asi Tsi

Condition: ready for operation (used), Year of construction: 2017, operating hours: 14,429 h, controller manufacturer: AMADA, controller model: AMNC 3i, laser power: 3,500 W, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, overall weight: 7,700 kg, total width: 5,745 mm, total height: 2,271 mm, product length (max.): 2,630 mm, number of axes: 3, This 3-axis AMADA LC2415 Alpha 5 was manufactured in 2017. It features a maximum processing area of 5,040 × 1,550 mm and a powerful 3,500 W CO₂ laser, capable of cutting mild steel and stainless steel up to 10 mm thick. The machine has a maximum simultaneous feed rate of 114 m/min and can handle workpieces weighing up to 330 kg. If you are looking to get high-quality cutting capabilities, consider the AMADA LC2415 Alpha 5 CO₂ laser cutting machine. Contact us for further details. • Control: AMNC 3i • Controlled axes: X, Y, Z (three axes controlled simultaneously) • Maximum processing area: 5,040 × 1,550 mm (with one reposition) • Maximum simultaneous feed rate (X/Y): 114 m/min • Repeatable positioning accuracy: ±0.01 mm • Maximum workpiece weight: 330 kg • Processing surface height: 820 mm • Work chute size: 550 × 1,750 mm • Laser resonator: AF3500i-C • Laser type: Fast axial flow, high-frequency discharge excitation CO₂ laser • Wavelength: 10.6 µm • Maximum cutting thickness: • Mild steel: 10 mm • Stainless steel: 10 mm • Aluminum: 8 mm Gusdpfezzzx Iox Ai Tsi Additional equipment • MP300 Automatic Sheet Loading System

Condition: used, Year of construction: 1990, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Gujds Aa Aanspfx Ai Tsi TECHNICAL DETAILS General Information Machine Type: Press brake Condition: good Performance Data Pressing force: 80 t Bending length: 2,505 mm Frame width: 2,200 mm Total power consumption: 7.3 kVA Machine weight: approx. 5.6 t Control System Control: AMADA-MELDAS NC 9 F Controlled axes: 7 Dimensions Space requirement: approx. 3 × 2.25 × 2.20 m EQUIPMENT Detailed machine documentation available

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 21,713 h, machine/vehicle number: 007, laser power: 4,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, No minimum price – guaranteed sale to the highest bidder! Guodpfezrnhwex Ai Tsi The machine has been serviced annually (most recently in December 2025); service records are available. The Laser Turbo-Blower was replaced in 2021. The X-axis and Y-axis were renewed in 2023 after 27,066 operating hours. TECHNICAL DETAILS Travel range X-axis: 2,520 mm Travel range Y-axis: 1,550 mm Travel range Z-axis: 300 mm Travel range B-axis: 17 mm Cutting capacity, normal steel: max. 12 mm Cutting capacity, stainless steel: max. 10 mm Cutting capacity, aluminum: max. 8 mm Laser power: 4 kW Wavelength: 10.6 µm Laser beam diameter at the outlet of the laser resonator: 27 mm Cutting speed X-axis: 0 to 20 m/min Cutting speed Y-axis: 0 to 20 m/min Travel speed X-axis: max. 80 m/min Travel speed Y-axis: max. 80 m/min Travel speed Z-axis: max. 60 m/min Workpiece weight: max. 330 kg Material size: max. 1,500 × 5,000 mm Table height: 820 mm MACHINE DETAILS Control system: AMNC-F (FS-160I LPB) Minimum measuring unit: 0.001 mm Memory capacity: 10 MB Dimensions & Weight Machine dimensions (L × W × H): 5,745 × 2,630 × 2,151 mm Net weight: 7,700 kg Operating hours (according to counter) Operating hours: 34,401 h Runtime: 21,713 h Cutting time: 11,111 h EQUIPMENT Loading and unloading system Filtration system Manuals The seller can offer dismantling and loading of the machine for an additional fee. Within Germany, the seller can also offer an installation service at the new location.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,500 h, laser power: 2,500 W, punching force: 20 t, sheet thickness (max.): 6 mm, Punch-laser combination manufactured in 2011. This AMADA LC 2012 C1 NT features a punching force of 200 kN and a laser power of 2.5 kW. It includes 49 turret tool stations and comes with a chiller unit and transformer. If you are looking to get high-quality punching and laser capabilities, consider the AMADA LC 2012 C1 NT machine we have for sale. Contact us for further details. Gsdpj Ai D Ihofx Ai Tjui - Laser Resonator: AMADA FANUC AF2000E LU2.5 - Turret Tool Stations: 49 stations - Connected Load: 53 kVA - Stopping Distance: 190 mm - Noise Level: 96 dB(A) - Machine Net Weight: 18,000 kg - Included Peripheral - Chiller Unit: Manufacturer: Glen Dimplex Deutschland GmbH Brand: RIEDEL Precision in Cooling Chiller YOM: 2011 Electrical: 400 V, 3-Phase, 50 Hz, 31 A Enclosure Rating: IP 54 Refrigerant: R407C (8.0 kg) Max Working Pressure: 28.0 bar (HD) - Included Peripheral - Transformer: Brand: MARX Standard / Circuit: EN 60076 / Dd0 Model / Type: TG 412 (Amada Art: 8B/TG 414)Capacity: 50 kVA Frequency: 50/60 Hz Primary Voltage: 3 x 400 V (75 A) Secondary Voltage: 3 x 200 V (144 A) Insulation Class: T40F Protection Class: IP 23

Condition: ready for operation (used), Year of construction: 1999, We are offering this used Amada LASMAC LC-1212 A3 laser cutting machine, manufactured in 1999. Gjdpfx Asz Rvg Dei Tsui Manufacturer: Amada Model: LASMAC LC-1212 A3 Year of manufacture: 1999 Condition: ready for use If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 2012, condition: excellent (used), Used compact / small foot print Amada Lasmac LC – 1212 a IV NT flat bed 2d cnc laser cutting machine for sale: Fully serviced single bed very clean Amada LC – 1212 a IV NT cnc laser – Video at the bottom of this listing Specification: Most recent work carried out by Amada UK: New turbo blower recently fitted New lenses and mirrors in August 2022 Fully serviced with Amada Uk Year / New 2012 Gusdpfxsimwcbe Ai Tsi Power: 2.5kw Machine Model: LC – 1212 a IV NT Travel method: X-Axis Material Travel, Y Axis: laser Beam Travel Axis Travel Distance X x Y x Z M: 1270 x 1270 x 300 Positioning Speed X x Y x Z m/min: 80 x 80 x 60 Cutting feed rare X x Y m/min: 0 – 20 Control Method: X-, Y- and Z-axes (simultaneously controlled) + B – axis Max. sheet size X x Y x Zmm: 2540 x 1270 x 300 Repeatable positioning accuracy mm: +0.005 Oscillator model: AF2000E-LU2.5 AF4000E Oscillation Process: fast axial flow, high frequency discharge excitation Ideal if you are looking to bring laser cutting in house and space is a premium Delivery and installation can be arranged AMADA LASMAC LC1212 MK IV 2.5 KW NT LASER CUTTING MACHINE MACHINE CAPACITY 1270 X 1270 2540 WITH ONE REPOSITION

Condition: used, Spare parts for Amada LC 3015 X1 NT. Laser resonator with many new parts. Control unit with display. Axis motors. Cutting head. Gusdpfj Ahnwujx Ai Tji Mirrors. Light barriers.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,650 h, control type: CNC control, laser hours: 8,650 h, laser power: 2,000 W, AMADA CNC Fiber Laser LCG-3015 AJ 2 kW Fiber skid table CT no.: 84561000 / Japan / no preferential origin AMNC Multi Media controller 2000 watt laser power AJ fiber laser Principle: flying optic 3-axis direct drive (X/Y/Z) oil shot function Including sensor cutting head Including lens quick-change system Including cutting lens 150, 190, 190 AX mm Including NC gas control Including NC focus control Including clean cut, high-pressure cutting Including aluminum cut function Including air purge system Including safety according to CE Including shuttle table PCLCG3015 Year of manufacture 04/2014 Gujdpfxeycf N Ie Ai Tji

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 441 h, machine/vehicle number: LCG3015AJ, laser hours: 228 h, laser power: 2,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 2 mm, table length: 3,070 mm, table width: 1,550 mm, travel distance Z-axis: 100 mm, type of cooling: water, compressed air connection: 6 bar, overall weight: 9,300 kg, total length: 10,136 mm, total width: 2,840 mm, total height: 2,432 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, The machine is in as-new condition. It is connected to power; test cuts are possible. Nozzle changer: 8 stations. Gsdpfx Ajx Tft Aei Tjui

Year of construction: 2010, condition: ready for operation (used), A CNC laser cutting machine Amada is available. Laser type: CO2, laser power: 4kW, connected load: 43kVA, max. sheet dimensions: 1500mm/3000mm, max. sheet thickness steel/stainless steel: 10mm/12mm, control system: Fanuc, power-on hours: 34401h, operating hours: 21713h, cutting hours: 11111h. Including loader and unloader. Documentation available. An on-site inspection is possible. Godpfx Aiozkldye Tsui

Condition: used, Year of construction: 2013, laser capacity in Watt 3500 travel -x axis 3070 mm travel -y axis 1550 mm Control AMNC-F table load capacity 920 KG material length max. 3050 mm material width max. 1525 mm total power requirement 30 kW Gedpfxsv Nq Rgs Ai Teui weight of the machine ca. 8,2 t dimensions of the machine ca. 10,00 x 2,90 x 2,20 m

Condition: repair required (used), functionality: limited functionality, Year of construction: 2007, operating hours: 31,489 h, control type: NC control, degree of automation: semi-automatic, laser type: CO₂ laser, laser hours: 22,804 h, laser power: 4,000 W, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 3,000 mm, AMADA LC3015 X1 NT – Complete Automated Laser Cutting Cell Godpozi Uc Nsfx Ai Tsui -The AMADA LC3015 X1 NT is a fully automated CNC laser cutting cell designed for efficient, high-volume sheet metal production with minimal operator intervention. -The installation includes the AMADA LC3015 X1 NT laser machine, an AS LUL 300 X1 automated tower system, a 4 kW Mitsubishi ML40CFX CO₂ resonator, a Riedel industrial chiller, and a Donaldson Torit extraction and filtration system. -Manufactured in Japan in 2007, the machine offers a working area of 3,000 × 1,500 mm and delivers reliable, precision laser cutting performance. -The 4 kW laser is capable of cutting mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. -The automated tower system features eight storage cassettes with a load capacity of 3,000 kg each, enabling automatic material loading, unloading, and pallet exchange for continuous production. -A vacuum sheet handling system further improves productivity by reducing manual material handling. -The Riedel dual-circuit chiller provides efficient cooling for both the laser source and optical components, ensuring stable operation. -The Donaldson Torit filtration system effectively removes fumes and metal particles generated during the cutting process, maintaining a clean and safe working environment. -This complete AMADA/Mitsubishi solution combines automation, reliability, productivity, and integrated cooling and filtration systems, making it an excellent choice for demanding industrial manufacturing applications.

Year of construction: 2013, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 3270 mm Y-AXIS TRAVEL: 1550 mm Z-AXIS TRAVEL: 100 mm Guodjvhc S Hjpfx Ai Tei WORKING AREA: 3070 x 1550 mm ADMITTED LOAD ON TABLE: 920 Kg SOURCE: AJ2000 Fiber ; 2000 W CONTROL UNIT: AMADA AMNC3i WEIGHT: 11200 Kg OVERALL DIMENSIONS: 10028 x 2900 x 2000 mm NOTE: WITH LOADING/UNLOADING SYSTEM LKI mod.LST3015FLC-AJ YOM 2013; AUTOMATIC NOZZLE CHANGE

Condition: ready for operation (used), Year of construction: 2016, laser power: 2,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, table load: 920 kg, number of axes: 3, This 3-axis AMADA LCG 3015 AJ fiber laser cutting machine was manufactured in 2016. It features a maximum continuous laser power of 2,000 Watts and an impressive X-axis travel of 3,070 mm. The machine includes an automatic palletizing system and a lightweight HS cutting head with advanced safety measures. If you are looking to get high-quality cutting capabilities, consider the AMADA LCG 3015 AJ machine we have for sale. Contact us for further details. • CNC control: AMADA AMNC-F with 15" touchscreen, 1 MB memory • Control features: Auto-diagnostic system, laser power feedback control, USB/Ethernet ports, CD drive, LAN interface, cutting data library database, part/sheet counting, logical search function, production time measurement • Max material thickness: • Mild steel (ST 1203): 10 mm • Stainless steel: 10 mm • Aluminum (AlMg3): 8 mm • Copper: 4 mm • Brass: 5 mm • Cutting speed: 0–120 m/min • Machine weight (with interchangeable table): 8,200 kg • Cutting head: Lightweight HS head with capacitive sensor for constant distance, rapid-change lens/nozzle system, 5 protective safety measures • NC focusing function: Automatic focus adjustment via CNC and optics for varying materials/thicknesses • Positioning diode laser: Assists in approaching positions and working with residual sheets/trimmings Additional equipment Guodpfx Ajz S Nfcei Tsi • Pallet changer: Automatic palletizing system with pneumatic thin-sheet clamping and roller table for easy positioning • Extraction and chiller: Multi-chamber extraction with self-cleaning filters; closed-loop cooling unit for laser, focusing mirror, lens, and drives

Condition: used, Year of construction: 2003, table length 5040 mm table width 1550 mm 12 mm plate weight max. 330 kg travel -x axis 2520 mm travel -z axis 300 mm travel -y axis 1550 mm cutting speed 20 m/min feed speed X/Y/Z 80/80/60 m/min positioning accuracy +-0,01 mm/500 mm mm repeatability +/- 0,005 mm table height 820 mm size of opening 550x1550 mm compressed air 6/20 bar total power requirement 10 kW weight of the machine ca. ca. 6,5 t dimensions of the machine ca. 2,5x5,7x2,3 m Turbo blower replaced at 36,000 hours Compressed air dryer Alphapac 0015 SP Basement flue gas extraction type Vario T 1.5A Air conditioning unit RIEDEL PC 315.21-NE-LAS Laser radiation within class 1 The machine was regularly serviced Guedovxwytjpfx Ai Toi

Condition: like new (used), Year of construction: 2019, AMADA - LCG3015AJ – 2019, like new Gedsiv S Nqjpfx Ai Toui - Control system: AMADA - Fiber laser, 2100 W - Table size: 3000 x 1500 mm (x2) - Operating time: 300 hours - Documentation available - Weight: 9400 kg - Operational Due to excessive administrative overhead (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 10,600 h, machine/vehicle number: HFEM21703K100114, distance between stands: 2,700 mm, table height: 960 mm, oil tank capacity: 235 l, overall weight: 11,910 kg, total length: 3,980 mm, total width: 2,075 mm, total height: 2,900 mm, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, angle measuring system, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, We are offering this very good Amada HFE-M2-1703 press brake, manufactured in 2011. Manufacturer: Amada Godpo Af Naqjfx Ai Tsui Model: HFE-M2-1703 Year of manufacture: 2011 Machine type: Press brake Condition: Very good Machine was used in one shift small production, serviced regularly by local dealer. In price is included complete list of toolings. Machine is possible see in action until 31.01.2027, after this date will be stocked dismantled. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details cutting diameter 1000 mm saw band length 11100 mm cutting width 1100 mm total power requirement 20 kVA weight of the machine ca. 14,5 t dimensions of the machine ca. 5,4 x 3,2 x 3,9 m Additional information AMADA BAND SAW MACHINE MODEL HFA-1000 C II A versatile, robust, fully automatic CNC-controlled machine for cutting solid material, shaped steel, steel bars, and tubes. Thanks to the CNC control system, the optimal saw feed rate is automatically set after entering the material dimensions and selecting the appropriate material. Both bimetal and carbide saw bands can be used. Cutting capacity: Gjdpfx Aio Akby Re Tsui Ø 1000 mm, W 1100 x H 1000 mm min. Ø 400 mm, W 400 x 100 mm Hydraulic band saw tensioning (with band breakage and slippage monitoring) Face parallelism monitoring Motor power – band drive: 11.0 kW Hydraulics: 3.7 kW Coolant: 0.36 kW Cleaning brush: 0.09 kW Band speed: 15 – 120 m/min (infinitely variable) Tank capacity: 115 l (hydraulics) 250 l (coolant) Saw band dimensions: 80 x 1.6 x 11,100 mm Space requirements: Length 5.420 x Width 3.215 x Height 3.924 mm Table height: 820 mm Weight: 14,500 kg – no foundation required Roller type conveyor 1000 x 1200 x 500 mm high

Condition: good (used), Year of construction: 2006, operating hours: 47,962 h, functionality: fully functional, type of input current: three-phase, overall weight: 18,000 kg, input current: 40 A, input frequency: 55 Hz, input voltage: 380 V, Equipment: safety light barrier, We are selling: a well-maintained Amada punching and nibbling machine, used only for thin sheet metal applications. Maintenance was performed by AMADA. Without tooling. Gujdpfoz R Atqox Ai Tsi The machine is being sold due to a new investment. The buyer must dismantle and collect the machine in DE-84051 Mettenbach. The machine can be inspected in operational condition in DE-84051 Mettenbach by appointment. Sale only to commercial customers and with the exclusion of any warranty!

Condition: used, functionality: fully functional, Year of construction: 2014, machine/vehicle number: 125, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: FANUC, laser source model: AF4000i-C, laser power: 4,000 W, overall weight: 9,500 kg, AMADA FO MII 3015 NT CO2 laser cutting machine, manufactured 03/2014, with 4 kW FANUC AF4000i-C laser source. The machine is operational and has been used for cutting by the seller. Operating and cutting hours are being checked and will be added. IMPORTANT: The tower storage / automatic material handling system was dismantled in summer 2026. The machine has no pallet changer. To move the cutting table outside the machine manually, suitable rails would need to be designed and built. This rail system is not currently installed. A computer with installed AMADA Dr.ABE nesting/programming software, version 2.15.04, and its software licence is included. Machine nameplate: serial number 125; weight 9,500 kg. Guodpez Tdc Sofx Ai Toi The dismantled tower is stored outdoors. Any sale of the tower and its condition/completeness must be agreed separately. It is not part of the advertised machine configuration. Asking price: EUR 20,000 net, plus applicable VAT. Further information on hours, maintenance history, accessories included, inspection and collection arrangements will be added.

Condition: good (used), functionality: fully functional, Year of construction: 2006, stroke length: 200 mm, overall weight: 11,600 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 2,850 mm, input voltage: 400 V, pressing force: 170 t, clearance between the columns: 2,700 mm, distance table to ram: 350 mm, table length: 3,100 mm, type of input current: three-phase, Equipment: documentation/manual, safety light barrier, Amada HFP 170/3 CNC press brake | 2006 | AMNC-PC | Wila clamping system Machine specifications Manufacturer: Amada Model: HFP 170/3 Year of manufacture: 2006 Condition: used, in good working order Control system: Amada AMNC-PC Guedpfx Asz S Nuqei Tei Tool clamping system: Wila Included: 1 set of tools Dimensions: approximately 4,500 × 2,000 × 2,850 mm Machine weight: approximately 11,500 kg Location: Waanrode, Belgium Description Amada HFP 170/3 CNC press brake from 2006, equipped with AMNC-PC control and a Wila tool clamping system. The machine is used but still in good working order. One set of tools is included with the sale. The machine is being sold due to the purchase of a larger press brake. Transportation can be arranged upon consultation. The machine is stored in Liège but can be inspected while powered on.