Used Masturn 50 Cnc for sale (39,248)

Year of construction: 2002, condition: excellent (used), Technical data: working width: 3550 mm max. bending capacity: 42,0 mm max. bending: 35,0 mm CNC control diameter upper roller: 480 mm diameter 2nd top roller: 540 mm diameter lateral side rollers: 480 mm diameter middle bottom roller: 480 mm conical bending device by inclination of the two side rollers mobile control panel with digital display hydraulic folding bearings own weight: approx. 44 tons additional equipment: lateral bending aid Hnsdpfx Asittzfsgcok swiveling bending aid on top additional top roller The seller is not liable for writing or data transmission errors. The machine is in appearance, technique and wear according to the age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Hnodpfxsyahv Ss Agcek Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Hnedpjhqnl Tsfx Agcjk Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor Hnjdpsd Ab Uuefx Agcok With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: excellent (used), Swift L6500 x 3000mm CNC Roll Lathe Fanuc 18iTB Control, 700mm Swing Hedpfxew U Ul As Agcjnk 3000mm Between Centres, 600mm 3 Jaw Chuck, Tailstock, Conveyor

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Hnedexc In Sepfx Agcsk Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control

Condition: used, Year of construction: 2001, punching force: 2,800 t, total length: 2,500 mm, sheet thickness (max.): 8 mm, overall weight: 11,500 kg, table length: 1,250 mm, Offered for sale. Nice Boschert punching nibbling machine. Comes with a large selection of tools. Hedpfxoyiz I Te Agcenk

Condition: used, Year of construction: 1995, Technical details: grinding length: 1250 mm grinding width: 600 mm workpiece height: 730 mm table surface area: 1720 x 500 mm headstock: dist. table - spindle center: 900 mm max. longitudinal movement: X-1450 feed range: 10 - 20.000 mm/min Hnedpfex Uzvpox Agcek vertical movement: Y-730 mm feed range: 0,2 - 3.000 mm/min cross travel: Z-550 mm feed range: 5 - 5.000 mm/min power capacity: 1500 U/min.- 44 kW / 8000 U/min. - 38 kW kW grinding wheel turining speeds: 50-6.000 U/min cutting speed: max. 80 m/sec. weight of the machine ca.: 11 t with CNC SIEMENS 840 C auto. dynamic balncing system integrated in the grinding conus profile grinding unit ( on table mounted ) Diamant profile rollers ( dia. max 140 mm , width max. 200 mm, hole 52 H3 ) speed 3000 rpm two magnetic plates ( 1000 x 400 mm, 1200 x 350 mm ) divers Flanges ect. *

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 87'2294, functionality: fully functional, throat depth: 255 mm, controller model: Cybelec S-DNC-8879-PS, bending force (max.): 81 t, working length: 2,050 mm, TECHNICAL DETAILS Hnedpfx Agoyhn H Hscsk Pressing force: 800 kN Working length: 2,050 mm Clearance between uprights: 2,050 mm Frame throat depth: 255 mm Ram stroke, working stroke: 215 mm Max. installation height: 390 mm Powered backgauge: 500 mm Working speed, pressing: 8 mm/s Working speed, return: 60 mm/s MACHINE DETAILS Control: Cybelec S-DNC-8879-PS Connection: 50 Hz 3x 380 V Motor power: 6 kW Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,000 x 3,400 mm Machine weight: 6,700 kg EQUIPMENT Set of bending rails Set of gooseneck rails

Condition: as good as new (ex-display), The Numturn 500/1500 FA is a precision CNC Flat Bed Lathe designed for a wide range of applications, making it an excellent choice for the CNC Flat Bed Lathes category. With a robust construction featuring heavy ribbing of the machine frame and wide hardened V-guides, this lathe is engineered for heavy-duty machining. The Fagor 8055i control enhances your workshop programming experience, while the automatic 8-station servo-driven tool turret significantly increases productivity and flexibility for both single part and small batch production of larger workpieces. Its hydraulic power chuck offers adjustable holding force, and the heavy-duty tailstock provides high clamping force for secure machining. The completely lockable enclosure and smart central lubrication system contribute to a low-maintenance operation, allowing for more efficient workflows. KNUTH leads the way in reliability and performance, so if you're looking for a CNC Flat Bed Lathe that delivers robust construction and precise functionalities, you can request a quote today. Hnedpjm E Ty Nsfx Agcjk

Condition: ready for operation (used), Year of construction: 1983, operating hours: 6,348 h, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, drill diameter: 50 mm, The machine was overhauled in 2009! TECHNICAL DETAILS Drilling depth: 1,500 mm Drill diameter: 5 - 50 mm Travel X-axis: 1,250 mm Travel Y-axis: 900 mm Travel Z-axis: 900 mm Table length: 1,000 mm Table width: 1,000 mm Max. table load: 3,000 kg Spindle speed: 100 - 6,000 rpm Spindle taper: SK 40 MACHINE DETAILS Control: Siemens 802 D Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,600 x 2,000 mm Weight: 6,000 kg Operating hours: 6,348 h Hnodpfxoyfhcio Agcjk

Condition: good (used), Year of construction: 2009, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, stroke length: 250 mm, operating speed: 100 mm/s, reverse speed: 90 mm/s, table height: 900 mm, throat depth: 400 mm, total length: 4,550 mm, total width: 2,350 mm, total height: 2,950 mm, overall weight: 15,000 kg, controller manufacturer: CYBELEC, controller model: MODEVA 10S, working width: 3,100 mm, bending force (max.): 250 t, distance between stands: 2,550 mm, installation height: 517 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 6, type of crowning: CNC-controlled, Technical data NEW INTERMEDIARIES/PUNCHES/DIES. Hnodpjymyffofx Agcsk Protective laser Crowning table with CNC CNC CYBELEC MODEVA 10S CNC axes: Y1/Y2/X/R Manual axes: Z1/Z2 Year: 2009 FREESTANDING MACHINE

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 700 mm, turning length: 5,500 mm, turning diameter: 1,000 mm, spindle bore: 105 mm, spindle speed (max.): 1,000 rpm, GURUTZPE AT 600 PLUS LATHE WITH GROUND BED, AUTOMATIC TURRET, AND NEW FAGOR 8058 CNC Hnodpfeyivadjx Agcek

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: fortlaufend, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 15 m/min, feed length X-axis: 500 mm, feed length Y-axis: 300 mm, feed length Z-axis: 400 mm, controller manufacturer: GSK, controller model: 218MC, total height: 2,450 mm, total length: 1,620 mm, total width: 2,050 mm, table width: 240 mm, table length: 800 mm, table load: 100 kg, overall weight: 2,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 1 bar, distance table to spindle center: 320 mm, spindle motor power: 3,700 W, number of spindles: 1, number of slots in tool magazine: 12, tool length: 250 mm, tool diameter: 104 mm, tool weight: 8 g, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Table size: 800x240 mm Spindle speed: 0-6000 rpm Drilling capacity in cast iron: 40 mm Drilling capacity in steel: 32 mm Longitudinal travel (X): 500 mm Cross travel (Y): 300 mm Vertical travel (Z): 400 mm Max. distance spindle nose - table: 450 mm Tool holder: BT 30 Quill diameter: 120 mm Rapid traverse X+Y axes: 20 m/min Rapid traverse Z axis: 15 m/min Number/size/spacing of T-slots: 3x14x80 mm Arm reach: 320 mm Tool stations: 12 Max. tool diameter: 104/205 mm Max. tool length: 250 mm Max. tool weight: 8 kg Motor power: 3.7 kW, 400 Volt Max. table load: 100 kg Weight: 500.00 kg Dimensions: 1620x20500x2450 mm Hodeyla Nnepfx Agconk

Year of construction: 2002, condition: refurbished (used), I offer on behalf of a customer and on his account a VOUMARD 150 CNC L 1300 for sale. The machine is equipped with: 4-fold turret 3 x inside, 1x empty space for outside pneumatic swivelling dresser diameter max 350 mm length max 1.300 mm Hsdpfxjgigv De Agcsnk CNC Fanuc 32 i very extensive accessories among others several hydr. steady rests, power chucks etc. View under "Documents Machine can be inspected under power at the owner's premises. The machine was overhauled in 2016 In addition, I offer 2 pieces of grinding spindles Voumard VMX 90 A, once new, once reconditioned. The can also be purchased seoerat

Condition: ready for operation (used), Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible. Hedpfxjylzhrs Agconk

Condition: as good as new (ex-display), The Numturn S 560/1500 is a state-of-the-art CNC Flat Bed Lathe designed for the Lathes category, offering high performance for large workpieces. This machine boasts a robust box-way design that ensures maximum precision while facilitating heavy machining tasks. Its powerful Siemens servo motor drives the main spindle through a 4-step transmission, allowing for infinitely variable spindle speeds and high torque across various speeds. Equipped with an 8-station VDI tool changer, the Numturn S 560/1500 maximizes productivity and flexibility in operations. The user-friendly Siemens 828D control enables quick setup through two electronic hand-wheels, resembling manual lathe operation for enhanced user experience. With a hydraulic tailstock featuring high clamping force and a reliable automatic central lubrication system, maintenance is efficient and straightforward. For those looking to enhance their productivity, the Numturn S 560/1500 represents an excellent solution in CNC Flat Bed Lathes. To learn more about this machine or to request a quote, don’t hesitate to contact us. Hnsdpfxeuyg Erj Agcek

Condition: as good as new (ex-display), Year of construction: 2022, Stierli Radial 2500 CNC bending machine Radial bending machine with large rotary table for bends up to 360°. Bending power 2500 Nm Bending capacity flat steel 60x15 mm S235 Bending capacity round steel ø30 mm S2353 turntable ø : 390 or 550mm Pre-feed machine year 2022 incl. hand- and foot pedal Machine as new Works like a classic hand bender, but driven, very precise and programmable. Incl. stop manual or programmable CNC stop 1, 2 or 3m. The bending angles as well as the stop positions are digitally programmable and can be stored in bending programs. Hjdegqfp Hjpfx Agcenk The standard tooling is made by simple bending pins. A driver bends the material around these bending pins. These tools can also be manufactured very easily by the customer. In addition to the standard bending bolts, we (or our customers themselves) also manufacture tools for other sections. Possible are sheet metal bending, flat steel, round steel, various profiles, frames etc.. Bending jaws can also be screwed on, which allows bending of very small radii. (similar to a hand bending machine) This machine solves your bending tasks!

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2508-CNC Delem DA-58T Specifications - Maximum bending thickness (S235): up to 4.0 mm - Nominal bending force: 800 kN - Maximum bending length: 2500 mm - Throat depth: 250 mm - Maximum stroke: 120 mm - Daylight: 385 mm - Distance between side frames: 2000 mm - Backgauge travel distance: 600 mm - Motor power output: 5.5 kW - Approaching speed: 0 kW - Length: 2600 mm - Width: 1450 mm - Height: 2300 mm - Weight: 4800.0 kg Tools - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram drive (travel along the Y-axis): servo motor - Backgauge fingers positioning (R-axis): manual - Punch quick change tooling system form AMADA DA-58T control - One-click program generation - Advanced operator support based on algorithms - Advanced graphic simulation of bending sequences - Included prompts for the operator - Algorithms to shorten the production process - Automatic crowning calculation - High-resolution TFT touchscreen - USB interface Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Steel hydraulic line tubings Hydraulic lines made of steel instead of rubber reduce the risk of future leaks. Hsdpfeiumyzox Agcsnk Ergonomics The operator can work freely throughout the machine's working area thanks to the mobile foot switch and the controller on the swivel arm. Additional LED lighting ensures a comfortable view of the workpieces in any situation. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Oil cooling system The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, CNC lathe machine TCK 50A500 with slant bed, 12 positions turret, hydraulic chuck and tail-stock, chip conveyor, parts catcher - is perfect machine for your turning operations. You can choose it in standard set or add desired option. We can make it with GSK CNC system, Siemens or Fanuc as option Max. Swing over bed -560mm Max. Swing over bed -260mm Max. disc machining diameter - 400mm Max. turning length - 500mm Spindle end type A2-6 Spindle through hole diameter -66mm Bar diameter -55mm Hydraulic chuck -10 inches Spindle limit speed -3000rpm Tail-stock sleeve diameter -70mm Tail-stock sleeve inner hole taper Mohs 5# Hnjdpet Ef I Uefx Agcek Tail-stock sleeve stroke -80mm Knife square size -25mm Main motor power -11kW Machine net weight -3000 kg Dimensions (L×W×H) - 2700*2000*2000 mm Please contact us for more details. There are other CNC slant bed lathe machine, CNC flat bed lathe, milling machines,8 CNC milling machines, CNC turning and milling centers, band saws, CNC saws available per request

Year of construction: 1995, condition: ready for operation (used), A CNC surface grinding machine Jung, overhauled in 2003, is available. Grinding length: 500mm, grinding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm, speed: 4200rpm, weight: approx. 2500kg, operating hours: approx. 16602h. Documentation available. An on-site inspection is possible. Hnsdpfx Agsw H Attjcsk

Year of construction: 1994, condition: ready for operation (used), Grinding length: 650mm, center height: 125mm, grinding wheel dimensions X/Y/Z: 406mm/60mm/127mm, peripheral speed: 45m/s, spindle power: 4kW, travel X/Z: 210mm/810mm, feed rate: 8m/min, table swivel: 8°, speed: 5000rpm, tool spindle head swivel: -30°/90°. Machine dimensions X/Y/Z: approx. 3600mm/2850mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik. The X-axis spindle and the scale were renewed. Including Movomatic measuring system and accessories. Documentation available. On-site inspection is possible. Hedeyf I Hbjpfx Agconk

Year of construction: 1994, condition: ready for operation (used), Sanding length: 500mm, sanding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, sanding wheel diameter: 225mm, sanding wheel width: 25mm, sanding wheel bore: 51mm, speed: 4200rpm, machine weight: approx. 2500kg. On-site inspection is possible. Hnsdpfxev Exrqo Agcsk

Year of construction: 2012, condition: ready for operation (used), A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible. Hnedpfx Agsu Nlk Sjcok

Year of construction: 1996, condition: ready for operation (used), Sanding length: 650mm, max. sanding diameter: 508mm, center height: 125mm, workhead speed: 1500rpm, max. workpiece weight: 30kg, workpiece swivel range: 30°-90°, tailstock: MK3. Grinding wheel diameter: 508mm, grinding wheel width: 40mm, bore: 203mm, max. internal grinding diameter: 150mm. Machine dimensions X/Y/Z: approx. 4300mm/3100mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik 820G. Documentation available. On-site inspection is possible. Expected to be available from February/March 2025. Hjdsuku Smjpfx Agcsnk