Used Machining Centres Smallest for sale (65,603)

Condition: used, machine/vehicle number: 008176, X axis working area: 3050 mm Y axis working area: 1250 mm Main Electrospindle power: 10 KW Dsdpfx Aco Ahwxzeyswd Number of controlled axes: 3 axes Total number of drilling spindles: 25 Total number of tool changer positions: 4

Condition: good (used), Year of construction: 2012, Ref. -No.: 10680 Dodpfxo Ahmwks Acyswd Manufacturer: TOYODA Type: FH 1250 SX Year of construction: 2012 Type of control: CNC Control: FANUC Series 310i-A Storage location: Halberstadt Country of origin: Japan Serial no.: NS 22XX X-Travel: 2200 mm Y-Travel: 1600 mm Z-Travel: 1850 mm Table Dimensions (Lengthxwidth): 1250 x 1250 mm Table Load: 2500 (zu bestätigen) kg Tool Taper: SK 50 Numbers Of Tools In Magazin: 128 (zu bestätigen) Turning Speeds: 20 - 6000 RPM Dimensions Of The Machine Ca.: 10500 x 6300 x 5000 (Platzbedarf) mm m Numbers Of Pallets: 2 Operating hours: 1833 H Further information: TOYODA FH 1250 SX – 1,833 operating hours Horizontal 4-axis machining centre with 2 pallets 1,250 x 1,250 mm and large tool magazine. Control: FANUC Series 310i-A Working range / travels - X-axis: 2,200 mm - Y-axis: 1,600 mm - Z-axis: 1,850 mm - 4th axis: rotary table (B-axis) - Feed X/Y/Z: 1 – 2,100 mm/min (stated as rapid traverse by seller, to be confirmed) Pallets / table - 2 pallets with automatic pallet changer - Pallet size: 1,250 x 1,250 mm (tapped holes, standard version) - Max. pallet swing diameter: Ø 1,600 mm - Max. load fixture + workpiece: 2,500 kg (according to manual, to be confirmed) Spindle - Tool taper: SK 50 - Speed: 20 – 6,000 rpm Tool system - Chain magazine with 128 pockets (120 stated elsewhere, to be confirmed) - Automatic tool changer - Tool length measurement Equipment - Chip conveyor / coolant system KNOLL - Hydraulic unit - Electronic handwheel - Set-up station with pallet station - Tooling manual (JTEKT) available Floor space: approx. 10.5 x 6.3 x 5.0 m (L x W x H) Data according to seller's description, subject to technical changes and errors.

Condition: used, Year of construction: 2020, CMS Athena 3015 5 Axis Machining Centre with OSAI Control. (2020) Traverses X Y Z; 3200 x 1500 x 900mm, B Axis -/+ 120 degrees, C Axis -/+ 370 degrees, Spindle Power 15Kw, Spindle Speed 24,000rpm, 8 Station Tool Change, Tool Size HSK63F. S/No. 9985, Machine Dimensions: 5800 x 2700 x 3350mm, Machine Weight: 7700kg Location: These lots are located in Leicester, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Dsdpe Ah Evbsfx Acyowd

Condition: used, Year of construction: 2013, controller manufacturer: Sonstige, controller model: Andronic 3060, _____ Description: Year of manuf. : 2013 Control : Sonstige Andronic 3060 Speed : 42000 rpm Movement X/Y/Z : 550/400/400 mm Tool holder : HSK-E40 Spindle: Technology:Motorspindle Speed:42.000 rpm Power:17kW Taper:HSK-E40 NC-Swivelroundtable: Technology:Integrated 4./5.-Axis B-Axis:-/+ 110° C-Axis:360° Workpiecedimensions (max.):ø400 x 380 mm Workpieceweigth (max.):250 kg Palletclampingsystem:Parotec Partool clamping chuck In general: Dsdpfx Acj Ail Nleyowd Toolmagazine:32 stations Rapid travers in X/Y/Z:30 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Y/Z Workpiecemeasurement:Touch probe, Renishaw OMP400 Toolmeasurement:Laser, BLUM Extraction:Graphiteextraction, Keller L-Cut Coolingmanagement I:Minimum lubrication Coolingmanagement II:Blow air through spindle Setup operations:Electronic handwheel Further Equipment:Spindlechiller Further Accessory:Misc. Pallets and electrode holders

Condition: excellent (used), Year of construction: 2008, The condition of the machine is excellent, it has performed only 14078 operations. CNC controlled machine, designed for processing welded frames. Multiple use of the same time He works in a welding and cleaning line It does not take up additional space in the hall It can work in the line of frames, sashes or mixed All operations are performed during cooling: dehydration vents, grooves venting, holes in colored profiles drilling the frame for the post connector drilling holes for the hinge in door frames (x6) drilling holes for the hinge in the leaf (x2) The center has its own transport of frames from the welder to the cleaner Dwjdpfx Acem Ak R Usyod PLC control, NC User-friendly visualization

Condition: ready for operation (used), Year of construction: 2017, - USED - 3-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE       X-AXIS TRAVEL: 2500 mm Y-AXIS TRAVEL: 1800 mm Djdpfezlu S Aox Acyowd Z-AXIS TRAVEL: 800 mm DISTANCE SPINDLE NOSE-TABLE: 250 - 1050 mm RAPID FEEDS X-Y-Z: 20 m/min SPINDLE: 10000 rpm; 24,5 - 63 kW; 117-300 Nm; ISO 50 - DIN TABLE SIZE: 2800 x 1700 mm MAX ADMITTED LOAD: 8000 Kg HIGH PRESSURE COOLANT: INCLUDED TOOL MAGAZINE: CHAIN-TYPE ; 60 POS MAX TOOL DIAMETER: 130 mm MAX TOOL LENGHT: 350 mm MAX TOOL WEIGHT: 15 Kg CONTROL UNIT: HEIDENHAIN TNC 640 WEIGHT: 29500 Kg OVERALL DIMENSIONS: 4200 x 7100 x 4500 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; TOOL SETTER ; LINEAR SCALES ; PORTABLE HANDWHEEL ; EXHAUST SYSTEM ; TOUCH PROBE NOTE: COMPLETO DI N.54 CONI ISO50

Condition: used, machine/vehicle number: 008562, X axis working area: 2465 mm Y axis working area: 1260 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Dedpfx Acezvwiljyewd Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 16

Condition: used, Year of construction: 2017, operating hours: 38,141 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: Mazatrol, controller model: Smooth G, total height: 2,810 mm, total length: 3,650 mm, total width: 3,100 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 6,800 kg, spindle speed (min.): 12,000 rpm, spindle speed (max.): 35 rpm, operating hours of spindle: 8,074 h, coolant supply: 30 bar, number of slots in tool magazine: 30, input voltage: 19 V, Equipment: chip conveyor, documentation/manual, CNC Vertical Machining Centre CNC Control: Mazatrol Smooth G Machine tablesize: 1300 x 550 mm X-axis travel: 1050 mm Dsdpfezy Nxgex Acyewd Y-axis travel: 530 mm Z-axis travel: 510 mm Spindle speed: 35 - 12.000 rpm Spindle: SK40/DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor belt right - Cooling by the spindle 15 bar - Spindle total time 8.074 hours If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), HERMLE C 42 U is a 2 x 5‑axis machining centres with loading robot, engineered for high precision and reliability. Table 400×400 mm, table load 450 kg, travels X800 Y800 Z550 mm, A ±130°. Spindle HSK‑A63 0–18,000 rpm, 42 kW, 148 Nm; rapid 45/45/40 m/min. Tool magazines 42+160, 54 pallets, KUKA robot, coolant 80 bar, Renishaw/BLUM. Suited for tight tolerances in automotive, aerospace, watchmaking, medical. Dwsdpfx Asyxn Dnecysd

Condition: good (used), Year of construction: 2013, Ref. -No.: 10718 Manufacturer: REIDEN Type: RX 10 Year of construction: 2013 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 40-xxx Turning Speeds: 16.000 RPM X stroke: 1.000 mm Y stroke: 1.100 mm Z - stroke: 810 mm C-Axis: 360° Spindle power: 38 kW Tool Taper: HSK 63 Max. Rapid traverse: 60 m / min Further information: The machine is offered including all available accessories and technical documentation. Dwodpfj Ahw Siex Acyed The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Condition: used, Year of construction: 2008, 3650 x 1560mm Matrix Table 4455mm x axis stroke [for routing] 1930mm y axis stroke [for routing] 250mm z axis stroke 150mm Max panel clearance X / Y Axes vectorial speeds 43m/min Z axis speed 15m/min Power 2000 Routing Unit 9 / 10hp for HSK63F toolholders. Speeds from 12000 to 18000rpm 250m3 / hr vacuum pump Telesolve long distance remote diagnostic system Fitted with following options Interpolating Z axis Centralised dust extraction system Pre-setting for angle driven heads TR10 Fixed 10 position toolchanger [ mounted on side of table ] R8 Rapid 8 position rotary toolchanger [ mounted on operating unit support beam ] 2 x Electronic detecting systems for panel height and tool length 3 x Additional rear stops Automatic centralised lubrication "PC Office" Console for easy movement around machine. Including Windows XP operating system 15" Colour monitor Keyboard CD Rom drive 40 Gbyte hard disk Dwedpozd Utwefx Acyed 128MB Ram Serial nr - AA2 / 000268? Year - 2008 CE Compliant Condition - Good

Condition: used, The EMMEGI PHANTOMATIC T4 A is a 3-axis CNC machining centre, manufactured in 2005, designed for milling, drilling, slotting and tapping operations on aluminium, PVC and light alloy profiles. The machine is equipped with a 3-axis CNC control system (X, Y, Z), a high-speed electrospindle and an automatic tool magazine with 5 + 1 positions, allowing automatic tool changes during the machining cycle. It also features a dual-output angle head for horizontal and lateral machining operations, providing greater flexibility when processing profiles. The worktable is equipped with 4 automatically positioned pneumatic clamps for secure clamping and accurate positioning of the profiles. Main Technical Specifications CNC control: 3 controlled axes (X, Y, Z) Tool magazine: Automatic Djdpfo Agv A Rjx Acyswd Angle head: Dual-output angle head for horizontal machining operations Pneumatic clamps: 4 Clamp positioning: Automatic Installed power: 7.5 kW Power supply: 400 V, three-phase, 50 Hz Machine weight: 1,950 kg Year of manufacture: 2005 CE marking: Present

Condition: used, Year of construction: 2023, Felder Format 4 Profit H80 21.31 Machining Centre. Serial No TBA (2023), F4 Integrate Control, Working Area 3090 x 2100 x 85mm, Travel X/Y/Z = 3860/3500/225mm, 500m3/h Vacuum Table, Main Spindle 10kW, HSK F63 at 1000 – 24000rpm, 15 Position Toolchanger, Length Measurement Tool, Hand Held Remote Control, Loading/Unloading Tables, Upper Table Extraction, Light Guards Dsdpfx Aco Ah Etyeyswd Location: This lot is located in Gateshead, Tyne & Wear, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lot 1 of Auction 3516

Condition: used, Year of construction: 2020, CNC machining center Manufacturer: Format4 Type: Profit H08 21.31P Year of manufacture: 2020 Dwedpfx Aj Af E Nvecysd Technical data - Operating hours: Less than 500 hours - Working area: X 3,090 mm / Y 2,100 mm / Z 85 mm - Main spindle (3 axes): 10 - 12 kW, depending on the original configuration - Spindle speed: 1,000 - 24,000 rpm - Tool holder: HSK-F63 - Automatic tool changer: Linear tool magazine with 15 positions - Drilling unit: Vertical drilling head DH 8 with 8 independent spindles Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: used, EMMEGI PHANTOMATIC M4L 4-axis CNC machining centre, manufactured in 2022, designed for machining aluminium, PVC and light alloy profiles. The machine is equipped with a high-speed electrospindle featuring an HSK-F50 tool holder, automatic A-axis rotation and a double tool magazine, making it ideal for milling, drilling, slotting, end milling and machining operations on multiple sides of the profile. MACHINE DETAILS Manufacturer: EMMEGI S.p.A. – Italy Model: PHANTOMATIC M4L Year of manufacture: 2022 Machine type: 4-axis CNC machining centre Certification: CE with original Declaration of Conformity TECHNICAL SPECIFICATIONS Axis Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 274 mm Z-axis (vertical): 390 mm A-axis: automatic rotation from 0° to 180° Positioning Speeds X-axis: 56 m/min Dwedo Afnl Tspfx Acysd Y-axis: 22 m/min Z-axis: 22 m/min X/Y/Z axis acceleration: 3.3 m/s² Electrospindle Power: 4 kW (S1 continuous duty) Maximum speed: 20,000 rpm Tool holder interface: HSK-F50 Liquid cooling system Automatic A-axis rotation: 0°–180° A-axis rotation speed: 6,600°/min Machining Capacity X-axis longitudinal travel: 3,000 mm Usable working length with tool magazine: up to 2,815 mm, depending on configuration Extended-length machining capability: up to 5,630 mm, depending on machine configuration and operating conditions Multi-side profile machining capability MAIN FEATURES AND EQUIPMENT Double tool magazine Electrospindle with HSK-F50 tool holder interface CNC control system with operator monitor and keyboard Automatic A-axis rotation Pneumatic clamps for profile positioning and securing Fully enclosed safety guarding Pneumatic clamping system Technical documentation and operating manual Original CE Declaration of Conformity APPROXIMATE OVERALL DIMENSIONS Length: 3,707 mm Depth: 2,139 mm Height: 2,482 mm AVAILABILITY MACHINE AVAILABLE FROM JANUARY 2027

Condition: ready for operation (used), Year of construction: 2021, - USED - 3-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE       X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 2000 mm Dwodpfx Acezbnrieyjd Z-AXIS TRAVEL: 1000 mm DISTANCE SPINDLE NOSE-TABLE: 350 - 1350 mm RAPID FEEDS X-Y-Z: 20 - 18 - 16 m/min SPINDLE: 6000 rpm; 30 kW; ISO 50 - DIN TABLE SIZE: 3000 x 1800 mm MAX ADMITTED LOAD: 10000 Kg HIGH PRESSURE COOLANT: 25 Bar TOOL MAGAZINE: CHAIN-TYPE ; 60 POS MAX TOOL DIAMETER: 125 mm MAX TOOL WEIGHT: 20 Kg CONTROL UNIT: HEIDENHAIN TNC 640 WEIGHT: 32706 Kg OVERALL DIMENSIONS: 9000 x 5290 x 5235 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; MAGNETIC FILTER ; TOOL SETTER ; LINEAR SCALES ; TOUCH PROBE ; PORTABLE HANDWHEEL NOTE: MECHANICAL GEAR BOX

Condition: used, Year of construction: 2001, functionality: fully functional, x-travel 1000 mm y-travel 800 mm z-travel 500 mm Djdpeztfx Aofx Acyswd control Siemens 611

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: Fanuc 16i-M, controller model: 16i-M, table width: 390 mm, table length: 850 mm, rotational speed (min.): 80 rpm, rotational speed (max.): 8,000 rpm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 300 mm Table size: 850 × 390 mm Controller: Fanuc 16i-M Spindle taper: BT30 Spindle speeds: 80 - 8000 rpm Tool changing time: 1.0 sec. ATC: 14 pockets Including: 3x machinevices 36 Toolholders Oilfilter Filtermist S800 Machine manuals Djdjyw Inqopfx Acyowd Country of origin: Japan Motor power: 3.7 kW Machine (L×W×H): 160 × 190 × 220 cm Machine weight: 1900 kg

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, Digital automatic drilling machine BIESSE SKIPPER 130 Working condition. Free for loading. Doderkm R Hepfx Acyjwd

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WORKPARTNER SYSTEM 3R, 115 POSITIONS, MANUFACTURED IN 2014 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: X 600, Y 450, Z 450, B +45º/-120º, C, X 360º SPINDLE: 20,000 RPM, 36 KW, HSK-A63 LINEAR SCALES ON X, Y, Z 120-TOOL CHANGER ROBOT SYSTEM 3R WITH 115 PALLETS Dwedpsy Twa Ujfx Acyjd TOOL MEASURING PROBE WORKPIECE MEASURING PROBE PAPER FILTER SPINDLE COOLING UNIT

Condition: excellent (used), IMA BIMA QUADROFORM C80/280.01 – Industrial CNC Machining Center For sale: an industrial CNC machining center manufactured by the German company IMA Maschinenfabrik Klessmann GmbH, model BIMA QUADROFORM C80/280.01. Identification data: Dwodpfx Aco Ahlzaoyed Manufacturer: IMA Maschinenfabrik Klessmann GmbH Model: BIMA QUADROFORM C80/280.01 Year of manufacture: 1996 Serial number: 20550 Type: industrial CNC machining center Purpose and capabilities: The center is designed for the industrial machining of furniture components and wood-based materials. Typical operations performed on this type of machine: milling, drilling, grooving, contour machining, sizing of components. Equipment visible in the photos: structure and working unit of the CNC center, worktable with material clamping elements, machining units and working heads, control cabinet, operator panel. Technical condition: The machine is in good working order. The equipment can be inspected on site. The sale includes the machine with the equipment visible in the photos.

Condition: used, Year of construction: 2012, table-size 1700 x 925 mm taper ISO 50 tool change unit 32 Fach Dwodpfx Aszy Si Ijcyjd speeds: 60 – 6000 U/min x-travel 1520 mm y-travel 800 mm z-travel 680 mm workpiece dia. max. 2000 kg machine weight ab. 16000 kg dimensions of the machine ca. 6000 x 3600 x 3600 mmxmmxmm

Condition: used, CNC Machining Centre – Pertici FC1000, Year 2018 The Pertici FC1000 is a high-productivity CNC machining centre for PVC profile processing. It automatically loads, positions, machines and unloads profiles, ensuring fast and efficient production. Equipped with 7 machining spindles and an automatic screwdriving unit, it performs all machining operations in a single cycle. The machine is controlled by Pertici CNC software, compatible with the main production management systems, and features an automatic magazine for up to 10 bars with a maximum length of 6,100 mm, processing profiles from 35 to 130 mm wide. Main Features 7 machining spindles Integrated automatic screwdriving unit Automatic magazine for up to 10 bars Fully automatic loading and unloading Pertici CNC software Automatic profile handling and positioning system Heavy-duty industrial frame Soundproof safety enclosure Technical Data Installed power: 6.8 kW Power supply: 380 V three-phase Dedpozg Eggjfx Acyowd Frequency: 50 Hz Air pressure: 6.5 bar Weight: 1,490 kg Maximum bar length: 6,100 mm Profile width: 35–130 mm Available for immediate delivery from October 2026.

Condition: good (used), Year of construction: 2004, functionality: fully functional, For sale used KIWA KNH-426 machining centre in excellent condition. Year: 2004 4 axis, 6 pallet station horizontal machining centre with Fanuc Series 18i-M control Dwodpfx Asugtlpocyjd The machine can be viewed on site by prior arrangement. Delivery parity: EXW Székesfehérvár. We can assist in disassembling and assembling the machine on request.

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: Sinumerik ONE, _____ Description: Year of manuf. : 2024 Control : Siemens Sinumerik ONE Speed : 8000 rpm Movement X/Y/Z : 1000/1000/1000 mm Tool holder : HSK-A100 Spindle: Technology:Gearbox Spindle Speed:8.000 rpm Power (max.):60 kW Torque (max.):1.146 Nm Taper:HSK-A100 NC-Roundtable: B-Axis:0,001° Palletsize:630 x 630 mm In general: Toolmagazine:425 stations Rapid travers in X/Y/Z:50 m/min Dwedsz N Rbgjpfx Acyjd Equipment/Accessory: Positionsensor:Direct Scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbelt-filter and high-pressure, 70bar Workpiecemeasurement:Touchprobe, Renishaw RMP60 Toolbreakagecontrol:Taktil Softwareoption:Process-integrated tool monitoring Automation I:Palletchanger, 2 stations Automation II:Interface FASTEMS MLS Oilmistseparation:Interface mechanical prepared Further Accessory:Rinsing pistol