Used M 6090 for sale (69,176)

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth Hnodpjxa H Ewefx Afnjh It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS Hjdpjwzmcbofx Afnenh In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it Hnsdpfewfgbrsx Afneh ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens Hnodedzc Rxepfx Afnsh ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: new, Heavy duty splicing press for producing long lengths of timber Simple to use Top and bottom plates press simultaneously Very quick cycle time 35 tonne capacity hydraulic pack 7.5Kw motor Pneumatically operated head Maximum timber section 75 x 300mm Two hand control unit Manual eccentric side clamping Optional 2m infeed and outfeed tables Hedpfspahmhsx Afnonh

Condition: new, A simple range of scissor type lifts for attaching to a crane hoist for the lifting of panels using (customer supplied) crane. 1 tonne capacity Minimum wall panel height 2000mm Hsdpfx Afsfqmtksnsnh Maximum wall panel height 3500mm One man operation Weight of unit 80kgs

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Hnodpfsb Tmrvjx Afneh Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Hjdpfx Afsdzc Rfjnjnh Optional side and end stops for floor cassette assembly

Condition: reconditioned (used), Year of construction: 2016, M&J / Metso 6000-12 Preshredder (Mint Condition) 2 × 200 kW HDC with new P30 hydraulic pumps Installed in 20 ft container Complete with oil cooler Cutting table 6000-12 knives Complete with bearings and renovated hydraulic motors. Ready for immediate delivery – excellent condition, barely used. Perfect solution for high-performance shredding and heavy-duty applications. Hnodjx Satuopfx Afnoh Contact us today for price and availability.

Condition: good (used), In good technical condition and fully operational. Manufacturer: Bud Masz M. Stachlewski Steel thickness – 0.5-1 mm. Profile height: 40 mm. Entry width: 1250 mm. Overall width: 944 mm. Effective width: 915 mm. Min./max. length at a thickness of 0.5 lm/12 lm starting from a thickness of 0.75 mm Accessories, auxiliaries: screws, sealing tapes, profiled gaskets, Hedpsx Tf Hcefx Afnsnh anti-condensation treatment, light-transmitting profiles

Condition: used, total height: 1,550 mm, total length: 1,400 mm, total width: 1,100 mm, Weight: 1.500 kg Hjdpfx Afsxixh Aonenh - Documentation available: No - CE certificate present: No - Max. saw length [mm]: 6000 - Max. saw height [mm]: 230 - Input table length [mm]: 6000 - Options: Automatic pusher system - Transport dimensions: 1400mm x 1100mm x 1550mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm Hnedpex Swu Asfx Afnoh - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Year of construction: 2003, condition: excellent (used), machine/vehicle number: MBUT136, ! bargain price ! Price from 1150 euros R. Stahl 1-girder suspension crane, bridge crane, crane track, indoor crane, gantry crane Payload 250KG 7 cranes available: Hnsdoigl R Ropfx Afnsh 4: Steel suspension crane NL 250KG, width 6.35m, track width 5.6m 5: Steel suspension crane NL 250KG, width 2.65m, track width 1.9m 6: Steel suspension crane NL 250KG, width 4.85m, track width 4.35m 7: Steel suspension crane NL 250KG, width 2.90m, track width 2.35m 9: Steel suspension crane NL 250KG, width 6.0m, track width 5.5m 10: Steel suspension crane NL 250KG, width 1.03m, track width 0.74m (1150 euros) 11: Steel suspension crane NL 250KG, width 1.65m, track width 1.25m Track width can be changed, end carriers are screwed with 8 screws. Tracks (IPE 200 - not available) Undercarriages can be adjusted to the carrier dimensions. incl. complete control, floor operation by means of a control bottle All cranes can be moved electrically in all 3 axes Lifting height/hook path approx. 4m Connection to 400V 16A, year of construction 2003 Very good condition, systems were only used for maintenance - hardly used Shipping by courier, collection preferred Location 75053 Gondelsheim Please ask for shipping prices according to zip code, we will make you a non-binding offer immediately!

Condition: good (used), Year of construction: 2016, functionality: fully functional, PASSPORT™ Automatic T-Shirt Unloader - automatic unloader for textiles - fully working Hjdpfxjqvmkdj Afnenh - not much use

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, The best onion peeler in the world, the most expensive but the hardest, the most simplest ! Fully services, we can offer full support for our clients, machine been fully refusrbishment and ready to work. Capacity of peeled product depending of onion size: Pjtx Eswb Uuxodn Dorc Hnjdpjxta U Ejfx Afnoh 50-70 mm +-250 kg/h 60-80 mm +-450 kg/h 70-90 mm +-750 kg/h 90mm+ +- 1000 kg /h Machine is fully stainless steel ! Very little used after full service ready to work, we help you with technical support and with spare parts ! Machine require air screw compressor min 2700 l/m 5-8 bar We can help configurate your factory!

Condition: like new (used), functionality: fully functional, Year of construction: 1999, operating hours: 24 h, overall weight: 1,200 kg, total width: 1,000 mm, total height: 2,500 mm, I am selling stainless steel MK2 M&P engineering onion peeler, machine is fully refurbished, after full service & ready to work. Hnodpeurb R Eofx Afnjh The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Link for video presentation by producer: Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: used, Year of construction: 1996, functionality: fully functional, cutting height (max.): 120 mm, cutting width (max.): 350 mm, Multiblade + trimmer CML mod J 350 RT Ce kW 37 Hnedpfsvlxbxox Afnsh

Condition: new, input voltage: 400 V, - EXCELLENT QUALITY FROM EUROPEAN SOURCES - STAINLESS STEEL SPIRAL - STAINLESS STEEL TUB - WITH PROGRAMMABLE DIGITAL CONTROL FOR BOTH SPEEDS - ALSO WITH MANUAL BUTTON ON DISPLAY Hnsdpfxsx At Hts Afneh - CAN ALSO ROTATE IN REVERSE DIRECTION - TUB CAN BE ROTATED SEPARATELY - AFFORDABLE PRICE FOR GREAT QUALITY

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, conveyor belt length: 1,000 mm, conveyor belt width: 600 mm, overall weight: 50 kg, Here we offer a fully functional counting conveyor belt (conveyor belt with infrared counting sensor – digital counter). Manufacturer: M-Fördersysteme Year: 2007 – lightly used 16A connection Hnsdpfx Ajxz Rvvofnjh 6 units available

Condition: excellent (used), Year of construction: 2021, Year of construction: 2021/2022 Space requirement for entire system: 10x32 meters Total connected load: approx. 350 kW Peak value: approx. 120 kW Average value: approx. 90 kW Personnel requirement: min. 2 people Cutting capacity: maximum 80-100 fm/8h Round log diameter: min. 10cm max. 100cm Hjdpovw Ry Dsfx Afnsnh Round log lengths: min. 100cm max. 600cm Edging system: 3-stack variable / 120mm cutting height Due to a restructuring of the company, a new, complete band sawmill is for sale as follows: - Round log feeder - Block puller - Balz debarking machine BG 90 6W-GR - Steep conveyor with feeder - Tension carriage ELCA Legno CRO 17 - Band saw ELCA Legno SNI 14 - Conveyor belt - Trimming machine Möhringer 323 001 12 - Stacking system M-TEC - Disposal line / chipping system ZENO ZTI 600/520/160

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Hnsdpfx Asvllxdofnoh Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Year of construction: 2019, condition: used, functionality: fully functional, For Sale: M&P Radish Top & Tail Machine – High-Efficiency Vegetable Processing Manufacturer: M&P Engineering Model: Radish Top and Tail Machine Condition: Excellent / Fully Operational Location: Fincham, Norfolk Availability: Immediate Description: Boost your vegetable processing efficiency with this M&P Radish Top and Tail Machine – a high-performance solution designed for the precise and rapid trimming of radishes. Built to the highest standards by M&P Engineering, this machine is ideal for commercial vegetable processors looking to streamline operations and maintain consistent product quality. Key Features: Accurate Top & Tail Cutting – Clean, consistent cuts reduce waste and improve product appearance. High Throughput Capacity – Designed for continuous operation and optimal productivity. Hygienic Stainless Steel Construction – Easy to clean and built for food-grade environments. Hsdpfx Afewtf Awjnjnh Adjustable Settings – Accommodates different radish sizes for maximum flexibility. Plug & Play Setup – Minimal installation time; ready for immediate use. Ideal for: Food processing plants, fresh produce packhouses, and ready-to-eat salad manufacturers.

Condition: good (used), Buderus 825 M-2500kw. Low temperature boiler Hnsdpfou I Ruasx Afnjh

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Hedsxcal Aspfx Afnsnh

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. Hjdpfsxcalcox Afnonh The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.