Used M 6090 for sale (27,858)

Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWc 20.20 Dry bulkhead Dimensions: 2000 x 2000 mm W X H + Fan in the height Hsdpfefn Ndcex Ah Honw Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: used, 1 mortar mixer, manufacturer M-tec, model D 20 II, year 2022, 400V, serial no. 5800220521 Hjdpfx Ahsxvy Tas Honw

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m Hnedpfjdzc Rxsx Ah Hew 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: excellent (used), Continuous mixer M-tec D 10 Hedpeirfp Ijfx Ah Henw Drive power 2,2 kW Mixer capacity approx. 20 l/min 14 pieces available Very good ready to use condition, directly from production!!!

Condition: excellent (used), Year of construction: 2020, L+M EcoCell 3.9-1200 C Dust Extraction System TECHNICAL DATA Manufacturer: L+M AG Model: EcoCell 3.9-1200 C Year of Manufacture: February 2020 Airflow Volume: 3,000 m³/h Voltage: 400 V Current Draw: 7.60 A Power: 5.50 kW Frequency: 50 Hz ATEX Compliance: ATEX 2014/34/EU Control System: Reco RM-DPC Micro FP Filter Status Display: FC-240 Spark Detection: Control Logic PAN-705 Spark Control Panel Filter Elements: 9 units SCOPE OF DELIVERY Includes (not an exhaustive list): - L+M EcoCell 3.9-1200 C dust extraction system Hjdpsxflx Tefx Ah Hjnw - Filter status display - Spark monitoring system - 9 x filter elements - VDL rotary airlock with motor drive - Control cabinet with operator controls - Additional WESCO separator Exact scope of delivery as shown in the photo series The L+M EcoCell 3.9-1200 C dust extraction system was built in February 2020 and offers a high-performance and safe solution for industrial extraction and filtration tasks. With an airflow volume of 3,000 m³/h, a power rating of 5.50 kW, and robust ATEX certification according to 2014/34/EU, the system is ideally suited for use in hazardous (explosive) environments. It features a state-of-the-art Reco RM-DPC Micro FP control unit and an FC-240 filter status display for precise system monitoring and management. For added safety, it is equipped with a PAN-705 spark detection system. Nine high-performance filter elements ensure efficient separation of dust particles. The configuration also includes a motor-driven VDL rotary airlock, a control cabinet with operator elements, and an additional separator from WESCO. This combination guarantees a reliable, safe, and durable dust extraction solution for demanding industrial applications. No guarantee is provided for the accuracy, completeness, or timeliness of the information.

Condition: new, TECHNICAL DATA: - Base area: 15,000 x 24,000 mm [other variants available] - Grid spacing: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard P6, raw/white - Load capacity: 500 kg - Colour: RAL color of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights are available on request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing cross-members - Flooring - Fastening material PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €4,499.65 net, plus transport costs and VAT. Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €7,393.50 net, plus transport costs and VAT. Variant III: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €7,303.60 net, plus transport costs and VAT. Variant IV: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €10,513.84 net, plus transport costs and VAT. Variant V: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €13,707.36 net, plus transport costs and VAT. Hjdpfsxpiztex Ah Hjnw Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €19,027.30 net, plus transport costs and VAT. Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €25,003.69 net, plus transport costs and VAT. Additional configurations available. Optional accessories: - Railing - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your warehouse platform exactly according to your operational requirements – tailored to area, load-bearing capacity, platform height, and intended application. Our planning department will prepare a custom, non-binding offer for you based on your specifications. Whether new construction, extension, or modernization of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipment is available at an additional cost. The extra costs depend on the place of delivery and the size of the consignment, and can be specified individually on request. PAYMENT TERMS Payment terms will be agreed upon when placing the order. The price is to be understood as unit/net price or as stated in the description (plus VAT). You will of course receive an invoice showing VAT. ABOUT US The company DLK, located in Nordhorn, deals in new and used products for warehousing logistics, conveying technology, mezzanine floors, textile storage solutions, as well as in machinery for commerce, industry, and craft trades. We constantly offer attractive used machines from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us at any time. ✅ Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. Hnodpfx Ahsfn Ndds How T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: used, 1 mortar mixing machine, manufacturer M-tec, model D 20 II, year 2022, 400V, serial no. 5800220522, internal no. 4 Hnsdpfx Ajxvy R Eeh How

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) Hnodpfsdzc Rfox Ah Hsw 4m maximum panel height Optional side and end stops for floor cassette assembly

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Hodoxcal Ajpfx Ah Honw

Condition: new, TECHNICAL DATA: - Footprint: 15,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm particle board (P6 raw/white) - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The platforms are expandable in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Delivery scope: - Columns - Primary and secondary beams - Bracing crossbars - Flooring panels - Fastening materials PRICES: Variant I: Footprint: 30 m² | Area: 5,000 x 6,000 mm | €3,598.65 net, plus transport costs and VAT. Variant II: Footprint: 60 m² | Area: 5,000 x 12,000 mm | €6,418.50 net, plus transport costs and VAT. Variant III: Footprint: 60 m² | Area: 10,000 x 6,000 mm | €6,423.45 net, plus transport costs and VAT. Variant IV: Footprint: 90 m² | Area: 5,000 x 18,000 mm | €9,104.40 net, plus transport costs and VAT. Variant V: Footprint: 120 m² | Area: 5,000 x 24,000 mm | €11,890.80 net, plus transport costs and VAT. Variant VI: Footprint: 180 m² | Area: 10,000 x 18,000 mm | €16,281.60 net, plus transport costs and VAT. Variant VII: Footprint: 240 m² | Area: 10,000 x 24,000 mm | €21,471.36 net, plus transport costs and VAT. Further variants available Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision guard YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg Hsdpexpizaofx Ah Honw - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your requirements – tailored to surface area, load capacity, installation height and intended area of use. Based on your specifications, our design department will prepare an individual, non-binding offer for you. Whether new construction, expansion or modernization of existing systems – we support you with expert know-how and practical solutions. TRANSPORT & INSTALLATION We are happy to assist with the transport and installation of the goods. This item is available for collection. Delivery or shipping is available for an additional charge. Additional costs depend on the delivery location and volume of the shipment and can be quoted individually on request. PAYMENT TERMS Payment terms are to be agreed upon in case of order. The stated price is per unit/net, or as specified in description (plus VAT). You will of course receive an invoice with VAT indicated. ABOUT US The company DLK in Nordhorn deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The building blocks of success at DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: used, 1 mortar mixing machine, manufacturer M-tec, model D 20 II, year 2024, 400V, serial no. 5800240504 Hjdpfx Ahsxvy N Is Honw

Condition: new, A simple range of scissor type lifts for attaching to a crane hoist for the lifting of panels using (customer supplied) crane. 1 tonne capacity Minimum wall panel height 2000mm Hjdpofqmtkofx Ah Henw Maximum wall panel height 3500mm One man operation Weight of unit 80kgs

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. Hjdpfxjxcalce Ah Hjnw The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.

Condition: new, TECHNICAL DATA: - Base area: 15,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard, raw/white, P6 grade - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended modularly as per the specified grid. Other sizes and heights available upon request. Our team is happy to advise you! Delivery scope: - Columns - Primary and secondary beams - Bracing crosses - Floor covering - Fastening materials PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €3,400.00 net, plus shipping and VAT Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €6,008.00 net, plus shipping and VAT Variant III: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €6,043.20 net, plus shipping and VAT Variant IV: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €8,512.54 net, plus shipping and VAT Variant V: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €11,154.85 net, plus shipping and VAT Hjdpfx Ahjxpil Ee Hjnw Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €15,343.02 net, plus shipping and VAT Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €20,081.60 net, plus shipping and VAT Additional variants available. Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MANUFACTURING This platform system is an example from our standard range. Of course, we plan and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and intended usage. Our design department will prepare a custom, non-binding quote based on your specifications. Whether you are planning a new installation, an extension, or a modernization of existing equipment, we support you with professional expertise and practical solutions. TRANSPORT & ASSEMBLY We would be pleased to assist you with the transport and installation of the equipment. This item is available for collection. Delivery or shipping is possible at an additional cost. Additional costs depend on the destination and shipment scope and can be provided individually upon request. PAYMENT TERMS Payment terms are agreed upon at the time of order. Prices are per unit/net price unless otherwise specified (plus VAT). You will of course receive an invoice with listed VAT. ABOUT US DLK Nordhorn trades in new and used products for warehouse logistics, conveyor technology, warehouse platforms, textile storage, and machinery for commerce, industry, and the trades. We continuously offer attractive used equipment from various manufacturers/brands at favorable conditions. Please feel free to get in touch with any questions. ✅ Four wins – The success building blocks from DLK – Storage technology | Levelmaker® | Logistics | Solutions

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Hjdpfxsb Tmrvj Ah Hjnw Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work, we have one more if you need 2 in your factory, price for two machine could be under negotiate. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Hodpfx Ahjfn N U He Honw

Condition: new, TECHNICAL DATA: - Base area: 20,000 x 15,000 mm [other variants available] - Grid spacing: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm particle board, P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights available upon request. Our team will be happy to advise you! Scope of delivery: - Columns - Primary and secondary beams - Bracing crosses - Floor panels - Mounting hardware PRICES: Variant I: Base area: 25 m² | Area: 5,000 x 5,000 mm | €3,031.80 net, plus transport costs and VAT Variant II: Base area: 50 m² | Area: 5,000 x 10,000 mm | €5,376.95 net, plus transport costs and VAT Variant III: Base area: 75 m² | Area: 5,000 x 15,000 mm | €7,509.23 net, plus transport costs and VAT Variant IV: Base area: 100 m² | Area: 5,000 x 20,000 mm | €9,780.27 net, plus transport costs and VAT Variant V: Base area: 100 m² | Area: 10,000 x 10,000 mm | €9,485.32 net, plus transport costs and VAT Variant VI: Base area: 150 m² | Area: 10,000 x 15,000 mm | €13,729.96 net, plus transport costs and VAT Variant VII: Base area: 200 m² | Area: 10,000 x 20,000 mm | €17,669.70 net, plus transport costs and VAT Variant VIII: Base area: 300 m² | Area: 20,000 x 15,000 mm | €25,669.35 net, plus transport costs and VAT More variants available Optional accessories: - Guard rail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MANUFACTURING This platform system is an example from our standard range. Of course, we design and manufacture your mezzanine platform exactly according to your operational requirements – tailored to area, load capacity, construction height, and intended application. Our planning department will prepare a customised, non-binding offer based on your specifications. Whether new construction, expansion, or modernisation of existing systems – we support you with extensive expertise and practical solutions. TRANSPORT & ASSEMBLY We are happy to support you with transport and assembly. This item is available for collection. Delivery or shipping is possible at an additional charge. Additional costs depend on the place of delivery and shipment volume and can be provided individually upon request. PAYMENT TERMS Payment terms are to be agreed upon order placement. Prices are quoted per unit/net price, as stated in the product description (plus VAT). You will of course receive an invoice showing VAT. ABOUT US DLK in Nordhorn specialises in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage systems, as well as machinery for trade, industry and craft businesses. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Hsdsxpii Ropfx Ah Hsnw ✅ Four to win – The four pillars of success at DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, Heavy duty splicing press for producing long lengths of timber Simple to use Hodpfxopahmhj Ah Hjnw Top and bottom plates press simultaneously Very quick cycle time 35 tonne capacity hydraulic pack 7.5Kw motor Pneumatically operated head Maximum timber section 75 x 300mm Two hand control unit Manual eccentric side clamping Optional 2m infeed and outfeed tables

Condition: new, TECHNICAL DATA: - Base dimensions: 5,000 x 5,000 mm [other versions available] - Grid: 5,000 x 5,000 mm - Top edge of floor surface: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm raw/white chipboard (P6 grade) - Load capacity: 350 kg - Colour: RAL colour of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Flooring - Mounting materials PRICES: Version I: Base area: 25 m² | Dimensions: 5,000 x 5,000 mm | €2,863.50 net, plus shipping and VAT. Version II: Base area: 50 m² | Dimensions: 5,000 x 10,000 mm | €5,040.00 net, plus shipping and VAT. Version III: Base area: 75 m² | Dimensions: 5,000 x 15,000 mm | €7,033.95 net, plus shipping and VAT. Version IV: Base area: 100 m² | Dimensions: 5,000 x 20,000 mm | €9,206.61 net, plus shipping and VAT. Version V: Base area: 100 m² | Dimensions: 10,000 x 20,000 mm | €8,916.48 net, plus shipping and VAT. Version VI: Base area: 150 m² | Dimensions: 5,000 x 5,000 mm | €13,075.20 net, plus shipping and VAT. Version VII: Base area: 200 m² | Dimensions: 10,000 x 20,000 mm | €16,519.56 net, plus shipping and VAT. Version VIII: Base area: 300 m² | Dimensions: 5,000 x 5,000 mm | €24,309.81 net, plus shipping and VAT. Additional versions available Hnedpfxoxpic Rs Ah Hew Optional accessories - Guard rails - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional cost. The extra charges will depend on the delivery location and scope of the shipment and can be provided by us upon request. PAYMENT TERMS Payment terms are agreed upon in the event of an order. All prices are per unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals with new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for commerce, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive terms. Please contact us with any questions. Four wins – The cornerstones of DLK’s success – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: new, A self assembly heavy duty modular timber frame table suitable for framing and boarding of panels. The modular 2m or 3m x 1m tables can be assembled in various configurations, to suit either wall panels or floor cassettes. 4 off 2m / 3m x 1m Modular tables suitable for frames up to 4m / 6m x 2.8m PLY top with channel for fitting (optional) pop up rollers Complete with: 1 fixed infill for spacing the table to 2.8m capacity 1 sliding infill for supporting subcomponents inside the panel. 9m of fixed fence (6m length x 3m width) Working Height 700 - 850mm Hedpfx Ahen Up R Ij Honw

Condition: new, TECHNICAL DATA: - Floor area: 20,000 x 15,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: Chipboard 38 mm P6 untreated/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Hsdexph A Ajpfx Ah Honw The platforms can be extended in the stated grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing - Flooring - Fastening materials PRICES: Variant I: Floor area: 25 m² | Dimensions: 5,000 x 5,000 mm | €2,711.50 net, plus shipping and VAT. Variant II: Floor area: 50 m² | Dimensions: 5,000 x 10,000 mm | €4,756.00 net, plus shipping and VAT. Variant III: Floor area: 75 m² | Dimensions: 5,000 x 15,000 mm | €6,659.80 net, plus shipping and VAT. Variant IV: Floor area: 100 m² | Dimensions: 5,000 x 20,000 mm | €8,662.00 net, plus shipping and VAT. Variant V: Floor area: 100 m² | Dimensions: 10,000 x 10,000 mm | €8,381.70 net, plus shipping and VAT. Variant VI: Floor area: 150 m² | Dimensions: 10,000 x 15,000 mm | €12,162.50 net, plus shipping and VAT. Variant VII: Floor area: 200 m² | Dimensions: 10,000 x 20,000 mm | €15,136.80 net, plus shipping and VAT. Variant VIII: Floor area: 300 m² | Dimensions: 20,000 x 15,000 mm | €22,782.72 net, plus shipping and VAT. Further variants available Optional accessories: - Handrail - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MANUFACTURING This platform system is an example from our standard range. Of course, we design and build your mezzanine platform precisely to your operational requirements – adapted to surface area, load capacity, installation height and intended area of use. Our planning department will provide you with a customized, non-binding quotation based on your specifications. Whether new construction, extension or modernization of existing systems – we support you with comprehensive expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist with transport and installation of your goods. This item is available for collection. Delivery or shipping is possible at an extra charge. Additional costs depend on the delivery location and consignment size and can be requested from us on an individual basis. PAYMENT TERMS Payment terms will be agreed upon in case of order. The price is per piece/net price as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. Please feel free to contact us with any questions. ✅ Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 16,000 x 20,000 mm [other sizes available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm particleboard, P6 raw/white - Load capacity: 250 kg - Color: RAL of your choice - Condition: new Scope of delivery: - Columns - Main and secondary beams - Bracing crossmembers - Floor covering - Fastening material PRICES: Variant I: Base area: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,137.50 net, plus transport and VAT Variant II: Base area: 40 m² | Dimensions: 4,000 x 10,000 mm | €3,979.30 net, plus transport and VAT Variant III: Base area: 40 m² | Dimensions: 8,000 x 5,000 mm | €3,874.00 net, plus transport and VAT Variant IV: Base area: 60 m² | Dimensions: 4,000 x 15,000 mm | €5,655.36 net, plus transport and VAT Variant V: Base area: 80 m² | Dimensions: 4,000 x 20,000 mm | €7,445.76 net, plus transport and VAT Variant VI: Base area: 80 m² | Dimensions: 8,000 x 10,000 mm | €6,986.24 net, plus transport and VAT Variant VII: Base area: 80 m² | Dimensions: 16,000 x 5,000 mm | €7,061.76 net, plus transport and VAT Variant VIII: Base area: 120 m² | Dimensions: 8,000 x 15,000 mm | €9,930.06 net, plus transport and VAT Variant IX: Base area: 120 m² | Dimensions: 10,000 x 12,000 mm | €9,671.76 net, plus transport and VAT Variant X: Base area: 160 m² | Dimensions: 8,000 x 20,000 mm | €13,063.67 net, plus transport and VAT Variant XI: Base area: 160 m² | Dimensions: 16,000 x 10,000 mm | €12,880.98 net, plus transport and VAT Variant XII: Base area: 240 m² | Dimensions: 16,000 x 15,000 mm | €18,258.52 net, plus transport and VAT Variant XIII: Base area: 320 m² | Dimensions: 16,000 x 20,000 mm | €23,955.92 net, plus transport and VAT Optional accessories: - Railings - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL PLANNING & CUSTOM MANUFACTURING This mezzanine platform is an example from our standard range. Of course, we develop and manufacture your storage mezzanine precisely according to your operational requirements – tailored for area, load capacity, installation height, and the intended field of application. TRANSPORT & INSTALLATION We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged for an additional charge. The extra costs depend on the delivery location and the scope of the shipment and can be individually requested from us. TERMS OF PAYMENT Payment terms are to be agreed upon in the event of an order. All prices are quoted as unit price/net price or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, specializes in the trade of new and used products in the areas of warehouse logistics, material handling systems, mezzanine platforms, textile warehouses, as well as machinery for commerce, industry, and trades. Hjdpfxoxpha Io Ah Henw ✅ Four factors for success – The building blocks of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 16,000 x 20,000 mm [other versions available] - Grid: 4,000 x 5,000 mm - Finished floor height: 3,340 mm - Clear height: 3,000 mm - Floor covering: chipboard 38 mm P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: Variant I: Base area: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,091.60 net, plus transport costs and VAT. Variant II: Base area: 40 m² | Dimensions: 4,000 x 10,000 mm | €3,754.80 net, plus transport costs and VAT. Variant III: Base area: 40 m² | Dimensions: 8,000 x 5,000 mm | €3,591.00 net, plus transport costs and VAT. Variant IV: Base area: 60 m² | Dimensions: 4,000 x 15,000 mm | €5,395.00 net, plus transport costs and VAT. Variant V: Base area: 80 m² | Dimensions: 4,000 x 20,000 mm | €6,825.00 net, plus transport costs and VAT. Variant VI: Base area: 80 m² | Dimensions: 8,000 x 10,000 mm | €6,462.50 net, plus transport costs and VAT. Variant VII: Base area: 80 m² | Dimensions: 16,000 x 5,000 mm | €6,552.50 net, plus transport costs and VAT. Variant VIII: Base area: 120 m² | Dimensions: 8,000 x 15,000 mm | €9,238.00 net, plus transport costs and VAT. Hnsdpfexpg Udox Ah Hew Variant IX: Base area: 120 m² | Dimensions: 10,000 x 12,000 mm | €8,785.40 net, plus transport costs and VAT. Variant X: Base area: 160 m² | Dimensions: 8,000 x 20,000 mm | €12,211.52 net, plus transport costs and VAT. Variant XI: Base area: 160 m² | Dimensions: 16,000 x 10,000 mm | €12,040.40 net, plus transport costs and VAT. Variant XII: Base area: 240 m² | Dimensions: 16,000 x 15,000 mm | €17,580.72 net, plus transport costs and VAT. Variant XIII: Base area: 320 m² | Dimensions: 16,000 x 20,000 mm | €23,076.40 net, plus transport costs and VAT. Optional accessories: - Guard rail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PARTNERS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL PLANNING & CUSTOM PRODUCTION This platform system is an example from our standard range. Naturally, we develop and manufacture your mezzanine platform precisely according to your operational requirements – tailored to area, load capacity, installation height and intended application area. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible at an additional charge. The extra costs depend on the delivery location and the scope of the shipment and can be inquired from us individually. PAYMENT TERMS Payment terms are to be agreed upon in case of an order. The price is per unit/net price, or as stated in the description (plus VAT). You will of course receive an invoice detailing VAT. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine platforms, textile storage, as well as machinery for trade, industry, and the skilled trades. ✅ Four to win – The building blocks of success at DLK – Storage technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 16,000 x 20,000 mm [other options available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Supports - Main and secondary beams - Cross bracing - Floor decking - Fastening materials PRICES: Variant I: Base area: 20 m² | Area: 4,000 x 5,000 mm | €2,013.00 net, plus shipping and VAT Variant II: Base area: 40 m² | Area: 4,000 x 10,000 mm | €3,531.90 net, plus shipping and VAT Variant III: Base area: 40 m² | Area: 8,000 x 5,000 mm | €3,448.94 net, plus shipping and VAT Variant IV: Base area: 60 m² | Area: 4,000 x 15,000 mm | €5,047.20 net, plus shipping and VAT Variant V: Base area: 80 m² | Area: 4,000 x 20,000 mm | €6,588.00 net, plus shipping and VAT Variant VI: Base area: 80 m² | Area: 8,000 x 10,000 mm | €6,092.40 net, plus shipping and VAT Variant VII: Base area: 80 m² | Area: 16,000 x 5,000 mm | €6,234.00 net, plus shipping and VAT Variant VIII: Base area: 120 m² | Area: 8,000 x 15,000 mm | €8,676.54 net, plus shipping and VAT Variant IX: Base area: 120 m² | Area: 10,000 x 12,000 mm | €8,092.44 net, plus shipping and VAT Variant X: Base area: 160 m² | Area: 8,000 x 20,000 mm | €11,509.72 net, plus shipping and VAT Variant XI: Base area: 160 m² | Area: 16,000 x 10,000 mm | €11,349.24 net, plus shipping and VAT Variant XII: Base area: 240 m² | Area: 16,000 x 15,000 mm | €16,426.80 net, plus shipping and VAT Variant XIII: Base area: 320 m² | Area: 16,000 x 20,000 mm | €21,339.63 net, plus shipping and VAT Other configurations available. Optional accessories: - Guardrails - Flush wall connection - Staircase - Transfer station Hsdoxpg R Sjpfx Ah Honw - Impact protection ⚙️ CUSTOM DESIGN & MANUFACTURING This mezzanine system is just an example from our standard product range. We will of course develop and manufacture your warehouse mezzanine precisely according to your operational requirements – tailored to area, load capacity, installation height, and intended application. TRANSPORT & INSTALLATION We are happy to assist with transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional charge. The extra costs depend on the delivery location and shipment volume, and can be inquired individually. PAYMENT TERMS Payment terms are to be agreed upon when placing the order. The price is a unit/net price or as specified in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ✅ Four advantages – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions