Used Log Bandsaw for sale (2,346)

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 60766, API Radian R20 Laser Tracker – a professional 3D measurement system For sale is a professional 3D laser tracking and measurement system, the API Radian R20, used in industry, quality control, automation, robotics, and industrial metrology. The device is fully functional, ready for use, and comes from the equipment of a research and development company. The tracker was used in industrial conditions as intended. Nodpfx Apezila Sjrswk Technical data: Manufacturer: API – Automated Precision Inc. Model: Radian R20 Serial number: 60766 Year of manufacture: 2016 Measurement range: 20 m Technology: Laser Tracker 3D The set includes: API Radian R20 Laser Tracker controller / control unit SMR reflector tripod tracker transport case accessory transport cases cables and accessories as shown in the photos Technical condition: The device comes from the equipment of a research and development laboratory. The technical and visual condition corresponds to the product photos. Before sale, the equipment undergoes technical verification. Commercial information: The product is covered by a start-up warranty. If you have any questions or need additional information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, A log turning (orientation) system for top-end-first positioning is available for sale. The system was in use for only a few years before the entire log infeed was removed. We also have additional components from the same log infeed available. Nwjdpfowkdt Njx Aprok

Condition: excellent (used), For sale is a Dräger Oxylog 2000 Plus transport ventilator – a professional device designed for ventilating patients during medical transport and in emergency situations. This model is valued for its reliability, ease of use, and robust construction. It supports both invasive and non-invasive ventilation (NIV) and offers VC-CMV, VC-AC, VC-SIMV, and SpnCPAP modes. Technical specifications: Manufacturer: Dräger Model: Oxylog 2000 Plus REF: 2M86737 Date of manufacture: 20.05.2016 Country of manufacture: Germany Built-in Li-Ion battery Gas supply: medical oxygen 270–600 kPa Adjustable tidal volume: 100–2000 ml Breathing frequency: 2–50/min PEEP adjustment: 0–20 mbar Maximum inspiratory flow: 100 l/min FiO₂: approximately 40% (AirMix) or 100% O₂ Device weight: approximately 5.4 kg Condition: The device powers on, and the display is functioning. Visually in good condition, with normal signs of wear and tear resulting from use. The set includes a transport frame, handle, carrying strap, accessory bag, and cables as shown in the photos. The exact set depicted in the photographs is being sold. Ideal for use in emergency medical services, ambulances, patient transport, and as a backup or training device. The device is characterized by its ease of use, compact design, and high resistance to harsh working conditions in the field. Nwodpozphc Aofx Aprok

Condition: new, Semi-automatic saw band grinding machine. MA50 Nwsdpfx Apsvrvhcsrjk incl. a grinding wheel for saw bands with tooth pitch 22 mm

Condition: used, machine/vehicle number: G-BBS124070P, Pilous CTR750EV log band saw, very good condition, new rails, 5.5 kW, 4100 mm band length, 460 kg Nsdpfx Asvw Ecgjprowk Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Bandsaw at a top price: The new stable and robust joiner's bandsaw from Holzprofi impresses with its superb build quality, outstandingly smooth operation, and comprehensive features. Nwedpfx Apowzzgzerek Standard equipment: Cast iron wheels, cast iron table, laser, dual-sided adjustable mitre gauge, and professional rip fence Technical data: Blade speed: 1130/520 m/min Motor output: 2 kW S6 (1.5 kW S1 100% duty, 400 Volt) Wheel diameter: 480 mm Cutting width: 462 mm Cutting height: 300 mm Table size: 678 x 490 mm Blade width: 10 – 25 mm Table tilt: up to 45° Blade length: 3632 mm Weight: 145 kg

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, For industrial sale, a fully automated saw for cutting lumber packages and structural elements – a complete technological line for formatting packages to a specified length. The device is designed for use in sawmills and wooden structure manufacturing plants, where process efficiency, consistent cutting length, and package stabilization during cutting are crucial. Inspection and testing are possible at Delfina 20, 98-354 Siemkowice, POLAND. Operating parameters: • Max. package: 1300 × 1300 mm (width / height) • Max. input package length: 6000 mm • Max. cutting length: 3000 mm • Min. cutting length: 600 mm • Max. package weight: 8000 kg • Cutting accuracy: ±2 mm The minimum package cross-section is determined by the extreme position of the hydraulic clamps – cutting packages with smaller dimensions is permissible. Cutting module: • Main motor 11 kW • HIWIN linear guides with increased load capacity • GB TITANIUM guide + STIHL chain • Automatic guide lubrication system The rigid construction of the unit ensures stable operation and consistent cutting length. Package stabilization: • System of 6 hydraulic clamps (top + side + front and behind the cutting line) • Package support on vertical rollers • Elimination of package movement during saw entry Process automation: • Intelligent package strapping system • Automatic determination of strapping locations • Option for automatic initial cutting • Buffer for cut packages Transport and handling: • Transverse loading conveyor • Transverse unloading conveyor • Automatic package pickup after cutting Waste removal: • Belt conveyor for waste (~10 m) • Hydraulic tilting rollers of the cutting module (protection against large waste jamming) Automation: Nodpsxn Rt Uefx Aprowk • Siemens PLC controller • Yaskawa servo drive and inverters • 21–22” operator panel • Remote service and diagnostics Additionally: • Winter package – heating of the control system • Transport to the customer – included in the price • Installation – included in the price • Commissioning – included in the price • Operator training – included in the price

Condition: like new (used), Year of construction: 2023, operating hours: 111 h, functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 4,000 kg, The PS1600 was designed for shredding pallets into high-quality wood chips. - Recycling of pallets into high-quality wood chips - Significant space saving by eliminating the need for disposal sites - No disposal costs - Simple and safe operation Details Technical data Machine type: PS1600 Operating hours: 111 h Year of manufacture: 03/2023 Cutting unit opening: 284 x 1,588 mm Drive description: Belt drive with a 2-stage gearbox and elastomer damper Drive power: 22 kW Rotor speed: 53 rpm Energy efficiency class: IE3 Voltage / frequency: 400 V / 50 Hz Cutting system: Rotor Feed table with infeed belt and infeed roller Speed control of the infeed rollers Design: Smooth Rotor diameter: 300 mm Number of knife rows: 1 Number of cutting tools: 43 Perforated screen: 70 x 40 mm with chip breaker Color / paint Machine: Gray Covers: Gold yellow Nwjdpozntu Usfx Aprek Control cabinet Control: Siemens LOGO control Color: Light gray Dimensions and weight Machine dimensions: l x w x h 4660 x 2320 x 2030 mm Total weight: 4 t Accessories Discharge screw: 3000 mm Trough chain conveyor 45°: 4000 mm Downpipe: 1000 mm Light barrier in the chip area OPTIONAL on request: Magnetic separator

Condition: used, Year of construction: 2017, Operational condition SPI machine. Njdpfxjw Ty Rbj Aprjwk Ask for specification!

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Nsdpfsw Ty Hcex Aprswk Ask for specification!

Condition: new, semi-automatic band saw with double-sided miter cut R/L 60° including hydraulic band tension indicator Minimum quantity lubrication system can be retrofitted Cutting capacity Nedpfsd Dpzgox Aprswk 90° round 280 mm / flat 410 x 280 mm / square 280 mm 45° R round 280 mm / flat 310 x 150 mm / square 270 mm 45° L round 280 mm / flat 330 x 100 mm / square 280 mm 60° R round 210 mm / flat 205 x 100 mm / square 190 mm 60° L round 220 mm / flat 225 x 100 mm / square 210 mm Material support height 756 mm Saw band dimensions 3800 x 0.9 x 27 mm Cutting speed 20-120 m/min Drive power 2.2 kW Dimensions L x W x H 2130 x 1070 x 1440 mm Weight 530 kg Price on request

Condition: new, Year of construction: 2025, overall weight: 150,000 kg, We offer Lines for shredding and separating non-ferrous metals and copper cables. The line can be freely modified according to the customer's needs. The attached visualization is illustrative. Machines included in the line: Drum Belt Magnetic Separator Multi-shaft shredder 2 x 18.5 kW MCW-110 1. Loading conveyor (controlled automatically by shredder, according to load) Technical data: - L – 4000mm -Working width – 720mm - Height – 2100mm - Geared motor – 1.5kW - PVC conveyor belt equipped with straight cleats. - Steel structure, placed on self-adjusting wheels 2. Unloading conveyor (receives the shredded material for further process) Technical data: -L. – 3600mm - Working width - 400mm - H – 2000mm - Geared motor – 1.1kW - PVC conveyor belt equipped with a sealing wave and straight cleats - Structure made of acid-resistant steel, placed on self-casting wheels 3. Magnetic separator – (automatically separates unwanted steel elements from the belt of the unloading conveyor) Technical date: - L – 1400mm - Working width – 380mm - Height – 300mm - Geared motor – 0.55kW - Structure made of acid-resistant steel - PVC conveyor belt equipped with straight cleats - Magnetic plate made of permanent magnets 4. Magnetic plate with quick-cleaning overlay – (separates very small steel elements) Technical date: - W – 490mm - L – 330mm -H- 80mm - Housing made of acid-resistant steel Vibrating feeder PWR-1000 Nwedpfov I Shdox Aprek Eddy Current Separator WPS-1000 Discharge conveyor no. 2 of the WPS-1000 separator . Horizontal shredder RKZ-1200 Dust extraction DUST EATER OPW-400 GoldRiver SWZ-700 Water Separator Automatic plastic receiver Automatic metal vibration receiver.

Condition: new, Mini Cable Recycling Line with a capacity of 50-80kg/h The set includes: 11kW grinding mill - TORNADO 320 Compact dust removal system Belt conveyor Water separator - GOLD RIVER 300/1250 Technical data of the installation: Installed power - 13kW Power supply - 400V; 50Hz Batch efficiency - 50kg/h (this is a real value, checked on basic materials). Dimensions - 3500x3600x1950mm Weight - 950kg Spare consumables included. This is a set of high-quality devices created for cable recycling. The basis of the entire recycling process is proper fragmentation and separation, TORNADO series grinding mills have been designed so that the input material leaves the chamber in a short time, the enlarged sieve area and balanced rotation of the cutting rotor provide us with uniformly cut material fractions. The use of an innovative water system with pressure control valves in GOLD RIVER series separators allows for very precise separation of materials that are difficult to separate. The introduction of a new separation mat solution in combination with several other technical parameters allows for the separation of a single copper wire with a thickness of 15 microns [µm]. At the same time, maintaining the ideal purity of the plastic. Solid Polish workmanship supported by experience ensures a very long service life. The materials used for production are carefully selected in terms of type and meeting the appropriate strength parameters. We provide full post-warranty service throughout the country, we have every part for the offered devices. Recyclable materials: Aluminum cables of all kinds Car harnesses with adhesive insulation Computer tapes Network and telephone cables Coaxial cables, Christmas tree lights Copper wires filled with silicone or gels 15-micron winding coils, contaminated with plastic and sticky paper Nwsdpfx Asv I Skroprjk Winding coils filled with silicone coating IMPORTANT!! We provide real performance!

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Nsdpfx Apsyh Hc Rorswk

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Nwedpfxowmm U Us Aprek

Year of construction: 2018, operating hours: 10 h, condition: good (used), functionality: fully functional, Subject: RZ125-315 pump with diffuser, impeller for water with blades - Pump operating parameters: Q = 80-150 m³/h H = 14.7-12.5 m - Material: cast iron, grade ŻL250 - Sealing: rope seal - With 3SIE160L-6 motor, 11 kW, 960 rpm, 400V 2. Quantity: 2 pcs. Nwsdpfx Asztxvnoprjk

Condition: used, This listing is for theC Technologies IN-VPE-Flows Flowpipe The unit is in full working condition and is ready for immediate use 1. CTech™ FlowVPE or FlowVPX Systems Nwsdpsxhfqujfx Aprsk These are variable pathlength UV–Vis spectrophotometer systems designed for inline process monitoring in bioprocessing. The FlowVPE System is built for flexible measurement configurations and lab-to-manufacturing scalability, while the FlowVPX System is tailored for GMP environments with compliance capabilities

Condition: new, Year of construction: 2026, CNC 1212INDUSTRY 2.0 6kW 1200x1200 milling machine with Becker KVT 3.140 vacuum pump The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1200 x 1200 mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Technical data: Manufacturer: TechnologieCNC Model: 1212 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in free runs: up to 33m/min Max. working speed in the material: up to 25m/min Nwedpfxotu H Tus Aprek Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1200x1200x300mm - Hybrid table (vacuum + T-slot) Control: NK-105 G2 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Weight: approx. 650kg Dimensions: For transport - 220 / 190 / 220 Machine assembled and ready to work - 220 / 225 / 230 Standard equipment Hybrid table, i.e. vacuum table enabling non-invasive fixing of the element, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller Tool height sensor included Central oil lubrication system for trolleys and guides as standard equipment Drive transmission is carried out via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation

Condition: new, Year of construction: 2026, Working area: X - 2100mm, Y - 3000mm Z axis clearance: 300mm Worktable type: hybrid, i.e. vacuum + mechanical rails Number of vacuum sections: 6 Maximum working speed in slow motion: up to 40m/min Maximum Working speed: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Njdjzr D Nwspfx Aprewk 9kW electrospindle, 24,000 rpm with full ceramic bearings Becker VTLF 2.250 vacuum pump Drive: Full Leadshine AC servo drives with 1500W power and high holding torque (double on the Y axis) Drive transmission: High-precision NIDEC SHIMPO planetary reducers Drive system: 30mm PMI linear guides and carriages with helical inclined strips with maximum contact area Guide lubrication system: Automatic Tool length measurement system: Automatic Control system: NK-105 G3 controller Standard CAD/CAM software: Artcam Open 2016 Optional CAD/CAM software: Vectric Cut 2D PRO (Ramp access function, automatic nesting) - additional cost PLN 2,000 net Power supply: 3PH, 400V, 50-60Hz Fire-rated wiring, bendable and protected against deformation Machine dimensions: 4835 x 2900 x 2205mm

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1624, tooth pitch: 1 mm, We offer this new ILPRO Technology I80GF-C saw-blade sharpening and I70 GF setting machine, year of manufacture 2025. Model: I80GF-C sharpening machine for bandsaw blades Serial number: 1624 Year of manufacture: 2025 TECHNICAL DATA: BANDSAW BLADE Width 8-80 mm Thickness 0,4-1,2 mm Tooth pitch 1-28 mm Nwsdpszudfwjfx Aprek Clearance angle 0°-12-20° Teeth/minute 10-100 Model: I70GF setting machine for bandsaw blades Serial number: 1625 Year of manufacture: 2025 TECHNICAL DATA: BANDSAW BLADE Width 8-80 mm Thickness 0,4-1,2 mm Tooth pitch 3-28 mm Clearence angle 0°-12-20° Teeth per minute 120-200 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 720 kg, warranty duration: 12 months, welding current (min.): 800 A, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, The SITEC ITR1200 CN is a tilting rotary table with CNC control, designed for circumferential welding of large components. Thanks to its robust structure, brushless drive, and fully programmable management, it guarantees high precision, reliability, and repeatability of the processing cycles. Key features: Table diameter: 1,000 mm Maximum load in the horizontal plane: 1,200 kg Rotation speed: 0.04 – 2 revolutions/min Nwodpfx Aszlih Seprsk Bending moment: 300 kgm Torque: 150 kgm Hydraulic tilting: 0° – 100° Welding processes: TIG / MIG Brushless motor with permanent magnets and digital control CNC with integrated PLC Touch screen display for programming and cycle management Storage and retrieval of welding programs Setting of overlap, number of tack welding points, and processing parameters Rotating mass 800 A High-rigidity, electro-welded steel structure Advantages: High precision and repeatability of welding Complete control of processing cycles Reduced setup times High-efficiency and low-maintenance brushless drive Ideal for industrial production and heavy-duty machining Applications: Particularly suitable for welding tanks, vessels, flanges, dished ends, large-diameter pipes, and components for the energy, plant engineering, shipbuilding, and metalworking industries. Customization: The machine can be configured with numerous optional features and accessories, including pneumatic torch holders, dedicated supports, and further customizations to adapt to specific production requirements. For more information, photographs, demonstration videos, and available configurations, please do not hesitate to contact us.

Condition: like new (used), 5 units of safety light barriers Light curtains Manufacturer: Datalogic Automation S.r.l. Nedpszrfp Sefx Aprjwk Series: SG4 Base Type: SG4-30-120-OO-X Protection class: IP65 Power supply: 24 V DC ±20% Range: up to 20 m Resolution: 30 mm Protective field height: approx. 1,200 mm (type designation “120”) Standards/Certifications: CE, UL

Condition: ready for operation (used), Adept Technology 10337-15200 servo amplifier control robot board, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nwsdpfei D Tt Eex Aprsk

Year of construction: 2020, condition: refurbished (used), functionality: fully functional, Refurbished at Industrial Microwave Services Ltd to comply with UK Safety Standards. • Manufacturer/Brand: Tianjin Leici Electronic Technology Co., Ltd. (A prominent Chinese specialized manufacturer of industrial microwave drying systems and component integration). • Core Subsystem Model: MG1000 (Specifically utilizing the MG1000 Microwave Inverter Power Supply units coupled with dedicated industrial air-cooled magnetrons which have been upgraded). • Equipment Classification: 18kW Industrial Tumbling Cage Microwave Drying/Sterilization Oven. The 18kW total operating rating is achieved structurally by stacking 18 modular 1kW MG1000 power-and-magnetron sets together inside the machine grid. Machine External Dimensions: 1550mm Wide - 1178mm Depth - 1800mm High Internal Cavity Depth: 900 mm Door Width: 680mm 6 x Internal S/S trays - 805mm long - 295mm Wide - 9mm Depth 18Kw at 100amps 3 phase + neutral needed Weight approx. 500kg. Refurb Notes 1. Control system being fitted with a siemans PLC, controlled from a 4” siemans H.M.I. 2. Applicator structural strengthening and seam welding of all joints. 3. Emergency stop safety systems to conform to U.K. safety standards. 4. Strengthen the main frame to enable the equipment to moved without damage. Nwjdpsyv H T Aofx Aprsk 5. Improve the Magnetron launch inputs to the cavity. 6. Fit serviceable covers on all Magnetron ports inside applicator cavity.

Condition: used, Year of construction: 2018, A manual shaft measuring device for measuring shafts and rotationally symmetrical workpieces and for determining various form, position, length and diameter parameters is offered. Measuring length: 1200mm, max. workpiece diameter: 200mm, max. workpiece weight: 50kg, measuring method: manual, software: PREMION measuring software, operating system: Windows 11. Equipment: PC with monitors, keyboard and mouse, manual length and diameter module, centering tips and additional measuring accessories, PC replaced and equipped with Windows 11. Weight: 250kg. An on-site inspection is possible. Nodpfxjzvgibs Aprswk