Bandsaw band grinder MA50

Pilous CTR-MA50

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2023 Rsdpfsxtgz Eex Akijch Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles Rcsdpok S Htxefx Akieh - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: used, machine/vehicle number: 1 284 066, Feed diameter: 200 mm Rcodpfx Ajcm Tgkskioh Through-hole: 50 mm Mounting, short taper according to DIN 55027: Size 6 Outer diameter of the clamping cylinder: 290 mm Overall height (clamping cylinder to the front of the chuck, without jaws): 150 mm pneumatically actuated

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 224 mm, spindle bore: 52 mm, turning diameter: 360 mm, turning diameter over bed slide: 360 mm, turning length: 1,000 mm, total length: 1,850 mm, total width: 700 mm, total height: 1,290 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 90 rpm, swing diameter over cross slide: 224 mm, metric thread diameter (max.): 10 mm, bed width: 188 mm, Turning diameter in gap: 52 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 90 rpm, type of input current: three-phase, overall weight: 650 kg, MTP CQ6236G×1000 / 360×1000 UNIVERSAL LATHE 2-AXIS SINO DIGITAL READOUT + REMOVABLE GAP BED The lathe is available immediately! Brand-new professional MTP CQ6236G×1000 universal lathe, designed for precision metalworking in workshops, tool rooms, production facilities and maintenance departments. The machine is suitable for external and internal turning, longitudinal and cross turning, taper turning, drilling, and cutting metric and imperial threads. The lathe is equipped with a SINO SDS2-3VA digital readout for two axes, providing continuous control of the carriage position and improved accuracy and repeatability. The heavy-duty 188 mm wide bed features induction-hardened guideways, ensuring high rigidity, stability and resistance to wear. The removable GAP BED allows machining of larger-diameter workpieces close to the spindle. The large 52 mm spindle bore enables machining of shafts and bar stock. The D1-4 spindle nose provides secure mounting of the chucks. TECHNICAL SPECIFICATIONS • Model: MTP CQ6236G×1000 • Swing over bed: 360 mm • Swing over cross slide: 224 mm • Distance between centers: 1000 mm • Bed width: 188 mm • Bed guideways: induction-hardened • Spindle bore: 52 mm • Spindle nose: D1-4 • Spindle speed range: 90–2000 rpm • Maximum tool size: 16 × 16 mm • Longitudinal feed range: 0.078–1.044 mm/rev • Cross feed range: 0.018–0.238 mm/rev • Metric thread range: 0.45–10 mm • Imperial thread range: 2.25–40 TPI • Tailstock quill diameter: 32 mm • Tailstock taper: MT4 • Main motor: 1.5 kW • Coolant pump: 0.1 kW • Work light: 24 V • Dimensions: 1850 × 700 × 1290 mm • Weight: 650 kg STANDARD EQUIPMENT • SINO SDS2-3VA digital readout – 2 axes, • 200 mm 3-jaw chuck, • 200 mm 4-jaw chuck, • fixed steady rest, • follow rest, • reducing sleeve, Rcodpfx Akeyrq Nxoieh • fixed center, • coolant system, • 24 V work light, • thread pitch indicator, • removable gap bed, • chuck guard and safety covers. SALES CONDITIONS • brand-new machine, • 12-month warranty, • warranty and post-warranty service, • CE declaration of conformity, • technical documentation in English, • transport to the customer can be arranged. Transport within Europe can be arranged for an additional fee. Delivery costs are calculated individually depending on the destination.

Condition: used, with mounted three-jaw chuck Redpoda I Rvsfx Akijch Table diameter: 200 mm Bore diameter: approx. 18 mm Overall height: 100 mm Total height with chuck: 165 mm Width: 270 mm Length: 320 mm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, saw blade diameter: 550 mm, grinding wheel diameter: 150 mm, total width: 1,200 mm, total length: 1,200 mm, total height: 1,250 mm, type of input current: three-phase, input current: 4 A, input frequency: 50 Hz, grinding spindle motor power: 1,900 W, input voltage: 400 V, overall weight: 220 kg, spindle speed (min.): 3,700 rpm, Equipment: rotational speed infinitely variable, Loroch SW 550 machine in good working condition, ready for operation. The machine is suitable for professional workshop use. - saw blade dia. from 100 - 550mm - suitable for HSS saw blades for wood and metal cutting. - HSS saw blades geomeries - A, B, BW, C - Water cooling - additional device for shaping band saw blades Rodpfxjy Sgqte Akioch - Manual in Czech language (but it is simple machine)

Condition: good (used), Carbide saw brazer VISCAT model BC500 Rcodsigv Ebopfx Akieh

Condition: used, thickness of jaw:160 mm dimensions of the machine ca.:0,4 x 0,2 x 0,17 m Redscxxq Ajpfx Akijch

Condition: used, Sharpening device for block band saws MA50, in very good condition, with frequency converter (FU). Rcsdpfxswzzfwj Akioh Price changes, errors, and typographical mistakes reserved.

Condition: used, Continuous Casting Machine Rsdpexixkwsfx Akiech