Used Load Turning Device for sale (40,567)

Condition: used, Year of construction: 2013, mobile turning device with hydraulic height and lateral displacement load capacity 8 x 150 tons component diameter 5,000 up to 12,000 mm several turning devices must be installed to weld the segments total load capacity 1,200 tons maximum steel support rollers *support rollers can be adjusted in three axes under load* - moving - roller axis:  + / - 50 mm - stroke - height adjustment: 0 bis 150 mm - thrust travel - cross adjustment: + / - 50 mm two height-adjustable drive units - type TR15 - M - year of construction 2010 load capacity 15,000 kg per roller roller diameter 559 mm - roller width 300 mm drive torque 2 x ca. M = 3,500 Nm connected load 3 KW per drive unit manual hydraulic roller feed rotational speed stepless 100 up to 2,000 mm/min by handheld remote control second drive unit can be operated by radio remote controle Lrodjt Run Iepfx Apmep The entire system is designed for transportation in nine 20ft containers for worldwide use. total weight of the plant approx. 130 to

Condition: ready for operation (used), adjustable Ljdpfjha Hhzex Apmjrp

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Motorized tank/boiler turning device with rail-mounted chassis Technical data: Lrjdpfxohcnhmj Apmjp - Total load capacity, driven + follower unit: 40,000 kg - Load capacity per tank/boiler turning device: 20,000 kg - Workpiece diameter: approx. 500 - 3,500 mm - Axle distance of the support rollers adjustable via trapezoidal screw spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with drive on both sides - Continuously adjustable rotational speed - Handheld remote control for forward and reverse rotation - Drive: 400 V - Both units are mounted on rail-mounted chassis - Space requirement, driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement, follower unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight, driven unit: approx. 2,500 kg - Weight, follower unit: approx. 1,800 kg

Year of construction: 1985, condition: good (used), machine/vehicle number: XXXX, Item No. 21392 Approximate technical data: - Total load capacity of driven and idler unit: 25,000 kg Lrodpfx Ajk Eatdepmjp - Load capacity per container device: 12,500 kg - Workpiece diameter (approx.): 500 - 4,000 mm - Adjustable center distance of support rollers - Roller diameter: 400 mm - Roller width: 120 mm - Infinitely adjustable rotational speed - Handheld remote control for forward and reverse operation - Drive: 400 V - Space requirement of driven unit (approx.): W 3500 x H 850 x D 1000 mm - Space requirement with idler unit (approx.): W 2700 x H 850 x D 800 mm - Weight of driven unit (approx.): 1,300 kg - Weight with idler unit (approx.): 900 kg

Year of construction: 1998, condition: good (used), Offer 23126 Technical data: - Total payload driven + travelling unit 20000 kg. - payload per container device 10000 kg - workpiece diameter approx. 500 - 3500 mm Lrsdsnwmt Ijpfx Apmep - center distance of the articulated support arms man. adjustable - Roll diameter 4 x per support arm 250 mm each - roller width 4 x each support arm 80 mm - infinitely variable turning speed approx. 100 - 1500 mm/min - manual remote control for Re- and Li.-run - drive 400 V - space requirement with running unit approx. W 1700 x H 1100 x D 1000 mm - space requirement with running unit approx. W 1700 x H 1100 x D 700 mm - Weight attached unit approx. 1400 kg - Weight with running unit approx. 1000 kg

Condition: refurbished (used), Year of construction: 1990, functionality: unexamined, Pattern turning device with height adjustment and electric feed motors. Height adjustment is electric. The price is for the machine as is. Optionally, we can also offer a complete overhaul. Ledpfex E Dbcex Apmorp

Condition: refurbished (used), Index ER 25 Longitudinal turning attachment GT 2351.1300 3 units in stock. Lodpfx Apofc Rmcomsrp

Year of construction: 2017, condition: excellent (used), I sell the turning device AUTOMATICA DVPGP. Year 2017. Lrodpfew Am Ndox Apmjp One side feeding suitable for line. Element width up to 1400mm Total length 4500mm Available immediately. Ready for work, possible to test.

Year of construction: 1990, condition: excellent (used), I sell the turning device HOMAG TD31/25/13. Year 1990. One side feeding suitable for line. Element width 1250 + 1250mm Total length 6500mm Ledjktfvfspfx Apmjrp Available immediately. Ready for work, possible to test. With full manuals.

Condition: good (used), 107 USED Trolleys behind the bread and baguette inserters. - 13 trolleys with inserters: - 3 trolleys behind the inserters without belts FEEDING UNIT DIMENSIONS: - Width: 83 cm, - Length: 71 cm, - Canvas width: 77 cm. TROLLEY DIMENSIONS: - 90 x 72 cm, - Height: 213 cm. - Number of levels: 18 NOTE: Price for the entire set - 18 inserters + trolley: €700 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Lredpfsw A Rlpex Apmsp The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, Year of construction: 2026, load capacity: 10,000 kg, Column lifting and rotating device, 10 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set for synchronous operation or individually. Protec rotating device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically adjustable (at extra cost). Lsdpfjwtq Dtjx Apmerp Lifting capacity 10,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Speed: 0.5 RPM. Diameter of clamping plate: 900 mm. Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).

Condition: good (used), load capacity: 3,000 kg, Protec Reiss welding rotator, optionally with a perforated table, size as desired. 360° rotation. Adjustable axis. Can be used without a perforated table for customer-specific parts or with a perforated table. Table height, top surface: 1.16 m. We have several of these rotators in stock. Lsdpfx Aoziyh Dopmorp Additional cost for a new perforated table: €2,600 (2.0 x 1.0 x 0.2 m).

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Lrodouprqwopfx Apmsp Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Column lift turning device, 10-ton load capacity, available as a set or individually 2 sides powered Machine offered as a synchronized set or individually Protec turning device / positioner Syncrolift Double column, wireless and manual hand remote control Column adjustment electrically driven on both sides Load capacity 10,000 kg, 360° rotation Minimum working height: 800 mm Maximum working height: 1700 mm Speed: 0.5 rpm Clamping plate diameter: 900 mm Rotating drive: 2 x 2.2 kW Torque: 18,950 Nm Machine is also available individually as Mono model (more affordable) Optional with articulated flange (Cardan flange) Lsdpfowtxxrex Apmsrp

Condition: new, Year of construction: 2025, load capacity: 500 kg, 3-Axis Rotation and Tilting Positioner – 500, 1000, 2000, 3000 kg Load Capacity, Clamping Plate Diameter 0.5, 0.65, 0.8, 1.0 meters HDL 500: - Minimum height: 1000 mm - Maximum height: 1500 mm - Clamping plate diameter: 500 mm - Reach radius: 800 mm (cantilever) - Speed: 0.1 – 1 rpm These positioners have proven themselves in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in the aerospace and energy sectors. They are suitable for welding, assembly, machining, and more. Lrjdpfjulaxbjx Apmep With their stable and robust construction, flexible three-axis positioning (including overhead), and easy operation, they facilitate welding, assembly, and handling of large workpieces. - Faster production and increased productivity - Optimal positioning of the workpiece improves welding quality and enables higher deposition rates - Enhanced safety by significantly reducing dangerous crane handling - Simultaneous positioning along up to three axes without cumbersome re-clamping - Easy and ergonomic operation protects and relieves the operator - Flexibility thanks to modular adaptability and custom configurations Basic Principle: Due to the arrangement of the swivel arm rotation axis above the clamping plate, the arm acts as a counterweight to the workpiece. As a result, these machines are significantly more powerful than tilt rotary tables or tilt-rotational positioners. This principle allows handling of the specified loads in any position. Thanks to the endless rotation of two axes and additional height adjustment, all workpiece positions (including overhead) are possible. Table rotation speed is continuously adjustable from 0.1 to 1.0 rpm; from 2000 kg load capacity, 0.05 to 0.6 rpm. Supplied with wireless remote control. - Rotation range: 360° continuous - Swivel range: 360° continuous - Lift: 1000 – 1500 mm; from 2 tons load capacity: 1250 – 2000 mm - Arm outreach up to 1000 kg: 1 meter; from 2000 kg: 1.5 meters

Year of construction: 2023, condition: used, Optimas joint-filling device for paving stones (for wheel loader attachment) Year of manufacture: 2023 USED* Lrjdpfx Apjw Hyprjmjp Good condition. Price ex works: On request. The Optimas joint filling device for wheel loaders is ideal for sweeping in joint material into paving joints on medium and large paving surfaces. The photos are for illustrative purposes only and do not show the products offered for sale. A general product description (including photos/application videos) and technical data can be found on our website. If interested, please feel free to contact us by phone or email at any time.

Condition: used, Year of construction: 1999, Year: 1999 Condition: functional Technical specification: - Maximum sheet format: 1120 × 780 mm - Minimum sheet format: 400 × 400 mm - Layer height: 40 to 165 mm - Maximum stack height: 1300 mm - Load capacity: 200 kg - Operating air pressure: 6–8 bar - Electrical power consumption: 1.2 kVA Ljdpfx Apjy Rqd Uemsrp POLAR Mohr Transomat TR 130 EL-4 The POLAR Mohr Transomat TR 130 EL-4 is an automatic unloading and stacking device designed for operation with high-speed paper cutting machines manufactured by POLAR Mohr. The unit automatically removes cut paper layers from the unloading table of the cutter and places them onto a pallet. This reduces manual handling, shortens auxiliary operating time, and improves the continuity and productivity of the cutting process. Operating principle After completion of the cutting cycle, the cut layer is transferred into the working area of the unit. The handling mechanism grips the layer, transports it, and places it accurately onto the pallet. The system includes a movable pallet tip which helps maintain precise alignment of the stack.

Condition: excellent (used), Year of construction: 2007, AMADA LKI MP 300 LOAD UNLOAD AUTOMATION Year 2007 Lrodpfsyylqbsx Apmep LKI MP 300M automatic sheet loader / manipulator with 3000mm x 1500mm sheet capacity.

Condition: good (used), Image processing control unit, camera control Lrjdpfxoxvp S Eo Apmop -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

Condition: used, Year of construction: 2020, Orangeworks Stainless Steel Mixer Tank Qty 2 in stock Capacity 500 LTS Load cells Lrjdpfx Ajwq Sz Ujpmjp Mixer Ancillary equipment included

Condition: good (used), Rapid Load 12 Bar feeder Bar Loader Turn diameter bed: mm Turn diameter support: mm Passage: 6-80mm Turning length: 150-1215mm X axis: mm Y-axis: mm Z-axis: mm Turning speed: - Rev/min Cone: Longitudinal displacement drilling head (X axis): mm Arm travel height (Y axis): mm Min distance column -- drilling spindle (X axis): mm Max distance column -- drilling spindle (X axis): mm Spindle diameter: mm Max drilling depth: mm Max drilling depth: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation available Location: Hamont-Achel, Belgium Rapid Load 12 Bar feeder Bar Loader Bed turning diameter: mm Support turning diameter: mm Throughput: 6-80mm Turning length: 150-1215mm X-axis: mm Y-axis: mm Z-axis: mm Speed: Rpm Taper: Drill head longitudinal displacement (X-axis): mm Arm height displacement (Y-axis): mm Min distance column -- drill spindle (X-axis): mm Max distance column -- drill spindle (X-axis): mm Spindle diameter: mm Max drilling depth: mm Max clamping: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation present Location: Hamont-Achel, Belgium Rapid Load 12 Stangenlader Bettdrehdurchmesser: mm Drehdurchmesserunterstützung: mm Opening range: 6-80 mm Drehlänge: 150-1215 mm X axis: mm Y-axis: mm Z-axis: mm Speed: - U/min Cone: Längsverschiebung des Bohrkopfes (X-Achse): mm Armhöhenverschiebung (Y axis): mm Lredpfxsuhznbo Apmjp Minimum distance between sleeve and drilling spindle (X axis): mm Maximal distance between module and drilling spindle (X axis): mm Spindle diameter: mm Max. Drilling depth: mm Maximal machining wall: x mm Bettmaße: x mm Schnittlänge: mm Schnittstärke: mm Steuerung: Fanuc Construction year: 1997 Betriebszeiten: Transportmaße: 166x60x105 cm (LxWxH) Documentation verfügbar Standort: Hamont-Achel, Belgium

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Ledpfxozcvx To Apmjrp Laser on time: approx. 45,500 hours Includes Loadmaster.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: X12199, turning length: 320 mm, turning diameter: 32 mm, overall weight: 2,580 kg, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning length: 320 mm Turning diameter: 32 mm MACHINE DETAILS Total weight: 2,850 kg EQUIPMENT Citizen C32-VIII (year of manufacture 2007) LNS Express 332 bar feeder Ljdpfxjzlqdzj Apmsrp Chip conveyor Parts conveyor belt

Condition: excellent (used), Year of construction: 2019, operating hours: 2,100 h, functionality: fully functional, turning length: 3,028 mm, turning diameter over cross slide: 690 mm, turning diameter: 650 mm, spindle bore: 166 mm, DOOSAN PUMA 5100 XLMB CNC LATHE FANUC CONTROL 32i B YEAR 11/2019 , INSTALLED 2020 SWING OVER BED 900 MM SWING OVER SADDLE 690 MM MAX TURNING LENGTH 3028 Lrodpfx Apjznu Dqsmjp MAX TURNING DIA 650 MM HYD CHUCK 550 MM DIA X 362 Z 3150 C 360 INDEXING 0.001 12 STATION TURRET BORING BAR 60 MM MAX RPM 1500 BAR CAPPACITY 166.37 MM TAILSTOCK - QUILL 120 DIA - NO 6 MT LIVE TOOLING SWARF CONVEYOR TOOL PRESETTER COOLANT SYSTEM HYD STEADY IS THERE BUT NOT FITTED TO MACHINE FULL LOAD 82 AMPS NETT WEIGHT 13.2 TON

Condition: excellent (used), Year of construction: 2024, 2024 Star SP-23 CNC Sliding Head Lathe With Fanuc Series Oi-TF Plus Control With FMB Turbo RS 3-38 Barfeeder Ljdpozn Nm Hefx Apmsrp Number Of Axes 7, Main Spindle (Headstock) 'Z1/C1', Main Spindle Platen 'X1/Y1, Sub Spindle 'X2/Z2/C2' Axis. Maximum Machining Ø23mm. Headstock Stroke 205mm/50mm (NGB). Maximum Main Spindle Speed 10,000rpm (3.7kW Motor). Main Spindle Tooling: Turning Tool 8 Tools at 12mm SQ, Drilling Arm Sleeve Holder Capacity 5 x Ø22MM Sleeves (ER16), Power Driven Tool Positions 2 + 5 Modular Stations. Maximum Driven Tool Speed 8,000rpm. Sub Spindle Maximum Chucking at 23mm. Maximum Main Spindle Speed 10,000rpm (2.2kW Motor). Sub Spindle Tooling: Back-Working Platen Positions 4, Maximum Drill Sleeve Capacity ER20, Power Driven Tool Positions 4 (ER16), Maximum Driven Tool Speed 8,000rpm. Barfeeder Length 4,280mm. S/No. 668 (2024). With Coolant System, LNS Coolant System, Firetrace Fire Suppressor, Filtermist Mist Extraction Unit, Parts Conveyor, Signal Tower, Toolkit, Assorted Tooling (Collets, Connectors) . Weight 2,250kg.