Used Kreissaege Feed for sale (14,557)

Condition: used, Single-column eccentric press EBU Type 75 SKU Gsdjdzqltjpfx Aa Rskd Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Triangular belt sander Gjdpfxsulxhzj Aa Rjkd

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 12150 € Gksdpfswkvm Ijx Aa Rjd 233.28 € 0.4 - 2 mm 100 mm 200 mm² 63 mm 150 m/min 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,--

Condition: used, Year of construction: 1986, operating hours: 10,421 h, machine/vehicle number: L087, 026/0001 Engine number: 702 0393 Type: F5L 912 If interested, please contact Mr. Berger by email. Gedpfxewrmqgo Aa Rokd

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21513 Specifications: Unknown year Lister engine Worn belts Feed hopper Ready for delivery Description:Finlay Hydrascreen screener with feed hopper.There are worn belts on the screener (see pictures)Ready for delivery. Godpfx Aexl Ravoa Rskd Own weight: Model: Finlay Hydrascreen sikteverk m/ matekasse

Condition: new, Year of construction: 2025, functionality: fully functional, number of straightening rollers: 7, coil weight: 6,000 kg, coil outer diameter: 1,600 mm, coil inner diameter: 508 mm, conveyor belt thickness: 6 mm, number of feed rollers: 2, conveyor belt width: 600 mm, 6x600 mm Press Feed Line General Specifications Min. and max. sheet width: 120-600 mm, Min. and max. sheet thickness: 0.6-6.0 mm, Gksdpfx Aaert U R Ss Rod 6-ton unwinder Components: Siemens, Hydac, Wattdrive, SKF, Sick, Festo. Price includes: feed line, die recognition system, safety fencing, transport to your location, installation and integration with the press, process commissioning, operator training, exceptional customer service, warranty and post-warranty service throughout Poland, first inspection after one year – free of charge, 24-month warranty on the entire line, attractive purchase terms, leasing financing available

Condition: used, Double column eccentric punching press BLEMA Gotha type PEZ 160-50 MHSY-ES Eccentric press with roller feed ALBA Machine no. No. 88151005 Year of construction 1988 / 92 Pressure force 160 ton. Frame width 970 mm Stand width sideways 560 mm Table size 900 x 900 mm ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/min. Belt width in roller feed max. 400 mm Motor power approx. 15 kW Mains connection 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - ram weight compensation cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch/brake combination - Central oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Press and feed control cabinets, together on one platform, adjacent Platform dimensions 3400 x 2250 mm, height without feet 2950 mm Width of the press without feed 2100 mm Depth of the press with drive motor 2300 mm Overall height of the press 4150 mm Weight of punching press approx. 18 tons. For transportation, the drive motor is removed and the machine is placed on its face. In addition: NC roll feed straightening machine ALBA type GGVHY400 Apparatus no. 1405 and 1406, order no. 910708 (year of manufacture 1992) - ALBA PSS 300 feed control - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Belt thickness at 400 mm width max. 3 mm - Belt thickness for 300 mm width max. 4 mm - Belt cross-section max. 1200 mm2 - Roller drive hydraulically controlled by the feed - Height-adjustable feed unit on the press to adjust the material infeed height - Hydraulic unit opposite - Drag straightener with hydraulic opening and closing Gedpjdzqlvofx Aa Rokd Weight of the complete system approx. 24 tons Space required for transport a mega trailer with an internal height of 3 meters and a loading length of 13.6 meters good condition

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw Godpfx Aohfufgja Rekd -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 29990 € 572.81 € 0.4 - 3.5 mm 200 mm 700 mm² 80 mm 75 m/min 10 m/s² 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7" colour touchscreen SIEMENS 2 driven rolls Gsdpjwirqmofx Aa Rokd OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,--

Condition: new, Year of construction: 2015, Factory-new machine, has only been used for test runs, condition is as new. TECHNICAL DESCRIPTION The DIGIT MAGGI throughfeed drilling machine is an automatic multi-spindle throughfeed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL SPECIFICATIONS Number of horizontal heads: 2 Number of vertical heads: 6 Minimum distance between vertical heads: 165 mm Minimum distance between horizontal heads: 320 mm Distance between spindles: 32 mm Number of spindles in horizontal head (left red - right black): 23 (11 - 12) Gkedpfxexd Ruwj Aa Rjd Number of spindles in vertical head (left red - right black): 11 (5 - 6) Maximum vertical drilling depth: 55 mm Maximum horizontal drilling depth: 65 mm Maximum workpiece dimensions: 2800 x 870 x 50 mm Minimum workpiece dimensions: 250 x 150 x 12 mm Number of motors: 12 Horizontal head motor power: 2 HP (1.5 kW) Vertical head motor power: 1.5 HP (1.1 kW) Number of clamps: 10 Loader feed speed: 57 m/min Working air pressure: 6–8 bar Standard air consumption: 60 l/cycle Maximum clamp height above worktable: 75 mm Overall dimensions: 4150 x 1600 x 1800 mm Worktable height: 950 mm Packaging dimensions: 4300 x 1950 x height 1900 mm

Year of construction: 2004, condition: used, Ottevanger C5 Containerized Feed mill Automated grinding-mixing line with a capacity of about 5 t/h. Includes the following components, among others. - 55kW Hammer mill 650-375 - 11kW 1000L Mixer PM1000 - Silos Godpsq Hr Rzjfx Aa Rskd - Bucket weigher - Dosing screws - Elevators - bunkers - Switchgear cabinets

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Gsdpfx Aaexnpx Ne Rokd

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Godpfx Aaefx Hyfs Rjkd Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: good (used), Hacker feed roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Feed roller: serrated -Roll diameter: 270 mm -Transport roller width: 626 mm Gksdpfxedl E Iij Aa Rsd -Total length: 626 mm -Shaft mount: 80 mm -Quantity: 1x piece available -Weight: 137 kg

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 29460 € 562.69 € 0.4 - 4 mm 100 mm 400 mm² 80 mm 75 m/min 10 m/s² 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment Gkjdpfxjwiri Nj Aa Rod servo drive and control SIEMENS 7" colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,--

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter ProfiPress 2500 3HF LZ Year of production: 2009 Technical condition: very good Weinig Dimter ProfiPress 2500 3HF LZ is a high frequency wood gluing press designed for the production of laminated panels and high-strength wooden components. The machine is engineered for efficient and precise length and width bonding using high-frequency (HF) technology. Key Features and Benefits: ✅ High-Frequency (HF) Technology – ensures rapid glue curing, reducing pressing time and increasing production efficiency. ✅ Robust Construction – made from high-quality components, ensuring durability and reliability. ✅ Automated Process – can be integrated into production lines for optimized workflow and enhanced efficiency. ✅ Precise Pressure Adjustment – guarantees uniform quality of the finished product. ✅ Versatility – ideal for manufacturing laminated panels, structural beams, stair treads, countertops, and other wooden elements. Technical Specifications: • Maximum Pressing Length: 2500 mm • Pressing Technology: High-Frequency (HF) • Number of Pressure Sections: 3HF (three high-frequency sections) • Pressure System: Hydraulic with precise pressure control • Application: Wide and long gluing • Glue Type: Hot-melt adhesives (e.g., PVAc, PU) compatible with HF technology • Control Options: User-friendly interface and automated gluing cycle programming • Energy Consumption: Efficient power usage for intensive production • Safety System: Sensors and protective covers compliant with CE standards Dimensions of Processed Wood: • Wood width, uniform widths for filling: 30 - 150 mm, usually 120 mm Gjdpfx Aaovyu Iqe Rokd • Wood thickness: 7 - 45 mm, usually 24 mm • Wood length (min./max.): 200 - 2400 mm, usually 1250 mm When using certain additional devices, the minimum wood length must be adjusted accordingly, or a guide system must be used. Specific Pressing Pressure: 18 - 160 kN Type of Wood: Softwood / Hardwood Air Supply Data: • R1" / 1/2" - height approx. 600 mm - oil-free • Airflow: approx. 500 Nl/min (press / glue application) • Dust extraction: approx. 8 bar (extraction system) Electrical Connection Data: • (1) Press, mechanism → 14 kW • (1) High-Frequency Generator (HF) → 42 kW • Power supply voltage: 400V / 50Hz • Weight of the press: 7000 kg (position 5) • Cable channel 300 x 150 mm, recessed in the floor or flush-mounted, with a control cabinet integrated into the machine structure. Foundation: • Concrete slab covering the entire delivery area, minimum thickness 200 mm, compacted and reinforced from both top and bottom. • Static load of the press → see the diagram on the left. • Maximum static load per foot: approx. 150 N/cm² • Any foundation recesses, elevations, or reinforcements must be provided by the customer. • This also applies to platforms, stairs, walkways, and supply lines for pneumatics, electricity, and telephone systems. Working height (AH): 940 mm Weinig Dimter ProfiPress 2500 3HF LZ is a professional solution for manufacturing plants looking for an efficient and precise wood gluing machine. Thanks to HF technology, it significantly reduces the production cycle time while improving the quality of finished products. We also offer professional disassembly, installation, commissioning, employee training on machine operation, and service support.

Condition: good (used), Year of construction: 1998, Chipper with horizontal feed and conveyor belt in standby mode. Slow-running and therefore very quiet. Max width: 300 mm. Max height: approx. 30 mm. Motor: 18.5 kW, 115 rpm. Ideal for use next to a panel saw for long strips. Gsdpfx Aasgmn Amo Rokd

Condition: used, Year of construction: 1995, functionality: fully functional, For sale: Hundegger P10 machine, in continuous use. The machine was purchased used, directly from the manufacturer in Germany. Ready for further operation. Possibility to inspect the machine live during operation. Gkjdpfx Asxlla Dsa Rjd

Condition: reconditioned (used), Ribbon mixer Machine has been overhauled Capacity: liters Gkedpfx Aowygcloa Red Motor power: 3kW, 23 rpm Material: Steel

Year of construction: 2024, condition: like new (used), functionality: fully functional, The screws are like new, as they have not been used in production but only for a test run. Gksdsw Nplaspfx Aa Rjd

Year of construction: 2018, condition: new, neu Gjdjwiqtmspfx Aa Rekd 2018 070033 prompt, Zwischenverkauf v Türkei 20310 € 389.95 € 1 0.6 - 4 mm 300 mm 900 mm² 80 mm 10 Nm 2.62 kW 1000 mm 800 mm 1400 mm 330 kg DEMO MACHINE helical gear box Wattdrive pneumatic equipment Festo control SCHNEIDER with touchscreen 2 driven rolls remote service module hand wheel Euchner operating manual in German with EC conformity declaration

Condition: good (used), WEILER COMMODOR L&Z Lathe - Turning diameter: 180 mm - Turning length: 1000 mm - Bar passage: 56 mm - Speed range: 25–2000 rpm - Thread cutting: metric / inch etc. - Automatic longitudinal / face feeds Gsdpfx Aaew Nnvws Rekd - Tailstock: MK 4 - 3-jaw chuck: 250 mm - Electric chuck guard - Multifix with insert - Coolant unit - Chip guard rear wall - Machine documentation - Good working condition Dimensions: LxWxH 2.5x1.3x1.7 m / Weight 1500 kg Subject to errors / input mistakes.

Year of construction: 2012, condition: excellent (used), 1 used feed water tank ----- cylindrical, horizontal on saddle feet, insulated with degaser capacity approx. : 5.900 ltr max. allow. work. pressure : 0 / + 6 bar max. allow. work. temp. : 0 / + 200°C Gedjmfq Rkjpfx Aa Rjkd year of construction : 2012

Condition: excellent (used), Year of construction: 2020, HPPA through-feed press manufactured by Famad Paczków, year of manufacture 2020. Gsdpfxovla A De Aa Rjkd The press is designed for through-feed gluing of door packs, MDF boards, plywood, veneer, etc. It features a pneumatically lifted chain conveyor for loading and unloading, and can operate independently or as part of a production line.

Condition: good (used), Complete feed of gang saw Esterer HDN 600 was recently removed due to conversion to frequency-controlled feed. Gsdpfxjr Hmhne Aa Rskd immediately available Location: Austria, near Wels