Used Kreissaege Feed for sale (14,557)

Condition: used, Hydraulic pump: * Oil volume: 160L, * Motor: EMOD type 132S/2, 5.5 kW, Gearbox: * Lenze type 11.431.31.25.3 * Motor: LS 160 L-4, 15kW. Gkedpfx Aelf Iz Roa Rod

Condition: new, Motor power 1,1/2,2 kW belt opening 130 mm belt dimensions 350x32x2,5 weight 220 kg Speed 30/60 1/min. Cutting surface 0° 115 / 100 / 130x80 Cutting surface 45° right 100 / 85 / 90x80 Cutting surface 45° left 75 / 75 / 90x65 Cutting surface 60° right Cutting surface 60° left Description Manual crosscut saw for miter cuts from 45° right to 45° left, with high sawing power. Gedpocgrkyofx Aa Rskd Construction in sturdy cast iron, practical and safe for every cut. FALCON 352 is available in bench version or on stand (accessories). The machine is equipped with a two-speed - three-phase motor. On request, the machine is supplied with pneumatic vice (FALCON 352 MA, when the head is lowered, the vice closes automatically) This version is always supplied with stand. Basic equipment: clutch adjustable from the outside Blocking device with vice Sliding on prismatic guide with adjustable bar Fixed clamping of the vice with axial adjustment for clamping the workpiece in the immediate vicinity of the cutting line. Adjustable fixing of the degasser, made entirely of steel. Electric 48 V coolant pump for cooling and lubrication of the saw blade. Double spring for the return of the to fix the loading platform. The machine can be lifted. Endless worm shaft mounted on pair of bearings. Saw blade holding shaft mounted on off-center punch. 2 speeds 30 and 60 rpm. Vise opening 130 mm Machine is supplied without saw blade. Electrical equipment: Electrical control panel marked cable connections main safety switch provided for padlock Emergency stop device Phase failure protection Speed changeover switch Thermal magnetic protection Undervoltage release Motor with IP 54 protection Low voltage system 24 Volt Electric coolant pump 48 V Motor 1,1/2,2 kW - 400 Volt For further technical data please refer to the attached PDF document.

Condition: used, No. 10012 Feed hopper Rema Used Gkodsv N E Iyepfx Aa Red Metal plate conveyor / steel plate belt Defective gearbox (Bonfiglioli) Drive power 15 kW Belt width 2000 mm Axis length 10000 mm The system has been out of operation since the end of January 2025 due to gearbox damage Without output conveyor Transport dimensions approx. 15000 x 3000 x 4000 / 5500 mm LWH Sale on behalf of customer, ex location near 78628 Rottweil, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2016, 1 Up-stroke angle cross- cutting saw model UKA 600 with pneumatic stroke and clamping device Saw unit mounted on rotating table of diameter : 980 mm Saw blade diameter : 600 mm Cutting capacity : 165 x 240 mm 90 degrees Maximum cutting height : 165 mm at the Fence and 175 mm Diameter (at 90 degrees) for round material Cutting angles : 30 – 90 – 30 degrees 45 – 90 – 45 degrees with automatic function Motor power : 5.5 Kw Voltage : 400 Volt 50 Hz Working height : 920 mm 1 Tiger Stop 7.5 Automatic Stop and pusher Total length : 7.95 meter Working length : 7.35 meter Net working length (automatic saw) : 6 meter Voltage : 220 Volt 50 Hz Motor power : 0,45 Kw Feed speed : maximum 40 m/min (Depends on load) Précision : +/- 0,4 mm as pusher. Infeed-table for TigerStop 6.8 Total length : 7.4 meters Table width : 325 mm 1 Outfeed / infeed table with side fence Gjdexivhaspfx Aa Rekd Length : 3.7 meter Width : 325 mm Right side pusher version (video for explanation purposes only) The machine is operated by push button for semi-automatic use or fully automatic for 90 degree angles controlled by the TigerStop. The rotation table is controlled by a Tigerstop Servo drive TigerDrive

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 60176, New pneumatic self feed drill unit with 2 signal transmitters and their holders Gjdpjv Tnh Rjfx Aa Rjkd good for drilling or milling Speed (r.p.m. no load): 32,000 rpm Stroke: 40 mm dashpot: 15 mm Motor power: 0.25 kW Total length: 10.63 In. Operating pressure: 5.5 bar lubricated compressed air Suitable for collets (not included) with diameters of 3 to 8 mm Included are 2 signal transmitters (24 V DC, M8 connector, 5 m cable) and holders Other versions (speeds, stroke, etc.) are available upon request.

Year of construction: 2005, condition: excellent (used), We offer a used dosing hopper with internal dosing belt and internal conveying rake: Dimensions: L: 3.90 m, W: 0.86 m, H: 1.50 m. Belt width: 0.75 m. Including an associated conveyor belt: Length: 4.20 m, belt width: 0.50 m. Very good condition. Gsdsiuxucepfx Aa Rskd Technical details: See photos.

Condition: used, Overall length: 266 mm overall length: 266 mm D: 35 mm Available: 1 * Total length: 266mm, Gksdjlkciwopfx Aa Rod *D=35mm, * Available: 1st

Condition: new, High quality pillar drilling machine with a top equipment. FLOTT SB 30 MV Plus R2 (230.506) Standard equipment: - Main switch - Thread cutting device - Control panel with OLED display - Robust, high quality drill head hood with ergonomically inclined front - LED illumination - Quickly adjustable and ergonomic drill depth stop - Infinitely variable speed control via central rotary knob - Emergency stop button - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with CEE plug - 3 years warranty for one-shift operation - Mechanical feed of Z-axis incl. electromagnetic clutch for (3) feed speeds - Drilling cross with pushbutton (on/off) for feed rate - In tapping mode: right-left release via drill cross pushbutton or optional foot switch Speed versions: Art.No.: 230.505 R1 (0-1.000 1/min, 100 Nm) Art.No.: 230.506 R2 (0-1.600 1/min, 70 Nm) Art.no.: 230.507 R3 (0-4.000 1/min, 200 Nm) Technical data: Continuous/normal drilling capacity (mm): R1: 27/32 (in E335/ST60) (100) / R2: 25/30 (in E335/ST60) (70) / R3: 30/35 (in E335/ST60) (200). Tapping capacity (pitch dependent): R1: M24x3 / R2: M20x2.5 / R3: M30x3.5 Spindle: MK III Gkjdpfx Aoi Hqbcoa Red drilling depth (mm): 125 throat depth (mm): 300 column diameter (mm): 125 Usable working area (W x L) (mm): 590 x 450 Speed display: Digital Drilling depth display: Digital Drilling depth stop: with fine adjustment Table height adjustment: with rack spindle/working surface (mm): 150-700 machine dimension without packing (mm): 610 x 900 x 1.980 machine dimension with packing (mm): 670 x 1100 x 2140 Motor current 400V with frequency converter (kW): 3,0 Spindle speeds stepless (1/min): R1: 0-1000 / R2: 0-1600 / R3: 0-4000 feed (mm/rev): 0,10/0,16/0,25 weight (kg): 390 Note: For all other models, please feel free to contact us.

Condition: excellent (used), Bandsaw with feed MEBER SR - after the technical review - in good condition - Italian production TECHNICAL PARAMETERS: 4 kW main engine wheel diameter 800 mm cutting height 420 mm maximum width of the cut material 780 mm cutting width at the ruler of 575 mm cutting width with rolls 195 mm maximum width of the material cut with a feed 355 mm cutting band width max 40 mm feed speed adjustable on the inverter feed speed range 0-12.5 m / min height of the feed roller 140 mm pneumatic feed pressure Gjdsfwl Uaspfx Aa Rekd upper and lower belt guides 0.75 kW feed motor stub diameter 100 mm dimensions (length / width / height) 260 x 165 x 115 cm weight 700 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5500x4000x2250 mm Weight 8000 kg Gedpfx Ajv A Hlmea Rskd Total power requirement 45 kw

Condition: excellent (used), Year of construction: 2013, Manufacturer: BACCI Model: EVO JET Machine type: CNC machining center Year of manufacture: 2013 Technical data: X working area: 3400 mm Y working area: 200 mm Z working area: 100 mm Main motor: 7.5 kW 4 axes Gsdpjrur Tisfx Aa Rjkd 5 axes 5-axis spindle CNC self-adjusting work tables Special material clamping system Pinion chuck OSAI machine control Electric cabinet cooling Independent Z axes - 2 Number of milling spindles - 4 Number of revolutions max / min: 24 000 Construction with outrigger 2 tables Loading: conveyor belt External transport: conveyor roller Enclosed cabin CE mark

Condition: excellent (used), Offered is a used feed hopper with pre-screening. Manufacturer: Haver & Boecker. Gjdev N H Hdopfx Aa Rjkd Year of manufacture: 1995. Type: UF 1200x3650. Very good condition, fully functional.

Condition: used, Year of construction: 2001, functionality: fully functional, Gassner closure feeder with pneumatic lifting station and blower Gksdpfeww Hvmjx Aa Red Filter unit for air transport with 8 m piping

Condition: new, MAXION UNIMAX 3 AV pillar drilling machine Modern, precise production drilling machine based on the proven UNIMAX3 concept, with infinitely variable feed drive, automatic tool ejector and chip breaking control as standard, reversing switch right/left rotation. Feed rate, speed and drilling depth are shown in the display and the drilling depth is programmed. Technical data: Continuous drilling capacity in St 60 25 mm Drilling capacity normal 30 mm Tapping capacity M 20 spindle MK 3 drilling depth 125 mm throat 260 mm distance spindle/table 90 to 840 mm table surface 500 x 400 mm column diameter 110 mm total height 1.900 mm weight 280 kg motor power 0,8/1,5 kW Gsdpfx Aegv I U Sja Rskd Spindle speed infinitely variable range A 80-1.440 rpm Range B 180-3,200 rpm details see data sheet enclosed - please ask for further models

Condition: excellent (used), Feed table for a four-sided planer TECHNICAL SPECIFICATIONS: max. workpiece length 5000 mm min. workpiece length 400 mm max. workpiece width 330 mm max. element thickness 120 mm roller motor power 1.1 kW 1.5 kW chain motor power adjustable feed on the inverter 7 guide chains 13 steel feed rollers roll diameter 90 mm height of the rollers from the base 820 mm Gsdpfjhtq Amsx Aa Rjkd pneumatic pressure height of the rollers from the base 820 mm dimensions (length / width / height) 600/240/155 cm weight ~ 1500 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 8500x1800x2150 mm Weight 6000 kg Gjdpfxov A Hkce Aa Rjkd Total power requirement 10 kw

Year of construction: 2001, condition: good (used), grav. feed unit and mixer KOCH Graviko 25 liter year: 2001 Gksdshm Suxepfx Aa Red price: 4.200 € contact: Mr. Rainer Eckerle

Year of construction: 2004, condition: refurbished (used), Precision feed for tapes up to approx. 100mm to 2mm Gkodpfxeg Iiuxs Aa Rjd Feed force 400 N Repeat accuracy +/- 0.04 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 60 kg Total power requirement 0,4 kw Gkodevz E Ukopfx Aa Red

Year of construction: 2008, condition: good (used), grav. feed unit and mixer KOCH Graviko GK 60 2x gravim, 60 kg/h , year: 2008, price: 5.600 €, contact: Mr. Rainer Eckerle Gsdpod E N N Ujfx Aa Rekd

Year of construction: 2023, condition: like new (used), width 600 mm accuracy 0,04 mm force max 3000N Gksdpfxslczm Io Aa Rsd waranty 2 Years

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 35 kg Total power requirement 0,2 kw Gjdpfx Aasvz E Nno Rekd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 57 kg Gkodpfevz E I Djx Aa Red Total power requirement 0,4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 61 kg Total power requirement 0,75 kw Gkodjvz Ev Uepfx Aa Rod

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 65 kg Gedpfxsvz Emme Aa Rjkd Total power requirement 0,75 kw