Used Knee And Column Milling Machine for sale (89,331)

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 3, total height: 1,800 mm, total width: 500 mm, total length: 600 mm, table width: 500 mm, table length: 355 mm, spindle speed (max.): 3,020 rpm, spindle speed (min.): 100 rpm, type of input current: three-phase, Equipment: type plate available, 3 Phase 380V, 2 speed motor is running fine! Geared head with 8 speeds. Spindle RPM adjustable from 100 up to 3020. MT3 spindle taper. Bodpoxl Hpajfx Abbsdk Tool ejector. Maximum drilling depth: 130 mm Table size: 500x355 mm Head & table height adjustable. Good working condition! Made in Sweden. Overall dimensions: 60x50x180 cm Contact us for shipping possibilities! € 1,850.00 EX VAT!

Condition: used, Year of construction: 2001, x-travel 4200 mm y-travel 2750 mm z-travel 1650 mm Control Fidia C20 total power requirement / kW weight of the machine ca. 40 t required space L9,5 x B5,9 x H6,4 m Handtmann NT 300 / 220 T: - Year of construction: 2001 - Traverse paths: X - axis approx. 4,200mm, Y - axis approx. 2,750mm, Z - axis approx. 1,650mm, °C axis approx. +/-275° and A axis +95° / -120° - Fixture space: approx. 3,000mm x approx.2,200mm x approx.980mm - Table size: 3,000mm x 2,200mm with T-slots in a 150mm grid - Table load: 1,000kg / m² table surface - Working and rapid traverse speed: max. 20m/min Bdjdeuddhcepfx Abbek - Controller: Fidia C20 - Spindle: HSK 63 from Fischer (Switzerland), 24,000 rpm (grease lubricated) - Spindle hours: 6,939 hours (as of 05/16/22) - Total hours: 76,793 hours (as of 05/16/22) - Tool changer: 2 tool magazines with 30 tool places each, max. - - Tool weight 4kg, max. tool diameter 80mm or Ø125mm if no two sister tool places, max. tool length 280mm cover plate pneumatic - Cooling: tool spray device with a container of 19.5 l, spray head with adjustable output 0.04 - max. 2.3l/h - Tool control: Blum Laser - Wireless probe: Manufacturer M&H, type 25.10, year of construction 2021 - Exchange ball screw X - axis 10.07.2018 - Telescope cover 26.02.2019 exchanged on one side Machine dimensions: Length approx. 9,500mm (without housing) Width approx. 5,900mm Height approx. 6,400mm (Z axis extended) Weight: approx. 40,000kg

Year of construction: 1981, condition: used, Radius/flush milling machine, edge milling machine, edge milling machine, molded part milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inner and outer radii -Built-in milling cutter: 30 ° -Dimensions: 1000/600/H1450 mm Bdjdpsb A Hfqefx Abbek -Weight: 60 kg

Condition: ready for operation (used), thread length: 3,000 mm, Thread milling and hobbing machine Maximum spindle bore: Ø 80 mm Bdsdjv Huihspfx Abbek Depending on the travel, max. Ø 250 mm and min. Ø 20 mm are possible. Machining length: 3000 mm With accessories: change gears, steady rest For further technical data, see the PDF file.

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. Bdjdpfx Abjw Al U Ejbjk For more information, please contact us.

Condition: used, Type: OPTIMAT F 13 Year of construction: 2001 Condition: function-tested, very good, second-hand - Workpiece thickness 16 to 55 mm - Workpiece width min. 30 mm - Inner radius min. 35 mm - Edge thickness max. 3 mm - 2 milling motors 0.4 kW - Suction connection 80 mm Bodpfxoud U Iys Abbodk

Condition: as good as new (ex-display), Year of construction: 2025, Spindle tilting: Yes, 0 to 45° Height adjustment: Electric / Position control Swivel adjustment: Electric / Position control Milling stop adjustment: Electric / Position control Bjdjwhuvcopfx Abbodk Milling jaw adjustment: Manual / Handwheel Height display: Digital display Swivel angle display: Digital display Milling stop display: Mechanical counter Aigner integral stop: Yes Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Weight: 655 kg

Condition: excellent (used), max. workpiece diameter 600 mm threading length 7000 mm max. module 8 / 12 min. module 1 swival range ° diameter of hob 63 - 140 mm spindle turning speed - stepless 45 - 450 U/min weight of the machine ca. 12,5 t dimensions of the machine ca. 9,0 x 2,0 x 2,2 m Condition: In good condition, checked and partially overhauled by a specialist. The existing milling head was replaced by an overhauled universal milling head. Bedpewgizdsfx Abbsdk Furnishing: Differential for inclined machining Automatic indexing device (indexing discs changeable!) For multi-wedge, multi-thread parts, then extensive bushings, support rollers and around 70 Change gears. Conversion of the milling head speed to a frequency converter with corresponding powerful motor is a great thing and saves a lot of set-up time. Equipment: Around 70 change gears, 3 bushing sticks of different sizes, around 20 Bushings, 2 roller mountings, 2 tips for direct mounting on the Clamping spindle, 350 mm chuck, 2 spare part disks.

Year of construction: 1989, condition: used, - workpiece thickness max. (mm): 55 - workpiece width min. (mm): 80 - Profile depth max. (mm): 80 Bodpfok E Hrbox Abbsdk - inner radius min. (mm): 10 - Edge material thickness max. (mm): 3 - depending on radius and edge material - milling motor: 0,5 kW, 27.000 rpm. - Electricity: 220 V - 1 Ph. - 50 Hz - Connection value (kW): 0,5 - Compressed air connection (bar): 6 - dimensions L x W x H (mm): 850 x 650 x 1430 - working table height (mm): 1000 - buffing unit: for processing thick PVC edges - Weight (kg): approx. 120

Condition: used, Year of construction: 1995, W A N D E R E R Model H 200 V/TNC 360 C Table size 1250 x 720 mm – Travels: X 1000 mm, Y transverse 500 mm – Max. distance from table to spindle (vertical reach 700 mm – max. reach from column face to spindle center – transverse 760 mm). Machine with automatic folding head for automatic swiveling from horizontal to vertical or vice versa – also available. Automatic tool clamping with SK 50 – Work area cabin – Electronic handwheel – Heidenhain 360-C contouring control with color graphics and electronic handwheel – Machine with approximately 30 cutter holders – Swiveling control panel, etc. 1 used, excellently preserved bed-type milling machine of very sturdy construction: The machine was overhauled in 1995 for *150,000.00 DM – the overhaul work included the complete restoration of the geometry to new machine accuracy and the conversion to TNC 360 contouring control. 8 mm infeed with cutter head is no problem! Numerous SK 50 holders – machine mounts, etc. Hand-scraped guideways in top quality. Bdsdpfob I Iqcox Abbjk

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot control Bodpfsigadlsx Abbodk 1200 x 800 mm suction nozzle 80 mm pneumatic connection cable + plug 16 A 1 set of operating tools 1 set of sensing rollers

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: M 73 175, feed length X-axis: 320 mm, feed length Y-axis: 60 mm, feed length Z-axis: 2,100 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 75 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 3,150 rpm, spindle speed (min.): 45 rpm, quill stroke: 160 mm, quill travel distance: 420 mm, quill diameter: 90 mm, position of the milling head: vertikal, type of input current: three-phase, table load: 3,000 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Wanderer CNC extruder screw milling machine Control: Siemens, type Sinumerik 3M/4C Swing diameter: 200 mm Workpiece length: 2,500 mm Drive power: 20 kW Tool holder: SK50 Workpiece clamping device: 3-jaw chuck (Forkardt F315) Bdjdpfxowbzvvo Abbek

Condition: as good as new (ex-display), Year of construction: 2024, Swivel spindle: Yes 0 to 45° Height adjustment: handwheel / electric Swivel adjustment: Handwheel / electric Milling jaw adjustment: manual Height display: Digital display Swivel angle display: Digital display Milling stop indicator: mech counter Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Bdedouzkxxspfx Abbjk Machine depth: 900mm Weight: 655kg

Condition: used, Year of construction: 1979, WANDERER TYPE:KFV2 X: 1200mm Y: 350mm Z: 450mm MADE IN GERMANY Bodpfx Asru A S Aebbodk

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Tilting Spindle Moulder MARTIN T25 Very good condition, the machine comes from a very small joinery workshop that was closed due to retirement. Everything works perfectly. All bearings and guides are in good condition. Year of manufacture: 1997. The fence on the moulder allows adjustment of the fence jaw depth, with fine adjustment and a mechanical counter; this makes it possible to perform trimming work, e.g. on a gluing profile. The entire fence can also be moved in depth using a handwheel and leadscrew, and a second mechanical counter allows for highly precise and quick settings. Equipped with spindle lock via lever. Chip extraction is excellent, with 2 extraction ports: 125 mm at the fence and 100 mm at the machine table. Comes with a 30 mm spindle, infinitely tiltable from -5° to 45°. The spindle tilt is electrically controlled with a highly accurate display. Features right/left rotation. Nationwide delivery and on-site demonstration within Germany by us for €220, so you have no risk when purchasing. Shipping to Austria and the rest of the EU possible on request. Large table opening up to 480 mm, reducible with various rings (enabling the use of cutters with very large diameters; also ensures safe operation with small cutters). Spindle speeds: 3000, 4500, 6000, and 9000 rpm. Spindle height adjustment is also electric, with a very precise display. The table is made of heavily ribbed grey cast iron. Exchangeable spindle (a 40 mm spindle can also be used). Very robust, durable construction – built for the heaviest milling operations; suitable for all milling tasks. Optimal power transmission via V-belt drive. Comes with manual/operating instructions. Includes 3-roller power feed HOLZ HER, type 1117. The power feed has right/left operation and 8 speeds. The feed rollers are individually mounted. The machine table is 1180 mm wide and 800 mm deep, plus 2 table extensions on the left and right (each 600 mm wide); there is also a pull-out support. Ready to use immediately. 380V, 5000W and 6000W thanks to 2 speed settings. Equipped with all necessary safety devices, motor brake and emergency stop. The machine is certified by the woodworkers’ employers’ liability insurance association and has a CE mark. The machine weighs approx. 1200 kg. With motor protection switch against overload. Professional machine, not DIY store quality. Bedjxy S Eiopfx Abbjdk Optimal, simple, fast and safe handling.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Bodpfx Ajxftqdsbbjdk Prototrak SMX CNC Control,

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Bdjdsxxb Rropfx Abbjk Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79003 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2003, Model: G50 x 1600 Year: 2003 Bodpfx Aboxphw Tjbsdk Radius of Arm: 1600mm Spindle Taper: MT5 Spindle Speeds: 25 – 2000 RPM Max. drilling capacity: 75mm iron / 50mm steel

Condition: used, Weighing and Bagging System, comprising of: - Bdsdpfxsxmhh He Abbok - Ishida Multihead Weigher (CCW-EM-214/30) - Ilapak Vegatronics VFFS Bagger (S/N: S977/00) with Zodiac printer - Hopper - Takeaway conveyor - Ishida metal detector checkweigher (DACS-W-012) - Gantry

Condition: new, Year of construction: 2025, functionality: fully functional, fuel type: hybrid, color: other, Equipment: cabin, The fixed sand washing and screening plant is an advanced system designed for the high-efficiency separation and cleaning of natural sand and gravel. Developed with CONSTMACH engineering, these plants can be customized according to different production capacities, final product sizes, and washing requirements. Thanks to the plant's modular design, it can be easily integrated into any project area with different layout plans. It offers flawless washing performance with options such as a high-vibration feed bunker, a washing nozzle vibrating screen, and a helical or bucket washer. The hydrocyclone system ensures maximum efficiency in separating fine material. Furthermore, thanks to the PLC-controlled automation system, all processes are managed from a single point, minimizing the margin of error. CONSTMACH stationary sand washing and screening plants are equipped with SIEMENS and SCHNEIDER brand electronic components, offering long-term use and high durability. With these features, they are an ideal solution for companies that want to maintain high quality standards in aggregate production. Stationary Washing and Screening Plant Technical Specifications Production Capacity: 100 – 250 t/h Maximum Feed Size: 200 mm Feed Height: 4.5 meters Main Configuration: Feed Bunker + Washing Nozzle Vibrating Screen + Helical Washer / Bucket Washer / Dewatering Screen and Hydrocyclone + Conveyor Belts Total Motor Power: Varies according to production capacity Electric Generator Requirement: Varies according to production capacity Weight: Varies according to production capacity Why Should You Choose CONSTMACH Stationary Washing and Screening Plants? CONSTMACH combines its long-standing engineering experience in washing and screening technologies with high quality standards. All systems provide long-term use with low maintenance costs thanks to their durable steel construction and energy-efficient motors. In addition, with project-based customization options, it offers full compliance with each customer's production goals. Thanks to its superior service network and fast spare parts supply, CONSTMACH plants preserve the value of your investment in the long term. What Does Constmach Do? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Bdedjxqai Rjpfx Abbek

Condition: used, Year of construction: 2019, functionality: fully functional, feed length X-axis: 787 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, spindle speed (max.): 5,000 rpm, workpiece weight (max.): 600 kg, The machine is in good technical condition, connected to power and can be tested. Bodpfxexxtmfj Abbedk

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Bjdpfxonxi Uuo Abbedk Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Condition: ready for operation (used), Can diameter range: 50 mm - 100 mm Can height range: 28mm - 120mm Capacity: up to 200 cans per minute Tooling for approx.: 73mm No. or seaming heads: 6 No. of filling pistons: 16 Single knive member separator Bjdpfxswnriae Abbjdk Driven lifters Siemens touchscreen

Condition: good (used), 1 x Syspal column lifter type 600/scb-1480 for 200 and 300 litre eurobins. Located Wiltshire. UKFM1- 6623 Bedovq N Duopfx Abbsdk

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Bdjdpfjnxi R Ujx Abbek Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting