Travelling column milling machine

DECKEL MAHO DMF 220 Linear

Condition: used, Year of construction: 2002, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control 840 D Powerline ShopMill Siemens Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper SK 40 internal coolant system feed 40 bar work table: table surface area 2.600 x 600 mm max. table load 2.200 kg number of T-slots 6 T-slot - width 18 H7 mm T-slot - distance 100 mm Tool-Presetter: number of toolpositions 30 pos. max. tool length 300 mm max. tool weight 6 kg max. tool diameter 80 / 125 mm Todstqmr Ropfx Akiod feeds: feed speeds 20.000 mm/min input unit 0,01 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min measuring system Resolution 0,001 mm total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 6,0 x 3,7 x 2,9 m CNC - Machining Center Vertical DECKEL MAHO - DMF 220 linear - from individual part production (aluminium, brass and stainless steel) - incl. workroom wall - M26 function (switching to blown air through spindle center) - new ball screw Z-axis incl. bearing (April 2015) - new milling spindle (2016) - Spindle hours: ca. 11,966 h - WITHOUT vices

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm Tedpsw T Tcwefx Akisd TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: excellent (used), Year of construction: 2004, Deckel Maho 3 axis vertical machining center in good condition with 15781 spindle hours. Well maintained by DMG services in the Netherlands. Immediately available for delivery. Viewing possible upon appointment. More info available on request. Including: ELECTRONIC HANDWHEEL 18.000 RPM HEIDENHAIN MEASURING PROBE MODE 4 DIVIDING WALL CHIP CONVEYOR SCRAPER BELT TYPE IKZ WITH PAPER BELT FILTER BLOWN AIR THROUGH SPINDLE EXTERNAL COOLING OIL MIST SEPARATOR BREAK REMOVAL TOOL WITH LASER RESIN GUN NET SERVICE EXTENSION IBN NET SERVICE Optional: Large set of SK40 tooling and vises/clamping systems available. Cnc control SIEMENS Sinumerik 840D Number of axes 3 Maximum Reach X 2200 mm Maximum Reach Y 560 mm Maximum Reach Z 720 mm Maximum Clamping Height 600 mm Table Size (LxW) 2600x600 mm Maximum Table Load 2200 kg Guide Type Linear Tedpfx Asz Hmmrjkied Max. Speed 18,000 rpm Max. Power 35 kW Tool Holder SK40 Tool Magazine Capacity 60 Tool Change Duration 9.6 sec Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: excellent (used), Year of construction: 2006, Control system: Heidenhain iTNC 530 Tjdpfx Aszg Nmkokiod Travel ranges X/Y/Z: 2200 x 560 x 720 mm Spindle speed: 18,000 min-1 Clamping area: 2600 x 600 mm Max. table load: 2200 kg Swiveling head Coolant pressure: 25 bar Tool magazine for 30 tools, SK 40 Optional C or A axis Measuring probe: Heidenhain TS 640 Chip conveyor Paper band filter

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle speeds : 3000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 300 [mm] - Max. diameter on bench : 520 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 53 [mm] - C axis indexing precision : 0.001 [°] - Travel : 520 [mm] TURRET - Number of positions : 12 - X/Z stroke : 230 / 460 [mm] - Live tools speed : 4500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22.5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3050 x 1860 [mm] - Machine height : 1.850 [mm] - Machine weight : 5500 [kg] EQUIPMENT - CNC : OSP-P300L-R - Coolant tank * with high-pressure pump Tjdpeuhbnnsfx Akied - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : Top Automation FU352 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, controller model: Siemens 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 2,200 mm Travel range Y-axis: 560 mm Travel range Z-axis: 720 mm Spindle speed: 20–12,000 rpm Tool holder: SK 40 Spindle power: 35 / 25 kW Tool positions: 32 Max. tool length: 300 mm Max. tool weight: 6 kg Table clamping area: 2,600 × 600 mm Max. table load: 2,200 kg Rapid traverse X-axis: 80 m/min Tedjzmyd Topfx Akisd Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min MACHINE DETAILS Control system: Siemens 840D Power supply: Three-phase Dimensions & Weight Space requirement: approx. 7,000 × 4,200 × 2,700 mm Machine weight: approx. 12,000 kg EQUIPMENT Documentation / Manual Infinitely adjustable speed Chip conveyor Internal cooling: 40 bar Measuring probe: Renishaw OP60

Condition: used, Year of construction: 2002, operating hours: 14,704 h, functionality: limited functionality, machine/vehicle number: 15115220654, travel distance X-axis: 2,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 660 mm, controller model: Heidenhain iTNC 530, workpiece weight (max.): 2,200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 4 Travel range X-axis: 2,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 660 mm Rotation B-axis: 105° Spindle speed: max. 18,000 rpm Interface: SK40 Table size, length: 2,600 mm Table size, width: 600 mm Workpiece weight: max. 2,200 kg MACHINE DETAILS Tedpfxezdd Tns Akied Control system: Heidenhain iTNC 530 Dimensions and weight Dimensions (L x W x H): 6,000 x 3,700 x 2,900 mm Dry weight: 12,500 kg Operating hours: 14,704 h EQUIPMENT Fourth axis with 550 mm clamping surface and hydraulic tailstock Heidenhain measuring probe Spindle cooling Measurement log Coolant tank Filter separator Documentation CE marking Note: Machine vices are not included. The machine is not immediately ready for operation and requires minor repairs. A linear field segment is causing problems.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Tedpfotk It Sjx Akied Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous mobile gantry vertical machining center, with rotary table (capable of both horizontal and vertical mounting) with a diameter of 550mm. Possibility of pendulum machining (pallet changer type) with dedicated partition. Equipped with BLUM laser control NT tool presetting. Wireless part probe HEIDENHAIN TS 642. Belt-type chip conveyor. High-pressure through-spindle cooling with paper filter. Spindle chiller. Remote HEIDENHAIN handwheel. Tjdpfxey Diabe Akijd

Condition: excellent (used), Year of construction: 2008, Vertical machining center Deckel Maho DMF 220 Linear Year of manufacture: 2008 Control: Siemens 840 D Technical specifications: CNC control: Siemens Sinumerik 840D Number of axes: 3 X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Max. clamping height: 600 mm Table size (LxW): 2,600 x 600 mm Max. table load: 2,200 kg Guideway type: Linear guide Max. power: 35 kW Tool holder: SK40 Tool magazine capacity: 60 Tool change time: 9.6 s The machine was in active serial production until recently and was predominantly used for machining steel and aluminum. Equipment: ⦁ Partition wall for setup time optimization (parallel machining / setup in one cabin half) ⦁ Conveyor belt filter system for coolant processing ⦁ Automatic tool changer ⦁ Generous working area for complex components Tsdjy Nbbzepfx Akiod

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill electronical hand wheel Todpfxorb A Tce Akiod coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.