Used Kgz 3050 for sale (352)

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 1,600 rpm, travel distance X-axis: 368 mm, travel distance Z-axis: 2,900 mm, total height: 1,925 mm, total width: 1,525 mm, overall weight: 3,820 kg, product length (max.): 5,278 mm, number of axes: 2, Horizontal turning machine manufactured in 2022. This Optimum OptiTurn TH 8030D features a maximum swing diameter of 800 mm and a turning length of 250 mm. It includes a robust spindle chuck and a rapid motion speed of 3800 mm/min. If you are looking to get high-quality turning capabilities, consider the Optimum OptiTurn TH 8030D machine we have for sale. Contact us for further details regarding this machine. • Type and highlights • Leading and traction spindle lathe, high flexibility, precision and cost-effectiveness • With digital position indicator prepared (see Additional equipment) and quick-change steel holder (see Additional equipment) • Shipping information • Packaging metrics: Length 4770 mm, Width 1150 mm, Height 1840 mm • Weights: Gross 4480 kg, Net 3870 kg • Technical data • Load bearing capacity 1,4 t/m • Work areas: • Max. height 400 mm • Swing diameter above machine bed 800 mm • Swing diameter above planing slide 570 mm Pedsyxncdjpfx Ampogk • Bed width 400 m • Max. width 3050 mm • Swing diameter in bed bridge 1035 mm • Turning length in bed bridge 250 mm • Speed range: • Number of gears 16 • Fast motion speed: • Rapid motion speed 3800 mm/min • Explanations about rapid motion max. 5 min (30 min. break) • Electrical data: • Drive motor output 11 kW • Supply voltage 400 V • Mains frequency 50 Hz • Electrical connections: Total rated value 12 kW • Cooling lubricant system: • Coolant pump output 150 W • Spindle: • Spindle chuck Camlock DIN ISO 702-2 No. 8 • Spindle bore/rod passage diameter 105 mm • Spindle cone Ø113 (cone 1:20) mm • Tool holder max. chuck height 32 mm • Tailstock: • Tailstock chuck MK 5 • Tailstock quill stroke 235 mm • Tailstock quill diameter 90 m • Pitches: • Metric pitch 0,45 – 120 mm/rev (54 pitches) • Imperial pitch 80 – 7/16 Gg/1" (60 pitches) • Diametrical pitch 7/8 – 160 (42 pitches) • Modular thread pitch 0,25 – 60 mm/rev (46 pitches) • Travel: • Travel upper slide 230 mm • Travel carriage saddle 2900 mm • Travel cross slide 368 mm • Feed: • Longitudinal feed range 0,044 – 1,48 mm/rev (25 feeds) • Flat feed range 0,022 – 0,74 mm/rev (25 feeds) • Design features and safety • Hardened and ground Z-axis guideway • Spindle mount Camlock DIN ISO 702-2 No. 8 • Precisely crafted sled; all guides adjustable by wedge strips • Adjustment range upper slide ± 90° • Guaranteed concentricity of the spindle nose better than 0.015 mm • Waves, wheels and main spindle running in oil bath • Gear wheels smooth, hardened and ground with 2 adjustable precision tapered roller bearings • Clear selection lever for switching the feed rates • Closed design of the rapid-action feed gear • Gears and shafts hardened and ground in an oil bath in precision bearings • Handwheels decoupled and tested according to EN 23125 • Two-channel right-left switch tested to EN 23125 • Switch with life cycle calculation, tested according to EN ISO 13849 • Right/left rotation on bed carriage via switching spindle switchable • Central lubrication in the bed slide • Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN • Leading spindle • Emergency stop blow switch, motor protection switch, lockable main switch • Emergency stop device with foot control • Safety handwheels with release function in the X-axis • Handwheels with adjustable fine scale 0.04 / 0.02 mm • Tailstock for taper turning ± 10 mm adjustable • Tailstock quill and handwheel with adjustable fine scaling

Condition: new, Year of construction: 2025, machine/vehicle number: OR-220701306, Description: AORE PG3015: ( 3 Kw) 40 sold in 10 month. We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 6 overall dimensions 8265 x 2280 x 2150 mm weight of the machine ca. 5.400 kg Furnishing: - Max-photonics Laser source 3 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 3 Kw ) Podpslkgd Iefx Ampsgk - normal steel 20 mm - stainless steel 10 mm - aluminium 10 mm - brass 9 mm - copper 7 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1440 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2025, Description: AORE PG3015 T6: (3 Kw) We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 3 overall dimensions 8635 x 3920 x 2350 mm weight of the machine ca. 6.400 kg Furnishing: - Max-photonics Laser source 3 Kw (1~20 Kw as option) - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 3 Kw ) Pgjdpfxoix Nb Nj Ampjk - normal steel 20 mm - stainless steel 10 mm - aluminium 10 mm - brass 6 mm - copper 5 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 2100 mm - Y-axis travel 3000 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G tube Double pneumatic Chuck 10 ~ 225 mm cutting 10 till 225 mm sqaer and rond tube lenght 6 meter special software for tube cutting max load 300 kg Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1000 kg. - 2 x CCTV camera 1 on pallet arear and 1 on cutting inside assisting gasess: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2025, machine/vehicle number: OR-220701306, Description: AORE PH3015: (6 kW) New from stock We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm Pedpfxoix Nn Uj Ampogk laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 6 overall dimensions 8265 x 2280 x 2150 mm weight of the machine ca. 6.400 kg Furnishing: - Max-photonics Laser source 6 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 6 Kw ) - normal steel 25 mm - stainless steel 20 mm - aluminium 16 mm - brass 10 mm - copper 7 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1000 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Pgjdpfxsfifg He Ampek Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: new, Year of construction: 2024, Make: DURMA Type: AD-S 30175 Year of construction: 2020 Folding length: 3050 mm Pressing force: 1750 kN Control: CNC DT-15 Operating hours: 33 h Bcq29blmc8 Controlled axes back gauge: X,R Clearance between the uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Psdpsd Srk Sofx Ampegk Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Servo motor backgauge Safety covers on the side CE marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC- Controlled axes X,R-axis, Z-axes manually adjustable CNC controlled motorized crowning European upper tool/lower tool from Rolleri The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: new, Year of construction: 2024, operating hours: 32 h, Make: DURMA Type: AD-S 30135 Year of construction: 2018 Folding length: 3050 mm Pressing force: 1350 kN Control: CNC DT-15 Operating hours: 0 h Controlled 3 axes: Y1,Y2, X Clearance between the stands: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm (double guide, aluminum) Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 120 mm/s Dimensions L/W/H: approx. 4200x1680x2750 mm Weight: approx. 10250 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 Manual crowning European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Backgauge: motorized with linear guide & ball screw spindle Backgauge finger height-adjustable, R-axis manual Backgauge motor servo Safety covers on the side CE marking Extended equipment CE safety system with manual FIESSLER AKAS II M-FPSC-B-C+safety cover & switch The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. Pgedpjdx Rd Njfx Ampsk We will be happy to send you further information on request.

Condition: good (used), Containers, transport containers, sea containers, steel containers, ISO containers, material containers Podpfeyv Axhox Ampsgk -Steel container: Material container with wooden floor, lighting and hanging hooks -Container interior dimensions: 2940/2010/H2000 mm -Transport dimensions: 3050/2100/H2140 mm -Transport weight: 560 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, Technical data: Maximum pressing force Working length between frames Horn length left + right Maximum horn load Total working length Throat depth Table width Ram width Maximum stroke Ram tilt adjustment (Y1/Y2) Rapid approach speed Psdpjy D A Ixefx Ampsgk Return speed Working speed (approx.) Maximum distance between table and ram Rear stop (X) adjustment Rear stop (X) adjustment speed Backgauge height adjustment (R) Height adjustment travel of backgauge Backgauge height adjustment speed Adjustment of backgauge fingers (Z1/Z2) Adjustment speed Drive power Required oil filling Space requirements above floor Length: Width: Height (approx.) Weight (approx.) Press control - DNC 74 PS-Hydraulic Tool clamping: HKI/V-2 Lifting aid 1500 lg. with support consoles Tools: A4-T2-B-Sp 63 / A4-T3-M51 Die displacement with counter BLATT 631.00-1 KN mm 3150 3050 mm KN mm mm mm mm mm 3620 350 290 100 250 20 mm mm/sec. mm/sec. mm/sec. mm 90 . 75 0-8.5 593 0-700 mm mm/sec. 50 mm mm/sec. - mm/sec. - KW 30 1 420 mm mm 3900 2800 mm 3900 29500 Electric-hydraulic. Manufacturer/Type: Wieger 315 / 35 Short description: CNC press brake Description: Immediately available ex site: CNC press brake Wieger Type 315 / 35 Year of manufacture 1991 CNC control Cybelec Weight 28 t

Year of construction: 2006, condition: ready for operation (used), overall weight: 7,300 kg, total width: 2,200 mm, total height: 2,100 mm, cutting length (max.): 3,050 mm, product length (max.): 4,100 mm, sheet thickness (max.): 6 mm, Hydraulic shearing machine manufactured in 2006. This Durma SB 3060 features a maximum cutting length of 3050 mm and can handle sheet thicknesses of approximately 6 mm. It includes a motorized backgauge with a range of 10–1000 mm for precise cuts. If you are looking to get high-quality shearing capabilities, consider the Durma SB 3060 machine we have for sale. Contact us for further details. • Capacity: 3100 × 6 mm • Stroke: 105 mm • Strokes per minute: 15 / min • Oil tank capacity: 170 liters • Width: 3100 mm Pjdeyw Iwxjpfx Ampegk • Length: 3850 mm • Height: 1950 mm • Machine weight: 6900 kg

Condition: excellent (used), in full length (without division): 3050 mm Pgjdjhz T Huspfx Ampek Height: 161mm Width: 50mm

Condition: ready for operation (used), max. working width: 2040 mm for metal sheets up to: 2 mm opening width top clamping bar: 90 mm adjustment bending cheek: 90 mm Pjdpfx Amsd Rbz Tjpjgk clamping bar drive: 1,5 kW below cheek drive: 4 kW electrical connection: 380 V kW weight: 2600 kg space needed: 3050 x 800 x 1350 mm

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t working width: 4500 mm clear support width: 3050 mm support throat: 300 mm Pgodjb N Evmspfx Ampjk rear stop: 1000 mm electrical connection: 380 V, 18,5 kW weight: 14,8 t space needed: 4200 x 2000 x 3000/3150 mm

Year of construction: 1990, condition: used, pression: 250 t Psdpfx Amj Dqaqepsgk working width: 3550 mm clear support width: 3050 mm support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm

Condition: excellent (used), Year of construction: 1985, max. working width: 3050 mm for sheet metal (at 45 kg tensile strength) up to: 6 mm clear gap between uprights: 3400 mm cutting angle adjustable by hand: 0.5 - 3° number of hydraulic hold-downs: 18 stroke rate approx.: 9 - 17 /min gauge adjustment: 1000 mm hydraulic drive: 380 V, 7.5 kW Pedoxrp Thspfx Ampegk required space incl. back gauge: 3600 x 1800 x 1580 mm weight: 5200 kg

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 112813 € 2132.17 € 320 to 3050 mm Y1 / Y2 / X Achse 365 mm 2600 mm 450 mm 630 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 154 mm 250 l 37 kW 4300 mm 1820 mm 3330 mm 17100 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) Pgodpfx Aowirbfempsk CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 88113 € 1665.34 € 220 to 3050 mm Y1 / Y2 / X Achse 265 mm 2600 mm 450 mm 530 mm hydraulisch 140 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm Pedpfx Amewiqudspogk 104 mm 250 l 22 kW 4250 mm 1770 mm 3000 mm 12600 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PDF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... OPTIONAL EQUIPMENT: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Hydraulic or pneumatic tool clamping for Euro or Wila tools

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), fuel type: diesel, color: yellow, operation weight: 166 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 2550 H Vibratory Plate – NEW | 25 kN Centrifugal Force | 500 mm Working Width | Hatz Diesel Engine 1B20 with 3.1 kW Item No.: 5000610036 Technical Specifications: Manufacturer: Wacker Neuson Model: DPU 2550 H Condition: NEW Operating Weight: 166 kg Frequency: 90 Hz Centrifugal Force: 25 kN Working Width: 500 mm Engine: Hatz 1B20 Diesel Engine Engine Power: 3.1 kW Fuel: Diesel Starting System: Recoil Start Compaction Class: Medium-heavy duty Surface Capacity: approx. 624 m²/h Highlights & Features: - Compact diesel vibratory plate for versatile applications - Robust construction – ideal for daily site use - 500 mm working width – high surface capacity in a compact design - Ergonomic guide bar – low-vibration & comfortable - Reliable Hatz diesel engine – powerful & efficient - Made by Wacker Neuson – proven quality & immediately available Fields of Application: ✓ Paving construction & medium-sized surface areas ✓ Landscaping & gardening ✓ Municipal works & construction companies ✓ Fiber optic & cable installation ✓ Compaction tasks on small to mid-sized sites Options: Available at extra cost only in combination with machine: - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system for recording operating data such as operating hours, maintenance intervals, and emissions. Data is transmitted wirelessly to the Wacker Neuson app and clearly displayed. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery throughout Germany & internationally upon request Pricing ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) Pedpfx Amsyyqcvjpsgk All information without guarantee. Subject to prior sale and errors. Prices plus VAT / VAT excluded Further models and sizes available! Also in stock: DPU 3050, DPU 3750 and more ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson Vibratory Plate | DPU 2550 H NEW | Diesel Vibratory Plate 25 kN | 500 mm Vibratory Plate | Hatz Engine | Wacker Neuson Compaction Equipment | Vibratory Plate for Paving Construction Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! Upon request, we are happy to offer you a virtual machine inspection via video call.

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), fuel type: diesel, color: yellow, operation weight: 160 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 2540 H Vibratory Plate Compactor – NEW Wacker Neuson DPU 2540 H Vibratory Plate Compactor – NEW | 25 kN centrifugal force | 400 mm working width | Hatz diesel engine 1B20 with 3.1 kW Item number: 5000610035 Technical specifications: Manufacturer: Wacker Neuson Model: DPU 2540 H Condition: NEW Operating weight: 160 kg Frequency: 90 Hz Centrifugal force: 25 kN Working width: 400 mm Engine: Hatz 1B20 diesel engine Engine output: 3.1 kW Fuel: Diesel Start system: Recoil starter Compaction class: Medium-duty Area performance: approx. 624 m²/h Highlights & Equipment: - Compact diesel vibratory plate, suitable for a wide variety of applications - Robust construction – ideal for daily use on construction sites - 400 mm working width – for precise compaction even in tight spaces - Ergonomic guide bar – low vibration & comfortable operation - Reliable Hatz diesel engine – powerful & fuel-efficient - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Paving and medium-size surfaces ✓ Landscaping and gardening ✓ Municipal projects & construction companies ✓ Fiber optic & cable installation ✓ Compaction tasks on small to mid-sized construction sites Options: Surcharge only in combination with machine: - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system for recording operating data such as run hours, service intervals, and emissions. Data is transmitted wirelessly to the Wacker Neuson app and clearly displayed there. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Nationwide & international delivery on request Pricing ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information is provided without guarantee. Subject to errors and prior sale. Pedpfxeyyqbxo Ampogk Prices excluding VAT Further models and sizes available! Also in stock: DPU 2550, DPU 3050, DPU 3750 etc. ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson Vibratory Plate | DPU 2540 H NEW | Diesel Compactor 25 kN | Vibratory Plate 400 mm working width | Hatz engine | Wacker Neuson Compaction Technology | Plate Compactor for Paving Applications Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new equipment! Virtual viewing of the machine via video call available on request.

Condition: used, Year of construction: 2011, AXES Working Range X-Y-Z Axes * mm 3050-1300-180 Pjdpfx Amsyymz Uopogk Workpiece length for pendulum operation mm 1390 Stroke X-Y-Z Axes mm 3460-1735-250 Max. traverse speed of X-Y axes m/min 60 WORK TABLE Number of workpiece supports and vacuum cups 6 / 2 standard type Standard end stops / position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles std/quantity/speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles std/quantity/speed 1/min 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power std./opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer traveling with unit carrier in X 4 places, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction connection diameter mm 150+150 (200) Machine weight Kg 3000 * X: distance between stops; Y: milling center as reference point; Z: workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center, C-frame design, and worktable with adjustable workpiece supports and vacuum suction cups, for: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutter in the “X” direction - General milling work Self-supporting structure and work table Structure made from welded steel construction with control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV carrier options. Box construction made from cold-rolled steel with internal stiffening ribs and protective devices comprising a drilling head with vertical spindles, horizontal spindles, an integrated grooving and saw unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Movement paths of the portal and unit carrier Movement in the X, Y, and Z axes is via linear prismatic guideways with preloaded ball bearings. The X-axis movement (moving gantry) uses a preloaded, backlash-free rack-and-pinion drive with helical gearing. Movement of the unit carrier in Y and Z directions is also preloaded for precision. Positioning of the working units and machine function control is through "brushless" AC servo motors and digital drives. CNC CONTROL The control unit comprises a numerical control for the milling and drilling machines and a PC with a graphical user interface "XILOG PLUS". PC office operating system Windows XP - 17" LCD color screen - QWERTY keyboard - Swiveling control panel - Machine interface: Xilog Plus software Xilog Plus Features Programming - Parametric, graphical, and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation on three axes, spatially linear, spirally on selected plane - Supported programming with graphical and syntax assistance for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on slanted or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - S

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Psdpfx Astp I S Aempegk

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Vacuum Press – Ready for Immediate Use | Excellent Condition | Versatile Applications For sale: High-quality vacuum press in excellent condition – ideal for joineries and woodworking companies seeking to work more efficiently and flexibly. This press enables you to: - Perform precise veneering - Carry out form bonding - Shape mineral-based materials and plastics - Achieve efficient production even for single pieces and custom solutions What this means for you: Expand your service portfolio and take on jobs that were previously not feasible or profitable. Technical Specifications: Vacuum Press Pioneer Vertical L Usable area: 3050 x 1350 mm Podpfx Ajy Awqlsmpegk Frame internal dimensions: 3130 x 1430 mm Max. workpiece height: 850 mm Overall dimensions: 3960 x 1640 x 1450 mm Weight: 880 kg Heater Pioneer Heat L Usable area: 2700 x 1100 mm Overall dimensions: 3110 x 1700 x 760 mm Weight: 685 kg Special features: - Easy operation - Low maintenance requirement - Versatile applications - Lifetime warranty (excluding wear parts) - Includes digital user manual and AI support! Inspection and test run possible at any time.

Year of construction: 2024, condition: as good as new (ex-display), Bending power 2200 KN Bending length 3050 mm Passage between d. stands (mm) 2600 mm Stroke length (mm) 265 mm Extension 410 mm Installation height 530 mm Operating speed Y (mm/sec) 10 mm/sec Engine power 18.5 KW Operating speed X (mm/sec) 500 mm/sec Operating distance R (motorized) 350 mm Length 4250 mm Width 1700 mm Height 2750 mm H7s8pkvti Weight 11500 kg Standard: Y1, Y2, pressure bars - axes (individually controllable) X-, R - axes CNC controlled. Control Unit - ModEva 19T Servo motor rear stop & linearly guided ball circulation spindle system (X-R) (AL) CNC-controlled bombing European tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional: Bending - upper tool H=66.5 ( one of them in division ) Bending - Subtool 4V The ( one of them in division ) D-Bend 3D CAD/CAM Import & Simulation Program The machine can be inspected and demonstrated at any time by appointment at our demonstration centre in Staufenberg. Vsiqjq Further machines are ready for demonstration in Staufenberg. Pedpfod R Elcox Ampsgk On request, we will be happy to provide you with further information.

Condition: new, Year of construction: 2024, functionality: fully functional, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Standard equipment Capacity (length - ton) 3050mm - 175t Installation height 530mm Outreach 450mm Stroke 265mm Pjdpfx Amotr Dk Eepsgk Servo drive Y1, Y2, X - 3 axles Control unit - DT 15 Manuel F. AKAS FPSC safety system CE-Fiessler Akas Servo motor backgauge & linear guide & Ball screw system Manual crowning European tool holder Sliding front arms Options - DELEM 69S control unit (3D control) -Motorized crowning - 6 axes X=650mm Y1, Y2, X ,R , Z1, Z2 (6 axes controlled press brake) press brake) -Lower tool European M.460R.85 -European upper tool P135.75.R08

Year of construction: 2024, condition: new, Make: DURMA Type: AD-R 30220 bending length: 3050 mm Press force: 2200 kN Control: CNC DT-10 Operating hours: 0 h Controlled axes Backgauge: X,R passage between the uprights: 2600 mm stroke length: 265 mm Installation height: 530 mm table width: 104 mm table height: 900 mm Stands projection: 410 mm travel range X-axis: 650 mm traverse speed X-axis: 250 mm/s Infeed speed: 140 mm/s folding speed: 10 mm/s retraction speed: 140 mm/s Dimensions L/W/H: approx. 4250x1770x2900 mm Weight: approx. 12250 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 European tool clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guidance along the entire length Backgauge motorized with linear guide & ball screw Backgauge finger height adjustable Back stop motor Servo Safety covers lateral CE Marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC-B-C+ safety cover & switch Controlled axes X,R-axis, Z-axis manually adjustable Quick clamping CNC controlled motor-driven crowning The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. Podpfx Asd Srk Eompjgk We will be happy to provide you with further information on request.