Used Kasto Vbs 242 for sale (147)

Condition: used, cutting diameter 320 mm saw band length 6300 mm cutting range 420 x 320 mm control Siemens Simatic HMI cutting speed 20 - 130 m/min Ibjdexb Edujpfx Aacjc height of material-table 950 mm total power requirement 15 kW weight of the machine ca. 2920 kg dimensions of the machine ca. 6,35 x 6,76 x 2,41 m Machine overhauled by Kasto in 2016 Equipment/accessories: - Cutting feed continuously adjustable - Pneumatic connection 6 bar - Coolant 75 l - Pump capacity 40 l - Roller conveyor - Chip conveyor - Technical documentation

Condition: excellent (used), The fully hydraulic production rapid-frame bandsaw features a universal hydraulic system for either exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, using a standard tooth pitch of 3 or 4 teeth per inch. It is equipped with a pre-tensioned bow guide, enclosed oil hydraulics, three-position pivot bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lift-off movement, accelerated return stroke, and comes standard with a continuously adjustable mitre device. Rapid traverse for saw bow lifting. The oscillating vice ensures optimal use of the saw blade. Longitudinal guide with ground and hardened guide rails transfers cutting pressure forces to the saw bow. Automatic end-stop shutdown. Push-button controls for ON, OFF, and rapid traverse lifting of the saw bow. Manufacturer: KASTO Model: Metal Frame Bandsaw Machine type: PSB 280 U Drive power: 2.2 kW Stroke rates: 40/51/64/80/102/128 per min Cutting speeds: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: Hydraulic Round cutting capacity: 280 mm Flat cutting capacity: 280 x 150 mm Mitre adjustment: 0–45° Material support height: 600 mm Weight: 650 kg Dimensions (L/W): 1500 x 600 mm Ibjdpfx Aasxdwbkocjc Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: Coolant equipment, rapid traverse lowering, rapid traverse raising.

Condition: used, Year of construction: 1994, cutting diameter 260 mm cutting width 400 mm capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm band speed 17 - 110 m/min engine output 3,5 kW Ibedpfx Aaoxf I Uqecoc dimensions of saw-band 3830 x 25 x 0,9 mm weight of the machine ca. 1,3 t dimensions of the machine ca. 2,1 x 2,0 x 1,6 m High-performance fully automatic band saw with - coolant system - documentation

Condition: good (used), Year of construction: 2004, functionality: fully functional, saw band length: 5,700 mm, cutting height (max.): 400 mm, stepless cutting speed hydraulic material clamping infeed automat chip conveyor coolant device roll conveyor Technische Daten: Schnittbereich rund / cutting range round 400 mm Ibsdpfx Aajtzkdgscoc Schnittbereich vierkant /cutting range square 400x400 mm Mehrfachvorschub / multiple infeed 20000 mm Schnittgeschwindigkeit / cutting speed 20-110 m/min. Sägebandlänge / dimensions of the saw band 5700x41x1,3 mm Antriebsleistung / drive capacity 8 kW Gewicht der Maschine ca. / weight 2700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, For sale is a KASTO PSB 180 fully automatic hacksaw – a robust industrial machine for precise and automated cutting of steel and other metals. The machine is very solidly built, easy to maintain, and ideally suited for workshops, metalworking shops, or steel construction. Details: • Manufacturer: KASTO • Model: PSB 180 fully automatic • Cutting method: hacksaw / automatic operation • Material feed available • Integrated safety covers and cooling system • Drive: three-phase motor Ibedpfx Ajxhdmuoacec • Condition: used, fully functional, ready for immediate use Location: Quickborn

Condition: used, Year of construction: 2001, saw blade diameter 400 mm cutting diameter 240 mm stroke 9999 mm Iodet Hyp Aopfx Aacjbc load centre 10/60 U/min rotary disc high 240 mm component weight 170 mm total power requirement 6 kW speeds 3100 kg peripheral speed 3450 x 1470 x 1910 mm

Condition: used, Year of construction: 2002, cutting diameter 260 mm dimensions of saw-band 4115 x 41 x 1,3 mm cutting range square 260 x 260 mm weight of the machine ca. 2,2 t Remaining piece length: 80 mm Smallest diameter that can be sawn: Ø 8 mm Smallest cut length: 8 mm Minimum remaining piece length, single cut: 30 mm Minimum residual piece length, automatic mode: 80 mm Maximum automatic material feed: 600 mm (modified for repeat accuracy of +/- 0.2 mm) Belt speed: infinitely variable 15–125 m/min Cutting feed: infinitely variable Material clamping: hydraulic, clamping pressure adjustable Equipment: Ibedpfx Ajxa Hk Toacjc Vibrating table Belt tension monitoring Roller conveyor 3500 mm(roller drive via hand wheel) with guide rollers roll width approx. 320 mm Chip conveyor Subject to errors in the technical data Translated with (free version)

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, saw band length: 4,115 mm, saw band width: 41 mm, total height: 20,000 mm, total length: 20,000 mm, total width: 20,000 mm, power: 0.004 kW (0.01 HP), Fully hydraulic high-performance bandsaw in an extremely robust design, featuring a horizontally and parallel traversing saw blade, for cutting profiles, pipes, and solid materials of all qualities, including materials that are extremely difficult to machine (e.g. titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw blades. The saw head is made from solid polymer concrete, ensuring exceptional vibration damping and maximizing the service life of the saw blades. The saw unit is guided via a vertical and a round column (double column guide) fitted with hardened and ground guide strips. Hydraulic saw blade tensioning and hydraulically preloaded carbide saw blade guides provide additional precision and performance. Material clamping is accomplished with two hydraulic vices. The machine is user-friendly thanks to its intuitive controls. Cutting length is set using a handwheel, with a resolution of 0.1 mm. The piece count can be preset via a counter; the machine automatically switches off once the specified quantity is reached. Material feed is handled by a hydraulic feed cylinder, guaranteeing highest cut length accuracy. The machines are easy to operate and work fully automatically. SSB 260 VA 260 mm x 260 mm (Ø 260 mm) Technical Data: Bandsaws KASTO Bandsaw Automatic Machines Machine Type: SSB 260 VA Technical Specification: Double column guided Year of manufacture: 2000 Cutting range: 260 x 260 mm Drive power, saw gearbox: 4 kW Drive power, auxiliary units: 6.5 kW Cutting speed: 15–125 m/min Saw feed, hydraulics: Infinitely adjustable Saw blade dimensions: 4115 x 41 x 1.1 mm Feed length: 600 mm Max. multi-stroke feed: 5400 mm Material infeed height: 850 mm Machine dimensions: Length/Width: 1690 x 1900 mm Height: 2030 mm Ibodpfx Aexc D Egsacoc Machine weight: 2100 kg Accessories: • Chip conveyor • Coolant system • Multi-stroke feed • Side guide rollers • Machine roller conveyor • Adjustable side guide rollers • Prepared for bundle clamping device • Multi-feed counter

Condition: used, Hydr. hacksaw KASTO HBS 210 / 240 Machine no. No. 1116 145 220 Year of construction 1994 Sawing range at 90° round 210 mm Ibedsuqgbtspfx Aacec flat 240 x 190 mm square 210 x 210 mm at 45° round 150 mm Saw blade length 400 mm Number of strokes 62 / 125 strokes per min. Material support height 500 mm Motor power 0.5 / 0.75 kW Mains connection 400 Volt, 50 Hz - Drive motor with 2 speeds - Coolant pump in the machine base frame Space requirement L x W x H 1200 x 500 x 1200 mm Weight 170 kg Good condition

Year of construction: 2002, operating hours: 2,600 h, condition: ready for operation (used), General Data Measurements width 1535 mm Measurements depth 2010 mm Measurements height 2340 mm Machine weight 3700 kg Isdpfx Aajxczqyscjbc Main Drive Spindle speed range 12000 Number of axis 4 Movement X-Axis Movement 450 mm Y-Axis Movement 550 mm Z-Axis Movement 510 mm Workpiece Workpiece weight 350 kg This KASTO KASTOpos GA 4 was manufactured in 2002. A robust Metal Band Saw, ideal for precision cutting. Consider the opportunity to buy this KASTO KASTOpos GA 4 Metal Band Saw. Contact us for more information. Application Types Sawing

Year of construction: 1989, condition: good (used), Kasto fully automatic sawing machine type HB 420 AU. Sawing capacity round 420mm Sawing capacity square 420x420mm Maximum clamp opening 480mm Saw blade 6300x41x1.3mm Variable speed 20-130rpm Chip conveyor Engine power 8kW Weight 3360kg Ibodpfsh Huazox Aacsc Machine in neat good working condition.

Condition: used, Year of construction: 1990, cutting diameter 280 mm band length 450 mm capacity 90 degrees: square 240 x 240 mm capacity 90 degrees: flat 280 x 160 mm capacity 45 degrees: round 180 mm dimensions of saw-blade 450 x 40 x 2.0 mm engine output 2.6 kW height of material-table 500 mm weight of the machine ca. 495 kg range L-W-H 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice Ibedpfx Aexab Hcoacsc - coolant device

Condition: good (used), Year of construction: 2006, Immediately available - affordable Hydraulic Band Saw Automatic Manufacturer: Kasto Model: TWIN A 2 Year of manufacture: 2006 Length: 1,755 mm Width: 2,475 mm Height: 1,570 mm Total weight approx. 1,700 kg Total drive power 5 kW Saw motor drive power 3 kW Cutting range Ø 260 mm Cutting range, flat (W x H): 260 x 260 mm Smallest round dimension Ø 10 mm Square, H x W: 10 mm Maximum single feed length: 750 mm Multiple feed up to: 9,999 mm Shortest cut-off length: 6 mm Smallest diameter to be cut: 10 mm Minimum remnant in single cut: 15 mm Shortest remnant length in automatic mode: 100 mm Cutting speed, steplessly adjustable: 20 - 100 m/min Saw blade dimensions: 4,530 x 34 x 1.1 mm Material support height: 700 mm Ibjdsxdag Nopfx Aacsc Cutting feed: steplessly adjustable Data subject to verification Comes with: • Floor pan (under the machine) • Chip conveyor • Operating manual • Additional machine table (support) in front of the unit Immediately available ex stock 78234 Engen

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Ibodpfoxg Rhvjx Aacoc

Condition: ready for operation (used), Year of construction: 1986, saw band length: 450 mm, cutting height (max.): 280 mm, cutting capacity 280 mm band length 450 mm double hydraulic vise Isdpfxjxbhm Se Aacjbc

Condition: used, Year of construction: 2000, machine/vehicle number: 6510 114 214, saw band length: 4,115 mm, saw band width: 41 mm, Metal Band Saw KASTO SSB 260 VA Manufacturer: KASTO Model: SSB 260 Series 114 (vertical) Year of manufacture: 2000 Technical Data: Round cutting capacity: 260 mm Square cutting capacity: 260 x 260 mm Smallest diameter to be cut: Ø 8 mm Minimum cutting length: 8 mm Minimum remnant length per single cut: 30 mm Minimum remnant length in automatic mode: 80 mm Automatic material feed, single stroke max.: 600 mm (modified for repeat accuracy of +/- 0.2 mm) Band speed: infinitely variable, 15 - 125 m/min Feed rate: infinitely variable Material clamping: hydraulic, clamping pressure adjustable Total connected load: 6 kW Machine weight: 2.0 t Saw blade dimensions: 4115 x 41 x 1.3 mm Special Features: - Electrically driven vibrating table - Band tension monitoring - 6 m roller conveyor with laterally adjustable guide rollers - Swarf conveyor with extra high discharge, especially designed for materials producing long chips. Ibedpfx Aajxmv Nlocjc Accessories: - Combined welded base frame for machine and roller conveyor, suitable for installation on non-contiguous foundations. With tightly welded drip tray under the main machine. - Swarf trolley - Drip tray with grating and tightly welded base under swarf trolley Fully functional, in good overall condition. Price: Negotiable plus VAT (no warranty)

Year of construction: 2009, operating hours: 36,000 h, condition: ready for operation (used), General Data Measurements width 1500 mm Measurements depth 4800 mm Measurements height 1900 mm Machine weight 2700 kg Isdpfxjxbulzo Aacsbc Additional Equipment Voltage: 400 V With automatic feed Residue bunker Coolant device Mitre cut Loading station, chain magazine with 20 compartments on the infeed side Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides Minimum quantity lubrication including 2x shelfs from Kasto This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Application Types Sawing

Condition: good (used), Year of construction: 2007, total height: 700 mm, Smallest diameter 10 mm Shortes length singel stroke 15 mm Shortes length automatic mode 100 mm Working height 700 mm Ibodpsw R Squofx Aacjc Max. stroke 9999 mm Control panel  Memory 99 program with  Bundel clamp device  New price 45.000 Capacity 90°:260° Length: 1800mm Width: 2475mm Height: 1600mm Weight: 1700kg

Condition: excellent (used), KASTOmicut U 2.6 – Semi-Automatic Pivot Frame Bandsaw incl. Long Roller Conveyor For sale is a heavy-duty, semi-automatic pivot frame bandsaw KASTOmicut U 2.6. The machine features infinitely variable cutting speed and is ideally suited for all cross-cutting and mitre tasks (-45°/+60°) on pipes, profiles, and solid materials in workshop environments. The fully hydraulic saw feed and hydraulic material clamping enable semi-automatic, sensitive, and tool-preserving sawing operations. — Features • Hydraulic saw feed • Rotary table as material support • Hydraulic material clamping • Infinitely variable cutting speed • Mitre cuts to both sides from +60° to -45° — Technical data • Dimensions (L × W × H): 760 × 1620 × 2040 mm • Material support height: 950 mm • Total weight: 510 kg • Total power: 2 kW • Cutting speed: 20 – 110 m/min • Saw band dimensions: 3,180 × 27 × 0.9 mm • Saw band guides: Side and back roller guides, replaceable • Material clamping: Mechanical • Saw feed: Hydraulic, continuously adjustable • Saw band tension: Mechanical • Saw band cleaning: Fitted with a replaceable wire brush — Cutting capacities • 90° round (solid/pipe): 160 / 260 mm • 90° flat (W × H) (pipe): 310 × 260 mm • 90° square (solid/pipe): 160 × 160 / 260 × 260 mm • +45° round (pipe): 220 mm • +45° flat (W × H) (pipe): 200 × 200 mm • +60° round (pipe): 140 mm • +60° flat (W × H) (pipe): 140 × 140 mm • -45° round (pipe): 240 mm • -45° flat (W × H) (pipe): 200 × 260 mm • -45° square (pipe): 210 × 210 mm • Minimum remnant length: 30 mm — Condition & Delivery The machine is in perfect working condition and ready for immediate use. • Shipping on a pallet by freight forwarder possible Europe-wide • Additional machines available – check our listings for more offers — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices plus VAT. Subject to change and errors excepted. Ibsdpexizabsfx Aacsc

Condition: good (used), Year of construction: 2006, Round cutting area: 260 mm Square cutting area: 260 x 260 mm Smallest diameter to be sawn: Ø 10 mm Smallest cutting length: 5 mm Minimum remaining piece length, single cut: 10 mm Minimum remaining piece length, automatic operation: 110 mm Single automatic material feed max.: 680 mm Multiple material feed: 9,999.9 mm Belt speed: continuously adjustable 15 -125 m/min Cutting feed: continuously adjustable Material feed: ball screw Automatic feed: with feed vice (Sp II) Ibsdpfxevzqims Aacoc Material clamping: hydraulic, continuously adjustable. Clamping force: Machine vice (Sp 1) approx. 150 - 800 daN Feed vice (Sp II) approx. 150 - 800 daN Saw blade dimensions Standard: 4115x41x1.3mm Saw blade guide: hard metal, replaceable Saw blade tension: hydraulic Saw blade cleaning: using easily replaceable wire brush. Driven by flex shaft in proportion to the main drive. Coolant: supply via coolant nozzle Volume of coolant tank approx. 110 l Pump output approx. 50 l/min including roller conveyor (6m)

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V Isdpfx Aez N Amsacsbc sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Year of construction: 1998, condition: ready for operation (used), General Data Machine weight 2200 kg Media Chip conveyor Yes Additional Equipment Accessories: 18 saw bands (see photos) Ibodoxbumxopfx Aacec This KASTO SSB 260 VA-CC-CNC Metal Band Saw was manufactured in 1998. A reliable choice for your cutting needs, it offers precision and durability. Consider the opportunity to buy this KASTO SSB 260 VA-CC-CNC Metal Band Saw. Contact us for more information. Application Types Sawing

Condition: good (used), Year of construction: 2011, Smallest diameter 10 mm Shortes length singel stroke 15 mm Shortes length automatic mode 100 mm Working height 700 mm Max. stroke 9999 mm Touch screen 6.4" color screen Isdpfew Ryg Rsx Aacsbc Memory 99 program with  Bundel clamp device  New price 45.000 Capacity 90°: 260° Cutting flat 90°: 260 x 260mm Feed single stroke: 750mm Feed multiple stroke:7500mm Min. cutting length:100mm Cutting speed Vario:20 - 110 Circle blade size: 4530 x 34 x 1,1mm Power: 5kW Length: 1800mm Width: 2150mm Height: 1600mm Weight: 1700kg

Condition: good (used), Year of construction: 2005, Round cutting area: 260 mm Square cutting area: 260 x 260 mm Smallest diameter to be sawn: Ø 10 mm Smallest cutting length: 5 mm Minimum remaining piece length, single cut: 10 mm Minimum remaining piece length, automatic operation: 110 mm Single automatic material feed max.: 680 mm Multiple material feed: 9,999.9 mm Belt speed: continuously adjustable 15 -125 m/min Cutting feed: continuously adjustable Material feed: ball screw Automatic feed: with feed vice (Sp II) Material clamping: hydraulic, continuously adjustable. Clamping force: Machine vice (Sp 1) approx. 150 - 800 daN Feed vice (Sp II) approx. 150 - 800 daN Saw blade dimensions Ibsdju R I A Hspfx Aacsc Standard: 4115x41x1.3mm Saw blade guide: hard metal, replaceable Saw blade tension: hydraulic Saw blade cleaning: using easily replaceable wire brush. Driven by flex shaft in proportion to the main drive. Coolant: supply via coolant nozzle Volume of coolant tank approx. 110 l Pump output approx. 50 l/min including roller conveyor

Condition: good (used), Fully automatic with miter cut, Max. Diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, Automatic feed single 600 mm, max. feed length multiple 1800 mm, Minimum offcut length for single cut 20 mm, minimum offcut length for automatic operation 110 mm, Table rotation range for mitre cut 135 degrees, Total drive power 3.2 kW, Weight without roller conveyors 1100 kg, coolant system, the saw is still under power, Ibedpstqdvgjfx Aacoc Functional video available, Operating instructions with circuit diagrams and spare parts lists.