Used Vks for sale (84)

Year of construction: 2002, condition: used, Vertical circular saw Make : Berg + Schmid Model : VKS 370 A year of construction : 2002 used Technical data: Cutting range saw blade 350 mm 90° round 110 mm/square 85x85 mm/ flat material 180x85 mm 45° Re round 105/square/85x85/ Flat material 130x85 mm 45° Lks round 110/square 85x85 mm/ Flat material 130x85 mm 60° round 105/square 85x85/ flat material 90x85 mm max. saw bladeØ 370 mm speeds 2 speeds 15-70 rpm. motor power 1,5/2,2 kW 400 V dimensions: WxDxxH 1800x1200x2100 mm Weight without coolant 710 kg Hfodjmu Al Aopfx Afnec Accessories: Coolmatic incl. short roller conveyor 1000 mm

Condition: used, Year of construction: 2018, Overview  This fill level and closure inspection machine was manufactured in 2010 by German company KHS. The operation view will be done with the label inspection machine from Indspect. It is designed for checking the fill height, closure and label of full bottles. The machine was running until January 2025 and is now stored in the company. Technical data Capacity: up to 25,000 bph Scope of Delivery  Fill level and closure inspection system | KHS Label inspection system | Indspect Hsdpewhw Sgjfx Afnefc

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm Hfedpfxju Nilyj Afnjc range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel *

Year of construction: 1999, condition: ready for operation (used), Saw blade diameter: 350mm, cutting range at 90°: round: 110mm, square: 85mm/85mm, flat: 180mm/85mm, cutting range at 45°: round left/right: 105mm/110mm, square left/right: 85mm x 85mm/85mm x 85mm, flat left/right: 130mm x 85mm/130mm x 85mm. Saw blade bore: 40mm, speed: 74rpm, working height: 925mm. Dimensions X/Y/Z: 1150mm/1500mm/2100mm, weight: approx. 500kg. Hodjtufcdspfx Afnjfc

Year of construction: 1995, condition: excellent (used), Very well maintained pre-cutting circular saw for side goods. With hydraulic power unit and accumulator, double clamping hydr. Attachment kit with measuring roller for riving knife. Electric control cabinet with control. Control panel with digital dimension input and operation. Photos show original condition. Hfsdpfx Afeh Eyqvenec

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Hodpfevtpq Hex Afnofc Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, Year of construction: 2010, saw blade diameter 315 mm dimensions of saw-blade 350 x 40 x 2,5 mm cutting diameter 90 mm capacity 90 degrees: flat 150 x 90 mm capacity 45 degrees: round rechts & links 90 mm capacity 45 degrees: flat rechts & links 105 x 90 mm capacity 60 degrees: round 90 mm capacity 60 degrees: flat 75 x 70 mm cutting speed 33 / 66 m/min Hfodpsv Td Hvofx Afnec total power requirement 1,8 kW weight of the machine ca. 340 kg dimensions of the machine ca. 900 x 800 x 1700 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Saw blade - Machine base - Operating instructions

Condition: new, Year of construction: 2025, saw blade diameter 370 x 3,0 x 40 mm cutting diameter 120 mm stroke -- mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 180 x 100 mm capacity 45 degrees: round li. 120 / re. 105 mm capacity 45 degrees: square li. 100 / re. 100 mm capacity 45 degrees: flat li. 130x100 / re . 130x10 mm capacity 60 degrees: round 110 mm capacity 60 degrees: square 90 mm capacity 60 degrees: flat 90 x 100 mm total power requirement 1,8 / 2,2 kW weight of the machine ca. 392 kg dimensions of the machine ca. 700 x 900 x 1800 mm Description: - Mitre left 60° + right 45° - Clamping block with double clamping arm - Robust prism guide for the saw head (adjustable dovetail guide) Hfsdpfx Ajvuz Rnefnoc - Chip brush - Automatic cooling - Metal handle for high clamping force - Solid, strong cast iron table

Year of construction: 1992, condition: used, well maintained pre-cut circular saw only 7 years in operation With 2 x 6,7 KW flat motors / saw motors Hydraulic linear adjustment up and down. Hfsdpfx Aecwry Asfnoc Width adjustment via ball screw.

Condition: new, Year of construction: 2024, saw blade diameter: 315 mm, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, rotational speed (min.): 17 rpm, rotational speed (max.): 33 rpm, BERG+SCHMID vertical circular saw model VKS 315 Speed: 17+33 rpm - Miter left 60° + right 45° - Clamping vice with double clamping arm (4-fold fixed) for low-burr cuts and quick lateral movement - Saw table with large turntable and particularly stable vice for optimum material clamping - Robust prismatic guide of the saw head Hedpfx Afsrrvn Asnsfc (adjustable dovetail guide) - Automatic cooling system - Machine base frame with chip drawer - Metal handle for high clamping force - Counter holder with spring assembly a. Saw blade dimensions: 315x40mm Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Year of construction: 2019, condition: ready for operation (used), Additional Equipment Starter Kit 1 consisting of 2 circular saw blades and 10 liters of coolant concentrate. Leveling element (1 set = 4 pieces) with stud bolt M 12x100. Feed side – left. Feed roller conveyor URB 290, Length 3000 mm. Feed adapter for URB 290/400. Hjdpfx Aex Nr Sqsfnsfc Outfeed roller conveyor URB 290, Length 2000 mm. Removal adapter for URB 290/400. Connecting piece for machine, attachment on the right. LM 55 M/man. Length stop, Measuring length 2000 mm. This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information. Application Types Sawing

Condition: new, Röhm KFB ND25 VKS core mandrel 396268A ,unused, 100% functional, scope of delivery according to photos Hedpoi Ec Dqofx Afnofc

Condition: used, Year of construction: 2005, functionality: unexamined, Auction: Plant Closure Roschmann, Gersthofen (Augsburg) Place your bid now – Sale to the highest bidder. Hfodpfsx N Nlbsx Afnsc Lot 2910020: Lot consisting of 1 used metal circular saw with 2 speeds in good condition. Shows moderate wear from industrial use. Features: manual control, integrated vice, speeds: 30/60 rpm. Electrical data: 400 V, 50 Hz, 3-phase.

Condition: excellent (used), Saw blade Ø: 370 mm Cutting capacity at 90° round: 120 mm square: 100 mm Hfsdpfxsx Ek A Te Afnsc rectangular: 180 x 100 mm at 45° round: 120 mm square: 100 mm at 60° round: 110 mm square: 90 mm 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Required space: 1000 x 1000 x 1800 mm Weight: 390 kg

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: Hfodpfx Afjxcngnsnsc The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW Hfedpfx Asd Iin Hsfnsc weight of the machine ca. 0,71 t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: new, saw blade diameter 315 mm capacity 90 degrees: round 108 mm capacity 90 degrees: square 93 mm 150 x 90 mm Working height 920 mm saw blade turning speeds 17+33 oder 33+66 U/min Hodpfjd Iin Rex Afnofc total power requirement 1,5/1,8 kW weight of the machine ca. 0,36 t dimensions of the machine ca. 0,8x0,9x1,95 m SPECIAL PRICE!!! High-performance vertical circular saw VKS 315 HA (20154/20155) • miter left 60° + right 45° • Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift • Saw table with large rotating plate and particularly stable vice for optimal material tension • Robust prism guide of the saw head (dovetail guide adjustable) • Automatic cooling • Machine base with chip drawer • Metal handle for high clamping force • Spring package Semi-automatic function: 1. Saw starts 2. Clamp material 3. Rapid lowering to the beginning of the material or cut the same for series cutting 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise ATTENTION: Price is without saw blade!!! (saw blade price EUR 109)

Condition: new, saw blade diameter 315 mm capacity 90 degrees: round 108 mm Hfodpfx Asd Iin Sofnec capacity 90 degrees: square 93 mm 150 x 90 mm Working height 920 mm saw blade turning speeds 17+33 oder 33+66 U/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,328 t dimensions of the machine ca. 0,8x0,9x1,7 m ACTION PRICE!!! High-performance vertical circular saw VKS 315 (Article 20150) • miter left 60° + right 45° • Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift • Saw table with large rotating plate and particularly stable vice for optimal material tension • Robust prism guide of the saw head (dovetail guide adjustable) • Automatic cooling • Machine base with chip drawer • Metal handle for high clamping force ATTENTION: Price is without saw blade!!! (saw blade price EUR 109)

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 17 - 70 U/min total power requirement 3,0 kW weight of the machine ca. t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m SPECIAL PRICE!!! High-performance vertical circular saw Hydropneumatic fully automatic. (20195) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter Hsdpod Iin Eefx Afnjfc · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood CNC control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15+30 oder 30+60 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,44 t dimensions of the machine ca. 0,8 x 1,1 x 2,1 m Hfedpfx Afjd Iin Isnoc SPECIAL PRICE!!! High-performance vertical circular saw Hydropneumatic semi-automatic. (20185/ 20188) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal tension wheel for high power transmission c. · Solid, strong cast iron table Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the beginning of the material or cut the same for series cutting 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: used, Year of construction: 1991, Schmidt sweeper without drive shaft, without swivel cylinder, storage location: none Hodpfxjxmggno Afnofc

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 370 mm, Vertical Mitre Circular Saw Semi-Automatic - Hydro-pneumatic control of the saw head - Max. saw blade diameter up to 370 mm - Mitre cuts: 60° left and 45° right - Stationary base frame with large chip drawer and automatic coolant system - Pneumatic vice - Vice with double clamping arm for low-burr cuts and lateral quick-shift - Switchgear according to VDE 0113 - Rotational speed: 15 + 30 rpm - Clamping pressure regulation Hfsdpfoxxiv Njx Afnsc Cutting range: 90° Round: 120 mm / Rectangular: 180 x 100 mm 45° Round: 120 mm / Rectangular: 130 x 100 mm 60° Round: 110 mm / Rectangular: 90 x 100 mm Accessories: 2 m outfeed roller conveyor with manual length stop

Condition: good (used), Year of construction: 2011, From a company liquidation: Berg und Schmid VKS 370 HA Year of manufacture 2011 Semi-automatic machine 4-meter roller conveyor left + right Hjdpowa Ecqsfx Afnofc Left stop with digital length measuring system, adjustable via handwheel Cutting capacity with a 370mm saw blade: Round 120mm - Square 100mm - Rectangle 180x100mm at 90° at 60°: Round 110mm - Square 90mm - Rectangle 90x100mm Miter cuts left up to 60° - right up to 45° Saw blade mount 40mm Saw blade speed 15-70 rpm 380 volts Coolant pump Semi-automatic function: 1. Clamp the material 2. Saw starts 3. Lower at rapid traverse to the beginning of the material or cut immediately for serial cutting 4. Remove the saw blade 5. Raise the frame until just above the material 6. Open the clamping jaw

Condition: good (used), Year of construction: 2002, machine/vehicle number: 022885001, Offer 24342 Technical data: - Fully automatic machine with hydropneumatic feed and MPS control system - with pre-programmable work cycles with infinitely variable speed regulation - Particularly suitable for stainless steel cuts Hedpfst N Rk Nex Afnofc - Workpiece clamping in pneumatic machine vice - Saw blade diameter 370 mm - Cutting speeds infinitely variable 15 - 70 1/min - Miter adjustable Right up to 45°, left up to 45 - 60° - Cutting range at 90° around 130 mm - Rectangle 180 x 100 mm - Square 120 x 110 mm - mitred at 45° around 130 mm - Rectangle 120 x 100 mm - Largest opening width of the pneum. Machine vice 160 mm - Drive 400 V / 3 kW - pneumatic connection 6 - 8 bar - Coolant device - infeed - roller conveyor 1000 mm - Discharge - roller conveyor with stop + digital measuring device 4000 mm - Space requirement approx. W 7500 x H 2050 x D 1100 mm - Weight approx. 1200 kg

Condition: used, Miter left 60° + right 45° Hydropneumatic control of the saw unit Electropneumatic material feed unit Smooth-running, high-performance worm drive with a large gear ratio, integrated into a robust cast housing for optimal cutting results Clamping fixture with double clamping arm for burr-minimized cuts, additionally featuring a lateral quick-shift for miter changes Precision prism guide for the gearbox head, laterally adjustable Especially stable base frame with integrated automatic cooling and large chip drawer Hfsdpexfr Nljfx Afnjc CNC control: By entering various parameters such as quantity and material length, the CNC version is the ideal solution to optimize workflows.